This does the following:

cd coreboot/src/southbridge
svn mv i82801ca i82801cx
svn mv i82801dbm i82801dx
svn mv i82801er i82801ex
svn copy i82801xx i82801bx
svn mv i82801xx i82801ax

Plus, fixing up the filenames in these directories and the romstage.c and
Kconfig files of the mainboards using those drivers.
Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver.

There's a lot more to be done, like 
- adding device IDs for the ICH3 and newer drivers that have been kept in
  i82801xx so far
- drop the additional parts support from the ax and bx drivers.


Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Joseph Smith <joe@settoplinux.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 84 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c
new file mode 100644
index 0000000000..a3f7e7c9fd
--- /dev/null
+++ b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2005 Tyan Computer
+ * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801ax.h"
+
+static void usb_ehci_init(struct device *dev)
+{
+	/* TODO: Is any special init really needed? */
+	uint32_t cmd;
+
+	printk_debug("EHCI: Setting up controller.. ");
+	cmd = pci_read_config32(dev, PCI_COMMAND);
+	pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
+
+	printk_debug("done.\n");
+}
+
+static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
+				   unsigned device)
+{
+	uint8_t access_cntl;
+
+	access_cntl = pci_read_config8(dev, 0x80);
+
+	/* Enable writes to protected registers. */
+	pci_write_config8(dev, 0x80, access_cntl | 1);
+
+	/* Write the subsystem vendor and device ID. */
+	pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+			   ((device & 0xffff) << 16) | (vendor & 0xffff));
+
+	/* Restore protection. */
+	pci_write_config8(dev, 0x80, access_cntl);
+}
+
+static struct pci_operations lops_pci = {
+	.set_subsystem	= &usb_ehci_set_subsystem,
+};
+
+static struct device_operations usb_ehci_ops = {
+	.read_resources		= pci_dev_read_resources,
+	.set_resources		= pci_dev_set_resources,
+	.enable_resources	= pci_dev_enable_resources,
+	.init			= usb_ehci_init,
+	.scan_bus		= 0,
+	.enable			= i82801ax_enable,
+	.ops_pci		= &lops_pci,
+};
+
+/* 82801DB and 82801DBM */
+static const struct pci_driver i82801db_usb_ehci __pci_driver = {
+	.ops	= &usb_ehci_ops,
+	.vendor	= PCI_VENDOR_ID_INTEL,
+	.device	= 0x24cd,
+};
+
+/* 82801EB and 82801ER */
+static const struct pci_driver i82801ex_usb_ehci __pci_driver = {
+	.ops	= &usb_ehci_ops,
+	.vendor	= PCI_VENDOR_ID_INTEL,
+	.device	= 0x24dd,
+};