summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
authorV Sowmya <v.sowmya@intel.com>2019-03-19 19:55:14 +0530
committerFurquan Shaikh <furquan@google.com>2019-06-07 18:54:44 +0000
commit3c8c81b1acd06c2145e6f837041a4d1e961b8d05 (patch)
tree8ac7538ff48f3717532468e2c3923a1e3e429263 /src/soc
parent1044ebaa06d8932564fa3ca3b0c4fbd25a63d992 (diff)
downloadcoreboot-3c8c81b1acd06c2145e6f837041a4d1e961b8d05.tar.xz
soc/intel/cannonlake: Add _DSM method for SD controller
The SD controller seems to take some time after restarting the clock at 1.8V before it actually switches from 3.3V to 1.8V. Add a _DSM method that simply sleeps when switching between 3.3V and 1.8V. Otherwise, the kernel times out too quickly waiting for the card to acknowledge the 1.8V switch. The card itself is waiting until it sees the clk signal being driven at 1.8V. BUG=b:125441242 TEST=Boot Hatch with SD card and CR2 removed, observe voltage switch succeeds. Change-Id: I15090ed9f9bc90b35dfcba47c913e3d37b799d0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Signef-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/cannonlake/acpi/scs.asl62
1 files changed, 62 insertions, 0 deletions
diff --git a/src/soc/intel/cannonlake/acpi/scs.asl b/src/soc/intel/cannonlake/acpi/scs.asl
index cdfff911b8..0012a4dfd8 100644
--- a/src/soc/intel/cannonlake/acpi/scs.asl
+++ b/src/soc/intel/cannonlake/acpi/scs.asl
@@ -84,6 +84,7 @@ Scope (\_SB.PCI0) {
Name (_ADR, 0x00140005)
Name (_DDN, "SD Controller")
Name (TEMP, 0)
+ Name (DSUU, ToUUID("f6c13ea5-65cd-461f-ab7a-29f7e8d5bd61"))
OperationRegion (SDPC, PCI_Config, 0x00, 0x100)
Field (SDPC, WordAcc, NoLock, Preserve)
@@ -95,6 +96,67 @@ Scope (\_SB.PCI0) {
PGEN, 1, /* PG_ENABLE */
}
+ /* _DSM x86 Device Specific Method
+ * Arg0: UUID Unique function identifier
+ * Arg1: Integer Revision Level
+ * Arg2: Integer Function Index (0 = Return Supported Functions)
+ * Arg3: Package Parameters
+ */
+ Method (_DSM, 4)
+ {
+ If (LEqual (Arg0, ^DSUU)) {
+ /* Check the revision */
+ If (LGreaterEqual (Arg1, Zero)) {
+ /* Switch statement based on the function index. */
+ Switch (ToInteger (Arg2)) {
+ /*
+ * Function Index 0 the return value is a buffer containing
+ * one bit for each function index, starting with zero.
+ * Bit 0 - Indicates whether there is support for any functions other than function 0.
+ * Bit 1 - Indicates support to clear power control register
+ * Bit 2 - Indicates support to set power control register
+ * Bit 3 - Indicates support to set 1.8V signalling
+ * Bit 4 - Indicates support to set 3.3V signalling
+ * Bit 5 - Indicates support for HS200 mode
+ * Bit 6 - Indicates support for HS400 mode
+ * Bit 9 - Indicates eMMC I/O Driver Strength
+ */
+ /*
+ * For SD we have to support functions to
+ * set 1.8V signalling and 3.3V signalling [BIT4, BIT3]
+ */
+ Case (0) {
+ Return (Buffer () { 0x19 })
+ }
+
+ /*
+ * Function Index 3: Set 1.8v signalling.
+ * We put a sleep of 100ms in this method to
+ * work around a known issue with detecting
+ * UHS SD card on PCH. This is to compensate
+ * for the SD VR slowness.
+ */
+ Case (3) {
+ Sleep (100)
+ Return(Buffer () { 0x00 })
+ }
+ /*
+ * Function Index 4: Set 3.3v signalling.
+ * We put a sleep of 100ms in this method to
+ * work around a known issue with detecting
+ * UHS SD card on PCH. This is to compensate
+ * for the SD VR slowness.
+ */
+ Case (4) {
+ Sleep (100)
+ Return(Buffer () { 0x00 })
+ }
+ }
+ }
+ }
+ Return(Buffer() { 0x0 })
+ }
+
Method(_INI)
{
/* Clear register 0x1C20/0x4820 */