summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
authorJohn Zhao <john.zhao@intel.com>2020-06-07 09:20:01 -0700
committerDuncan Laurie <dlaurie@chromium.org>2020-06-10 17:27:02 +0000
commitf74aa649b1be2ea7e9d4e25d6072fb7dc7f9f903 (patch)
treeadf94f3fdf027c8a0a019cbc09222484e25a48e2 /src/soc
parenta6e3b5ac093a4d9781fc83b75a14d1c47b92b6ef (diff)
downloadcoreboot-f74aa649b1be2ea7e9d4e25d6072fb7dc7f9f903.tar.xz
soc/intel/tigerlake: Add Hot-Plug and PME event handlers for Thunderbolt
This change adds Hot-Plug and power management event handers(_L61 & _L69) respectively for Thunderbolt in the GPE scope. The _L61 method invokes sub-method HPEV to support Hot-Plug wake event from Thunderbolt PCIe root ports. This method intercepts Presence Detect Changed interrupt and make sure the L0s is disabled on empty slots. The _L69 method checks and clears root port's PME SCI status. BUG=b:156435065 TEST=Verified multiple hot plug successfully with Lenovo dock. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I022cf4aa3f2ee459b9dc87849494e10755d995c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/tigerlake/acpi/tcss.asl351
1 files changed, 237 insertions, 114 deletions
diff --git a/src/soc/intel/tigerlake/acpi/tcss.asl b/src/soc/intel/tigerlake/acpi/tcss.asl
index abdcb515fa..48f2689799 100644
--- a/src/soc/intel/tigerlake/acpi/tcss.asl
+++ b/src/soc/intel/tigerlake/acpi/tcss.asl
@@ -38,7 +38,7 @@ Scope (\_SB)
Method (BASE, 1)
{
Local0 = Arg0 & 0x7 /* Function number */
- Local1 = (Arg0 >> 16) & 0x1F /* Device number */
+ Local1 = (Arg0 >> 16) & 0x1F /* Device number */
Local2 = (Local0 << 12) + (Local1 << 15)
Local3 = \_SB.PCI0.GPCB() + Local2
Return (Local3)
@@ -128,6 +128,127 @@ Scope (\_SB)
}
}
+Scope (_GPE)
+{
+ /* PCI Express Hot-Plug wake event */
+ Method (_L61, 0, NotSerialized)
+ {
+ /*
+ * Delay for 100ms to meet the timing requirements of the PCI Express Base
+ * Specification, Revision 1.0A, Section 6.6 ("...software must wait at least
+ * 100ms from the end of reset of one or more device before it is permitted
+ * to issue Configuration Requests to those devices").
+ */
+ Sleep (100)
+
+ If (CondRefOf (\_SB.PCI0.TXHC)) {
+ /* Invoke PCIe root ports wake event handler */
+ \_SB.PCI0.TRP0.HPEV()
+ \_SB.PCI0.TRP1.HPEV()
+ \_SB.PCI0.TRP2.HPEV()
+ \_SB.PCI0.TRP3.HPEV()
+ }
+
+ /* Check Root Port 0 for a Hot Plug Event if the port is enabled */
+ If (((\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP0.HPSX)) {
+ If (\_SB.PCI0.TRP0.PDCX) {
+ /* Clear all status bits */
+ \_SB.PCI0.TRP0.PDCX = 1
+ \_SB.PCI0.TRP0.HPSX = 1
+ /*
+ * Intercept Presence Detect Changed interrupt and make sure
+ * the L0s is disabled on empty slots.
+ */
+ If (!\_SB.PCI0.TRP0.PDSX) {
+ /*
+ * The PCIe slot is empty, so disable L0s on hot unplug.
+ */
+ \_SB.PCI0.TRP0.L0SE = 0
+ }
+ /* Performs proper notification to the OS. */
+ Notify (\_SB.PCI0.TRP0, 0)
+ } Else {
+ /* False event. Clear Hot-Plug status, then exit. */
+ \_SB.PCI0.TRP0.HPSX = 1
+ }
+ }
+
+ /* Check Root Port 1 for a Hot Plug Event if the port is enabled */
+ If (((\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP1.HPSX)) {
+ If (\_SB.PCI0.TRP1.PDCX) {
+ \_SB.PCI0.TRP1.PDCX = 1
+ \_SB.PCI0.TRP1.HPSX = 1
+ If (!\_SB.PCI0.TRP1.PDSX) {
+ \_SB.PCI0.TRP1.L0SE = 0
+ }
+ Notify (\_SB.PCI0.TRP1, 0)
+ } Else {
+ \_SB.PCI0.TRP1.HPSX = 1
+ }
+ }
+
+ /* Check Root Port 2 for a Hot Plug Event if the port is enabled */
+ If (((\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP2.HPSX)) {
+ If (\_SB.PCI0.TRP2.PDCX) {
+ \_SB.PCI0.TRP2.PDCX = 1
+ \_SB.PCI0.TRP2.HPSX = 1
+ If (!\_SB.PCI0.TRP2.PDSX) {
+ \_SB.PCI0.TRP2.L0SE = 0
+ }
+ Notify (\_SB.PCI0.TRP2, 0)
+ } Else {
+ \_SB.PCI0.TRP2.HPSX = 1
+ }
+ }
+
+ /* Check Root Port 3 for a Hot Plug Event if the port is enabled */
+ If (((\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP3.HPSX)) {
+ If (\_SB.PCI0.TRP3.PDCX) {
+ \_SB.PCI0.TRP3.PDCX = 1
+ \_SB.PCI0.TRP3.HPSX = 1
+ If (!\_SB.PCI0.TRP3.PDSX) {
+ \_SB.PCI0.TRP3.L0SE = 0
+ }
+ Notify (\_SB.PCI0.TRP3, 0)
+ } Else {
+ \_SB.PCI0.TRP3.HPSX = 1
+ }
+ }
+ }
+
+ /* PCI Express power management event */
+ Method (_L69, 0, Serialized)
+ {
+ If (CondRefOf (\_SB.PCI0.TXHC)) {
+ If (\_SB.PCI0.TRP0.HPME() == 1) {
+ Notify (\_SB.PCI0.TDM0, 0x2)
+ Notify (\_SB.PCI0.TRP0, 0x2)
+ }
+
+ If (\_SB.PCI0.TRP1.HPME() == 1) {
+ Notify (\_SB.PCI0.TDM0, 0x2)
+ Notify (\_SB.PCI0.TRP1, 0x2)
+ }
+
+ If (\_SB.PCI0.TRP2.HPME() == 1) {
+ Notify (\_SB.PCI0.TDM1, 0x2)
+ Notify (\_SB.PCI0.TRP2, 0x2)
+ }
+
+ If (\_SB.PCI0.TRP3.HPME() == 1) {
+ Notify (\_SB.PCI0.TDM1, 0x2)
+ Notify (\_SB.PCI0.TRP3, 0x2)
+ }
+ }
+
+ /* Invoke PCIe root ports power management status handler */
+ \_SB.PCI0.TRP0.HPME()
+ \_SB.PCI0.TRP1.HPME()
+ \_SB.PCI0.TRP2.HPME()
+ \_SB.PCI0.TRP3.HPME()
+ }
+}
+
Scope (\_SB.PCI0)
{
/*
@@ -320,48 +441,49 @@ Scope (\_SB.PCI0)
{
If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) {
Printf("TDM0 does not exist.")
- }
-
- If (\_SB.PCI0.TDM0.STAT == 0) {
- /* DMA0 is in D3Cold early. */
- \_SB.PCI0.TDM0.D3CX() /* RTD3 Exit */
-
- Printf("Bring TBT RPs out of D3Code.")
- If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) {
- /* RP0 D3 cold exit. */
- \_SB.PCI0.TRP0.D3CX()
- }
- If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) {
- /* RP1 D3 cold exit. */
- \_SB.PCI0.TRP1.D3CX()
- }
-
- /*
- * Need to send Connect-Topology command when TBT host
- * controller back to D0 from D3.
- */
- If (\_SB.PCI0.TDM0.ALCT == 1) {
- If (CTP0 == 1) {
- /*
- * Send Connect-Topology command if there is
- * device present on PCIe RP.
- */
- \_SB.PCI0.TDM0.CNTP()
-
- /* Indicate to wait Connect-Topology command. */
- \_SB.PCI0.TDM0.WACT = 1
+ } Else {
+ If (\_SB.PCI0.TDM0.STAT == 0) {
+ /* DMA0 is in D3Cold early. */
+ \_SB.PCI0.TDM0.D3CX() /* RTD3 Exit */
+
+ Printf("Bring TBT RPs out of D3Code.")
+ If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) {
+ /* RP0 D3 cold exit. */
+ \_SB.PCI0.TRP0.D3CX()
+ }
+ If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) {
+ /* RP1 D3 cold exit. */
+ \_SB.PCI0.TRP1.D3CX()
+ }
- /* Clear the connect states. */
- CTP0 = 0
+ /*
+ * Need to send Connect-Topology command when TBT host
+ * controller back to D0 from D3.
+ */
+ If (\_SB.PCI0.TDM0.ALCT == 1) {
+ If (CTP0 == 1) {
+ /*
+ * Send Connect-Topology command if there is
+ * device present on PCIe RP.
+ */
+ \_SB.PCI0.TDM0.CNTP()
+
+ /* Indicate to wait Connect-Topology command. */
+ \_SB.PCI0.TDM0.WACT = 1
+
+ /* Clear the connect states. */
+ CTP0 = 0
+ }
+ /* Disallow to send Connect-Topology command. */
+ \_SB.PCI0.TDM0.ALCT = 0
}
- /* Disallow to send Connect-Topology command. */
- \_SB.PCI0.TDM0.ALCT = 0
+ } Else {
+ Printf("Drop TG0N due to it is already exit D3 cold.")
}
- } Else {
- Printf("Drop TG0N due to it is already exit D3 cold.")
+
+ /* TBT RTD3 exit 10ms delay. */
+ Sleep (10)
}
- /* TBT RTD3 exit 10ms delay. */
- Sleep (10)
}
/*
@@ -371,26 +493,26 @@ Scope (\_SB.PCI0)
{
If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) {
Printf("TDM0 does not exist.")
- }
-
- If (\_SB.PCI0.TDM0.STAT == 1) {
- /* DMA0 is not in D3Cold now. */
- \_SB.PCI0.TDM0.D3CE() /* Enable DMA RTD3 */
-
- Printf("Push TBT RPs to D3Cold together")
- If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) {
- If (\_SB.PCI0.TRP0.PDSX == 1) {
- CTP0 = 1
+ } Else {
+ If (\_SB.PCI0.TDM0.STAT == 1) {
+ /* DMA0 is not in D3Cold now. */
+ \_SB.PCI0.TDM0.D3CE() /* Enable DMA RTD3 */
+
+ Printf("Push TBT RPs to D3Cold together")
+ If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) {
+ If (\_SB.PCI0.TRP0.PDSX == 1) {
+ CTP0 = 1
+ }
+ /* Put RP0 to D3 cold. */
+ \_SB.PCI0.TRP0.D3CE()
}
- /* Put RP0 to D3 cold. */
- \_SB.PCI0.TRP0.D3CE()
- }
- If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) {
- If (\_SB.PCI0.TRP1.PDSX == 1) {
- CTP0 = 1
+ If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) {
+ If (\_SB.PCI0.TRP1.PDSX == 1) {
+ CTP0 = 1
+ }
+ /* Put RP1 to D3 cold. */
+ \_SB.PCI0.TRP1.D3CE()
}
- /* Put RP1 to D3 cold. */
- \_SB.PCI0.TRP1.D3CE()
}
}
}
@@ -402,48 +524,49 @@ Scope (\_SB.PCI0)
{
If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) {
Printf("TDM1 does not exist.")
- }
-
- If (\_SB.PCI0.TDM1.STAT == 0) {
- /* DMA1 is in D3Cold early. */
- \_SB.PCI0.TDM1.D3CX() /* RTD3 Exit */
-
- Printf("Bring TBT RPs out of D3Code.")
- If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) {
- /* RP2 D3 cold exit. */
- \_SB.PCI0.TRP2.D3CX()
- }
- If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) {
- /* RP3 D3 cold exit. */
- \_SB.PCI0.TRP3.D3CX()
- }
-
- /*
- * Need to send Connect-Topology command when TBT host
- * controller back to D0 from D3.
- */
- If (\_SB.PCI0.TDM1.ALCT == 1) {
- If (CTP1 == 1) {
- /*
- * Send Connect-Topology command if there is
- * device present on PCIe RP.
- */
- \_SB.PCI0.TDM1.CNTP()
-
- /* Indicate to wait Connect-Topology command. */
- \_SB.PCI0.TDM1.WACT = 1
+ } Else {
+ If (\_SB.PCI0.TDM1.STAT == 0) {
+ /* DMA1 is in D3Cold early. */
+ \_SB.PCI0.TDM1.D3CX() /* RTD3 Exit */
+
+ Printf("Bring TBT RPs out of D3Code.")
+ If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) {
+ /* RP2 D3 cold exit. */
+ \_SB.PCI0.TRP2.D3CX()
+ }
+ If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) {
+ /* RP3 D3 cold exit. */
+ \_SB.PCI0.TRP3.D3CX()
+ }
- /* Clear the connect states. */
- CTP1 = 0
+ /*
+ * Need to send Connect-Topology command when TBT host
+ * controller back to D0 from D3.
+ */
+ If (\_SB.PCI0.TDM1.ALCT == 1) {
+ If (CTP1 == 1) {
+ /*
+ * Send Connect-Topology command if there is
+ * device present on PCIe RP.
+ */
+ \_SB.PCI0.TDM1.CNTP()
+
+ /* Indicate to wait Connect-Topology command. */
+ \_SB.PCI0.TDM1.WACT = 1
+
+ /* Clear the connect states. */
+ CTP1 = 0
+ }
+ /* Disallow to send Connect-Topology cmd. */
+ \_SB.PCI0.TDM1.ALCT = 0
}
- /* Disallow to send Connect-Topology cmd. */
- \_SB.PCI0.TDM1.ALCT = 0
+ } Else {
+ Printf("Drop TG1N due to it is already exit D3 cold.")
}
- } Else {
- Printf("Drop TG1N due to it is already exit D3 cold.")
+
+ /* TBT RTD3 exit 10ms delay. */
+ Sleep (10)
}
- /* TBT RTD3 exit 10ms delay. */
- Sleep (10)
}
/*
@@ -453,26 +576,26 @@ Scope (\_SB.PCI0)
{
If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) {
Printf("TDM1 does not exist.")
- }
-
- If (\_SB.PCI0.TDM1.STAT == 1) {
- /* DMA1 is not in D3Cold now */
- \_SB.PCI0.TDM1.D3CE() /* Enable DMA RTD3. */
-
- Printf("Push TBT RPs to D3Cold together")
- If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) {
- If (\_SB.PCI0.TRP2.PDSX == 1) {
- CTP1 = 1
+ } Else {
+ If (\_SB.PCI0.TDM1.STAT == 1) {
+ /* DMA1 is not in D3Cold now */
+ \_SB.PCI0.TDM1.D3CE() /* Enable DMA RTD3. */
+
+ Printf("Push TBT RPs to D3Cold together")
+ If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) {
+ If (\_SB.PCI0.TRP2.PDSX == 1) {
+ CTP1 = 1
+ }
+ /* Put RP2 to D3 cold. */
+ \_SB.PCI0.TRP2.D3CE()
}
- /* Put RP2 to D3 cold. */
- \_SB.PCI0.TRP2.D3CE()
- }
- If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) {
- If (\_SB.PCI0.TRP3.PDSX == 1) {
- CTP1 = 1
+ If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) {
+ If (\_SB.PCI0.TRP3.PDSX == 1) {
+ CTP1 = 1
+ }
+ /* Put RP3 to D3 cold */
+ \_SB.PCI0.TRP3.D3CE()
}
- /* Put RP3 to D3 cold */
- \_SB.PCI0.TRP3.D3CE()
}
}
}
@@ -536,7 +659,7 @@ Scope (\_SB.PCI0)
}
If (Local0 == TCSS_IOM_ACK_TIMEOUT_IN_MS) {
- Printf("Error: Error: Timeout occurred.")
+ Printf("Error: Timeout occurred.")
}
Else
{