summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb800
diff options
context:
space:
mode:
authorZheng Bao <zheng.bao@amd.com>2011-01-20 04:45:48 +0000
committerZheng Bao <Zheng.Bao@amd.com>2011-01-20 04:45:48 +0000
commitd098575b0e8440da33eceaf715967ea8273bbaf2 (patch)
tree10bb69008c6f512fa1bf9ac0563679ca63510471 /src/southbridge/amd/sb800
parentdd676ddc54f8d210f9c62a0f6a259dd4482c9b1b (diff)
downloadcoreboot-d098575b0e8440da33eceaf715967ea8273bbaf2.tar.xz
This sb800 code is derived from sb700.
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd/sb800')
-rw-r--r--src/southbridge/amd/sb800/Kconfig42
-rw-r--r--src/southbridge/amd/sb800/Makefile.inc12
-rw-r--r--src/southbridge/amd/sb800/bootblock.c69
-rw-r--r--src/southbridge/amd/sb800/chip.h34
-rw-r--r--src/southbridge/amd/sb800/early_setup.c654
-rw-r--r--src/southbridge/amd/sb800/enable_usbdebug.c52
-rw-r--r--src/southbridge/amd/sb800/fadt.c160
-rw-r--r--src/southbridge/amd/sb800/hda.c213
-rw-r--r--src/southbridge/amd/sb800/ide.c83
-rw-r--r--src/southbridge/amd/sb800/lpc.c243
-rw-r--r--src/southbridge/amd/sb800/pci.c76
-rw-r--r--src/southbridge/amd/sb800/pcie.c75
-rw-r--r--src/southbridge/amd/sb800/reset.c33
-rw-r--r--src/southbridge/amd/sb800/sata.c258
-rw-r--r--src/southbridge/amd/sb800/sb800.c393
-rw-r--r--src/southbridge/amd/sb800/sb800.h60
-rw-r--r--src/southbridge/amd/sb800/sm.c357
-rw-r--r--src/southbridge/amd/sb800/smbus.c253
-rw-r--r--src/southbridge/amd/sb800/smbus.h76
-rw-r--r--src/southbridge/amd/sb800/usb.c234
20 files changed, 3377 insertions, 0 deletions
diff --git a/src/southbridge/amd/sb800/Kconfig b/src/southbridge/amd/sb800/Kconfig
new file mode 100644
index 0000000000..1afd242d35
--- /dev/null
+++ b/src/southbridge/amd/sb800/Kconfig
@@ -0,0 +1,42 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config SOUTHBRIDGE_AMD_SB800
+ bool
+ select IOAPIC
+ select HAVE_USBDEBUG
+ select TINY_BOOTBLOCK
+
+config BOOTBLOCK_SOUTHBRIDGE_INIT
+ string
+ default "southbridge/amd/sb800/bootblock.c"
+ depends on SOUTHBRIDGE_AMD_SB800
+
+config SOUTHBRIDGE_AMD_SB800_SKIP_ISA_DMA_INIT
+ bool
+ default n
+ depends on SOUTHBRIDGE_AMD_SB800
+
+config EHCI_BAR
+ hex
+ default 0xfef00000 if SOUTHBRIDGE_AMD_SB800
+
+config EHCI_DEBUG_OFFSET
+ hex
+ default 0xe0 if SOUTHBRIDGE_AMD_SB800
diff --git a/src/southbridge/amd/sb800/Makefile.inc b/src/southbridge/amd/sb800/Makefile.inc
new file mode 100644
index 0000000000..7a42fdd4d8
--- /dev/null
+++ b/src/southbridge/amd/sb800/Makefile.inc
@@ -0,0 +1,12 @@
+driver-y += sb800.c
+driver-y += usb.c
+driver-y += lpc.c
+driver-y += sm.c
+driver-y += ide.c
+driver-y += sata.c
+driver-y += hda.c
+driver-y += pci.c
+driver-y += pcie.c
+ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c
+ramstage-y += reset.c
+romstage-y += enable_usbdebug.c
diff --git a/src/southbridge/amd/sb800/bootblock.c b/src/southbridge/amd/sb800/bootblock.c
new file mode 100644
index 0000000000..7a67a946d8
--- /dev/null
+++ b/src/southbridge/amd/sb800/bootblock.c
@@ -0,0 +1,69 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+
+/*
+ * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
+ *
+ * Hardware should enable LPC ROM by pin straps. This function does not
+ * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
+ *
+ * The SB800 power-on default is to map 512K ROM space.
+ *
+ */
+static void sb800_enable_rom(void)
+{
+ u8 reg8;
+ device_t dev;
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SB800_LPC), 0);
+
+ /* Decode variable LPC ROM address ranges 1 and 2. */
+ reg8 = pci_read_config8(dev, 0x48);
+ reg8 |= (1 << 3) | (1 << 4);
+ pci_write_config8(dev, 0x48, reg8);
+
+ /* LPC ROM address range 1: */
+ /* Enable LPC ROM range mirroring start at 0x000e(0000). */
+ pci_write_config16(dev, 0x68, 0x000e);
+ /* Enable LPC ROM range mirroring end at 0x000f(ffff). */
+ pci_write_config16(dev, 0x6a, 0x000f);
+
+ /* LPC ROM address range 2: */
+ /*
+ * Enable LPC ROM range start at:
+ * 0xfff8(0000): 512KB
+ * 0xfff0(0000): 1MB
+ * 0xffe0(0000): 2MB
+ * 0xffc0(0000): 4MB
+ */
+ pci_write_config16(dev, 0x6c, 0xffc0); /* 4 MB */
+ /* Enable LPC ROM range end at 0xffff(ffff). */
+ pci_write_config16(dev, 0x6e, 0xffff);
+}
+
+static void bootblock_southbridge_init(void)
+{
+ sb800_enable_rom();
+}
diff --git a/src/southbridge/amd/sb800/chip.h b/src/southbridge/amd/sb800/chip.h
new file mode 100644
index 0000000000..41f26d16c0
--- /dev/null
+++ b/src/southbridge/amd/sb800/chip.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB800_CHIP_H
+#define SB800_CHIP_H
+
+struct southbridge_amd_sb800_config
+{
+ u32 ide0_enable : 1;
+ u32 sata0_enable : 1;
+ u32 boot_switch_sata_ide : 1;
+ u32 hda_viddid;
+ u8 gpp_configuration;
+};
+struct chip_operations;
+extern struct chip_operations southbridge_amd_sb800_ops;
+
+#endif /* SB800_CHIP_H */
diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c
new file mode 100644
index 0000000000..61a0e66588
--- /dev/null
+++ b/src/southbridge/amd/sb800/early_setup.c
@@ -0,0 +1,654 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _SB800_EARLY_SETUP_C_
+#define _SB800_EARLY_SETUP_C_
+
+#include <reset.h>
+#include <arch/cpu.h>
+#include <cbmem.h>
+#include "sb800.h"
+#include "smbus.c"
+
+#define SMBUS_IO_BASE 0x6000 /* Is it a temporary SMBus I/O base address? */
+ /*SIZE 0x40 */
+
+static void pmio_write(u8 reg, u8 value)
+{
+ outb(reg, PM_INDEX);
+ outb(value, PM_INDEX + 1);
+}
+
+static u8 pmio_read(u8 reg)
+{
+ outb(reg, PM_INDEX);
+ return inb(PM_INDEX + 1);
+}
+
+static void sb800_acpi_init(void) {
+ pmio_write(0x60, ACPI_PM_EVT_BLK & 0xFF);
+ pmio_write(0x61, ACPI_PM_EVT_BLK >> 8);
+ pmio_write(0x62, ACPI_PM1_CNT_BLK & 0xFF);
+ pmio_write(0x63, ACPI_PM1_CNT_BLK >> 8);
+ pmio_write(0x64, ACPI_PM_TMR_BLK & 0xFF);
+ pmio_write(0x65, ACPI_PM_TMR_BLK >> 8);
+ pmio_write(0x68, ACPI_GPE0_BLK & 0xFF);
+ pmio_write(0x69, ACPI_GPE0_BLK >> 8);
+
+ /* CpuControl is in \_PR.CPU0, 6 bytes */
+ pmio_write(0x66, ACPI_CPU_CONTROL & 0xFF);
+ pmio_write(0x67, ACPI_CPU_CONTROL >> 8);
+
+ pmio_write(0x6A, 0); /* AcpiSmiCmdLo */
+ pmio_write(0x6B, 0); /* AcpiSmiCmdHi */
+
+ pmio_write(0x6C, ACPI_PMA_CNT_BLK & 0xFF);
+ pmio_write(0x6D, ACPI_PMA_CNT_BLK >> 8);
+
+ pm_iowrite(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2); /* AcpiDecodeEnable, When set, SB uses
+ * the contents of the PM registers at
+ * index 60-6B to decode ACPI I/O address.
+ * AcpiSmiEn & SmiCmdEn*/
+}
+
+/* RPR 2.28 Get SB ASIC Revision.*/
+static u8 get_sb800_revision(void)
+{
+ device_t dev;
+ u8 rev_id;
+ u8 rev = 0;
+
+ /* if (rev != 0) return rev; */
+
+ dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\n");
+ /* NOT REACHED */
+ }
+ rev_id = pci_read_config8(dev, 0x08);
+
+ if (rev_id == 0x40) {
+ rev = REV_SB800_A11;
+ } else if (rev_id == 0x41) {
+ rev = REV_SB800_A12;
+ } else {
+ die("It is not SB800 or SB810\r\n");
+ }
+
+ return rev;
+}
+
+#if 0
+static void sb800_clk_output_48Mhz(void)
+{
+ /* AcpiMMioDecodeEn */
+ u8 reg8;
+ reg8 = pmio_read(0x24);
+ reg8 |= 1;
+ reg8 &= ~(1 << 1);
+ pmio_write(0x24, reg8);
+
+ *(volatile u32 *)(0xFED80000+0xE00+0x40) &= ~((1 << 0) | (1 << 2)); /* 48Mhz */
+ *(volatile u32 *)(0xFED80000+0xE00+0x40) |= 1 << 1; /* 48Mhz */
+}
+#endif
+/***************************************
+* Legacy devices are mapped to LPC space.
+* Serial port 0
+* KBC Port
+* ACPI Micro-controller port
+* LPC ROM size
+* This function does not change port 0x80 decoding.
+* Console output through any port besides 0x3f8 is unsupported.
+* If you use FWH ROMs, you have to setup IDSEL.
+***************************************/
+static void sb800_lpc_init(void)
+{
+ u8 reg8;
+ device_t dev;
+
+ //dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */
+ dev = PCI_DEV(0, 0x14, 0);
+ /* NOTE: Set BootTimerDisable, otherwise it would keep rebooting!!
+ * This bit has no meaning if debug strap is not enabled. So if the
+ * board keeps rebooting and the code fails to reach here, we could
+ * disable the debug strap first. */
+ reg8 = pmio_read(0x44+3);
+ reg8 |= 1 << 7;
+ pmio_write(0x44+3, reg8);
+
+ /* Enable lpc controller */
+ reg8 = pmio_read(0xEC);
+ reg8 |= 1 << 0;
+ pmio_write(0xEC, reg8);
+
+ dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439d), 0); /* LPC Controller */
+ /* Decode port 0x3f8-0x3ff (Serial 0) */
+ //#warning Serial port decode on LPC is hardcoded to 0x3f8
+ reg8 = pci_read_config8(dev, 0x44);
+ reg8 |= 1 << 6;
+ pci_write_config8(dev, 0x44, reg8);
+
+ /* Decode port 0x60 & 0x64 (PS/2 keyboard) and port 0x62 & 0x66 (ACPI)*/
+ reg8 = pci_read_config8(dev, 0x47);
+ reg8 |= (1 << 5) | (1 << 6);
+ pci_write_config8(dev, 0x47, reg8);
+
+ /* SuperIO, LPC ROM */
+ reg8 = pci_read_config8(dev, 0x48);
+ /* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */
+ reg8 |= (1 << 1) | (1 << 0);
+ /* Decode variable LPC ROM address ranges 1&2 (see register 0x68-0x6b, 0x6c-0x6f) */
+ reg8 |= (1 << 3) | (1 << 4);
+ /* Decode port 0x70-0x73 (RTC) */
+ reg8 |= 1 << 6;
+ pci_write_config8(dev, 0x48, reg8);
+}
+
+/* what is its usage? */
+static u32 get_sbdn(u32 bus)
+{
+ device_t dev;
+
+ /* Find the device. */
+ dev = PCI_DEV(bus, 0x14, 0);//pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus);
+ return (dev >> 15) & 0x1f;
+}
+
+static u8 dual_core(void)
+{
+ return (pci_read_config32(PCI_DEV(0, 0x18, 3), 0xE8) & (0x3<<12)) != 0;
+}
+
+/*
+ * RPR 2.6 C-state and VID/FID change for the K8 platform.
+ */
+static void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn)
+{
+ u8 byte;
+ byte = pmio_read(0x80);
+ if (dual_core())
+ byte |= 1 << 2 | 1 << 1;
+ byte |= 1 << 3;
+ byte |= 1 << 4;
+ byte &= ~(1 << 7);
+ pmio_write(0x80, byte);
+
+ byte = pmio_read(0x7E);
+ byte |= 1 << 6;
+ byte &= ~(1 << 2);
+ pmio_write(0x7E, byte);
+
+ pmio_write(0x94, 0x01);
+
+ byte = pmio_read(0x89);
+ byte |= 1 << 4;
+ pmio_write(0x89, byte);
+
+ byte = pmio_read(0x9b);
+ byte &= ~(7 << 4);
+ byte |= 1 << 4;
+ pmio_write(0x9b, byte);
+
+ pmio_write(0x99, 0x10);
+
+ pmio_write(0x9A, 0x00);
+ pmio_write(0x96, 0x10);
+ pmio_write(0x97, 0x00);
+
+ byte = pmio_read(0x81);
+ byte &= ~(1 << 1);
+ pmio_write(0x81, byte);
+}
+
+void hard_reset(void)
+{
+ set_bios_reset();
+
+ /* full reset */
+ outb(0x0a, 0x0cf9);
+ outb(0x0e, 0x0cf9);
+}
+
+void soft_reset(void)
+{
+ set_bios_reset();
+ /* link reset */
+ outb(0x06, 0x0cf9);
+}
+
+#if 0
+static void sb800_pci_port80(void)
+{
+ u8 byte;
+ device_t dev;
+
+ /* P2P Bridge */
+ dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0);
+
+ /* Chip Control: Enable subtractive decoding */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 5;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 7;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* The same IO Base and IO Limit here is meaningful because we set the
+ * bridge to be subtractive. During early setup stage, we have to make
+ * sure that data can go through port 0x80.
+ */
+ /* IO Base: 0xf000 */
+ byte = pci_read_config8(dev, 0x1C);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1C, byte);
+
+ /* IO Limit: 0xf000 */
+ byte = pci_read_config8(dev, 0x1D);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1D, byte);
+
+ /* PCI Command: Enable IO response */
+ byte = pci_read_config8(dev, 0x04);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x04, byte);
+
+ /* LPC controller */
+ dev = PCI_DEV(0, 0x14, 3);;//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+
+ byte = pci_read_config8(dev, 0x4A);
+ byte &= ~(1 << 5); /* disable lpc port 80 */
+ pci_write_config8(dev, 0x4A, byte);
+}
+#endif
+#define BIT0 (1 << 0)
+#define BIT1 (1 << 1)
+#define BIT2 (1 << 2)
+#define BIT3 (1 << 3)
+#define BIT4 (1 << 4)
+#define BIT5 (1 << 5)
+#define BIT6 (1 << 6)
+#define BIT7 (1 << 7)
+
+struct pm_entry {
+ u8 port;
+ u8 mask;
+ u8 bit;
+};
+struct pm_entry const pm_table[] =
+{
+ {0x5D, 0x00, BIT0},
+ {0xD2, 0xCF, BIT4 + BIT5},
+ {0x12, 0x00, BIT0},
+ {0x28, 0xFF, BIT0},
+ {0x44 + 3, 0x7F, BIT7},
+ {0x48, 0xFF, BIT0},
+ {0x00, 0xFF, 0x0E},
+ {0x00 + 2, 0xFF, 0x40},
+ {0x00 + 3, 0xFF, 0x08},
+ {0x34, 0xEF, BIT0 + BIT1},
+ {0xEC, 0xFD, BIT1},
+ {0x5B, 0xF9, BIT1 + BIT2},
+ {0x08, 0xFE, BIT2 + BIT4},
+ {0x08 + 1, 0xFF, BIT0},
+ {0x54, 0x00, BIT4 + BIT7},
+ {0x04 + 3, 0xFD, BIT1},
+ {0x74, 0xF6, BIT0 + BIT3},
+ {0xF0, ~BIT2, 0x00},
+ {0xF8, 0x00, 0x6C},
+ {0xF8 + 1, 0x00, 0x27},
+ {0xF8 + 2, 0x00, 0x00},
+ {0xC4, 0xFE, 0x14},
+ {0xC0 + 2, 0xBF, 0x40},
+ {0xBE, 0xDD, BIT5},
+ // HPET workaround
+ {0x54 + 3, 0xFC, BIT0 + BIT1},
+ {0x54 + 2, 0x7F, BIT7},
+ {0x54 + 2, 0x7F, 0x00},
+ {0xC4, ~(BIT2 + BIT4), BIT2 + BIT4},
+ {0xC0, 0, 0xF9},
+ {0xC0 + 1, 0x04, 0x03},
+ {0xC2, 0x20, 0x58},
+ {0xC2 + 1, 0, 0x40},
+ {0xC2, ~(BIT4), BIT4},
+ {0x74, 0x00, BIT0 + BIT1 + BIT2 + BIT4},
+ {0xDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1},
+ {0xDE, ~BIT4, BIT4},
+ {0xBA, ~BIT3, BIT3},
+ {0xBA + 1, ~BIT6, BIT6},
+ {0xBC, ~BIT1, BIT1},
+ {0xED, ~(BIT0 + BIT1), 0},
+ {0xDC, 0x7C, BIT0},
+
+// {0xFF, 0xFF, 0xFF},
+
+};
+
+static void sb800_lpc_port80(void)
+{
+ u8 byte;
+ device_t dev;
+
+ /* Enable LPC controller */
+ byte = pmio_read(0xEC);
+ byte |= 1 << 0;
+ pmio_write(0xEC, byte);
+
+ /* Enable port 80 LPC decode in pci function 3 configuration space. */
+ dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+ byte = pci_read_config8(dev, 0x4a);
+ byte |= 1 << 5; /* enable port 80 */
+ pci_write_config8(dev, 0x4a, byte);
+}
+
+/* sbDevicesPorInitTable */
+static void sb800_devices_por_init(void)
+{
+ device_t dev;
+ u8 byte;
+
+ printk(BIOS_INFO, "sb800_devices_por_init()\n");
+ /* SMBus Device, BDF:0-20-0 */
+ printk(BIOS_INFO, "sb800_devices_por_init(): SMBus Device, BDF:0-20-0\n");
+ dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\n");
+ /* NOT REACHED */
+ }
+ printk(BIOS_INFO, "SMBus controller enabled, sb revision is A%x\n",
+ get_sb800_revision());
+
+ /* sbPorAtStartOfTblCfg */
+ /* rpr 4.1.Set A-Link bridge access address.
+ * This is an I/O address. The I/O address must be on 16-byte boundry. */
+ //pci_write_config32(dev, 0xf0, AB_INDX);
+ pmio_write(0xE0, AB_INDX & 0xFF);
+ pmio_write(0xE1, (AB_INDX >> 8) & 0xFF);
+ pmio_write(0xE2, (AB_INDX >> 16) & 0xFF);
+ pmio_write(0xE3, (AB_INDX >> 24) & 0xFF);
+
+ /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */
+ /* 4.2:Enables the SB800 to send transactions upstream over A-Link Express interface. */
+ axcfg_reg(0x04, 1 << 2, 1 << 2);
+ //axindxc_reg(0x21, 0xff, 0);
+
+ /* 4.15:Enabling Non-Posted Memory Write for the K8 Platform */
+ axindxc_reg(0x10, 1 << 9, 1 << 9);
+ /* END of sbPorAtStartOfTblCfg */
+
+ /* sbDevicesPorInitTables */
+ /* set smbus iobase */
+ //pci_write_config32(dev, 0x90, SMBUS_IO_BASE | 1);
+ /* The base address of SMBUS is set in a different way with sb700. */
+ byte = (SMBUS_IO_BASE & 0xFF) | 1;
+ pmio_write(0x2c, byte & 0xFF);
+ pmio_write(0x2d, SMBUS_IO_BASE >> 8);
+
+ /* AcpiMMioDecodeEn */
+ byte = pmio_read(0x24);
+ byte |= 1;
+ byte &= ~(1 << 1);
+ pmio_write(0x24, byte);
+ /* enable smbus controller interface */
+ //byte = pci_read_config8(dev, 0xd2);
+ //byte |= (1 << 0);
+ //pci_write_config8(dev, 0xd2, byte);
+
+ /* KB2RstEnable */
+ //pci_write_config8(dev, 0x40, 0x44);
+
+ /* Enable ISA Address 0-960K decoding */
+ //pci_write_config8(dev, 0x48, 0x0f);
+
+ /* Enable ISA Address 0xC0000-0xDFFFF decode */
+ //pci_write_config8(dev, 0x49, 0xff);
+
+ /* Enable decode cycles to IO C50, C51, C52 GPM controls. */
+ //byte = pci_read_config8(dev, 0x41);
+ //byte &= 0x80;
+ //byte |= 0x33;
+ //pci_write_config8(dev, 0x41, byte);
+
+ /* Legacy DMA Prefetch Enhancement, CIM masked it. */
+ /* pci_write_config8(dev, 0x43, 0x1); */
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* IDE Device, BDF:0-20-1 */
+ printk(BIOS_INFO, "sb800_devices_por_init(): IDE Device, BDF:0-20-1\n");
+ dev = PCI_DEV(0, 0x14, 1);//pci_locate_device(PCI_ID(0x1002, 0x439C), 0);
+ /* Disable prefetch */
+ byte = pci_read_config8(dev, 0x63);
+ byte |= 0x1;
+ pci_write_config8(dev, 0x63, byte);
+
+ /* LPC Device, BDF:0-20-3 */
+ printk(BIOS_INFO, "sb800_devices_por_init(): LPC Device, BDF:0-20-3\n");
+ dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+ /* DMA enable */
+ pci_write_config8(dev, 0x40, 0x04);
+
+ /* IO Port Decode Enable */
+ pci_write_config8(dev, 0x44, 0xFF);
+ pci_write_config8(dev, 0x45, 0xFF);
+ pci_write_config8(dev, 0x46, 0xC3);
+ pci_write_config8(dev, 0x47, 0xFF);
+
+ /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports.
+ * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f),
+ * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65).
+ * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/
+ byte = pci_read_config8(dev, 0x48);
+ byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */
+ byte |= (1 << 3) | (1 << 4); /* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */
+ byte |= 1 << 6; /* enable for RTC I/O range */
+ pci_write_config8(dev, 0x48, byte);
+ pci_write_config8(dev, 0x49, 0xFF);
+ /* Enable 0x480-0x4bf, 0x4700-0x470B */
+ byte = pci_read_config8(dev, 0x4A);
+ byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */
+ pci_write_config8(dev, 0x4A, byte);
+
+ /* Set LPC ROM size, it has been done in sb800_lpc_init().
+ * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB;
+ * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB
+ * pci_write_config16(dev, 0x68, 0x000e)
+ * pci_write_config16(dev, 0x6c, 0xfff0);*/
+
+ /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */
+ pci_write_config8(dev, 0x7C, 0x05);
+
+ /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM,
+ */
+ printk(BIOS_INFO, "sb800_devices_por_init(): P2P Bridge, BDF:0-20-4\n");
+ dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0);
+
+ /* Arbiter enable. */
+ pci_write_config8(dev, 0x43, 0xff);
+
+ /* Set PCDMA request into hight priority list. */
+ /* pci_write_config8(dev, 0x49, 0x1) */ ;
+
+ pci_write_config8(dev, 0x40, 0x26);
+
+ pci_write_config8(dev, 0x0d, 0x40);
+ pci_write_config8(dev, 0x1b, 0x40);
+ /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */
+ pci_write_config8(dev, 0x50, 0x01);
+
+ /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */
+ printk(BIOS_INFO, "sb800_devices_por_init(): SATA Device, BDF:0-18-0\n");
+ dev = PCI_DEV(0, 0x11, 0);//pci_locate_device(PCI_ID(0x1002, 0x4390), 0);
+
+ /*PHY Global Control*/
+ pci_write_config16(dev, 0x86, 0x2C00);
+}
+
+/* sbPmioPorInitTable, Pre-initializing PMIO register space
+* The power management (PM) block is resident in the PCI/LPC/ISA bridge.
+* The PM regs are accessed via IO mapped regs 0xcd6 and 0xcd7.
+* The index address is first programmed into IO reg 0xcd6.
+* Read or write values are accessed through IO reg 0xcd7.
+*/
+#if 0
+static void sb800_pmio_por_init(void)
+{
+ u8 byte, i;
+
+ printk(BIOS_INFO, "sb800_pmio_por_init()\n");
+
+ byte = pmio_read(0xD2);
+ byte |= 3 << 4;
+ pmio_write(0xD2, byte);
+
+ byte = pmio_read(0x5D);
+ byte &= 3;
+ byte |= 1;
+ pmio_write(0x5D, byte);
+
+ /* Watch Dog Timer Control
+ * Set watchdog time base to 0xfec000f0 to avoid SCSI card boot failure.
+ * But I don't find WDT is enabled in SMBUS 0x41 bit3 in CIM.
+ */
+ pmio_write(0x6c, 0xf0);
+ pmio_write(0x6d, 0x00);
+ pmio_write(0x6e, 0xc0);
+ pmio_write(0x6f, 0xfe);
+
+ /* rpr2.15: Enabling Spread Spectrum */
+ byte = pmio_read(0x42);
+ byte |= 1 << 7;
+ pmio_write(0x42, byte);
+ /* TODO: Check if it is necessary. IDE reset */
+ byte = pmio_read(0xB2);
+ byte |= 1 << 0;
+ pmio_write(0xB2, byte);
+
+ for (i=0; i<sizeof(pm_table)/sizeof(struct pm_entry); i++) {
+ byte = pmio_read(pm_table[i].port);
+ byte &= pm_table[i].mask;
+ byte |= pm_table[i].bit;
+ pmio_write(pm_table[i].port, byte);
+ }
+ pmio_write(0x00, 0x0E);
+ pmio_write(0x01, 0x00);
+ pmio_write(0x02, 0x4F);
+ pmio_write(0x03, 0x4A);
+}
+#endif
+
+/*
+* Add any south bridge setting.
+*/
+static void sb800_pci_cfg(void)
+{
+ device_t dev;
+ u8 byte;
+
+ /* SMBus Device, BDF:0-20-0 */
+ dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+ /* Enable watchdog decode timer */
+ byte = pci_read_config8(dev, 0x41);
+ byte |= (1 << 3);
+ pci_write_config8(dev, 0x41, byte);
+
+ /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles)
+ * generated PCIRST#. */
+ byte = pmio_read(0x65);
+ byte |= (1 << 4);
+ pmio_write(0x65, byte);
+
+ /* IDE Device, BDF:0-20-1 */
+ dev = PCI_DEV(0, 0x14, 1);//pci_locate_device(PCI_ID(0x1002, 0x439C), 0);
+ /* Enable IDE Explicit prefetch, 0x63[0] clear */
+ byte = pci_read_config8(dev, 0x63);
+ byte &= 0xfe;
+ pci_write_config8(dev, 0x63, byte);
+
+ /* LPC Device, BDF:0-20-3 */
+ /* The code below is ported from old chipset. It is not
+ * metioned in RPR. But I keep them. The registers and the
+ * comments are compatible. */
+ dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+ /* Enabling LPC DMA function. */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 2);
+ pci_write_config8(dev, 0x40, byte);
+ /* Disabling LPC TimeOut. 0x48[7] clear. */
+ byte = pci_read_config8(dev, 0x48);
+ byte &= 0x7f;
+ pci_write_config8(dev, 0x48, byte);
+ /* Disabling LPC MSI Capability, 0x78[1] clear. */
+ byte = pci_read_config8(dev, 0x78);
+ byte &= 0xfd;
+ pci_write_config8(dev, 0x78, byte);
+
+ /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */
+ dev = PCI_DEV(0, 0x11, 0);//pci_locate_device(PCI_ID(0x1002, 0x4390), 0);
+ /* rpr7.12 SATA MSI and D3 Power State Capability. */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x40, byte);
+ if (get_sb800_revision() <= 0x12)
+ pci_write_config8(dev, 0x34, 0x70); /* set 0x61 to 0x70 if S1 is not supported. */
+ else
+ pci_write_config8(dev, 0x34, 0x50); /* set 0x61 to 0x50 if S1 is not supported. */
+ byte &= ~(1 << 0);
+ pci_write_config8(dev, 0x40, byte);
+}
+
+/*
+*/
+static void sb800_por_init(void)
+{
+ /* sbDevicesPorInitTable + sbK8PorInitTable */
+ sb800_devices_por_init();
+
+ /* sbPmioPorInitTable + sbK8PmioPorInitTable */
+ //sb800_pmio_por_init();
+}
+
+/*
+* It should be called during early POST after memory detection and BIOS shadowing but before PCI bus enumeration.
+*/
+static void sb800_before_pci_init(void)
+{
+ sb800_pci_cfg();
+}
+
+/*
+* This function should be called after enable_sb800_smbus().
+*/
+static void sb800_early_setup(void)
+{
+ printk(BIOS_INFO, "sb800_early_setup()\n");
+ sb800_por_init();
+ sb800_acpi_init();
+}
+
+static int smbus_read_byte(u32 device, u32 address)
+{
+ return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+#endif
diff --git a/src/southbridge/amd/sb800/enable_usbdebug.c b/src/southbridge/amd/sb800/enable_usbdebug.c
new file mode 100644
index 0000000000..d58437a68e
--- /dev/null
+++ b/src/southbridge/amd/sb800/enable_usbdebug.c
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <usbdebug.h>
+#include <device/pci_def.h>
+#include "sb800.h"
+
+#ifndef SB800_DEVN_BASE
+#define SB800_DEVN_BASE 0
+#endif
+
+#define EHCI_EOR (CONFIG_EHCI_BAR + 0x20)
+#define DEBUGPORT_MISC_CONTROL (EHCI_EOR + 0x80)
+
+void set_debug_port(unsigned int port)
+{
+ u32 reg32;
+
+ /* Write the port number to DEBUGPORT_MISC_CONTROL[31:28]. */
+ reg32 = read32(DEBUGPORT_MISC_CONTROL);
+ reg32 &= ~(0xf << 28);
+ reg32 |= (port << 28);
+ reg32 |= (1 << 27); /* Enable Debug Port port number remapping. */
+ write32(DEBUGPORT_MISC_CONTROL, reg32);
+}
+
+
+void sb800_enable_usbdebug(unsigned int port)
+{
+ pci_write_config32(PCI_DEV(0, SB800_DEVN_BASE + 0x13, 5),
+ EHCI_BAR_INDEX, CONFIG_EHCI_BAR);
+ pci_write_config8(PCI_DEV(0, SB800_DEVN_BASE + 0x13, 5), 0x04, 0x2); /* mem space enabe */
+ set_debug_port(port);
+}
diff --git a/src/southbridge/amd/sb800/fadt.c b/src/southbridge/amd/sb800/fadt.c
new file mode 100644
index 0000000000..6eb5c0a737
--- /dev/null
+++ b/src/southbridge/amd/sb800/fadt.c
@@ -0,0 +1,160 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include "sb800.h"
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+
+ printk(BIOS_DEBUG, "pm_base: 0x%04x\n", SB800_ACPI_IO_BASE);
+
+ /* Prepare the header */
+ memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = 244;
+ header->revision = 3;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = (u32) facs;
+ fadt->dsdt = (u32) dsdt;
+ /* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+ fadt->preferred_pm_profile = 0x03;
+ fadt->sci_int = 9;
+ /* disable system management mode by setting to 0: */
+ fadt->smi_cmd = 0;
+ fadt->acpi_enable = 0xf0;
+ fadt->acpi_disable = 0xf1;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0xe2;
+ fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
+ fadt->pm1b_evt_blk = 0x0000;
+ fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
+ fadt->pm1b_cnt_blk = 0x0000;
+ fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
+ fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
+ fadt->gpe0_blk = ACPI_GPE0_BLK;
+ fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+
+ fadt->cst_cnt = 0xe3;
+ fadt->p_lvl2_lat = 101;
+ fadt->p_lvl3_lat = 1001;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 3;
+ fadt->day_alrm = 0; /* 0x7d these have to be */
+ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
+ fadt->century = 0; /* 0x7f to make rtc alrm work */
+ fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
+ fadt->flags = 0x0001c1a5;/* 0x25; */
+
+ fadt->res2 = 0;
+
+ fadt->reset_reg.space_id = 1;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 6;
+ fadt->x_firmware_ctl_l = (u32) facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (u32) dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 32;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
diff --git a/src/southbridge/amd/sb800/hda.c b/src/southbridge/amd/sb800/hda.c
new file mode 100644
index 0000000000..07ae70b49f
--- /dev/null
+++ b/src/southbridge/amd/sb800/hda.c
@@ -0,0 +1,213 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "sb800.h"
+
+#define HDA_ICII_REG 0x68
+#define HDA_ICII_BUSY (1 << 0)
+#define HDA_ICII_VALID (1 << 1)
+
+static int set_bits(u32 port, u32 mask, u32 val)
+{
+ u32 dword;
+ int count;
+
+ /* Write (val & ~mask) to port */
+ val &= mask;
+ dword = read32(port);
+ dword &= ~mask;
+ dword |= val;
+ write32(port, dword);
+
+ /* Wait for readback of register to
+ * match what was just written to it
+ */
+ count = 50;
+ do {
+ /* Wait 1ms based on BKDG wait time */
+ mdelay(1);
+ dword = read32(port);
+ dword &= mask;
+ } while ((dword != val) && --count);
+
+ /* Timeout occured */
+ if (!count)
+ return -1;
+ return 0;
+}
+
+static u32 codec_detect(u32 base)
+{
+ u32 dword;
+
+ /* Before Codec detection, we need to set the GPIO167-170 as
+ * AZ_SDINx. */
+ /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 0) == -1)
+ goto no_codec;
+
+ /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 1) == -1)
+ goto no_codec;
+
+ /* Delay for 1 ms since the BKDG does */
+ mdelay(1);
+
+ /* Read in Codec location (BAR + 0xe)[3..0]*/
+ dword = read32(base + 0xe);
+ dword &= 0x0F;
+ if (!dword)
+ goto no_codec;
+
+ return dword;
+
+no_codec:
+ /* Codec Not found */
+ /* Put HDA back in reset (BAR + 0x8) [0] */
+ set_bits(base + 0x08, 1, 0);
+ printk(BIOS_DEBUG, "No codec!\n");
+ return 0;
+}
+
+/**
+ * Wait 50usec for for the codec to indicate it is ready
+ * no response would imply that the codec is non-operative
+ */
+static int wait_for_ready(u32 base)
+{
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+
+ while(timeout--) {
+ u32 dword=read32(base + HDA_ICII_REG);
+ if (!(dword & HDA_ICII_BUSY))
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+/**
+ * Wait 50usec for for the codec to indicate that it accepted
+ * the previous command. No response would imply that the code
+ * is non-operative
+ */
+static int wait_for_valid(u32 base)
+{
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+ while(timeout--) {
+ u32 dword = read32(base + HDA_ICII_REG);
+ if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+ HDA_ICII_VALID)
+ return 0;
+ udelay(1);
+ }
+
+ return 1;
+}
+
+static void codec_init(u32 base, int addr)
+{
+ u32 dword;
+
+ /* 1 */
+ if (wait_for_ready(base) == -1)
+ return;
+
+ dword = (addr << 28) | 0x000f0000;
+ write32(base + 0x60, dword);
+
+ if (wait_for_valid(base) == -1)
+ return;
+
+ dword = read32(base + 0x64);
+
+ /* 2 */
+ printk(BIOS_DEBUG, "%x(th) codec viddid: %08x\n", addr, dword);
+}
+
+static void codecs_init(u32 base, u32 codec_mask)
+{
+ int i;
+ for (i = 3; i >= 0; i--) {
+ if (codec_mask & (1 << i))
+ codec_init(base, i);
+ }
+}
+
+static void hda_init(struct device *dev)
+{
+ u32 dword;
+ u32 base;
+ struct resource *res;
+ u32 codec_mask;
+
+ /* Program the 2C to 0x437b1002 */
+ dword = 0x43831002;
+ pci_write_config32(dev, 0x2c, dword);
+
+ /* Read in BAR */
+ /* Is this right? HDA allows for a 64-bit BAR
+ * but this is only setup for a 32-bit one
+ */
+ res = find_resource(dev, 0x10);
+ if (!res)
+ return;
+
+ base = (u32)res->base;
+ printk(BIOS_DEBUG, "base = 0x%x\n", base);
+ codec_mask = codec_detect(base);
+
+ if (codec_mask) {
+ printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask);
+ codecs_init(base, codec_mask);
+ }
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations hda_audio_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = hda_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver hdaaudio_driver __pci_driver = {
+ .ops = &hda_audio_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_HDA,
+};
diff --git a/src/southbridge/amd/sb800/ide.c b/src/southbridge/amd/sb800/ide.c
new file mode 100644
index 0000000000..eb287f2cb2
--- /dev/null
+++ b/src/southbridge/amd/sb800/ide.c
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb800.h"
+
+static void ide_init(struct device *dev)
+{
+ struct southbridge_amd_sb800_config *conf;
+ /* Enable ide devices so the linux ide driver will work */
+ u32 dword;
+ u8 byte;
+
+ conf = dev->chip_info;
+
+ /* RPR9.1 disable MSI */
+ /* TODO: For A14, it should set as 1. I doubt it. */
+ dword = pci_read_config32(dev, 0x70);
+ dword &= ~(1 << 16);
+ pci_write_config32(dev, 0x70, dword);
+
+ /* Ultra DMA mode */
+ /* enable UDMA */
+ byte = pci_read_config8(dev, 0x54);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x54, byte);
+
+ /* Enable I/O Access&& Bus Master */
+ dword = pci_read_config16(dev, 0x4);
+ dword |= 1 << 2;
+ pci_write_config16(dev, 0x4, dword);
+
+ /* set ide as primary, if you want to boot from IDE, you'd better set it
+ * in mainboard/Config.lb */
+ if (conf->boot_switch_sata_ide == 1) {
+ byte = pci_read_config8(dev, 0xAD);
+ byte |= 1 << 4;
+ pci_write_config8(dev, 0xAD, byte);
+ }
+
+#if CONFIG_PCI_ROM_RUN == 1
+ pci_dev_init(dev);
+#endif
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations ide_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ide_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver ide_driver __pci_driver = {
+ .ops = &ide_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_IDE,
+};
diff --git a/src/southbridge/amd/sb800/lpc.c b/src/southbridge/amd/sb800/lpc.c
new file mode 100644
index 0000000000..50ff4d4cec
--- /dev/null
+++ b/src/southbridge/amd/sb800/lpc.c
@@ -0,0 +1,243 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pnp.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include "sb800.h"
+
+static void lpc_init(device_t dev)
+{
+ u8 byte;
+ u32 dword;
+ device_t sm_dev;
+
+ /* Enable the LPC Controller */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ dword = pci_read_config32(sm_dev, 0x64);
+ dword |= 1 << 20;
+ pci_write_config32(sm_dev, 0x64, dword);
+
+ /* Initialize isa dma */
+ isa_dma_init();
+
+ /* Enable DMA transaction on the LPC bus */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 2);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Disable the timeout mechanism on LPC */
+ byte = pci_read_config8(dev, 0x48);
+ byte &= ~(1 << 7);
+ pci_write_config8(dev, 0x48, byte);
+
+ /* Disable LPC MSI Capability */
+ byte = pci_read_config8(dev, 0x78);
+ byte &= ~(1 << 1);
+ byte &= ~(1 << 0); /* Keep the old way. i.e., when bus master/DMA cycle is going
+ on on LPC, it holds PCI grant, so no LPC slave cycle can
+ interrupt and visit LPC. */
+ pci_write_config8(dev, 0x78, byte);
+
+ /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads code from SPI rom */
+ /* bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12. */
+ byte = pci_read_config8(dev, 0xBB);
+ byte |= 1 << 0 | 1 << 3;
+ pci_write_config8(dev, 0xBB, byte);
+}
+
+static void sb800_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal pci resources of this device */
+ pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */
+
+ pci_get_resource(dev, 0xA0); /* SPI ROM base address */
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->base = 0;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->base = 0xff800000;
+ res->size = 0x00800000; /* 8 MB for flash */
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ //res = new_resource(dev, 3); /* IOAPIC */
+ //res->base = 0xfec00000;
+ //res->size = 0x00001000;
+ //res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ compact_resources(dev);
+}
+
+static void sb800_lpc_set_resources(struct device *dev)
+{
+ struct resource *res;
+
+ pci_dev_set_resources(dev);
+
+ /* Specical case. SPI Base Address. The SpiRomEnable should be set. */
+ res = find_resource(dev, 0xA0);
+ pci_write_config32(dev, 0xA0, res->base | 1 << 1);
+
+}
+
+/**
+ * @brief Enable resources for children devices
+ *
+ * @param dev the device whos children's resources are to be enabled
+ *
+ */
+static void sb800_lpc_enable_childrens_resources(device_t dev)
+{
+ struct bus *link;
+ u32 reg, reg_x;
+ int var_num = 0;
+ u16 reg_var[3];
+
+ reg = pci_read_config32(dev, 0x44);
+ reg_x = pci_read_config32(dev, 0x48);
+
+ for (link = dev->link_list; link; link = link->next) {
+ device_t child;
+ for (child = link->children; child;
+ child = child->sibling) {
+ if (child->enabled
+ && (child->path.type == DEVICE_PATH_PNP)) {
+ struct resource *res;
+ for (res = child->resource_list; res; res = res->next) {
+ u32 base, end; /* don't need long long */
+ if (!(res->flags & IORESOURCE_IO))
+ continue;
+ base = res->base;
+ end = resource_end(res);
+ printk(BIOS_DEBUG, "sb800 lpc decode:%s, base=0x%08x, end=0x%08x\n",
+ dev_path(child), base, end);
+ switch (base) {
+ case 0x60: /* KB */
+ case 0x64: /* MS */
+ reg |= (1 << 29);
+ break;
+ case 0x3f8: /* COM1 */
+ reg |= (1 << 6);
+ break;
+ case 0x2f8: /* COM2 */
+ reg |= (1 << 7);
+ break;
+ case 0x378: /* Parallal 1 */
+ reg |= (1 << 0);
+ break;
+ case 0x3f0: /* FD0 */
+ reg |= (1 << 26);
+ break;
+ case 0x220: /* Aduio 0 */
+ reg |= (1 << 8);
+ break;
+ case 0x300: /* Midi 0 */
+ reg |= (1 << 18);
+ break;
+ case 0x400:
+ reg_x |= (1 << 16);
+ break;
+ case 0x480:
+ reg_x |= (1 << 17);
+ break;
+ case 0x500:
+ reg_x |= (1 << 18);
+ break;
+ case 0x580:
+ reg_x |= (1 << 19);
+ break;
+ case 0x4700:
+ reg_x |= (1 << 22);
+ break;
+ case 0xfd60:
+ reg_x |= (1 << 23);
+ break;
+ default:
+ if (var_num >= 3)
+ continue; /* only 3 var ; compact them ? */
+ switch (var_num) {
+ case 0:
+ reg_x |= (1 << 2);
+ break;
+ case 1:
+ reg_x |= (1 << 24);
+ break;
+ case 2:
+ reg_x |= (1 << 25);
+ break;
+ }
+ reg_var[var_num++] =
+ base & 0xffff;
+ }
+ }
+ }
+ }
+ }
+ pci_write_config32(dev, 0x44, reg);
+ pci_write_config32(dev, 0x48, reg_x);
+ /* Set WideIO for as many IOs found (fall through is on purpose) */
+ switch (var_num) {
+ case 2:
+ pci_write_config16(dev, 0x90, reg_var[2]);
+ case 1:
+ pci_write_config16(dev, 0x66, reg_var[1]);
+ case 0:
+ pci_write_config16(dev, 0x64, reg_var[0]);
+ break;
+ }
+}
+
+static void sb800_lpc_enable_resources(device_t dev)
+{
+ pci_dev_enable_resources(dev);
+ sb800_lpc_enable_childrens_resources(dev);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations lpc_ops = {
+ .read_resources = sb800_lpc_read_resources,
+ .set_resources = sb800_lpc_set_resources,
+ .enable_resources = sb800_lpc_enable_resources,
+ .init = lpc_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &lops_pci,
+};
+static const struct pci_driver lpc_driver __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_LPC,
+};
diff --git a/src/southbridge/amd/sb800/pci.c b/src/southbridge/amd/sb800/pci.c
new file mode 100644
index 0000000000..465f9de123
--- /dev/null
+++ b/src/southbridge/amd/sb800/pci.c
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb800.h"
+
+static void pci_init(struct device *dev)
+{
+ u32 dword;
+ u8 byte;
+
+ /* RPR 6.1 Enables the PCI-bridge subtractive decode */
+ /* This setting is strongly recommended since it supports some legacy PCI add-on cards,such as BIOS debug cards */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 7;
+ pci_write_config8(dev, 0x4B, byte);
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 5;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* RPR6.2 PCI-bridge upstream dual address window */
+ /* this setting is applicable if the system memory is more than 4GB,and the PCI device can support dual address access */
+ byte = pci_read_config8(dev, 0x50);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x50, byte);
+
+ /* RPR 6.3 Enable One-Prefetch-Channel Mode */
+ dword = pci_read_config32(dev, 0x64);
+ dword |= 1 << 20;
+ pci_write_config32(dev, 0x64, dword);
+
+ /* rpr6.4 Adjusting CLKRUN# */
+ dword = pci_read_config32(dev, 0x64);
+ dword |= (1 << 15);
+ pci_write_config32(dev, 0x64, dword);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .reset_bus = pci_bus_reset,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver pci_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_PCI,
+};
diff --git a/src/southbridge/amd/sb800/pcie.c b/src/southbridge/amd/sb800/pcie.c
new file mode 100644
index 0000000000..569c0f3378
--- /dev/null
+++ b/src/southbridge/amd/sb800/pcie.c
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb800.h"
+
+static void pcie_init(struct device *dev)
+{
+ /* Enable pci error detecting */
+ u32 dword;
+
+ printk(BIOS_INFO, "pcie_init in rs780_ht.c\n");
+
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1 << 8); /* System error enable */
+ dword |= (1 << 30); /* Clear possible errors */
+ pci_write_config32(dev, 0x04, dword);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pcie_init,
+ .scan_bus = pci_scan_bridge,
+ .reset_bus = pci_bus_reset,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver pciea_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_PCIEA,
+};
+
+static const struct pci_driver pcieb_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_PCIEB,
+};
+static const struct pci_driver pciec_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_PCIEC,
+};
+static const struct pci_driver pcied_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_PCIED,
+};
diff --git a/src/southbridge/amd/sb800/reset.c b/src/southbridge/amd/sb800/reset.c
new file mode 100644
index 0000000000..32ee66b4b5
--- /dev/null
+++ b/src/southbridge/amd/sb800/reset.c
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <reset.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+
+#include "../../../northbridge/amd/amdk8/reset_test.c"
+
+void hard_reset(void)
+{
+ set_bios_reset();
+ /* Try rebooting through port 0xcf9 */
+ /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+ outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+ outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
diff --git a/src/southbridge/amd/sb800/sata.c b/src/southbridge/amd/sb800/sata.c
new file mode 100644
index 0000000000..db4d20f54c
--- /dev/null
+++ b/src/southbridge/amd/sb800/sata.c
@@ -0,0 +1,258 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <delay.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "sb800.h"
+
+static int sata_drive_detect(int portnum, u16 iobar)
+{
+ u8 byte, byte2;
+ int i = 0;
+ outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6);
+ while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7),
+ (byte != (0xA0 + 0x10 * (portnum % 2))) ||
+ ((byte2 & 0x88) != 0)) {
+ printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2);
+ if (byte != (0xA0 + 0x10 * (portnum % 2))) {
+ /* This will happen at the first iteration of this loop
+ * if the first SATA port is unpopulated and the
+ * second SATA port is poulated.
+ */
+ printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
+ "retrying init\n", i * 10);
+ return 1;
+ } else
+ printk(BIOS_SPEW, "drive detection not yet completed, "
+ "waiting...\n");
+ mdelay(10);
+ i++;
+ }
+ printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10);
+ return 0;
+}
+
+static void sata_init(struct device *dev)
+{
+ u8 byte;
+ u16 word;
+ u32 dword;
+ u8 rev_id;
+ u32 sata_bar5;
+ u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
+ int i, j;
+
+ struct southbridge_ati_sb800_config *conf;
+ conf = dev->chip_info;
+
+ device_t sm_dev;
+ /* SATA SMBus Disable */
+ /* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ /* get rev_id */
+ rev_id = pci_read_config8(sm_dev, 0x08) - 0x2F;
+
+ /* get base addresss */
+ sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
+ sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
+ sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
+ sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
+ sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3;
+ sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;
+
+ printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */
+ printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */
+ printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */
+ printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */
+ printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */
+ printk(BIOS_SPEW, "sata_bar5=%x\n", sata_bar5); /* e0309000 */
+
+ /* SERR-Enable */
+ word = pci_read_config16(dev, 0x04);
+ word |= (1 << 8);
+ pci_write_config16(dev, 0x04, word);
+
+ /* Set SATA Operation Mode, Set to IDE mode */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 0);
+ //byte |= (1 << 4);
+ pci_write_config8(dev, 0x40, byte);
+
+ dword = 0x01018f00;
+ pci_write_config32(dev, 0x8, dword);
+
+ /* Program the 2C to 0x43801002 */
+ dword = 0x43801002;
+ pci_write_config32(dev, 0x2c, dword);
+
+ pci_write_config8(dev, 0x34, 0x70); /* 8.11 SATA MSI and D3 Power State Capability */
+
+ dword = read32(sata_bar5 + 0xFC);
+ dword &= ~(1 << 11); /* rpr 8.8. Disabling Aggressive Link Power Management */
+ dword &= ~(1 << 12); /* rpr 8.9.1 Disabling Port Multiplier support. */
+ dword &= ~(1 << 10); /* rpr 8.9.2 disabling FIS-based Switching support */
+ dword &= ~(1 << 19); /* rpr 8.10. Disabling CCC (Command Completion Coalescing) Support */
+ write32((sata_bar5 + 0xFC), dword);
+
+ dword = read32(sata_bar5 + 0xF8);
+ dword &= ~(0x3F << 22); /* rpr 8.9.2 disabling FIS-based Switching support */
+ write32(sata_bar5 + 0xF8, dword);
+
+ byte = pci_read_config8(dev, 0x40);
+ byte &= ~(1 << 0);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* rpr 8.3 */
+ printk(BIOS_SPEW, "rev_id=%x\n", rev_id);
+ dword = pci_read_config32(dev, 0x84);
+ if (rev_id == 0x11) /* A11 */
+ dword |= 1 << 22;
+ pci_write_config32(dev, 0x84, dword);
+
+ /* rpr8.12 Program the watchdog counter to 0x20 */
+ byte = pci_read_config8(dev, 0x44);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x44, byte);
+
+ pci_write_config8(dev, 0x46, 0x20);
+
+ /* RPR8.4 */
+ /* Port 0 */
+ for (i = 0; i < 6; i++) {
+ pci_write_config16(dev, 0x84, 0x3006 | i << 9);
+ pci_write_config32(dev, 0x94, 0x0056A700);
+ pci_write_config16(dev, 0x84, 0x2006 | i << 9);
+ pci_write_config32(dev, 0x94, 0x00061400);
+ pci_write_config16(dev, 0x84, 0x1006 | i << 9);
+ pci_write_config32(dev, 0x94, 0x00061302);
+ }
+
+ /* Enable the I/O, MM, BusMaster access for SATA */
+ byte = pci_read_config8(dev, 0x4);
+ byte |= 7 << 0;
+ pci_write_config8(dev, 0x4, byte);
+
+ /* RPR7.7 SATA drive detection. */
+ /* Use BAR5+0x128,BAR0 for Primary Slave */
+ /* Use BAR5+0x1A8,BAR0 for Primary Slave */
+ /* Use BAR5+0x228,BAR2 for Secondary Master */
+ /* Use BAR5+0x2A8,BAR2 for Secondary Slave */
+ /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */
+ /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
+
+ /* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */
+
+ for (i = 0; i < 4; i++) {
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+ printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
+ byte &= 0xF;
+ if( byte == 0x1 ) {
+ /* If the drive status is 0x1 then we see it but we aren't talking to it. */
+ /* Try to do something about it. */
+ printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
+
+ /* Read in Port-N Serial ATA Control Register */
+ byte = read8(sata_bar5 + 0x12C + 0x80 * i);
+
+ /* Set Reset Bit and 1.5g bit */
+ byte |= 0x11;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Clear Reset Bit */
+ byte &= ~0x01;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Reread status */
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+ printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
+ byte &= 0xF;
+ }
+
+ if (byte == 0x3) {
+ for (j = 0; j < 10; j++) {
+ if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2))
+ break;
+ }
+ printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n",
+ (i / 2) ? "Secondary" : "Primary",
+ (i % 2 ) ? "Slave" : "Master",
+ (j == 10) ? "not " : "",
+ (j == 10) ? j : j + 1);
+ } else {
+ printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n",
+ (i / 2) ? "Secondary" : "Primary",
+ (i % 2 ) ? "Slave" : "Master", i);
+ }
+ }
+
+ /* Below is CIM InitSataLateFar */
+ /* Enable interrupts from the HBA */
+ byte = read8(sata_bar5 + 0x4);
+ byte |= 1 << 1;
+ write8((sata_bar5 + 0x4), byte);
+
+ /* Clear error status */
+ write32((sata_bar5 + 0x130), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x230), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x330), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
+
+ /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
+ /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
+
+ /* word = 0x0000; */
+ /* word = pm_ioread(0x28); */
+ /* byte = pm_ioread(0x29); */
+ /* word |= byte<<8; */
+ /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */
+ /* write32(word, 0x80000000); */
+}
+
+static struct pci_operations lops_pci = {
+ /* .set_subsystem = pci_dev_set_subsystem, */
+};
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sata_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver sata0_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_SATA,
+};
diff --git a/src/southbridge/amd/sb800/sb800.c b/src/southbridge/amd/sb800/sb800.c
new file mode 100644
index 0000000000..f6b7d80f3b
--- /dev/null
+++ b/src/southbridge/amd/sb800/sb800.c
@@ -0,0 +1,393 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb800.h"
+#include "smbus.h"
+
+static device_t find_sm_dev(device_t dev, u32 devfn)
+{
+ device_t sm_dev;
+
+ sm_dev = dev_find_slot(dev->bus->secondary, devfn);
+ if (!sm_dev)
+ return sm_dev;
+
+ if ((sm_dev->vendor != PCI_VENDOR_ID_ATI) ||
+ ((sm_dev->device != PCI_DEVICE_ID_ATI_SB800_SM))) {
+ u32 id;
+ id = pci_read_config32(sm_dev, PCI_VENDOR_ID);
+ if ((id !=
+ (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_SB800_SM << 16))))
+ {
+ sm_dev = 0;
+ }
+ }
+
+ return sm_dev;
+}
+
+void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = pci_read_config32(sm_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config32(sm_dev, reg_pos, reg);
+ }
+}
+
+static void pmio_write_index(u16 port_base, u8 reg, u8 value)
+{
+ outb(reg, port_base);
+ outb(value, port_base + 1);
+}
+
+static u8 pmio_read_index(u16 port_base, u8 reg)
+{
+ outb(reg, port_base);
+ return inb(port_base + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM_INDEX, reg, value);
+}
+
+u8 pm_ioread(u8 reg)
+{
+ return pmio_read_index(PM_INDEX, reg);
+}
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM2_INDEX, reg, value);
+}
+
+u8 pm2_ioread(u8 reg)
+{
+ return pmio_read_index(PM2_INDEX, reg);
+}
+
+static void set_pmio_enable_bits(u32 reg_pos, u32 mask, u32 val)
+{
+ u8 reg_old, reg;
+ reg = reg_old = pm_ioread(reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pm_iowrite(reg_pos, reg);
+ }
+}
+
+u16 tx_convert_table[] = {
+ [0x0] = 0xFFFF,
+ [0x1] = 0xFFFE,
+ [0x2] = 0xFFFC,
+ [0x3] = 0xFFF8,
+ [0x4] = 0xFFF0,
+ [0x5] = 0xFFE0,
+ [0x6] = 0xFFC0,
+ [0x7] = 0xFF80,
+ [0x8] = 0xFF00,
+ [0x9] = 0xFE00,
+ [0xA] = 0xFC00,
+ [0xB] = 0xF800,
+ [0xC] = 0xF000,
+ [0xD] = 0xE000,
+ [0xE] = 0xC000,
+ [0xF] = 0x8000
+};
+
+u16 rx_convert_table[] = {
+ [0x0] = 0x0001,
+ [0x1] = 0x0003,
+ [0x2] = 0x0007,
+ [0x3] = 0x000F,
+ [0x4] = 0x001F,
+ [0x5] = 0x003F,
+ [0x6] = 0x007F,
+ [0x7] = 0x00FF,
+ [0x8] = 0x01FF,
+ [0x9] = 0x03FF,
+ [0xA] = 0x07FF,
+ [0xB] = 0x0FFF,
+ [0xC] = 0x1FFF,
+ [0xD] = 0x3FFF,
+ [0xE] = 0x7FFF,
+ [0xF] = 0xFFFF
+};
+
+/* PCIe General Purpose Ports */
+/* v:1814, d:3090. cp421A */
+static void set_sb800_gpp(device_t dev)
+{
+ struct southbridge_amd_sb800_config *conf;
+ u32 imp_rb, lc_status;
+ u8 port;
+
+ conf = dev->chip_info;
+ port = dev->path.pci.devfn & 3;
+
+ /* 5.1 GPP Lane Configuration */
+ /* To support one of 4 legal configurations:
+ * 0000: PortA lanes[3:0]
+ * 0001: N/A
+ * 0010: PortA lanes[1:0], PortB lanes[3:2]
+ * 0011: PortA lanes[1:0], PortB lane2, PortC lane3
+ * 0100: PortA lane0, PortB lane1, PortC lane2, PortD lane3.
+ * Other combinations are not supported.
+ */
+ /* CIMx: Set abcfg:0x90[20] = 1 to enable GPP bridge multi-function */
+ abcfg_reg(0x90, 1 << 20, 1 << 20);
+
+ printk(BIOS_DEBUG, "set_sb800_gpp() 1\n");
+ //abcfg_reg(0xC0, 0xF << 0, 0x4 << 0); /* bimini:4; tarpon:3 */
+ abcfg_reg(0xC0, 0xF << 0, (conf->gpp_configuration & 0xF) << 0); /* bimini:4; tarpon:3 */
+
+ printk(BIOS_DEBUG, "set_sb800_gpp() 2,\n");
+ /* 5.2 Enabling GPP Port A/B/C/D */
+ //abcfg_reg(0xC0, 0xF << 4, 0x1 << 4);
+ abcfg_reg(0xC0, 0xF << 4, dev->enabled ? 0x1 << (4 + port) : 0);
+
+ printk(BIOS_DEBUG, "set_sb800_gpp() 3\n");
+ /* 5.3 Releasing GPP Reset */
+ abcfg_reg(0xC0, 0x1 << 8, 0x0 << 8);
+
+ /* release training */
+ abcfg_reg(0xC0, 0xF << 12, 0x0 << 12);
+ /* 5.4 Power Saving Feature for GPP Lanes. Skip */
+ /* 5.5 PCIe Ports De-emphasis Settings. Skip */
+ abcfg_reg(0x340, 1 << 21, 0 << 21);
+ abcfg_reg(0x344, 1 << 21, 0 << 21);
+ abcfg_reg(0x348, 1 << 21, 0 << 21);
+ abcfg_reg(0x34C, 1 << 21, 0 << 21);
+ /* 5.6 PCIe PHY Calibration Impedance Value Setting */
+ /* AXINDC_Reg 0x60: TX_IMP_RB */
+ outl(0x30, 0xCD8);
+ outl(0x60, 0xCDC);
+ outl(0x34, 0xCD8);
+ imp_rb = inl(0xCDC);
+
+ printk(BIOS_DEBUG, "imp_rb 1=%x\n", imp_rb);
+ /* tx */
+ abcfg_reg(0xA4, 0x1FFF, (rx_convert_table[(imp_rb>>8)&0xF]) & 0x1FFF);
+ abcfg_reg(0xA4, 0x1FFF<<19, ((tx_convert_table[(imp_rb>>4)&0xF] >> 3) & 0x1FFF) << 19);
+
+ /* 5.4. */
+ abcfg_reg(0xA0, 3 << 12, 3 << 12);
+
+ axindxp_reg(0xa0, 0xf<<4, 3<<4);
+ rcindxp_reg(0xA0, 0, 0xF << 4, 1 << 0);
+ rcindxp_reg(0xA0, 1, 0xF << 4, 1 << 0);
+ rcindxp_reg(0xA0, 2, 0xF << 4, 1 << 0);
+ rcindxp_reg(0xA0, 3, 0xF << 4, 1 << 0);
+
+ /* 5.8 Disabling Serial Number Capability */
+ abcfg_reg(0x330, 1 << 26, 0 << 26);
+
+ abcfg_reg(0x50, 0xFFFFFFFF, 0x04000004);
+ abcfg_reg(0x54, 0xFFFFFFFF, 0x00040000);
+ abcfg_reg(0x80, 0xFFFFFFFF, 0x03060001);
+ abcfg_reg(0x90, 0xFFFFFFFF, 0x00300000);
+ abcfg_reg(0x98, 0xFFFFFFFF, 0x03034700);
+
+ pci_write_config32(dev, 0x80, 0x00000006);
+ /* Set PCIEIND_P:PCIE_RX_CNTL[RX_RCB_CPL_TIMEOUT_MODE] (0x70:[19]) = 1 */
+ rcindxp_reg(0x70, 0, 1 << 19, 1 << 19);
+ //outl(3<<29|0<<24|0x70, 0xCD8);
+ /* Set PCIEIND_P:PCIE_TX_CNTL[TX_FLUSH_TLP_DIS] (0x20:[19]) = 0 */
+ rcindxp_reg(0x20, 0, 1 << 19, 0 << 19);
+ printk(BIOS_DEBUG, "imp_rb 5=%x\n", imp_rb);
+ outl(3<<29|0<<24|0xA5, 0xCD8);
+ lc_status = inl(0xCDC);
+ printk(BIOS_DEBUG, "lc_status=%x\n", lc_status);
+}
+
+void sb800_enable(device_t dev)
+{
+ device_t sm_dev = 0;
+ device_t bus_dev = 0;
+ int index = -1;
+ u32 deviceid;
+ u32 vendorid;
+
+ /* struct southbridge_ati_sb800_config *conf; */
+ /* conf = dev->chip_info; */
+ int i;
+
+ u32 devfn, dword;
+
+ printk(BIOS_DEBUG, "sb800_enable()\n");
+
+ /*
+ * 0:11.0 SATA bit 8 of pmio 0xDA : 1 - enable
+ * 0:12.0 OHCI-USB1 bit 0 of pmio 0xEF
+ * 0:12.2 EHCI-USB1 bit 1 of pmio 0xEF
+ * 0:13.0 OHCI-USB2 bit 2 of pmio 0xEF
+ * 0:13.2 EHCI-USB2 bit 3 of pmio 0xEF
+ * 0:16.1 OHCI-USB3 bit 4 of pmio 0xEF
+ * 0:16.2 EHCI-USB3 bit 5 of pmio 0xEF
+ * 0:14.5 OHCI-USB4 bit 6 of pmio 0xEF
+ * 0:14.0 SMBUS 0
+ * 0:14.1 IDE 1
+ * 0:14.2 HDA bit 0 of pm_io 0xEB : 1 - enable
+ * 0:14.3 LPC bit 0 of pm_io 0xEC : 1 - enable
+ * 0:14.4 PCI bit 0 of pm_io 0xEA : 0 - enable
+ * 0:14.6 GEC bit 0 of pm_io 0xF6 : 0 - enable
+ */
+ if (dev->device == 0x0000) {
+ vendorid = pci_read_config32(dev, PCI_VENDOR_ID);
+ deviceid = (vendorid >> 16) & 0xffff;
+ vendorid &= 0xffff;
+ } else {
+ vendorid = dev->vendor;
+ deviceid = dev->device;
+ }
+ bus_dev = dev->bus->dev;
+ if ((bus_dev->vendor == PCI_VENDOR_ID_ATI) &&
+ (bus_dev->device == PCI_DEVICE_ID_ATI_SB800_PCI)) {
+ devfn = (bus_dev->path.pci.devfn) & ~7;
+ sm_dev = find_sm_dev(bus_dev, devfn);
+ if (!sm_dev)
+ return;
+
+ /* something under 00:01.0 */
+ switch (dev->path.pci.devfn) {
+ case 5 << 3:
+ ;
+ }
+
+ return;
+ }
+ printk(BIOS_DEBUG, "sb800_enable() 1\n");
+
+ i = (dev->path.pci.devfn) & ~7;
+ i += (3 << 3);
+ for (devfn = (0x14 << 3); devfn <= i; devfn += (1 << 3)) {
+ sm_dev = find_sm_dev(dev, devfn);
+ if (sm_dev)
+ break;
+ }
+ if (!sm_dev)
+ return;
+ printk(BIOS_DEBUG, "sb800_enable() 2\n");
+
+ switch (dev->path.pci.devfn - (devfn - (0x14 << 3))) {
+ case (0x11 << 3) | 0:
+ index = 8;
+ set_pmio_enable_bits(0xDA, 1 << 0,
+ (dev->enabled ? 1 : 0) << 0);
+ /* Set the device ID of SATA as 0x4390 to reduce the confusing. */
+ dword = pci_read_config32(dev, 0x40);
+ dword |= 1 << 0;
+ pci_write_config32(dev, 0x40, dword);
+ pci_write_config16(dev, 0x2, 0x4390);
+ dword &= ~1;
+ pci_write_config32(dev, 0x40, dword);//for (;;);
+ index += 32 * 3;
+ break;
+ case (0x12 << 3) | 0:
+ case (0x12 << 3) | 2:
+ index = (dev->path.pci.devfn & 0x3) / 2;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ case (0x13 << 3) | 0:
+ case (0x13 << 3) | 2:
+ index = (dev->path.pci.devfn & 0x3) / 2 + 2;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 2;
+ break;
+ case (0x14 << 3) | 0:
+ index = 0;
+ break;
+ case (0x14 << 3) | 1:
+ index = 1;
+ set_pmio_enable_bits(0xDA, 1 << 3,
+ (dev->enabled ? 0 : 1) << 3);
+ break;
+ case (0x14 << 3) | 2:
+ index = 0;
+ set_pmio_enable_bits(0xEB, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ case (0x14 << 3) | 3:
+ index = 0;
+ set_pmio_enable_bits(0xEC, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 1;
+ break;
+ case (0x14 << 3) | 4:
+ index = 0;
+ set_pmio_enable_bits(0xEA, 1 << index,
+ (dev->enabled ? 0 : 1) << index);
+ break;
+ case (0x14 << 3) | 5:
+ index = 6;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ case (0x14 << 3) | 6:
+ /* From linux-2.6.32 to 2.6.34, the broadcom has problems
+ * about the sequence of installing drivers. The solution is
+ * modifying the file "/etc/rc.local", or just running:
+ *
+ * touch /var/lock/subsys/local
+ * modprobe -r tg3
+ * modprobe broadcom
+ * modprobe tg3
+ */
+ index = 0;
+ set_pmio_enable_bits(0xF6, 1 << index,
+ (dev->enabled ? 0 : 1) << index);
+ break;
+ case (0x15 << 3) | 0:
+ set_sb800_gpp(dev);
+ index = 4;
+ break;
+ case (0x15 << 3) | 1:
+ case (0x15 << 3) | 2:
+ case (0x15 << 3) | 3:
+ break;
+ case (0x16 << 3) | 0:
+ case (0x16 << 3) | 2:
+ index = (dev->path.pci.devfn & 0x3) / 2 + 4;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ default:
+ printk(BIOS_DEBUG, "unknown dev: %s deviceid=%4x\n", dev_path(dev),
+ deviceid);
+ }
+}
+
+struct chip_operations southbridge_amd_sb800_ops = {
+ CHIP_NAME("ATI SB800")
+ .enable_dev = sb800_enable,
+};
diff --git a/src/southbridge/amd/sb800/sb800.h b/src/southbridge/amd/sb800/sb800.h
new file mode 100644
index 0000000000..80578c1232
--- /dev/null
+++ b/src/southbridge/amd/sb800/sb800.h
@@ -0,0 +1,60 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB800_H
+#define SB800_H
+
+#include <device/pci_ids.h>
+#include "chip.h"
+
+/* Power management index/data registers */
+#define PM_INDEX 0xcd6
+#define PM_DATA 0xcd7
+#define PM2_INDEX 0xcd0
+#define PM2_DATA 0xcd1
+
+#define SB800_ACPI_IO_BASE 0x800
+
+#define ACPI_PM_EVT_BLK (SB800_ACPI_IO_BASE + 0x00) /* 4 bytes */
+#define ACPI_PM1_CNT_BLK (SB800_ACPI_IO_BASE + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK (SB800_ACPI_IO_BASE + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK (SB800_ACPI_IO_BASE + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (SB800_ACPI_IO_BASE + 0x10) /* 8 bytes */
+#define ACPI_CPU_CONTROL (SB800_ACPI_IO_BASE + 0x08) /* 6 bytes */
+
+extern void pm_iowrite(u8 reg, u8 value);
+extern u8 pm_ioread(u8 reg);
+extern void pm2_iowrite(u8 reg, u8 value);
+extern u8 pm2_ioread(u8 reg);
+extern void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val);
+
+#define REV_SB800_A11 0x11
+#define REV_SB800_A12 0x12
+
+/* This shouldn't be called before set_sb800_revision() is called.
+ * Once set_sb800_revision() is called, we use get_sb800_revision(),
+ * the simpler one, to get the sb800 revision ID.
+ * The id is 0x39 if A11, 0x3A if A12, 0x3C if A14, 0x3D if A15.
+ * The differentiate is 0x28, isn't it? */
+//#define get_sb800_revision(sm_dev) (pci_read_config8((sm_dev), 0x08) - 0x28)
+
+void sb800_enable(device_t dev);
+void sb800_enable_usbdebug(unsigned int port);
+
+#endif /* SB800_H */
diff --git a/src/southbridge/amd/sb800/sm.c b/src/southbridge/amd/sb800/sm.c
new file mode 100644
index 0000000000..9347c42f32
--- /dev/null
+++ b/src/southbridge/amd/sb800/sm.c
@@ -0,0 +1,357 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <pc80/mc146818rtc.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
+#include <stdlib.h>
+#include "sb800.h"
+#include "smbus.c"
+
+#define NMI_OFF 0
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+#define BIT0 (1 << 0)
+#define BIT1 (1 << 1)
+#define BIT2 (1 << 2)
+#define BIT3 (1 << 3)
+#define BIT4 (1 << 4)
+#define BIT5 (1 << 5)
+#define BIT6 (1 << 6)
+#define BIT7 (1 << 7)
+
+#define BIT8 (1 << 8 )
+#define BIT9 (1 << 9 )
+#define BIT10 (1 << 10)
+#define BIT11 (1 << 11)
+#define BIT12 (1 << 12)
+#define BIT13 (1 << 13)
+#define BIT14 (1 << 14)
+#define BIT15 (1 << 15)
+
+#define BIT16 (1 << 16)
+#define BIT17 (1 << 17)
+#define BIT18 (1 << 18)
+#define BIT19 (1 << 19)
+#define BIT20 (1 << 20)
+#define BIT21 (1 << 21)
+#define BIT22 (1 << 22)
+#define BIT23 (1 << 23)
+#define BIT24 (1 << 24)
+#define BIT25 (1 << 25)
+#define BIT26 (1 << 26)
+#define BIT27 (1 << 27)
+#define BIT28 (1 << 28)
+#define BIT29 (1 << 29)
+#define BIT30 (1 << 30)
+#define BIT31 (1 << 31)
+
+/*
+* SB800 enables all USB controllers by default in SMBUS Control.
+* SB800 enables SATA by default in SMBUS Control.
+*/
+
+static void sm_init(device_t dev)
+{
+ u8 byte;
+ u32 ioapic_base;
+
+ printk(BIOS_INFO, "sm_init().\n");
+
+ ioapic_base = 0xFEC00000;//pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */
+ /* Don't rename APIC ID */
+ /* TODO: We should call setup_ioapic() here. But kernel hangs if cpu is K8.
+ * We need to check out why and change back. */
+ clear_ioapic(ioapic_base);
+ //setup_ioapic(ioapic_base, 0);
+
+ /* enable serial irq */
+ byte = pm_ioread(0x54);
+ byte |= 1 << 7; /* enable serial irq function */
+ byte &= ~(0xF << 2);
+ byte |= 4 << 2; /* set NumSerIrqBits=4 */
+ pm_iowrite(0x54, byte);
+
+ pm_iowrite(0x00, 0x0E);
+ pm_iowrite(0x0B, 0x02);
+ /* 2.11 IO Trap Settings */
+ abcfg_reg(0x10090, 1 << 16, 1 << 16);
+
+ /* 4.1 ab index */
+ //pci_write_config32(dev, 0xF0, AB_INDX);
+ pm_iowrite(0xE0, AB_INDX & 0xFF);
+ pm_iowrite(0xE1, (AB_INDX >> 8) & 0xFF);
+ pm_iowrite(0xE2, (AB_INDX >> 16) & 0xFF);
+ pm_iowrite(0xE3, (AB_INDX >> 24) & 0xFF);
+ /* Initialize the real time clock */
+ rtc_init(0);
+
+ byte = pm_ioread(0x8);
+ byte |= 1 << 2 | 1 << 4;
+ pm_iowrite(0x08, byte);
+ byte = pm_ioread(0x9);
+ byte |= 1 << 0;
+ pm_iowrite(0x09, byte);
+
+ abcfg_reg(0x10060, (BIT31), BIT31);
+ abcfg_reg(0x1009C, (BIT4 + BIT5), BIT4 + BIT5);
+ abcfg_reg(0x9C, (BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7), BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7);
+ abcfg_reg(0x90, (BIT21 + BIT22 + BIT23), BIT21 + BIT22 + BIT23);
+ abcfg_reg(0xF0, (BIT6 + BIT5), BIT6 + BIT5);
+ abcfg_reg(0x10090, (BIT9 + BIT10 + BIT11 + BIT12), BIT9 + BIT10 + BIT11 + BIT12);
+ abcfg_reg(0x58, (BIT10), BIT10);
+ abcfg_reg(0xF0, (BIT3 + BIT4), BIT3 + BIT4);
+ abcfg_reg(0x54, (BIT1), BIT1);
+ //
+ axindxc_reg(0x02, BIT9, BIT9);
+ axindxc_reg(0x10, BIT9, BIT9);
+
+ /* 4.2 Enabling Upstream DMA Access */
+ axcfg_reg(0x04, 1 << 2, 1 << 2);
+ /* 4.3 Enabling PCIB Prefetch Settings */
+ abcfg_reg(0x10060, 1 << 20, 1 << 20);
+ abcfg_reg(0x10064, 1 << 20, 1 << 20);
+
+ /* 4.4 Enabling OHCI Prefetch for Performance Enhancement, A12 */
+ abcfg_reg(0x80, 1 << 0, 1<< 0);
+
+ /* 4.5 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */
+ /* 4.6 Enabling Additional Address Bits Checking in Downstream */
+ abcfg_reg(0x9c, 1 << 0, 1 << 0);
+ //abcfg_reg(0x9c, 3 << 0, 3 << 0); //A11
+
+ /* 4.7 Set B-Link Prefetch Mode */
+ abcfg_reg(0x80, 3 << 17, 3 << 17);
+
+ // RPR Enabled SMI ordering enhancement. ABCFG 0x90[21]
+ // RPR USB Delay A-Link Express L1 State. ABCFG 0x90[17]
+ abcfg_reg(0x90, 1 << 17 | 1 << 21, 1 << 17 | 1 << 21);
+ /* 4.8 Enabling Detection of Upstream Interrupts */
+ abcfg_reg(0x94, 1 << 20 | 0x7FFFF, 1 << 20 | 0x00FEE);
+
+ /* 4.9: Enabling Downstream Posted Transactions to Pass Non-Posted
+ * Transactions for the K8 Platform (for All Revisions) */
+ abcfg_reg(0x10090, 1 << 8, 1 << 8);
+
+ /* 4.10:Programming Cycle Delay for AB and BIF Clock Gating */
+ /* 4.11:Enabling AB Int_Arbiter Enhancement (for All Revisions) */
+ abcfg_reg(0x10054, 0xFFFF0000, 0x01040000);
+ abcfg_reg(0x54, 0xFF << 16, 4 << 16);
+ abcfg_reg(0x54, 1 << 24, 0 << 24);
+ abcfg_reg(0x54, 1 << 26, 1 << 26);
+ abcfg_reg(0x98, 0xFFFFFF00, 0x00004700);
+
+ /* 4.12: Enabling AB and BIF Clock Gating */
+ abcfg_reg(0x10054, 0x0000FFFF, 0x07FF);
+
+ /* 4.13:Enabling Requester ID for upstream traffic. */
+ abcfg_reg(0x98, 3 << 16, 3 << 16);
+
+ abcfg_reg(0x50, 1 << 2, 0 << 2);
+
+ /* 5.2 Enabling GPP Port A/B/C/D */
+ //abcfg_reg(0xC0, 0xF << 4, 0xF << 4);
+
+ /* Enable SCI as irq9. */
+ outb(0x10, 0xC00);
+ outb(0x9, 0xC01);
+ /* Enabled IRQ input */
+ outb(0x9, 0xC00);
+ outb(0xF7, 0xC01);
+
+ abcfg_reg(0x90, 0xFFFFFFFF, 0x00F80040);
+ abcfg_reg(0xA0, 0xFFFFFFFF, 0x00000000);
+ abcfg_reg(0xA4, 0xFFFFFFFF, 0x00000000);
+ abcfg_reg(0xC0, 0xFFFFFFFF, 0x0000F014);
+ abcfg_reg(0x98, 0xFFFFFFFF, 0X01034700);
+}
+
+static int lsmbus_recv_byte(device_t dev)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_recv_byte(res->base, device);
+}
+
+static int lsmbus_send_byte(device_t dev, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_send_byte(res->base, device, val);
+}
+
+static int lsmbus_read_byte(device_t dev, u8 address)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static int lsmbus_write_byte(device_t dev, u8 address, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_write_byte(res->base, device, address, val);
+}
+static struct smbus_bus_operations lops_smbus_bus = {
+ .recv_byte = lsmbus_recv_byte,
+ .send_byte = lsmbus_send_byte,
+ .read_byte = lsmbus_read_byte,
+ .write_byte = lsmbus_write_byte,
+};
+
+static void sb800_sm_read_resources(device_t dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */
+ byte = pm_ioread(0x55);
+ byte |= 1 << 7;
+ pm_iowrite(0x55, byte);
+
+ /* Get the normal pci resources of this device */
+ /* pci_dev_read_resources(dev); */
+
+ byte = pm_ioread(0x55);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x55, byte);
+
+ /* apic */
+ res = new_resource(dev, 0x74);
+ res->base = 0xfec00000;
+ res->size = 256 * 0x10;
+ res->limit = 0xFEFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+
+ #if 0 /* Linux ACPI crashes when it is 1. For late debugging. */
+ res = new_resource(dev, 0x14); /* TODO: hpet */
+ res->base = 0xfed00000; /* reset hpet to widely accepted address */
+ res->size = 0x400;
+ res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+ #endif
+ /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */
+
+ /* smbus */
+ //res = new_resource(dev, 0x90);
+ //res->base = 0xB00;
+ //res->size = 0x10;
+ //res->limit = 0xFFFFUL; /* res->base + res->size -1; */
+ //res->align = 8;
+ //res->gran = 8;
+ //res->flags = IORESOURCE_IO | IORESOURCE_FIXED;
+
+
+ compact_resources(dev);
+}
+
+static void sb800_sm_set_resources(struct device *dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ pci_dev_set_resources(dev);
+
+
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ byte = pm_ioread(0x52);
+ byte |= 1 << 6;
+ pm_iowrite(0x52, byte);
+
+ res = find_resource(dev, 0x74);
+
+ printk(BIOS_INFO, "sb800_sm_set_resources, res->base=0x%llx\n", res->base);
+
+ //pci_write_config32(dev, 0x74, res->base | 1 << 3);
+ pm_iowrite(0x34, res->base | 0x7);
+ pm_iowrite(0x35, (res->base >> 8) & 0xFF);
+ pm_iowrite(0x36, (res->base >> 16) & 0xFF);
+ pm_iowrite(0x37, (res->base >> 24) & 0xFF);
+#if 0 /* TODO:hpet */
+ res = find_resource(dev, 0x14);
+ pci_write_config32(dev, 0x14, res->base);
+#endif
+ //res = find_resource(dev, 0x90);
+ //pci_write_config32(dev, 0x90, res->base | 1);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+static struct device_operations smbus_ops = {
+ .read_resources = sb800_sm_read_resources,
+ .set_resources = sb800_sm_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sm_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+static const struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_SM,
+};
diff --git a/src/southbridge/amd/sb800/smbus.c b/src/southbridge/amd/sb800/smbus.c
new file mode 100644
index 0000000000..9db936c31f
--- /dev/null
+++ b/src/southbridge/amd/sb800/smbus.c
@@ -0,0 +1,253 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _SB800_SMBUS_C_
+#define _SB800_SMBUS_C_
+
+#include "smbus.h"
+
+static inline void smbus_delay(void)
+{
+ outb(inb(0x80), 0x80);
+}
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+ u32 loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ u8 val;
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f;
+ if (val == 0) { /* ready now */
+ return 0;
+ }
+ outb(val, smbus_io_base + SMBHSTSTAT);
+ } while (--loops);
+ return -2; /* time out */
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+ u32 loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ u8 val;
+
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f; /* mask off reserved bits */
+ if (val & 0x1c) {
+ return -5; /* error */
+ }
+ if (val == 0x02) {
+ outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */
+ return 0;
+ }
+ } while (--loops);
+ return -3; /* timeout */
+}
+
+int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTCMD);
+
+ return byte;
+}
+
+int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command... */
+ outb(val, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ return 0;
+}
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device,
+ u32 address)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command/address... */
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTDAT0);
+
+ return byte;
+}
+
+int do_smbus_write_byte(u32 smbus_io_base, u32 device,
+ u32 address, u8 val)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command/address... */
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+ /* output value */
+ outb(val, smbus_io_base + SMBHSTDAT0);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ return 0;
+}
+
+void alink_ab_indx(u32 reg_space, u32 reg_addr,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);
+ tmp = inl(AB_DATA);
+ /* rpr 4.2
+ * For certain revisions of the chip, the ABCFG registers,
+ * with an address of 0x100NN (where 'N' is any hexadecimal
+ * number), require an extra programming step.*/
+ outl(0, AB_INDX);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */
+ outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl(tmp, AB_DATA);
+ outl(0, AB_INDX);
+}
+
+void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);
+ tmp = inl(AB_DATA);
+ /* rpr 4.2
+ * For certain revisions of the chip, the ABCFG registers,
+ * with an address of 0x100NN (where 'N' is any hexadecimal
+ * number), require an extra programming step.*/
+ outl(0, AB_INDX);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr);
+ outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl(tmp, AB_DATA);
+ outl(0, AB_INDX);
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ /* read axindc to tmp */
+ outl(space << 29 | space << 3 | 0x30, AB_INDX);
+ outl(axindc, AB_DATA);
+ outl(0, AB_INDX);
+ outl(space << 29 | space << 3 | 0x34, AB_INDX);
+ tmp = inl(AB_DATA);
+ outl(0, AB_INDX);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ /* write tmp */
+ outl(space << 29 | space << 3 | 0x30, AB_INDX);
+ outl(axindc, AB_DATA);
+ outl(0, AB_INDX);
+ outl(space << 29 | space << 3 | 0x34, AB_INDX);
+ outl(tmp, AB_DATA);
+ outl(0, AB_INDX);
+}
+#endif
diff --git a/src/southbridge/amd/sb800/smbus.h b/src/southbridge/amd/sb800/smbus.h
new file mode 100644
index 0000000000..fce8e96572
--- /dev/null
+++ b/src/southbridge/amd/sb800/smbus.h
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB800_SMBUS_H
+#define SB800_SMBUS_H
+
+//#include <stdint.h>
+
+#define SMBHSTSTAT 0x0
+#define SMBSLVSTAT 0x1
+#define SMBHSTCTRL 0x2
+#define SMBHSTCMD 0x3
+#define SMBHSTADDR 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBHSTBLKDAT 0x7
+
+#define SMBSLVCTRL 0x8
+#define SMBSLVCMD_SHADOW 0x9
+#define SMBSLVEVT 0xa
+#define SMBSLVDAT 0xc
+
+#define AX_INDXC 0
+#define AX_INDXP 2
+#define AXCFG 4
+#define ABCFG 6
+#define RC_INDXC 1
+#define RC_INDXP 3
+
+#define AB_INDX 0xCD8
+#define AB_DATA (AB_INDX+4)
+
+/* Between 1-10 seconds, We should never timeout normally
+ * Longer than this is just painful when a timeout condition occurs.
+ */
+#define SMBUS_TIMEOUT (100*1000*10)
+
+#define abcfg_reg(reg, mask, val) \
+ alink_ab_indx((ABCFG), (reg), (mask), (val))
+#define axcfg_reg(reg, mask, val) \
+ alink_ab_indx((AXCFG), (reg), (mask), (val))
+#define axindxc_reg(reg, mask, val) \
+ alink_ax_indx((AX_INDXC), (reg), (mask), (val))
+#define axindxp_reg(reg, mask, val) \
+ alink_ax_indx((AX_INDXP), (reg), (mask), (val))
+#define rcindxc_reg(reg, port, mask, val) \
+ alink_rc_indx((RC_INDXC), (reg), (port), (mask), (val))
+#define rcindxp_reg(reg, port, mask, val) \
+ alink_rc_indx((RC_INDXP), (reg), (port), (mask), (val))
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
+int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);
+int do_smbus_recv_byte(u32 smbus_io_base, u32 device);
+int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val);
+void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val);
+void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val);
+void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val);
+
+
+#endif
diff --git a/src/southbridge/amd/sb800/usb.c b/src/southbridge/amd/sb800/usb.c
new file mode 100644
index 0000000000..473ff5e199
--- /dev/null
+++ b/src/southbridge/amd/sb800/usb.c
@@ -0,0 +1,234 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <usbdebug.h>
+#include <arch/io.h>
+#include "sb800.h"
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static void usb_init(struct device *dev)
+{
+ u8 byte;
+ u16 word;
+
+ /* 7.1 Enable OHCI0-4 and EHCI Controllers */
+ /* pmio 0xEF; */
+
+ /* RPR 7.2 USB S4/S5 Wake-up or PHY Power-down Support */
+ byte = pm_ioread(0xF0);
+ byte |= 1 << 0; /* A12, USB Wake from S5 not supported on the platform */
+ pm_iowrite(0xF0, byte);
+
+ /* RPR 7.4 Enable the USB controller to get reset by any software that generate a PCIRst# condition */
+ byte = pm_ioread(0xF0);
+ byte |= (1 << 2);
+ byte |= 3 << 8; /* rpr 7.5 */
+ pm_iowrite(0xF0, byte);
+
+ /* RPR 7.9 Disable OHCI MSI Capability. */
+ word = pci_read_config16(dev, 0x40);
+ word |= (0x1 << 8);
+ pci_write_config16(dev, 0x40, word);
+}
+
+static void usb_init2(struct device *dev)
+{
+ u32 dword;
+ u32 usb2_bar0;
+ device_t sm_dev;
+
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ //rev = get_sb800_revision(sm_dev);
+
+ /* dword = pci_read_config32(dev, 0xf8); */
+ /* dword |= 40; */
+ /* pci_write_config32(dev, 0xf8, dword); */
+
+ usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
+ printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);
+
+ /* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistence */
+ dword = 0x00020F00;
+ write32(usb2_bar0 + 0xC0, dword);
+
+ /* RPR7.8 Sets In/OUT FIFO threshold for best performance */
+ dword = 0x00400040;
+ write32(usb2_bar0 + 0xA4, dword);
+
+ /* RPR7.10 Disable EHCI MSI support */
+ dword = pci_read_config32(dev, 0x50);
+ dword |= (1 << 6);
+ pci_write_config32(dev, 0x50, dword);
+
+ /* RPR7.12 EHCI Async Park Mode */
+ dword = pci_read_config32(dev, 0x50);
+ dword &= ~(0xF << 8);
+ dword &= ~(0xF << 12);
+ dword |= 1 << 8;
+ dword |= 2 << 12;
+ pci_write_config32(dev, 0x50, dword);
+
+ /* RPR 6.12 EHCI Advance PHY Power Savings */
+ /* RPR says it is just for A12. CIMM sets it when it is above A11. */
+ /* But it makes the linux crash, so we skip it */
+ #if 0
+ dword = pci_read_config32(dev, 0x50);
+ dword |= 1 << 31;
+ pci_write_config32(dev, 0x50, dword);
+ #endif
+
+ /* Each step below causes the linux crashes. Leave them here
+ * for future debugging. */
+#if 0
+ u8 byte;
+ u16 word;
+
+
+ /* RPR6.17 Disable the EHCI Dynamic Power Saving feature */
+ word = read32(usb2_bar0 + 0xBC);
+ word &= ~(1 << 12);
+ write16(usb2_bar0 + 0xBC, word);
+
+ /* RPR6.19 USB Controller DMA Read Delay Tolerant. */
+ if (rev >= REV_SB800_A14) {
+ byte = pci_read_config8(dev, 0x50);
+ byte |= (1 << 7);
+ pci_write_config8(dev, 0x50, byte);
+ }
+
+ /* RPR6.20 Async Park Mode. */
+ /* RPR recommends not to set these bits. */
+ #if 0
+ dword = pci_read_config32(dev, 0x50);
+ dword |= 1 << 23;
+ if (rev >= REV_SB800_A14) {
+ dword &= ~(1 << 2);
+ }
+ pci_write_config32(dev, 0x50, dword);
+ #endif
+
+ /* RPR6.22 Advance Async Enhancement */
+ /* RPR6.23 USB Periodic Cache Setting */
+ dword = pci_read_config32(dev, 0x50);
+ if (rev == REV_SB800_A12) {
+ dword |= 1 << 28; /* 6.22 */
+ dword |= 1 << 27; /* 6.23 */
+ } else if (rev >= REV_SB800_A14) {
+ dword |= 1 << 3;
+ dword &= ~(1 << 28); /* 6.22 */
+ dword |= 1 << 8;
+ dword &= ~(1 << 27); /* 6.23 */
+ }
+ printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword);
+#endif
+}
+
+static void usb_set_resources(struct device *dev)
+{
+#if CONFIG_USBDEBUG
+ struct resource *res;
+ u32 base;
+ u32 old_debug;
+
+ old_debug = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+ pci_dev_set_resources(dev);
+
+#if CONFIG_USBDEBUG
+ res = find_resource(dev, 0x10);
+ set_ehci_debug(old_debug);
+ if (!res)
+ return;
+ base = res->base;
+ set_ehci_base(base);
+ report_resource_stored(dev, res, "");
+#endif
+
+}
+
+static struct device_operations usb_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = usb_set_resources, /* pci_dev_set_resources, */
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver usb_0_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_USB_18_0,
+};
+static const struct pci_driver usb_1_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_USB_18_2,
+};
+
+/* the pci id of usb ctrl 0 and 1 are the same. */
+/*
+ * static const struct pci_driver usb_3_driver __pci_driver = {
+ * .ops = &usb_ops,
+ * .vendor = PCI_VENDOR_ID_ATI,
+ * .device = PCI_DEVICE_ID_ATI_SB800_USB_19_0,
+ * };
+ * static const struct pci_driver usb_4_driver __pci_driver = {
+ * .ops = &usb_ops,
+ * .vendor = PCI_VENDOR_ID_ATI,
+ * .device = PCI_DEVICE_ID_ATI_SB800_USB_19_1,
+ * };
+ */
+
+static const struct pci_driver usb_4_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_USB_20_5,
+};
+
+static struct device_operations usb_ops2 = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = usb_set_resources, /* pci_dev_set_resources, */
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init2,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver usb_5_driver __pci_driver = {
+ .ops = &usb_ops2,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB800_USB_18_2,
+};
+/*
+ * static const struct pci_driver usb_5_driver __pci_driver = {
+ * .ops = &usb_ops2,
+ * .vendor = PCI_VENDOR_ID_ATI,
+ * .device = PCI_DEVICE_ID_ATI_SB800_USB_19_2,
+ * };
+ */