diff options
author | stepan <stepan@coresystems.de> | 2010-12-08 05:42:47 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2010-12-08 05:42:47 +0000 |
commit | 836ae29ee325b1e3d28ff59468cc50913b1e24ce (patch) | |
tree | e2691a1e1ee1d795ffe7a99fb93778a9910044c2 /src/southbridge/intel/esb6300/lpc.c | |
parent | 1bc5ccac51d94cfb4f9666ecf2cac619d8dc80a6 (diff) | |
download | coreboot-836ae29ee325b1e3d28ff59468cc50913b1e24ce.tar.xz |
first round name simplification. drop the <component>_ prefix.
the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.
Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)
- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong
Signed-off-by: <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/intel/esb6300/lpc.c')
-rw-r--r-- | src/southbridge/intel/esb6300/lpc.c | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/src/southbridge/intel/esb6300/lpc.c b/src/southbridge/intel/esb6300/lpc.c new file mode 100644 index 0000000000..67bcadc961 --- /dev/null +++ b/src/southbridge/intel/esb6300/lpc.c @@ -0,0 +1,374 @@ +/* + * (C) 2004 Linux Networx + */ +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include "esb6300.h" + +#define ACPI_BAR 0x40 +#define GPIO_BAR 0x58 + +#define NMI_OFF 0 +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +#define SERIRQ_CNTL 0x64 +static void esb6300_enable_serial_irqs(device_t dev) +{ + /* set packet length and toggle silent mode bit */ + pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0 << 0)); + pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(0 << 6)|((21 - 17) << 2)|(0 << 0)); +} + +#define PCI_DMA_CFG 0x90 +static void esb6300_pci_dma_cfg(device_t dev) +{ + /* Set PCI DMA CFG to lpc I/F DMA */ + pci_write_config16(dev, PCI_DMA_CFG, 0xfcff); +} + +#define LPC_EN 0xe6 +static void esb6300_enable_lpc(device_t dev) +{ + /* lpc i/f enable */ + pci_write_config8(dev, LPC_EN, 0x0d); +} + +typedef struct southbridge_intel_esb6300_config config_t; + +static void set_esb6300_gpio_use_sel( + device_t dev, struct resource *res, config_t *config) +{ + uint32_t gpio_use_sel, gpio_use_sel2; + +// gpio_use_sel = 0x1B003100; +// gpio_use_sel2 = 0x03000000; + gpio_use_sel = 0x1BBC31C0; + gpio_use_sel2 = 0x03000FE1; +#if 0 + int i; + for(i = 0; i < 64; i++) { + int val; + switch(config->gpio[i] & ESB6300_GPIO_USE_MASK) { + case ESB6300_GPIO_USE_AS_NATIVE: val = 0; break; + case ESB6300_GPIO_USE_AS_GPIO: val = 1; break; + default: + continue; + } + /* The caller is responsible for not playing with unimplemented bits */ + if (i < 32) { + gpio_use_sel &= ~( 1 << i); + gpio_use_sel |= (val << i); + } else { + gpio_use_sel2 &= ~( 1 << (i - 32)); + gpio_use_sel2 |= (val << (i - 32)); + } + } +#endif + outl(gpio_use_sel, res->base + 0x00); + outl(gpio_use_sel2, res->base + 0x30); +} + +static void set_esb6300_gpio_direction( + device_t dev, struct resource *res, config_t *config) +{ + uint32_t gpio_io_sel, gpio_io_sel2; + +// gpio_io_sel = 0x0000ffff; +// gpio_io_sel2 = 0x00000000; + gpio_io_sel = 0x1900ffff; + gpio_io_sel2 = 0x00000fe1; +#if 0 + int i; + for(i = 0; i < 64; i++) { + int val; + switch(config->gpio[i] & ESB6300_GPIO_SEL_MASK) { + case ESB6300_GPIO_SEL_OUTPUT: val = 0; break; + case ESB6300_GPIO_SEL_INPUT: val = 1; break; + default: + continue; + } + /* The caller is responsible for not playing with unimplemented bits */ + if (i < 32) { + gpio_io_sel &= ~( 1 << i); + gpio_io_sel |= (val << i); + } else { + gpio_io_sel2 &= ~( 1 << (i - 32)); + gpio_io_sel2 |= (val << (i - 32)); + } + } +#endif + outl(gpio_io_sel, res->base + 0x04); + outl(gpio_io_sel2, res->base + 0x34); +} + +static void set_esb6300_gpio_level( + device_t dev, struct resource *res, config_t *config) +{ + uint32_t gpio_lvl, gpio_lvl2; + uint32_t gpio_blink; + +// gpio_lvl = 0x1b3f0000; +// gpio_blink = 0x00040000; +// gpio_lvl2 = 0x00000fff; + gpio_lvl = 0x19370000; + gpio_blink = 0x00000000; + gpio_lvl2 = 0x00000fff; +#if 0 + int i; + for(i = 0; i < 64; i++) { + int val, blink; + switch(config->gpio[i] & ESB6300_GPIO_LVL_MASK) { + case ESB6300_GPIO_LVL_LOW: val = 0; blink = 0; break; + case ESB6300_GPIO_LVL_HIGH: val = 1; blink = 0; break; + case ESB6300_GPIO_LVL_BLINK: val = 1; blink = 1; break; + default: + continue; + } + /* The caller is responsible for not playing with unimplemented bits */ + if (i < 32) { + gpio_lvl &= ~( 1 << i); + gpio_blink &= ~( 1 << i); + gpio_lvl |= ( val << i); + gpio_blink |= (blink << i); + } else { + gpio_lvl2 &= ~( 1 << (i - 32)); + gpio_lvl2 |= (val << (i - 32)); + } + } +#endif + outl(gpio_lvl, res->base + 0x0c); + outl(gpio_blink, res->base + 0x18); + outl(gpio_lvl2, res->base + 0x38); +} + +static void set_esb6300_gpio_inv( + device_t dev, struct resource *res, config_t *config) +{ + uint32_t gpio_inv; + + gpio_inv = 0x00003100; +#if 0 + int i; + for(i = 0; i < 32; i++) { + int val; + switch(config->gpio[i] & ESB6300_GPIO_INV_MASK) { + case ESB6300_GPIO_INV_OFF: val = 0; break; + case ESB6300_GPIO_INV_ON: val = 1; break; + default: + continue; + } + gpio_inv &= ~( 1 << i); + gpio_inv |= (val << i); + } +#endif + outl(gpio_inv, res->base + 0x2c); +} + +static void esb6300_pirq_init(device_t dev) +{ + config_t *config; + + /* Get the chip configuration */ + config = dev->chip_info; + + if(config->pirq_a_d) { + pci_write_config32(dev, 0x60, config->pirq_a_d); + } + if(config->pirq_e_h) { + pci_write_config32(dev, 0x68, config->pirq_e_h); + } +} + + +static void esb6300_gpio_init(device_t dev) +{ + struct resource *res; + config_t *config; + + /* Skip if I don't have any configuration */ + if (!dev->chip_info) { + return; + } + /* The programmer is responsible for ensuring + * a valid gpio configuration. + */ + + /* Get the chip configuration */ + config = dev->chip_info; + /* Find the GPIO bar */ + res = find_resource(dev, GPIO_BAR); + if (!res) { + return; + } + + /* Set the use selects */ + set_esb6300_gpio_use_sel(dev, res, config); + + /* Set the IO direction */ + set_esb6300_gpio_direction(dev, res, config); + + /* Setup the input inverters */ + set_esb6300_gpio_inv(dev, res, config); + + /* Set the value on the GPIO output pins */ + set_esb6300_gpio_level(dev, res, config); + +} + + +static void lpc_init(struct device *dev) +{ + uint8_t byte; + uint32_t value; + int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + + /* sata settings */ + pci_write_config32(dev, 0x58, 0x00001181); + + /* IO APIC initialization */ + value = pci_read_config32(dev, 0xd0); + value |= (1 << 8)|(1<<7); + value |= (6 << 0)|(1<<13)|(1<<11); + pci_write_config32(dev, 0xd0, value); + setup_ioapic(IO_APIC_ADDR, 0); // don't rename IO APIC ID + + /* disable reset timer */ + pci_write_config8(dev, 0xd4, 0x02); + + /* cmos ram 2nd 128 */ + pci_write_config8(dev, 0xd8, 0x04); + + /* comm 2 */ + pci_write_config8(dev, 0xe0, 0x10); + + /* fwh sellect */ + pci_write_config32(dev, 0xe8, 0x00112233); + + /* fwh decode */ + pci_write_config8(dev, 0xf0, 0x0f); + + /* av disable, sata controller */ + pci_write_config8(dev, 0xf2, 0xc0); + + /* undocumented */ + pci_write_config8(dev, 0xa0, 0x20); + pci_write_config8(dev, 0xad, 0x03); + pci_write_config8(dev, 0xbb, 0x09); + + /* apic1 rout */ + pci_write_config8(dev, 0xf4, 0x40); + + /* undocumented */ + pci_write_config8(dev, 0xa0, 0x20); + pci_write_config8(dev, 0xad, 0x03); + pci_write_config8(dev, 0xbb, 0x09); + + esb6300_enable_serial_irqs(dev); + + esb6300_pci_dma_cfg(dev); + + esb6300_enable_lpc(dev); + + get_option(&pwr_on, "power_on_after_fail"); + byte = pci_read_config8(dev, 0xa4); + byte &= 0xfe; + if (!pwr_on) { + byte |= 1; + } + pci_write_config8(dev, 0xa4, byte); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); + + /* Set up the PIRQ */ + esb6300_pirq_init(dev); + + /* Set the state of the gpio lines */ + esb6300_gpio_init(dev); + + /* Initialize the real time clock */ + rtc_init(0); + + /* Initialize isa dma */ + isa_dma_init(); +} + +static void esb6300_lpc_read_resources(device_t dev) +{ + struct resource *res; + + /* Get the normal pci resources of this device */ + pci_dev_read_resources(dev); + + /* Add the ACPI BAR */ + res = pci_get_resource(dev, ACPI_BAR); + + /* Add the GPIO BAR */ + res = pci_get_resource(dev, GPIO_BAR); + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = IO_APIC_ADDR; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void esb6300_lpc_enable_resources(device_t dev) +{ + uint8_t acpi_cntl, gpio_cntl; + + /* Enable the normal pci resources */ + pci_dev_enable_resources(dev); + + /* Enable the ACPI bar */ + acpi_cntl = pci_read_config8(dev, 0x44); + acpi_cntl |= (1 << 4); + pci_write_config8(dev, 0x44, acpi_cntl); + + /* Enable the GPIO bar */ + gpio_cntl = pci_read_config8(dev, 0x5c); + gpio_cntl |= (1 << 4); + pci_write_config8(dev, 0x5c, gpio_cntl); +} + +static struct pci_operations lops_pci = { + .set_subsystem = 0, +}; + +static struct device_operations lpc_ops = { + .read_resources = esb6300_lpc_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = esb6300_lpc_enable_resources, + .init = lpc_init, + .scan_bus = scan_static_bus, + .enable = esb6300_enable, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver lpc_driver __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_6300ESB_LPC, +}; |