first round name simplification. drop the <component>_ prefix.

the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.

Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)

- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong

Signed-off-by: <stepan@coresystems.de>

Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 294 insertions, 0 deletions

diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
new file mode 100644
index 0000000000..08b9aa8ad9
--- /dev/null
+++ b/src/southbridge/amd/sb700/sata.c
@@ -0,0 +1,294 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <delay.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "sb700.h"
+
+static int sata_drive_detect(int portnum, u16 iobar)
+{
+	u8 byte, byte2;
+	int i = 0;
+	outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6);
+	while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7),
+		(byte != (0xA0 + 0x10 * (portnum % 2))) ||
+		((byte2 & 0x88) != 0)) {
+		printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2);
+		if (byte != (0xA0 + 0x10 * (portnum % 2))) {
+			/* This will happen at the first iteration of this loop
+			 * if the first SATA port is unpopulated and the
+			 * second SATA port is poulated.
+			 */
+			printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
+				"retrying init\n", i * 10);
+			return 1;
+		} else
+			printk(BIOS_SPEW, "drive detection not yet completed, "
+				"waiting...\n");
+		mdelay(10);
+		i++;
+	}
+	printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10);
+	return 0;
+}
+
+	/* This function can be overloaded in mainboard.c */
+
+void __attribute__((weak)) sb700_setup_sata_phys(struct device *dev) {
+	/* RPR7.6.1 Program the PHY Global Control to 0x2C00 */
+	pci_write_config16(dev, 0x86, 0x2c00);
+
+	/* RPR7.6.2 SATA GENI PHY ports setting */
+	pci_write_config32(dev, 0x88, 0x01B48017);
+	pci_write_config32(dev, 0x8c, 0x01B48019);
+	pci_write_config32(dev, 0x90, 0x01B48016);
+	pci_write_config32(dev, 0x94, 0x01B48016);
+	pci_write_config32(dev, 0x98, 0x01B48016);
+	pci_write_config32(dev, 0x9C, 0x01B48016);
+
+	/* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */
+	pci_write_config16(dev, 0xA0, 0xA09A);
+	pci_write_config16(dev, 0xA2, 0xA09F);
+	pci_write_config16(dev, 0xA4, 0xA07A);
+	pci_write_config16(dev, 0xA6, 0xA07A);
+	pci_write_config16(dev, 0xA8, 0xA07A);
+	pci_write_config16(dev, 0xAA, 0xA07A);
+}
+
+static void sata_init(struct device *dev)
+{
+	u8 byte;
+	u16 word;
+	u32 dword;
+	u8 rev_id;
+	u32 sata_bar5;
+	u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
+	int i, j;
+
+	struct southbridge_ati_sb700_config *conf;
+	conf = dev->chip_info;
+
+	device_t sm_dev;
+	/* SATA SMBus Disable */
+	/* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+	/* Disable SATA SMBUS */
+	byte = pci_read_config8(sm_dev, 0xad);
+	byte |= (1 << 1);
+	/* Enable SATA and power saving */
+	byte = pci_read_config8(sm_dev, 0xad);
+	byte |= (1 << 0);
+	byte |= (1 << 5);
+	pci_write_config8(sm_dev, 0xad, byte);
+
+	/* RPR 7.2 SATA Initialization */
+	/* Set the interrupt Mapping to INTG# */
+	byte = pci_read_config8(sm_dev, 0xaf);
+	byte = 0x6 << 2;
+	pci_write_config8(sm_dev, 0xaf, byte);
+
+	/* get rev_id */
+	rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
+
+	/* get base address */
+	sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
+	sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
+	sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
+	sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
+	sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3;
+	sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;
+
+	printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0);	/* 3030 */
+	printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1);	/* 3070 */
+	printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2);	/* 3040 */
+	printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3);	/* 3080 */
+	printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4);	/* 3000 */
+	printk(BIOS_SPEW, "sata_bar5=%x\n", sata_bar5);	/* e0309000 */
+
+	/* disable combined mode */
+	byte = pci_read_config8(sm_dev, 0xAD);
+	byte &= ~(1 << 3);
+	pci_write_config8(sm_dev, 0xAD, byte);
+	/* Program the 2C to 0x43801002 */
+	dword = 0x43801002;
+	pci_write_config32(dev, 0x2c, dword);
+
+	/* SERR-Enable */
+	word = pci_read_config16(dev, 0x04);
+	word |= (1 << 8);
+	pci_write_config16(dev, 0x04, word);
+
+	/* Dynamic power saving */
+	byte = pci_read_config8(dev, 0x40);
+	byte |= (1 << 2);
+	pci_write_config8(dev, 0x40, byte);
+
+	/* Set SATA Operation Mode, Set to IDE mode */
+	byte = pci_read_config8(dev, 0x40);
+	byte |= (1 << 0);
+	byte |= (1 << 4);
+	pci_write_config8(dev, 0x40, byte);
+
+	dword = 0x01018f00;
+	pci_write_config32(dev, 0x8, dword);
+
+	byte = pci_read_config8(dev, 0x40);
+	byte &= ~(1 << 0);
+	pci_write_config8(dev, 0x40, byte);
+
+	/* Enable the SATA watchdog counter */
+	byte = pci_read_config8(dev, 0x44);
+	byte |= (1 << 0);
+	pci_write_config8(dev, 0x44, byte);
+
+	/* Set bit 29 and 24 for A12 */
+	dword = pci_read_config32(dev, 0x40);
+	if (rev_id < 0x14)	/* before A12 */
+		dword |= (1 << 29);
+	else
+		dword &= ~(1 << 29); /* A14 and above */
+	pci_write_config32(dev, 0x40, dword);
+
+	/* set bit 21 for A12 */
+	dword = pci_read_config32(dev, 0x48);
+	if (rev_id < 0x14)	/* before A12 */
+		dword |= 1 << 24 | 1 << 21;
+	else {
+		dword &= ~(1 << 24 | 1 << 21); /* A14 and above */
+		dword &= ~0xFF80; /* 15:7 */
+		dword |= 1 << 15 | 0x7F << 7;
+	}
+	pci_write_config32(dev, 0x48, dword);
+
+	/* Program the watchdog counter to 0x10 */
+	byte = 0x10;
+	pci_write_config8(dev, 0x46, byte);
+	sb700_setup_sata_phys(dev);
+	/* Enable the I/O, MM, BusMaster access for SATA */
+	byte = pci_read_config8(dev, 0x4);
+	byte |= 7 << 0;
+	pci_write_config8(dev, 0x4, byte);
+
+	/* RPR7.7 SATA drive detection. */
+	/* Use BAR5+0x128,BAR0 for Primary Slave */
+	/* Use BAR5+0x1A8,BAR0 for Primary Slave */
+	/* Use BAR5+0x228,BAR2 for Secondary Master */
+	/* Use BAR5+0x2A8,BAR2 for Secondary Slave */
+	/* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */
+	/* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
+
+	/* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */
+
+	for (i = 0; i < 4; i++) {
+		byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+		printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
+		byte &= 0xF;
+		if( byte == 0x1 ) {
+			/* If the drive status is 0x1 then we see it but we aren't talking to it. */
+			/* Try to do something about it. */
+			printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
+
+			/* Read in Port-N Serial ATA Control Register */
+			byte = read8(sata_bar5 + 0x12C + 0x80 * i);
+
+			/* Set Reset Bit and 1.5g bit */
+			byte |= 0x11;
+			write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+			/* Wait 1ms */
+			mdelay(1);
+
+			/* Clear Reset Bit */
+			byte &= ~0x01;
+			write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+			/* Wait 1ms */
+			mdelay(1);
+
+			/* Reread status */
+			byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+			printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
+			byte &= 0xF;
+		}
+
+		if (byte == 0x3) {
+			for (j = 0; j < 10; j++) {
+				if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2))
+					break;
+			}
+			printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n",
+					(i / 2) ? "Secondary" : "Primary",
+					(i % 2 ) ? "Slave" : "Master",
+					(j == 10) ? "not " : "",
+					(j == 10) ? j : j + 1);
+		} else {
+			printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n",
+					(i / 2) ? "Secondary" : "Primary",
+					(i % 2 ) ? "Slave" : "Master", i);
+		}
+	}
+
+	/* Below is CIM InitSataLateFar */
+	/* Enable interrupts from the HBA  */
+	byte = read8(sata_bar5 + 0x4);
+	byte |= 1 << 1;
+	write8((sata_bar5 + 0x4), byte);
+
+	/* Clear error status */
+	write32((sata_bar5 + 0x130), 0xFFFFFFFF);
+	write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
+	write32((sata_bar5 + 0x230), 0xFFFFFFFF);
+	write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
+	write32((sata_bar5 + 0x330), 0xFFFFFFFF);
+	write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
+
+	/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
+	/* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
+
+	/* word = 0x0000; */
+	/* word = pm_ioread(0x28); */
+	/* byte = pm_ioread(0x29); */
+	/* word |= byte<<8; */
+	/* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */
+	/* write32(word, 0x80000000); */
+}
+
+static struct pci_operations lops_pci = {
+	/* .set_subsystem = pci_dev_set_subsystem, */
+};
+
+static struct device_operations sata_ops = {
+	.read_resources = pci_dev_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init = sata_init,
+	.scan_bus = 0,
+	.ops_pci = &lops_pci,
+};
+
+static const struct pci_driver sata0_driver __pci_driver = {
+	.ops = &sata_ops,
+	.vendor = PCI_VENDOR_ID_ATI,
+	.device = PCI_DEVICE_ID_ATI_SB700_SATA,
+};