summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cs5536/cs5536.c
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-02-03 13:49:24 +0000
committerPatrick Georgi <patrick.georgi@coresystems.de>2010-02-03 13:49:24 +0000
commit5a559d4386b4f659bfeddffa8f38670e24a35ac0 (patch)
tree2ba497b765b18431b6018af28fc80df360fe71f7 /src/southbridge/amd/cs5536/cs5536.c
parentfa742da56be11090fc713c21bc3faf786d99b135 (diff)
downloadcoreboot-5a559d4386b4f659bfeddffa8f38670e24a35ac0.tar.xz
The UART2 on the AMD cs5536 is incorrectly configured in two places.
GPIO lines 4 and 3 are swapped and also incorrectly put in IR mode receive (compound fault). Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Edwin Beasant <edwin_beasant@virtensys.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd/cs5536/cs5536.c')
-rw-r--r--src/southbridge/amd/cs5536/cs5536.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c
index 89e0cf5951..474424bba6 100644
--- a/src/southbridge/amd/cs5536/cs5536.c
+++ b/src/southbridge/amd/cs5536/cs5536.c
@@ -298,7 +298,7 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
/* Set: OUTAUX1 Select (0x10) */
outl(GPIOL_8_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
- /* GPIO8 - UART1_RX */
+ /* GPIO9 - UART1_RX */
/* Set: Input Enable (0x20) */
outl(GPIOL_9_SET, gpio_addr + GPIOL_INPUT_ENABLE);
/* Set: INAUX1 Select (0x34) */
@@ -356,18 +356,18 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
msr.lo |= sb->com2_irq << 28;
wrmsr(MDD_IRQM_YHIGH, msr);
- /* GPIO4 - UART2_RX */
- /* Set: Output Enable (0x4) */
- outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
- /* Set: OUTAUX1 Select (0x10) */
- outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
-
- /* GPIO3 - UART2_TX */
+ /* GPIO3 - UART2_RX */
/* Set: Input Enable (0x20) */
outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE);
/* Set: INAUX1 Select (0x34) */
outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT);
+ /* GPIO4 - UART2_TX */
+ /* Set: Output Enable (0x4) */
+ outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
+ /* Set: OUTAUX1 Select (0x10) */
+ outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
+
/* Set: GPIO 3 and 4 Pull Up (0x18) */
outl(GPIOL_3_SET | GPIOL_4_SET,
gpio_addr + GPIOL_PULLUP_ENABLE);