diff options
author | Alexandru Gagniuc <mr.nuke.me@gmail.com> | 2015-09-28 21:39:12 -0700 |
---|---|---|
committer | Alexandru Gagniuc <mr.nuke.me@gmail.com> | 2015-10-03 22:22:54 +0000 |
commit | ecf2eb463faff04ab6061eb5dfd8da26c5026a97 (patch) | |
tree | 4eca305b3d9e4b7d29caa664a1a1a923a06fa224 /src/southbridge/intel/bd82x6x/early_me.c | |
parent | ac1f4b86f4a82f00c07aa21707703c5c70d9c604 (diff) | |
download | coreboot-ecf2eb463faff04ab6061eb5dfd8da26c5026a97.tar.xz |
sandybridge ivybridge: Treat native init as first class citizen
This is a sad story. We have three different code paths for
sandybridge and ivybridge: proper native path, google MRC path, and,
everyone's favorite: Intel FSP path. For the purpose of this patch,
the FSP path lives in its own little world, and doesn't concern us.
Since MRC was first, when native files and variables were added, they
were suffixed with "_native" to separate them from the existing code.
This can cause confusion, as the suffix might make the native files
seem parasitical.
This has been bothering me for many months. MRC should be the
parasitical path, especially since we fully support native init, and
it works more reliably, on a wider range of hardware. There have been
a few board ports that never made it to coreboot.org because MRC would
hang.
gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so
the effort was abandoned at first. Once the native path became
available, the effort was restarted and the board is now supported.
In honor of the hackers and pioneers who made the native code
possible, rename things so that their effort is the first class
citizen.
Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11788
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Diffstat (limited to 'src/southbridge/intel/bd82x6x/early_me.c')
-rw-r--r-- | src/southbridge/intel/bd82x6x/early_me.c | 129 |
1 files changed, 97 insertions, 32 deletions
diff --git a/src/southbridge/intel/bd82x6x/early_me.c b/src/southbridge/intel/bd82x6x/early_me.c index b7dbf3439f..ed9351fc16 100644 --- a/src/southbridge/intel/bd82x6x/early_me.c +++ b/src/southbridge/intel/bd82x6x/early_me.c @@ -44,13 +44,6 @@ static inline void pci_read_dword_ptr(void *ptr, int offset) memcpy(ptr, &dword, sizeof(dword)); } -static inline void pci_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - pci_write_config32(PCH_ME_DEV, offset, dword); -} - void intel_early_me_status(void) { struct me_hfs hfs; @@ -125,64 +118,136 @@ static inline void set_global_reset(int enable) int intel_early_me_init_done(u8 status) { - u8 reset; - int count; + u8 reset, errorcode, opmode; + u16 reg16; u32 mebase_l, mebase_h; - struct me_hfs hfs; + u32 millisec; + u32 hfs, me_fws2; struct me_did did = { .init_done = ME_INIT_DONE, .status = status }; + u32 meDID; + + hfs = (pci_read_config32(PCI_DEV(0, 0x16, 0), PCI_ME_HFS) & 0xff000) >> 12; + + opmode = (hfs & 0xf0) >> 4; + errorcode = hfs & 0xf; + + if (opmode != ME_HFS_MODE_NORMAL) { + printk(BIOS_NOTICE, "ME: Wrong mode : %d\n", opmode); + //return 0; + } + if (errorcode) { + printk(BIOS_NOTICE, "ME: HFS error : %d\n", errorcode); + //return 0; + } + + me_fws2 = pci_read_config32(PCI_DEV(0, 0x16, 0), 0x48); + printk(BIOS_NOTICE, "ME: FWS2: 0x%x\n", me_fws2); + printk(BIOS_NOTICE, "ME: Bist in progress: 0x%x\n", me_fws2 & 0x1); + printk(BIOS_NOTICE, "ME: ICC Status : 0x%x\n", (me_fws2 & 0x6) >> 1); + printk(BIOS_NOTICE, "ME: Invoke MEBx : 0x%x\n", (me_fws2 & 0x8) >> 3); + printk(BIOS_NOTICE, "ME: CPU replaced : 0x%x\n", (me_fws2 & 0x10) >> 4); + printk(BIOS_NOTICE, "ME: MBP ready : 0x%x\n", (me_fws2 & 0x20) >> 5); + printk(BIOS_NOTICE, "ME: MFS failure : 0x%x\n", (me_fws2 & 0x40) >> 6); + printk(BIOS_NOTICE, "ME: Warm reset req : 0x%x\n", (me_fws2 & 0x80) >> 7); + printk(BIOS_NOTICE, "ME: CPU repl valid : 0x%x\n", (me_fws2 & 0x100) >> 8); + printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0x600) >> 9); + printk(BIOS_NOTICE, "ME: FW update req : 0x%x\n", (me_fws2 & 0x800) >> 11); + printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0xf000) >> 12); + printk(BIOS_NOTICE, "ME: Current state : 0x%x\n", (me_fws2 & 0xff0000) >> 16); + printk(BIOS_NOTICE, "ME: Current PM event: 0x%x\n", (me_fws2 & 0xf000000) >> 24); + printk(BIOS_NOTICE, "ME: Progress code : 0x%x\n", (me_fws2 & 0xf0000000) >> 28); + + // Poll cpu replaced for 50ms + millisec = 0; + while ((((me_fws2 & 0x100) >> 8) == 0) && millisec < 50) { + udelay(1000); + me_fws2 = pci_read_config32(PCI_DEV(0, 0x16, 0), 0x48); + millisec++; + } + if (millisec >= 50 || ((me_fws2 & 0x100) >> 8) == 0x0) { + printk(BIOS_NOTICE, "Waited long enough, or CPU was not replaced, continue...\n"); + } else if ((me_fws2 & 0x100) == 0x100) { + if ((me_fws2 & 0x80) == 0x80) { + printk(BIOS_NOTICE, "CPU was replaced & warm reset required...\n"); + reg16 = pcie_read_config16(PCI_DEV(0, 31, 0), 0xa2) & ~0x80; + pcie_write_config16(PCI_DEV(0, 31, 0), 0xa2, reg16); + set_global_reset(0); + outb(0x6, 0xcf9); + halt(); + } + + if (((me_fws2 & 0x10) == 0x10) && (me_fws2 & 0x80) == 0x00) { + printk(BIOS_NOTICE, "Full training required\n"); + } + } + + printk(BIOS_NOTICE, "PASSED! Tell ME that DRAM is ready\n"); /* MEBASE from MESEG_BASE[35:20] */ mebase_l = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_L); mebase_h = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_H) & 0xf; did.uma_base = (mebase_l >> 20) | (mebase_h << 12); - /* Send message to ME */ - printk(BIOS_DEBUG, "ME: Sending Init Done with status: %d, " - "UMA base: 0x%04x\n", status, did.uma_base); + meDID = did.uma_base | (1 << 28);// | (1 << 23); + pci_write_config32(PCI_DEV(0, 0x16, 0), PCI_ME_H_GS, meDID); - pci_write_dword_ptr(&did, PCI_ME_H_GS); + udelay(1100); /* Must wait for ME acknowledgement */ - for (count = ME_RETRY; count > 0; --count) { - pci_read_dword_ptr(&hfs, PCI_ME_HFS); - if (hfs.bios_msg_ack) - break; - udelay(ME_DELAY); - } - if (!count) { - printk(BIOS_ERR, "ERROR: ME failed to respond\n"); - return -1; + millisec = 0; + hfs = (pci_read_config32(PCI_DEV(0, 0x16, 0), PCI_ME_HFS) & 0xfe000000) >> 24; + while ((((hfs & 0xf0) >> 4) != ME_HFS_BIOS_DRAM_ACK) && (millisec < 5000)) { + udelay(1000); + hfs = (pci_read_config32(PCI_DEV(0, 0x16, 0), PCI_ME_HFS) & 0xfe000000) >> 24; + millisec++; } + me_fws2 = pci_read_config32(PCI_DEV(0, 0x16, 0), 0x48); + printk(BIOS_NOTICE, "ME: FWS2: 0x%x\n", me_fws2); + printk(BIOS_NOTICE, "ME: Bist in progress: 0x%x\n", me_fws2 & 0x1); + printk(BIOS_NOTICE, "ME: ICC Status : 0x%x\n", (me_fws2 & 0x6) >> 1); + printk(BIOS_NOTICE, "ME: Invoke MEBx : 0x%x\n", (me_fws2 & 0x8) >> 3); + printk(BIOS_NOTICE, "ME: CPU replaced : 0x%x\n", (me_fws2 & 0x10) >> 4); + printk(BIOS_NOTICE, "ME: MBP ready : 0x%x\n", (me_fws2 & 0x20) >> 5); + printk(BIOS_NOTICE, "ME: MFS failure : 0x%x\n", (me_fws2 & 0x40) >> 6); + printk(BIOS_NOTICE, "ME: Warm reset req : 0x%x\n", (me_fws2 & 0x80) >> 7); + printk(BIOS_NOTICE, "ME: CPU repl valid : 0x%x\n", (me_fws2 & 0x100) >> 8); + printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0x600) >> 9); + printk(BIOS_NOTICE, "ME: FW update req : 0x%x\n", (me_fws2 & 0x800) >> 11); + printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0xf000) >> 12); + printk(BIOS_NOTICE, "ME: Current state : 0x%x\n", (me_fws2 & 0xff0000) >> 16); + printk(BIOS_NOTICE, "ME: Current PM event: 0x%x\n", (me_fws2 & 0xf000000) >> 24); + printk(BIOS_NOTICE, "ME: Progress code : 0x%x\n", (me_fws2 & 0xf0000000) >> 28); + + /* Return the requested BIOS action */ printk(BIOS_NOTICE, "ME: Requested BIOS Action: %s\n", - me_ack_values[hfs.ack_data]); - - /* Check status after acknowledgement */ - intel_early_me_status(); + me_ack_values[(hfs & 0xe) >> 1]); - reset = 0; - switch (hfs.ack_data) { + reset = inb(0xcf9); + reset &= 0xf1; + switch ((hfs & 0xe) >> 1) { + case ME_HFS_ACK_NO_DID: case ME_HFS_ACK_CONTINUE: /* Continue to boot */ return 0; case ME_HFS_ACK_RESET: /* Non-power cycle reset */ set_global_reset(0); - reset = 0x06; + reset |= 0x06; break; case ME_HFS_ACK_PWR_CYCLE: /* Power cycle reset */ set_global_reset(0); - reset = 0x0e; + reset |= 0x0e; break; case ME_HFS_ACK_GBL_RESET: /* Global reset */ set_global_reset(1); - reset = 0x0e; + reset |= 0x0e; break; case ME_HFS_ACK_S3: case ME_HFS_ACK_S4: |