summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
authorVadim Bendebury <vbendeb@chromium.org>2014-05-27 18:03:38 -0700
committerMarc Jones <marc.jones@se-eng.com>2015-01-03 20:02:37 +0100
commit24a53dddb9b0b545ab9208722ff7b684114b4e91 (patch)
treebffd2066158aa26568c31578acb784a17feeef3a /src/soc
parent0780d67ffe8ef754ace0912114e2b1e772554990 (diff)
downloadcoreboot-24a53dddb9b0b545ab9208722ff7b684114b4e91.tar.xz
ipq806x: clean up UART driver tx_byte function
The driver as it was copied from u-boot provided a function to transmit multiple characters in one invocation. This feature was not ported to coreboot, there is no need to maintain the complexity when only one character at a time is transmitted. It is also very desirable to get rid of a 1024 byte array allocated on the stack. The array was necessary to allow to convert multiple newline characters in the transmit data flow into two character sequences CRLF. Now just a single word is enough to keep one or two characters to transmit. [EDIT km: newline translation is now part of printk] BUG=chrome-os-partner:27784 TEST=verified that coreboot with the new code prints generates console output. Original-Change-Id: I73869c5f4ca87210b34811b583386554bafff1e7 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201782 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit eab3dc9d30c7e8355a2563e18ada78e4070e6151) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4274b8f7188bf9636906b39bcd9ec7adf0e1222e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8011 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/qualcomm/ipq806x/include/ipq_uart.h9
-rw-r--r--src/soc/qualcomm/ipq806x/uart.c118
2 files changed, 12 insertions, 115 deletions
diff --git a/src/soc/qualcomm/ipq806x/include/ipq_uart.h b/src/soc/qualcomm/ipq806x/include/ipq_uart.h
index da943b909a..90ca7047a2 100644
--- a/src/soc/qualcomm/ipq806x/include/ipq_uart.h
+++ b/src/soc/qualcomm/ipq806x/include/ipq_uart.h
@@ -38,15 +38,6 @@
((value << (32 - end_pos))\
>> (32 - (end_pos - start_pos)))
-
-#define PACK_CHARS_INTO_WORDS(a, cnt, word) { \
- word = 0; \
- int j; \
- for(j=0; j < (int)cnt; j++) { \
- word |= (a[j] & 0xff)<< (j * 8);\
- } \
- }
-
extern void __udelay(unsigned long usec);
diff --git a/src/soc/qualcomm/ipq806x/uart.c b/src/soc/qualcomm/ipq806x/uart.c
index f7b5d0295e..4989247f33 100644
--- a/src/soc/qualcomm/ipq806x/uart.c
+++ b/src/soc/qualcomm/ipq806x/uart.c
@@ -192,108 +192,23 @@ msm_boot_uart_dm_read(unsigned int *data, int *count, int wait)
}
#endif
-/**
- * msm_boot_uart_replace_lr_with_cr - replaces "\n" with "\r\n"
- * @data_in: characters to be converted
- * @num_of_chars: no. of characters
- * @data_out: location where converted chars are stored
- *
- * Replace linefeed char "\n" with carriage return + linefeed
- * "\r\n". Currently keeping it simple than efficient.
- */
-static unsigned int
-msm_boot_uart_replace_lr_with_cr(unsigned char *data_in,
- int num_of_chars,
- char *data_out, int *num_of_chars_out)
+void uart_tx_byte(int idx, unsigned char data)
{
- int i = 0, j = 0;
-
- if ((data_in == NULL) || (data_out == NULL) || (num_of_chars < 0))
- return MSM_BOOT_UART_DM_E_INVAL;
-
- for (i = 0, j = 0; i < num_of_chars; i++, j++) {
- if (data_in[i] == '\n')
- data_out[j++] = '\r';
-
- data_out[j] = data_in[i];
- }
-
- *num_of_chars_out = j;
-
- return MSM_BOOT_UART_DM_E_SUCCESS;
-}
-
-/**
- * msm_boot_uart_dm_write - transmit data
- * @data: data to transmit
- * @num_of_chars: no. of bytes to transmit
- *
- * Writes the data to the TX FIFO. If no space is available blocks
- * till space becomes available.
- */
-static unsigned int
-msm_boot_uart_dm_write(unsigned char *data, unsigned int num_of_chars)
-{
- unsigned int tx_word_count = 0;
- unsigned int tx_char_left = 0, tx_char = 0;
- unsigned int tx_word = 0;
- int i = 0;
- char *tx_data = NULL;
- char new_data[1024];
unsigned int base = uart_board_param.uart_dm_base;
- if ((data == NULL) || (num_of_chars <= 0))
- return MSM_BOOT_UART_DM_E_INVAL;
-
- /* Replace line-feed (/n) with carriage-return + line-feed (/r/n) */
- msm_boot_uart_replace_lr_with_cr(data, num_of_chars, new_data, &i);
+ /* Wait until transmit FIFO is empty. */
+ while (!(readl_i(MSM_BOOT_UART_DM_SR(base)) &
+ MSM_BOOT_UART_DM_SR_TXEMT))
+ udelay(1);
- tx_data = new_data;
- num_of_chars = i;
-
- /* Write to NO_CHARS_FOR_TX register number of characters
- * to be transmitted. However, before writing TX_FIFO must
- * be empty as indicated by TX_READY interrupt in IMR register
- */
- /* Check if transmit FIFO is empty.
- * If not we'll wait for TX_READY interrupt. */
-
- if (!(readl_i(MSM_BOOT_UART_DM_SR(base)) & MSM_BOOT_UART_DM_SR_TXEMT)) {
- while (!(readl_i(MSM_BOOT_UART_DM_ISR(base)) &
- MSM_BOOT_UART_DM_TX_READY))
- udelay(1);
- }
-
- /* We are here. FIFO is ready to be written. */
- /* Write number of characters to be written */
- writel_i(num_of_chars, MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base));
-
- /* Clear TX_READY interrupt */
- writel_i(MSM_BOOT_UART_DM_GCMD_RES_TX_RDY_INT,
- MSM_BOOT_UART_DM_CR(base));
-
- /* We use four-character word FIFO. So we need to divide data into
- * four characters and write in UART_DM_TF register */
- tx_word_count = (num_of_chars % 4) ? ((num_of_chars / 4) + 1) :
- (num_of_chars / 4);
- tx_char_left = num_of_chars;
-
- for (i = 0; i < (int)tx_word_count; i++) {
- tx_char = (tx_char_left < 4) ? tx_char_left : 4;
- PACK_CHARS_INTO_WORDS(tx_data, tx_char, tx_word);
-
- /* Wait till TX FIFO has space */
- while (!(readl_i(MSM_BOOT_UART_DM_SR(base)) &
- MSM_BOOT_UART_DM_SR_TXRDY))
- udelay(1);
-
- /* TX FIFO has space. Write the chars */
- writel_i(tx_word, MSM_BOOT_UART_DM_TF(base, 0));
- tx_char_left = num_of_chars - (i + 1) * 4;
- tx_data = tx_data + 4;
- }
+ /*
+ * TX FIFO is ready to accept new character(s). First write number of
+ * characters to be transmitted.
+ */
+ writel_i(1, MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base));
- return MSM_BOOT_UART_DM_E_SUCCESS;
+ /* And now write the character(s) */
+ writel_i(data, MSM_BOOT_UART_DM_TF(base, 0));
}
/*
@@ -419,15 +334,6 @@ uint32_t uartmem_getbaseaddr(void)
#endif
/**
- * uart_tx_byte - transmits a character
- * @c: character to transmit
- */
-void uart_tx_byte(int idx, unsigned char c)
-{
- msm_boot_uart_dm_write(&c, 1);
-}
-
-/**
* uart_tx_flush - transmits a string of data
* @s: string to transmit
*/