summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/rs780
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-03-22 11:42:32 +0000
committerStefan Reinauer <stepan@openbios.org>2010-03-22 11:42:32 +0000
commitc02b4fc9db3c3c1e263027382697b566127f66bb (patch)
tree11bd18488e360e5c1beeb9ccb852ef4489c3689a /src/southbridge/amd/rs780
parent27852aba6787617ca5656995cbc7e8ef0a3ea22c (diff)
downloadcoreboot-c02b4fc9db3c3c1e263027382697b566127f66bb.tar.xz
printk_foo -> printk(BIOS_FOO, ...)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd/rs780')
-rw-r--r--src/southbridge/amd/rs780/rs780.c24
-rw-r--r--src/southbridge/amd/rs780/rs780_cmn.c10
-rw-r--r--src/southbridge/amd/rs780/rs780_early_setup.c42
-rw-r--r--src/southbridge/amd/rs780/rs780_gfx.c54
-rw-r--r--src/southbridge/amd/rs780/rs780_ht.c2
-rw-r--r--src/southbridge/amd/rs780/rs780_pcie.c10
6 files changed, 71 insertions, 71 deletions
diff --git a/src/southbridge/amd/rs780/rs780.c b/src/southbridge/amd/rs780/rs780.c
index b7ec1154ce..471603f865 100644
--- a/src/southbridge/amd/rs780/rs780.c
+++ b/src/southbridge/amd/rs780/rs780.c
@@ -120,9 +120,9 @@ void rs780_nb_pci_table(device_t nb_dev)
/* Program NB PCI table. */
temp16 = pci_read_config16(nb_dev, 0x04);
- printk_debug("NB_PCI_REG04 = %x.\n", temp16);
+ printk(BIOS_DEBUG, "NB_PCI_REG04 = %x.\n", temp16);
temp32 = pci_read_config32(nb_dev, 0x84);
- printk_debug("NB_PCI_REG84 = %x.\n", temp32);
+ printk(BIOS_DEBUG, "NB_PCI_REG84 = %x.\n", temp32);
pci_write_config8(nb_dev, 0x4c, 0x42);
@@ -131,7 +131,7 @@ void rs780_nb_pci_table(device_t nb_dev)
pci_write_config8(nb_dev, 0x4e, temp8);
temp32 = pci_read_config32(nb_dev, 0x4c);
- printk_debug("NB_PCI_REG4C = %x.\n", temp32);
+ printk(BIOS_DEBUG, "NB_PCI_REG4C = %x.\n", temp32);
/* disable GFX debug. */
temp8 = pci_read_config8(nb_dev, 0x8d);
@@ -250,7 +250,7 @@ void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev)
/* Enable PCIe configuration space. */
set_htiu_enable_bits(nb_dev, 0x32, 0, 1<<28);
- printk_info("GC is accessible from now on.\n");
+ printk(BIOS_INFO, "GC is accessible from now on.\n");
}
/***********************************************
@@ -272,7 +272,7 @@ void rs780_enable(device_t dev)
device_t nb_dev = 0, sb_dev = 0;
int dev_ind;
- printk_info("rs780_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev));
+ printk(BIOS_INFO, "rs780_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev));
nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
if (!nb_dev) {
@@ -290,7 +290,7 @@ void rs780_enable(device_t dev)
dev_ind = dev->path.pci.devfn >> 3;
switch (dev_ind) {
case 0: /* bus0, dev0, fun0; */
- printk_info("Bus-0, Dev-0, Fun-0.\n");
+ printk(BIOS_INFO, "Bus-0, Dev-0, Fun-0.\n");
enable_pcie_bar3(nb_dev); /* PCIEMiscInit */
config_gpp_core(nb_dev, sb_dev);
rs780_gpp_sb_init(nb_dev, sb_dev, 8);
@@ -304,12 +304,12 @@ void rs780_enable(device_t dev)
break;
case 1: /* bus0, dev1, APC. */
- printk_info("Bus-0, Dev-1, Fun-0.\n");
+ printk(BIOS_INFO, "Bus-0, Dev-1, Fun-0.\n");
rs780_nb_gfx_dev_table(nb_dev, dev);
break;
case 2: /* bus0, dev2,3, two GFX */
case 3:
- printk_info("Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled);
+ printk(BIOS_INFO, "Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled);
set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind,
(dev->enabled ? 0 : 1) << dev_ind);
if (dev->enabled)
@@ -319,7 +319,7 @@ void rs780_enable(device_t dev)
case 5:
case 6:
case 7:
- printk_info("Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n",
+ printk(BIOS_INFO, "Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n",
dev->enabled);
set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind,
(dev->enabled ? 0 : 1) << dev_ind);
@@ -327,7 +327,7 @@ void rs780_enable(device_t dev)
rs780_gpp_sb_init(nb_dev, dev, dev_ind);
break;
case 8: /* bus0, dev8, SB */
- printk_info("Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled);
+ printk(BIOS_INFO, "Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled);
set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6,
(dev->enabled ? 1 : 0) << 6);
if (dev->enabled)
@@ -336,7 +336,7 @@ void rs780_enable(device_t dev)
break;
case 9: /* bus 0, dev 9,10, GPP */
case 10:
- printk_info("Bus-0, Dev-9, 10, Fun-0. enable=%d\n",
+ printk(BIOS_INFO, "Bus-0, Dev-9, 10, Fun-0. enable=%d\n",
dev->enabled);
enable_pcie_bar3(nb_dev); /* PCIEMiscInit */
set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind),
@@ -346,7 +346,7 @@ void rs780_enable(device_t dev)
/* Dont call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */
break;
default:
- printk_debug("unknown dev: %s\n", dev_path(dev));
+ printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev));
}
}
diff --git a/src/southbridge/amd/rs780/rs780_cmn.c b/src/southbridge/amd/rs780/rs780_cmn.c
index bf27794fc7..ab91074ad2 100644
--- a/src/southbridge/amd/rs780/rs780_cmn.c
+++ b/src/southbridge/amd/rs780/rs780_cmn.c
@@ -48,7 +48,7 @@ u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg)
{
/*get BAR3 base address for nbcfg0x1c */
u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF;
- printk_debug("addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
+ printk(BIOS_DEBUG, "addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
dev->path.pci.devfn);
addr |= dev->bus->secondary << 20 | /* bus num */
dev->path.pci.devfn << 12 | reg;
@@ -61,7 +61,7 @@ void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask
/*get BAR3 base address for nbcfg0x1c */
u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF;
- /*printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
+ /*printk(BIOS_DEBUG, "write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
dev->path.pci.devfn);*/
addr |= dev->bus->secondary << 20 | /* bus num */
dev->path.pci.devfn << 12 | reg_pos;
@@ -271,7 +271,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
mdelay(40);
udelay(200);
lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */
- printk_debug("PcieLinkTraining port=%x:lc current state=%x\n",
+ printk(BIOS_DEBUG, "PcieLinkTraining port=%x:lc current state=%x\n",
port, lc_state);
current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */
@@ -297,7 +297,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
reg |= lane_mask << 8 | lane_mask;
reg = 0xE0E0; /* TODO: See the comments in rs780_pcie.c, at about line 145. */
nbpcie_ind_write_index(nb_dev, 0x65 | gfx_gpp_sb_sel, reg);
- printk_debug("link_width=%x, lane_mask=%x",
+ printk(BIOS_DEBUG, "link_width=%x, lane_mask=%x",
current_link_width, lane_mask);
set_pcie_reset();
mdelay(1);
@@ -311,7 +311,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
reg =
pci_ext_read_config32(nb_dev, dev,
PCIE_VC0_RESOURCE_STATUS);
- printk_debug("PcieTrainPort reg=0x%x\n", reg);
+ printk(BIOS_DEBUG, "PcieTrainPort reg=0x%x\n", reg);
/* check bit1 */
if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */
/* set bit8=1, bit0-2=bit4-6 */
diff --git a/src/southbridge/amd/rs780/rs780_early_setup.c b/src/southbridge/amd/rs780/rs780_early_setup.c
index 5b9616f3ca..159d51f52e 100644
--- a/src/southbridge/amd/rs780/rs780_early_setup.c
+++ b/src/southbridge/amd/rs780/rs780_early_setup.c
@@ -147,25 +147,25 @@ static void get_cpu_rev()
u32 eax;
eax = cpuid_eax(1);
- printk_info("get_cpu_rev EAX=0x%x.\n", eax);
+ printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax);
if (eax <= 0xfff)
- printk_info("CPU Rev is K8_Cx.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_Cx.\n");
else if (eax <= 0x10fff)
- printk_info("CPU Rev is K8_Dx.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_Dx.\n");
else if (eax <= 0x20fff)
- printk_info("CPU Rev is K8_Ex.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_Ex.\n");
else if (eax <= 0x40fff)
- printk_info("CPU Rev is K8_Fx.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_Fx.\n");
else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */
- printk_info("CPU Rev is K8_G1.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_G1.\n");
else if (eax <= 0X60FF0)
- printk_info("CPU Rev is K8_G0.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_G0.\n");
else if (eax <= 0x100000)
- printk_info("CPU Rev is K8_G1.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_G1.\n");
else if (eax <= 0x100f00)
- printk_info("CPU Rev is Fam 10.\n");
+ printk(BIOS_INFO, "CPU Rev is Fam 10.\n");
else
- printk_info("CPU Rev is K8_10.\n");
+ printk(BIOS_INFO, "CPU Rev is K8_10.\n");
}
static u8 is_famly10()
@@ -246,7 +246,7 @@ static void rs780_htinit()
************************/
reg = pci_read_config32(cpu_f0, 0x88);
cpu_ht_freq = (reg & 0xf00) >> 8;
- printk_info("rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq);
+ printk(BIOS_INFO, "rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq);
rs780_f0 = PCI_DEV(0, 0, 0);
//set_nbcfg_enable_bits(rs780_f0, 0xC8, 0x7<<24 | 0x7<<28, 1<<24 | 1<<28);
@@ -260,7 +260,7 @@ static void rs780_htinit()
* So we check 6 only, it would be faster. */
if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) ||
(cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) {
- printk_info("rs780_htinit: HT1 mode\n");
+ printk(BIOS_INFO, "rs780_htinit: HT1 mode\n");
/* HT1 mode, RPR 8.4.2 */
/* set IBIAS code */
@@ -268,7 +268,7 @@ static void rs780_htinit()
/* Optimizes chipset HT transmitter drive strength */
set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1);
} else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) {
- printk_info("rs780_htinit: HT3 mode\n");
+ printk(BIOS_INFO, "rs780_htinit: HT3 mode\n");
#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */
/* HT3 mode, RPR 8.4.3 */
@@ -330,7 +330,7 @@ static void k8_optimization()
device_t k8_f0, k8_f2, k8_f3;
msr_t msr;
- printk_info("k8_optimization()\n");
+ printk(BIOS_INFO, "k8_optimization()\n");
k8_f0 = PCI_DEV(0, 0x18, 0);
k8_f2 = PCI_DEV(0, 0x18, 2);
k8_f3 = PCI_DEV(0, 0x18, 3);
@@ -373,7 +373,7 @@ void fam10_optimization()
msr_t msr;
u32 val;
- printk_info("fam10_optimization()\n");
+ printk(BIOS_INFO, "fam10_optimization()\n");
cpu_f0 = PCI_DEV(0, 0x18, 0);
cpu_f2 = PCI_DEV(0, 0x18, 2);
@@ -612,7 +612,7 @@ static void rs780_por_htiu_index_init(device_t nb_dev)
*****************************************/
static void rs780_por_init(device_t nb_dev)
{
- printk_info("rs780_por_init\n");
+ printk(BIOS_INFO, "rs780_por_init\n");
/* ATINB_PCICFG_POR_TABLE, initialize the values for rs780 PCI Config registers */
rs780_por_pcicfg_init(nb_dev);
@@ -642,20 +642,20 @@ static void rs780_before_pci_init()
static void rs780_early_setup()
{
device_t nb_dev = PCI_DEV(0, 0, 0);
- printk_info("rs780_early_setup()\n");
+ printk(BIOS_INFO, "rs780_early_setup()\n");
get_cpu_rev();
- /* The printk_info(s) below cause the system unstable. */
+ /* The printk(BIOS_INFO, s) below cause the system unstable. */
switch (get_nb_rev(nb_dev)) {
case REV_RS780_A11:
- /* printk_info("NB Revision is A11.\n"); */
+ /* printk(BIOS_INFO, "NB Revision is A11.\n"); */
break;
case REV_RS780_A12:
- /* printk_info("NB Revision is A12.\n"); */
+ /* printk(BIOS_INFO, "NB Revision is A12.\n"); */
break;
case REV_RS780_A13:
- /* printk_info("NB Revision is A13.\n"); */
+ /* printk(BIOS_INFO, "NB Revision is A13.\n"); */
break;
}
diff --git a/src/southbridge/amd/rs780/rs780_gfx.c b/src/southbridge/amd/rs780/rs780_gfx.c
index aa46451410..808bcb175f 100644
--- a/src/southbridge/amd/rs780/rs780_gfx.c
+++ b/src/southbridge/amd/rs780/rs780_gfx.c
@@ -55,7 +55,7 @@ static u32 clkind_read(device_t dev, u32 index)
static void clkind_write(device_t dev, u32 index, u32 data)
{
u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF;
- /* printk_info("gfx bar 2 %02x\n", gfx_bar2); */
+ /* printk(BIOS_INFO, "gfx bar 2 %02x\n", gfx_bar2); */
*(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index | 1<<7;
*(u32*)(gfx_bar2+CLK_CNTL_DATA) = data;
@@ -67,7 +67,7 @@ static void clkind_write(device_t dev, u32 index, u32 data)
*/
static void rs780_gfx_read_resources(device_t dev)
{
- printk_info("rs780_gfx_read_resources.\n");
+ printk(BIOS_INFO, "rs780_gfx_read_resources.\n");
/* The initial value of 0x24 is 0xFFFFFFFF, which is confusing.
Even if we write 0xFFFFFFFF into it, it will be 0xFFF00000,
@@ -189,7 +189,7 @@ CIM_STATUS GetCreativeMMIO(MMIORANGE *pMMIO)
{
tempdev = dev_find_slot(Bus, Dev << 3);
Value = pci_read_config32(tempdev, 0);
- printk_debug("Dev ID %x \n", Value);
+ printk(BIOS_DEBUG, "Dev ID %x \n", Value);
if((Value & 0xffff) == 0x1102)
{//Creative
//Found Creative SB
@@ -220,7 +220,7 @@ CIM_STATUS GetCreativeMMIO(MMIORANGE *pMMIO)
}
}
}
- printk_debug(" MMIOStart %x MMIOLimit %x \n", MMIOStart, MMIOLimit);
+ printk(BIOS_DEBUG, " MMIOStart %x MMIOLimit %x \n", MMIOStart, MMIOLimit);
if (MMIOStart < MMIOLimit)
{
Status = SetMMIO(MMIOStart>>8, MMIOLimit>>8, 0x80, pMMIO);
@@ -310,7 +310,7 @@ static void internal_gfx_pci_dev_init(struct device *dev)
deviceid = pci_read_config16(dev, PCI_DEVICE_ID);
vendorid = pci_read_config16(dev, PCI_VENDOR_ID);
- printk_info("internal_gfx_pci_dev_init device=%x, vendor=%x.\n",
+ printk(BIOS_INFO, "internal_gfx_pci_dev_init device=%x, vendor=%x.\n",
deviceid, vendorid);
command = pci_read_config16(dev, 0x04);
@@ -420,7 +420,7 @@ static void internal_gfx_pci_dev_init(struct device *dev)
vgainfo.ulBootUpEngineClock = 500 * 100; /* set boot up GFX engine clock. */
vgainfo.ulReserved1[0] = 0; vgainfo.ulReserved1[1] = 0;
value = pci_read_config32(k8_f2, 0x94);
- printk_debug("MEMCLK = %x\n", value&0x7);
+ printk(BIOS_DEBUG, "MEMCLK = %x\n", value&0x7);
vgainfo.ulBootUpUMAClock = 333 * 100; /* set boot up UMA memory clock. */
vgainfo.ulBootUpSidePortClock = 0; /* disable SP. */
vgainfo.ulMinSidePortClock = 0; /* disable SP. */
@@ -447,14 +447,14 @@ static void internal_gfx_pci_dev_init(struct device *dev)
vgainfo.usBootUpNBVoltage = 0x1a;
value = pci_read_config32(nb_dev, 0xd0);
- printk_debug("NB HT speed = %x.\n", value);
+ printk(BIOS_DEBUG, "NB HT speed = %x.\n", value);
value = pci_read_config32(k8_f0, 0x88);
- printk_debug("CPU HT speed = %x.\n", value);
+ printk(BIOS_DEBUG, "CPU HT speed = %x.\n", value);
vgainfo.ulHTLinkFreq = 100 * 100; /* set HT speed. */
/* HT width. */
value = pci_read_config32(nb_dev, 0xc8);
- printk_debug("HT width = %x.\n", value);
+ printk(BIOS_DEBUG, "HT width = %x.\n", value);
vgainfo.usMinHTLinkWidth = 16;
vgainfo.usMaxHTLinkWidth = 16;
vgainfo.usUMASyncStartDelay = 322;
@@ -585,10 +585,10 @@ static void rs780_internal_gfx_enable(device_t dev)
u32 FB_Start, FB_End;
#endif
- printk_info("rs780_internal_gfx_enable dev = 0x%p, nb_dev = 0x%p.\n", dev, nb_dev);
+ printk(BIOS_INFO, "rs780_internal_gfx_enable dev = 0x%p, nb_dev = 0x%p.\n", dev, nb_dev);
sysmem = rdmsr(0xc001001a);
- printk_info("sysmem = %x_%x\n", sysmem.hi, sysmem.lo);
+ printk(BIOS_INFO, "sysmem = %x_%x\n", sysmem.hi, sysmem.lo);
/* The system top memory in 780. */
pci_write_config32(nb_dev, 0x90, sysmem.lo);
@@ -826,12 +826,12 @@ static void single_port_configuration(device_t nb_dev, device_t dev)
struct southbridge_amd_rs780_config *cfg =
(struct southbridge_amd_rs780_config *)nb_dev->chip_info;
- printk_info("rs780_gfx_init single_port_configuration.\n");
+ printk(BIOS_INFO, "rs780_gfx_init single_port_configuration.\n");
/* step 12 training, releases hold training for GFX port 0 (device 2) */
PcieReleasePortTraining(nb_dev, dev, 2);
result = PcieTrainPort(nb_dev, dev, 2);
- printk_info("rs780_gfx_init single_port_configuration step12.\n");
+ printk(BIOS_INFO, "rs780_gfx_init single_port_configuration step12.\n");
/* step 13 Power Down Control */
/* step 13.1 Enables powering down transmitter and receiver pads along with PLL macros. */
@@ -851,7 +851,7 @@ static void single_port_configuration(device_t nb_dev, device_t dev)
set_pcie_enable_bits(dev, 0xA2, 0xFF, 0x1);
reg32 = nbpcie_p_read_index(dev, 0x29);
width = reg32 & 0xFF;
- printk_debug("GFX Inactive Lanes = 0x%x.\n", width);
+ printk(BIOS_DEBUG, "GFX Inactive Lanes = 0x%x.\n", width);
switch (width) {
case 1:
case 2:
@@ -868,11 +868,11 @@ static void single_port_configuration(device_t nb_dev, device_t dev)
break;
}
}
- printk_info("rs780_gfx_init single_port_configuration step13.\n");
+ printk(BIOS_INFO, "rs780_gfx_init single_port_configuration step13.\n");
/* step 14 Reset Enumeration Timer, disables the shortening of the enumeration timer */
set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19);
- printk_info("rs780_gfx_init single_port_configuration step14.\n");
+ printk(BIOS_INFO, "rs780_gfx_init single_port_configuration step14.\n");
}
static void dual_port_configuration(device_t nb_dev, device_t dev)
@@ -905,7 +905,7 @@ static void dual_port_configuration(device_t nb_dev, device_t dev)
} else { /* step 16.b Link Training was successful */
reg32 = nbpcie_p_read_index(dev, 0xa2);
width = (reg32 >> 4) & 0x7;
- printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width);
+ printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width);
switch (width) {
case 1:
case 2:
@@ -983,7 +983,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
struct southbridge_amd_rs780_config *cfg =
(struct southbridge_amd_rs780_config *)nb_dev->chip_info;
- printk_info("rs780_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n",
+ printk(BIOS_INFO, "rs780_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n",
nb_dev, dev, port);
/* GFX Core Initialization */
@@ -995,13 +995,13 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
if (cfg->gfx_dual_slot)
set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3);
}
- printk_info("rs780_gfx_init step1.\n");
+ printk(BIOS_INFO, "rs780_gfx_init step1.\n");
/* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */
/* AMD calls the configuration CrossFire */
if (cfg->gfx_dual_slot)
set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8);
- printk_info("rs780_gfx_init step2.\n");
+ printk(BIOS_INFO, "rs780_gfx_init step2.\n");
/* step 2, TMDS, (only need if CMOS option is enabled) */
if (cfg->gfx_tmds) {
@@ -1020,7 +1020,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
set_nbmisc_enable_bits(nb_dev, 0x28, 3 << 6 | 3 << 8 | 3 << 10,
1 << 6 | 1 << 8 | 1 << 10);
reg32 = nbmisc_read_index(nb_dev, 0x28);
- printk_info("misc 28 = %x\n", reg32);
+ printk(BIOS_INFO, "misc 28 = %x\n", reg32);
/* 5.9.1.6.Selects the single ended GFX REFCLK to be the source for core logic. */
set_nbmisc_enable_bits(nb_dev, 0x6C, 1 << 31, 1 << 31);
@@ -1038,7 +1038,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
set_nbmisc_enable_bits(nb_dev, 0x28, 3 << 6 | 3 << 8 | 3 << 10,
0);
reg32 = nbmisc_read_index(nb_dev, 0x28);
- printk_info("misc 28 = %x\n", reg32);
+ printk(BIOS_INFO, "misc 28 = %x\n", reg32);
/* 5.9.1.6.Selects the single ended GFX REFCLK to be the source for core logic. */
set_nbmisc_enable_bits(nb_dev, 0x6C, 1 << 31, 0 << 31);
@@ -1079,7 +1079,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
/* release hold training for device 2. GFX initialization is done. */
set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4);
dynamic_link_width_control(nb_dev, dev, cfg->gfx_link_width);
- printk_info("rs780_gfx_init step7.\n");
+ printk(BIOS_INFO, "rs780_gfx_init step7.\n");
return;
}
@@ -1087,11 +1087,11 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
/* 5.9.12.1 sets RCB timeout to be 25ms */
/* 5.9.12.2. RCB Cpl timeout on link down. */
set_pcie_enable_bits(dev, 0x70, 7 << 16 | 1 << 19, 4 << 16 | 1 << 19);
- printk_info("rs780_gfx_init step5.9.12.1.\n");
+ printk(BIOS_INFO, "rs780_gfx_init step5.9.12.1.\n");
/* step 5.9.12.3 disables slave ordering logic */
set_pcie_enable_bits(nb_dev, 0x20, 1 << 8, 1 << 8);
- printk_info("rs780_gfx_init step5.9.12.3.\n");
+ printk(BIOS_INFO, "rs780_gfx_init step5.9.12.3.\n");
/* step 5.9.12.4 sets DMA payload size to 64 bytes */
set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10);
@@ -1113,7 +1113,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
/* 5.9.12.9 CMGOOD_OVERRIDE for end point initiated lane degradation. */
set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 17, 1 << 17);
- printk_info("rs780_gfx_init step5.9.12.9.\n");
+ printk(BIOS_INFO, "rs780_gfx_init step5.9.12.9.\n");
/* 5.9.12.10 Sets the timer in Config state from 20us to */
/* 5.9.12.11 De-asserts RX_EN in L0s. */
@@ -1188,7 +1188,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
dual_port_configuration(nb_dev, dev);
break;
default:
- printk_info("Incorrect configuration of external gfx slot.\n");
+ printk(BIOS_INFO, "Incorrect configuration of external gfx slot.\n");
break;
}
}
diff --git a/src/southbridge/amd/rs780/rs780_ht.c b/src/southbridge/amd/rs780/rs780_ht.c
index b3fa05a529..03d4f84645 100644
--- a/src/southbridge/amd/rs780/rs780_ht.c
+++ b/src/southbridge/amd/rs780/rs780_ht.c
@@ -53,7 +53,7 @@ static void pcie_init(struct device *dev)
/* Enable pci error detecting */
u32 dword;
- printk_info("pcie_init in rs780_ht.c\n");
+ printk(BIOS_INFO, "pcie_init in rs780_ht.c\n");
/* System error enable */
dword = pci_read_config32(dev, 0x04);
diff --git a/src/southbridge/amd/rs780/rs780_pcie.c b/src/southbridge/amd/rs780/rs780_pcie.c
index b778af3aa6..186266b8f1 100644
--- a/src/southbridge/amd/rs780/rs780_pcie.c
+++ b/src/southbridge/amd/rs780/rs780_pcie.c
@@ -106,7 +106,7 @@ static void pcie_init(struct device *dev)
/* Enable pci error detecting */
u32 dword;
- printk_debug("pcie_init in rs780_pcie.c\n");
+ printk(BIOS_DEBUG, "pcie_init in rs780_pcie.c\n");
/* System error enable */
dword = pci_read_config32(dev, 0x04);
@@ -216,7 +216,7 @@ static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev)
*****************************************************************/
void enable_pcie_bar3(device_t nb_dev)
{
- printk_debug("enable_pcie_bar3()\n");
+ printk(BIOS_DEBUG, "enable_pcie_bar3()\n");
set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */
set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16);
@@ -232,7 +232,7 @@ void enable_pcie_bar3(device_t nb_dev)
*****************************************************************/
void disable_pcie_bar3(device_t nb_dev)
{
- printk_debug("disable_pcie_bar3()\n");
+ printk(BIOS_DEBUG, "disable_pcie_bar3()\n");
pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */
set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */
ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
@@ -255,7 +255,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
u32 gfx_gpp_sb_sel;
struct southbridge_amd_rs780_config *cfg =
(struct southbridge_amd_rs780_config *)nb_dev->chip_info;
- printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%p\n", nb_dev, dev, port);
+ printk(BIOS_DEBUG, "gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%p\n", nb_dev, dev, port);
gfx_gpp_sb_sel = port >= 4 && port <= 8 ?
PCIE_CORE_INDEX_GPPSB : /* 4,5,6,7,8 */
@@ -369,7 +369,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
PcieReleasePortTraining(nb_dev, dev, port);
if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) {
u8 res = PcieTrainPort(nb_dev, dev, port);
- printk_debug("PcieTrainPort port=0x%x result=%d\n", port, res);
+ printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res);
if (res) {
AtiPcieCfg.PortDetect |= 1 << port;
}