summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb700
diff options
context:
space:
mode:
authorKevin Paul Herbert <kph@meraki.net>2014-12-24 18:43:20 -0800
committerAlexandru Gagniuc <mr.nuke.me@gmail.com>2015-02-15 08:50:22 +0100
commitbde6d309dfafe58732ec46314a2d4c08974b62d4 (patch)
tree17ba00565487ddfbb5759c96adfbb3fffe2a4550 /src/southbridge/amd/sb700
parent4b10dec1a66122b515b2191f823d7fd379ec655f (diff)
downloadcoreboot-bde6d309dfafe58732ec46314a2d4c08974b62d4.tar.xz
x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
Diffstat (limited to 'src/southbridge/amd/sb700')
-rw-r--r--src/southbridge/amd/sb700/enable_usbdebug.c2
-rw-r--r--src/southbridge/amd/sb700/hda.c18
-rw-r--r--src/southbridge/amd/sb700/sata.c6
-rw-r--r--src/southbridge/amd/sb700/sm.c4
-rw-r--r--src/southbridge/amd/sb700/usb.c6
5 files changed, 18 insertions, 18 deletions
diff --git a/src/southbridge/amd/sb700/enable_usbdebug.c b/src/southbridge/amd/sb700/enable_usbdebug.c
index 3d23da0618..856d5bf1e5 100644
--- a/src/southbridge/amd/sb700/enable_usbdebug.c
+++ b/src/southbridge/amd/sb700/enable_usbdebug.c
@@ -39,7 +39,7 @@ pci_devfn_t pci_ehci_dbg_dev(unsigned int hcd_idx)
void pci_ehci_dbg_set_port(pci_devfn_t dev, unsigned int port)
{
- u32 base_regs = pci_ehci_base_regs(dev);
+ u8 *base_regs = pci_ehci_base_regs(dev);
u32 reg32;
/* Write the port number to DEBUGPORT_MISC_CONTROL[31:28]. */
diff --git a/src/southbridge/amd/sb700/hda.c b/src/southbridge/amd/sb700/hda.c
index 308b08cc32..f29ee3d612 100644
--- a/src/southbridge/amd/sb700/hda.c
+++ b/src/southbridge/amd/sb700/hda.c
@@ -30,7 +30,7 @@
#define HDA_ICII_BUSY (1 << 0)
#define HDA_ICII_VALID (1 << 1)
-static int set_bits(u32 port, u32 mask, u32 val)
+static int set_bits(void *port, u32 mask, u32 val)
{
u32 dword;
int count;
@@ -59,7 +59,7 @@ static int set_bits(u32 port, u32 mask, u32 val)
return 0;
}
-static u32 codec_detect(u32 base)
+static u32 codec_detect(void *base)
{
u32 dword;
@@ -94,7 +94,7 @@ no_codec:
* Wait 50usec for the codec to indicate it is ready
* no response would imply that the codec is non-operative
*/
-static int wait_for_ready(u32 base)
+static int wait_for_ready(void *base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
@@ -116,7 +116,7 @@ static int wait_for_ready(u32 base)
* the previous command. No response would imply that the code
* is non-operative
*/
-static int wait_for_valid(u32 base)
+static int wait_for_valid(void *base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
@@ -133,7 +133,7 @@ static int wait_for_valid(u32 base)
return -1;
}
-static void codec_init(u32 base, int addr)
+static void codec_init(void *base, int addr)
{
u32 dword;
@@ -153,7 +153,7 @@ static void codec_init(u32 base, int addr)
printk(BIOS_DEBUG, "%x(th) codec viddid: %08x\n", addr, dword);
}
-static void codecs_init(u32 base, u32 codec_mask)
+static void codecs_init(void *base, u32 codec_mask)
{
int i;
for (i = 2; i >= 0; i--) {
@@ -166,7 +166,7 @@ static void hda_init(struct device *dev)
{
u8 byte;
u32 dword;
- u32 base;
+ void *base;
struct resource *res;
u32 codec_mask;
device_t sm_dev;
@@ -202,8 +202,8 @@ static void hda_init(struct device *dev)
if (!res)
return;
- base = (u32)res->base;
- printk(BIOS_DEBUG, "base = 0x%x\n", base);
+ base = res2mmio(res, 0, 0);
+ printk(BIOS_DEBUG, "base = 0x%p\n", base);
codec_mask = codec_detect(base);
if (codec_mask) {
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
index 7fa924b8a3..9df6d481a9 100644
--- a/src/southbridge/amd/sb700/sata.c
+++ b/src/southbridge/amd/sb700/sata.c
@@ -82,7 +82,7 @@ static void sata_init(struct device *dev)
u16 word;
u32 dword;
u8 rev_id;
- u32 sata_bar5;
+ void *sata_bar5;
u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
int i, j;
@@ -108,7 +108,7 @@ static void sata_init(struct device *dev)
rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
/* get base address */
- sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
+ sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF);
sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
@@ -120,7 +120,7 @@ static void sata_init(struct device *dev)
printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */
printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */
printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */
- printk(BIOS_SPEW, "sata_bar5=%x\n", sata_bar5); /* e0309000 */
+ printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */
/* disable combined mode */
byte = pci_read_config8(sm_dev, 0xAD);
diff --git a/src/southbridge/amd/sb700/sm.c b/src/southbridge/amd/sb700/sm.c
index 5aa4eb102d..1db637be37 100644
--- a/src/southbridge/amd/sb700/sm.c
+++ b/src/southbridge/amd/sb700/sm.c
@@ -50,14 +50,14 @@ static void sm_init(device_t dev)
u8 byte_old;
u8 rev;
u32 dword;
- u32 ioapic_base;
+ void *ioapic_base;
u32 on;
u32 nmi_option;
printk(BIOS_INFO, "sm_init().\n");
rev = get_sb700_revision(dev);
- ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */
+ ioapic_base = (void *)(pci_read_config32(dev, 0x74) & (0xffffffe0)); /* some like mem resource, but does not have enable bit */
/* Don't rename APIC ID */
/* TODO: We should call setup_ioapic() here. But kernel hangs if cpu is K8.
* We need to check out why and change back. */
diff --git a/src/southbridge/amd/sb700/usb.c b/src/southbridge/amd/sb700/usb.c
index 77dcf2e2f6..dd8b390aed 100644
--- a/src/southbridge/amd/sb700/usb.c
+++ b/src/southbridge/amd/sb700/usb.c
@@ -81,7 +81,7 @@ static void usb_init(struct device *dev)
static void usb_init2(struct device *dev)
{
u32 dword;
- u32 usb2_bar0;
+ void *usb2_bar0;
device_t sm_dev;
u8 rev;
@@ -92,8 +92,8 @@ static void usb_init2(struct device *dev)
/* dword |= 40; */
/* pci_write_config32(dev, 0xf8, dword); */
- usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
- printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);
+ usb2_bar0 = (void *)(pci_read_config32(dev, 0x10) & ~0xFF);
+ printk(BIOS_INFO, "usb2_bar0=0x%p\n", usb2_bar0);
/* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */
dword = 0x00020F00;