Update AMD SR5650 and SB700

This updates the code for the AMD SR5650 and SB700 southbridges.
Among other things, it changes the romstage.c files by replacing a
.C file include with a pair of .H file includes.  The .C file is
now added to the romstage in the SB700 or SR5650 Makefile.inc.
file to the romstage and ramstage elements.  This particular change
affects all mainboards that use the SB700, and their changes are
include herein.  These mainboards are:
  Advansus a785e,
  AMD Mahogany, Mahogany-fam10, Tilapia-fam10,
  Asrock 939a785gmh,
  Asus m4a78-em, m4a785-m,
  Gigabyte ma785gm,
  Iei Kino-780am2-fam10
  Jetway pa78vm5
  Supermicro h8scm_fam10
The nuvoton/wpcm450 earlysetup interface is changed because the file
is no longer included in the mainboard romstage.c files.

Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Signed-off-by: efdesign98 <efdesign98@gmail.com>
Reviewed-on: http://review.coreboot.org/107
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry She <shekairui@gmail.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>

1 files changed, 66 insertions, 20 deletions

diff --git a/src/southbridge/amd/sr5650/pcie.c b/src/southbridge/amd/sr5650/pcie.c
index 3ad5a7d3c3..37743cacae 100644..100755
--- a/src/southbridge/amd/sr5650/pcie.c
+++ b/src/southbridge/amd/sr5650/pcie.c
@@ -267,23 +267,25 @@ void disable_pcie_bar3(device_t nb_dev)
 }
 
 /*
-*/
+ * GEN2 Software Compliance
+ */
 void init_gen2(device_t nb_dev, device_t dev, u8 port)
 {
 	u32 reg, val;
+
 	/* for A11 (0x89 == 0) */
 	reg = 0x34;
-	if (port <= 3){
+	if (port <= 3) {
 		val = 1<<5;
-	}else{
+	} else {
 		val = 1<<31;
-		if (port >= 9 )
+		if (port >= 9)
 			reg = 0x39;
 	}
 
-	/* todo: check for rev > a11
+	/* TODO: check for rev > a11 */
 	switch (port) {
-		case 2;
+		case 2:
 			reg = 0x34;
 			val = 1<<5;
 			break;
@@ -300,7 +302,9 @@ void init_gen2(device_t nb_dev, device_t dev, u8 port)
 			reg = 0x39;
 			val = 1<<31;
 			break;
-		case 7..9:
+		case 7:
+		case 8:
+		case 9:
 			reg = 0x37;
 			val = 1<<port;
 			break;
@@ -312,9 +316,11 @@ void init_gen2(device_t nb_dev, device_t dev, u8 port)
 			reg = 0;
 			break;
 	}
-	*/
+
+	/* Enables GEN2 capability of the device */
 	set_pcie_enable_bits(dev, 0xA4, 0x1, 0x1);
-	pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1<<2); /* LINK_CRTL2*/
+	/* Advertise the link speed to be Gen2 */
+	pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1<<2); /* LINK_CRTL2 */
 	set_nbmisc_enable_bits(nb_dev, reg, val, val);
 }
 
@@ -409,7 +415,7 @@ static void gpp12_cpl_buf_alloc(device_t nb_dev, device_t dev)
 	}
 }
 
-#if 0				/* BTS report error without this function. But some board
+#if 1				/* BTS report error without this function. But some board
 				 * fail to boot. Leave it here for future debug. */
 
 /*
@@ -424,6 +430,7 @@ static void EnableLclkGating(device_t dev)
 	device_t nb_dev = dev_find_slot(0, 0);
 	device_t clk_f1= dev_find_slot(0, 1);
 
+	reg = 0xE8;
 	port = dev->path.pci.devfn >> 3;
 	switch (port) {
  		//PCIE_CORE_INDEX_GPP1
@@ -436,7 +443,6 @@ static void EnableLclkGating(device_t dev)
  		//PCIE_CORE_INDEX_GPP2
 		case 11:
 		case 12:
-			reg = 0xE8;
 			value = 1 << 28;
 			break;
 
@@ -444,13 +450,11 @@ static void EnableLclkGating(device_t dev)
 		case 4 ... 7:
 		case 9:
 		case 10:
-			reg = 0xE8;
 			value = 1 << 31;
 			break;
 
 		//PCIE_CORE_INDEX_GPP3b;
 		case 13:
-			reg = 0xE8;
 			value = 1 << 25;
 			break;
 
@@ -541,6 +545,14 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	/* 4.4.2.step13.6. Set REGS_LC_ALLOW_TX_L1_CONTROL to allow TX to
 	   prevent LC from going to L1 when there are outstanding completions.*/
 	set_pcie_enable_bits(dev, 0x02, 1 << 15, 1 << 15);
+
+	/* Enables the PLL power down when all lanes are inactive.
+	 * It should be on in GPP.
+	 */
+	if (gpp_sb_sel == PCIE_CORE_INDEX_GPP3a || gpp_sb_sel == PCIE_CORE_INDEX_GPP3b || gpp_sb_sel == PCIE_CORE_INDEX_SB) {
+		set_pcie_enable_bits(nb_dev, 0x02 | gpp_sb_sel, 1 << 3, 1 << 3);
+	}
+
 	/* 4.4.2.step13.7. Set REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent
 	   lc to go to from L0 to Rcv_L0s if L1 is armed. */
 	set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11);
@@ -594,8 +606,11 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	 * RPR typo- it says enable but the bit setting says disable.
 	 * Disable it here and we enable it later. */
 	set_pcie_enable_bits(dev, 0xA4, 1 << 0, 1 << 0);
-	/* 4.4.2.step13.21. */
-	/* 4.4.2.step13.22 */
+
+	/* 4.4.2.step13.21. Legacy Hot Plug  -CMOS Option */
+	/* NOTE: This feature can be enabled only for Hot-Plug slots implemented on SR5690 platform. */
+
+	/* 4.4.2.step13.22. Native PCIe Mode -CMOS Option */
 	/* Enable native PME. */
 	set_pcie_enable_bits(dev, 0x10, 1 << 3, 1 < 3);
 	/* This bit when set indicates that the PCIe Link associated with this port
@@ -607,7 +622,7 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	/* Enables flushing of TLPs when Data Link is down. */
 	set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
 
-	/* 4.4.2.step14. Server Class Hot Plug Feature */
+	/* 4.4.2.step14. Server Class Hot Plug Feature. NOTE: This feature is not supported on SR5670 and SR5650 */
 	/* 4.4.2 step14.1: Advertising Hot Plug Capabilities */
 	/* 4.4.2.step14.2: Firmware Upload */
 	/* 4.4.2.Step14.3: SBIOS Acknowledgment to Firmware of Successful Firmware Upload */
@@ -630,11 +645,13 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	if ( port == 8 )
 		set_pcie_enable_bits(dev, 0xA0, 0, 1 << 23);
 
+#if 0 //SR56x0 pcie Gen2 code is not tested yet, we should enable it again when test finished.
 	/* set automatic Gen2 support, needs mainboard config option as Gen2 can cause issues on some platforms. */
 	init_gen2(nb_dev, dev, port);
 	set_pcie_enable_bits(dev, 0xA4, 1 << 29, 1 << 29);
 	set_pcie_enable_bits(dev, 0xC0, 1 << 15, 0);
 	set_pcie_enable_bits(dev, 0xA2, 1 << 13, 0);
+#endif
 
 	/* Hotplug Support - bit5 + bit6  capable and surprise */
 	pci_ext_write_config32(nb_dev, dev, 0x6c, 0x60, 0x60);
@@ -715,12 +732,13 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	/* 4.4..7.1 TXCLK Gating in L1, Enables powering down TXCLK clock pads on the receive side. */
 	set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 1 << 6, 1 << 6);
 
-	/* Step 21: Register Locking PCIE Misc. Late Core sttting - Must move somewhere do PciInitLate FIXME */
-	/* Lock HWInit Register */
-	//set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 1 << 0, 1 << 0);
+	/* Step 20: Disables immediate RCB timeout on link down */
+	if (!((pci_read_config32(dev, 0x6C ) >> 6) & 0x01)) {
+		set_pcie_enable_bits(dev, 0x70, 1 << 19, 0 << 19);
+	}
 
 	/* Step 27: LCLK Gating	*/
-	//EnableLclkGating(dev);
+	EnableLclkGating(dev);
 
 	/* Set Common Clock */
 	/* If dev present, set PcieCapPtr+0x10, BIT6);
@@ -734,6 +752,34 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	}
 }
 
+/**
+ * Step 21: Register Locking
+ * Lock HWInit Register of each pcie core
+ */
+static void lock_hwinitreg(device_t nb_dev)
+{
+	/* Step 21: Register Locking, Lock HWInit Register */
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP1, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_SB, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP2, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP3a, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP3b, 1 << 0, 1 << 0);
+}
+
+/**
+ * Lock HWInit Register
+ */
+void sr56x0_lock_hwinitreg(void)
+{
+	device_t nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+
+	/* Lock HWInit Register */
+	lock_hwinitreg(nb_dev);
+
+	/* Lock HWInit Register NBMISCIND:0x0 NBCNTL[7] HWINIT_WR_LOCK */
+	set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7);
+}
+
 /*****************************************
 * Compliant with CIM_33's PCIEConfigureGPPCore
 *****************************************/