diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2017-08-20 21:36:11 +0300 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2019-01-24 13:37:25 +0000 |
commit | 957511cd9235f0cabaf61d3ea275a9ed69d2dc45 (patch) | |
tree | 51ffe19558f223b4a6bceafa58d6c62d15703c96 /src/southbridge/intel/common/smbus.c | |
parent | 4c2ce72341c4e3baae27ec36706d00f8276c5ebe (diff) | |
download | coreboot-957511cd9235f0cabaf61d3ea275a9ed69d2dc45.tar.xz |
sb/intel/common: SMBus setup_command()
Implements the common parts of any SMBus transaction
with a stub to log and recover (TBD) from timeout
errors.
Bits in SMBHSTCTL register are no longer preserved
between transactions.
Change-Id: I7ce14d3e895c30d595a94ce29ce0dc8cf51eb453
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/21118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/southbridge/intel/common/smbus.c')
-rw-r--r-- | src/southbridge/intel/common/smbus.c | 177 |
1 files changed, 84 insertions, 93 deletions
diff --git a/src/southbridge/intel/common/smbus.c b/src/southbridge/intel/common/smbus.c index de4ff91cfd..b2a78c9fc1 100644 --- a/src/southbridge/intel/common/smbus.c +++ b/src/southbridge/intel/common/smbus.c @@ -53,6 +53,10 @@ #define SMBHSTSTS_INTR (1 << 1) #define SMBHSTSTS_HOST_BUSY (1 << 0) +/* For SMBXMITADD register. */ +#define XMIT_WRITE(dev) (((dev) << 1) | 0) +#define XMIT_READ(dev) (((dev) << 1) | 1) + #define SMBUS_TIMEOUT (10 * 1000 * 100) #define SMBUS_BLOCK_MAXLEN 32 @@ -61,31 +65,40 @@ static void smbus_delay(void) inb(0x80); } -static int smbus_wait_until_ready(u16 smbus_base) +static int recover_master(int smbus_base, int ret) { - unsigned int loops = SMBUS_TIMEOUT; - unsigned char byte; - do { - smbus_delay(); - if (--loops == 0) - break; - byte = inb(smbus_base + SMBHSTSTAT); - } while (byte & SMBHSTSTS_HOST_BUSY); - return loops ? 0 : -1; + /* TODO: Depending of the failure, drive KILL transaction + * or force soft reset on SMBus master controller. + */ + printk(BIOS_ERR, "SMBus: Fatal master timeout (%d)\n", ret); + return ret; } -static int smbus_wait_until_done(u16 smbus_base) +static int setup_command(unsigned int smbus_base, u8 ctrl, u8 xmitadd) { unsigned int loops = SMBUS_TIMEOUT; - unsigned char byte; + u8 host_busy; + do { smbus_delay(); - if (--loops == 0) - break; - byte = inb(smbus_base + SMBHSTSTAT); - } while ((byte & SMBHSTSTS_HOST_BUSY) - || (byte & ~(SMBHSTSTS_INUSE_STS | SMBHSTSTS_HOST_BUSY)) == 0); - return loops ? 0 : -1; + host_busy = inb(smbus_base + SMBHSTSTAT) & SMBHSTSTS_HOST_BUSY; + } while (--loops && host_busy); + + if (loops == 0) + return recover_master(smbus_base, + SMBUS_WAIT_UNTIL_READY_TIMEOUT); + + /* Clear any lingering errors, so the transaction will run. */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Set up transaction */ + /* Disable interrupts */ + outb(ctrl, (smbus_base + SMBHSTCTL)); + + /* Set the device I'm talking to. */ + outb(xmitadd, smbus_base + SMBXMITADD); + + return 0; } static int smbus_wait_until_active(u16 smbus_base) @@ -103,27 +116,34 @@ static int smbus_wait_until_active(u16 smbus_base) return loops ? 0 : -1; } +static int smbus_wait_until_done(u16 smbus_base) +{ + unsigned int loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while ((byte & SMBHSTSTS_HOST_BUSY) + || (byte & ~(SMBHSTSTS_INUSE_STS | SMBHSTSTS_HOST_BUSY)) == 0); + return loops ? 0 : -1; +} + int do_smbus_read_byte(unsigned int smbus_base, u8 device, unsigned int address) { + int ret; unsigned char status; unsigned char byte; - if (smbus_wait_until_ready(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; - /* Set up transaction */ - /* Disable interrupts */ - outb(inb(smbus_base + SMBHSTCTL) & ~SMBHSTCNT_INTREN, - smbus_base + SMBHSTCTL); - /* Set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD); + /* Set up for a byte data read. */ + ret = setup_command(smbus_base, I801_BYTE_DATA, XMIT_READ(device)); + if (ret < 0) + return ret; + /* Set the command/address... */ - outb(address & 0xff, smbus_base + SMBHSTCMD); - /* Set up for a byte data read */ - outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | I801_BYTE_DATA, - (smbus_base + SMBHSTCTL)); - /* Clear any lingering errors, so the transaction will run */ - outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + outb(address, smbus_base + SMBHSTCMD); /* Clear the data byte... */ outb(0, smbus_base + SMBHSTDAT0); @@ -156,25 +176,17 @@ int do_smbus_write_byte(unsigned int smbus_base, u8 device, unsigned int address, unsigned int data) { unsigned char status; + int ret; - if (smbus_wait_until_ready(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + /* Set up for a byte data write. */ + ret = setup_command(smbus_base, I801_BYTE_DATA, XMIT_WRITE(device)); + if (ret < 0) + return ret; - /* Set up transaction */ - /* Disable interrupts */ - outb(inb(smbus_base + SMBHSTCTL) & ~SMBHSTCNT_INTREN, - smbus_base + SMBHSTCTL); - /* Set the device I'm talking to */ - outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); /* Set the command/address... */ - outb(address & 0xff, smbus_base + SMBHSTCMD); - /* Set up for a byte data read */ - outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | I801_BYTE_DATA, - (smbus_base + SMBHSTCTL)); - /* Clear any lingering errors, so the transaction will run */ - outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + outb(address, smbus_base + SMBHSTCMD); - /* Clear the data byte... */ + /* Set the data byte... */ outb(data, smbus_base + SMBHSTDAT0); /* Start the command */ @@ -205,27 +217,19 @@ int do_smbus_block_read(unsigned int smbus_base, u8 device, u8 cmd, unsigned int max_bytes, u8 *buf) { u8 status; - int slave_bytes; + int ret, slave_bytes; int bytes_read = 0; unsigned int loops = SMBUS_TIMEOUT; - if (smbus_wait_until_ready(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; max_bytes = MIN(SMBUS_BLOCK_MAXLEN, max_bytes); - /* Set up transaction */ - /* Disable interrupts */ - outb(inb(smbus_base + SMBHSTCTL) & ~SMBHSTCNT_INTREN, - smbus_base + SMBHSTCTL); - /* Set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD); + /* Set up for a block data read. */ + ret = setup_command(smbus_base, I801_BLOCK_DATA, XMIT_READ(device)); + if (ret < 0) + return ret; + /* Set the command/address... */ - outb(cmd & 0xff, smbus_base + SMBHSTCMD); - /* Set up for a block data read */ - outb((inb(smbus_base + SMBHSTCTL) & 0xc3) | I801_BLOCK_DATA, - (smbus_base + SMBHSTCTL)); - /* Clear any lingering errors, so the transaction will run */ - outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + outb(cmd, smbus_base + SMBHSTCMD); /* Reset number of bytes to transfer so we notice later it * was really updated with the transaction. */ @@ -279,30 +283,21 @@ int do_smbus_block_write(unsigned int smbus_base, u8 device, u8 cmd, const unsigned int bytes, const u8 *buf) { u8 status; - int bytes_sent = 0; + int ret, bytes_sent = 0; unsigned int loops = SMBUS_TIMEOUT; if (bytes > SMBUS_BLOCK_MAXLEN) return SMBUS_ERROR; - if (smbus_wait_until_ready(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + /* Set up for a block data write. */ + ret = setup_command(smbus_base, I801_BLOCK_DATA, XMIT_WRITE(device)); + if (ret < 0) + return ret; - /* Set up transaction */ - /* Disable interrupts */ - outb(inb(smbus_base + SMBHSTCTL) & ~SMBHSTCNT_INTREN, - smbus_base + SMBHSTCTL); - /* Set the device I'm talking to */ - outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); /* Set the command/address... */ - outb(cmd & 0xff, smbus_base + SMBHSTCMD); - /* Set up for a block data write */ - outb((inb(smbus_base + SMBHSTCTL) & 0xc3) | I801_BLOCK_DATA, - (smbus_base + SMBHSTCTL)); - /* Clear any lingering errors, so the transaction will run */ - outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + outb(cmd, smbus_base + SMBHSTCMD); - /* set number of bytes to transfer */ + /* Set number of bytes to transfer. */ outb(bytes, smbus_base + SMBHSTDAT0); /* Send first byte from buffer, bytes_sent increments after @@ -354,27 +349,23 @@ int do_i2c_block_read(unsigned int smbus_base, u8 device, unsigned int offset, const unsigned int bytes, u8 *buf) { u8 status; - int bytes_read = 0; + int ret, bytes_read = 0; unsigned int loops = SMBUS_TIMEOUT; - if (smbus_wait_until_ready(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; - /* Set upp transaction */ - /* Disable interrupts */ - outb(inb(smbus_base + SMBHSTCTL) & SMBHSTCNT_INTREN, - smbus_base + SMBHSTCTL); - /* Set the device I'm talking to */ - outb((device & 0x7f) << 1, smbus_base + SMBXMITADD); + /* Set up for a i2c block data read. + * + * FIXME: Address parameter changes to XMIT_READ(device) with + * some revision of PCH. Presumably hardware revisions that + * do not have i2c block write support internally set LSB. + */ + ret = setup_command(smbus_base, I801_I2C_BLOCK_DATA, + XMIT_WRITE(device)); + if (ret < 0) + return ret; /* device offset */ outb(offset, smbus_base + SMBHSTDAT1); - /* Set up for a i2c block data read */ - outb((inb(smbus_base + SMBHSTCTL) & 0xc3) | I801_I2C_BLOCK_DATA, - (smbus_base + SMBHSTCTL)); - - /* Clear any lingering errors, so the transaction will run */ - outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); /* Start the command */ outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), smbus_base + SMBHSTCTL); |