summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801ax
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2010-10-08 19:24:56 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2010-10-08 19:24:56 +0000
commitab06fb0caea2469fdf212a7655517a836a8dede6 (patch)
treeb218e0f043178726b4ac3cabdfe4ff78c2e6f65d /src/southbridge/intel/i82801ax
parent3b8db813809f3485ceaa77bf91595e64cc588d92 (diff)
downloadcoreboot-ab06fb0caea2469fdf212a7655517a836a8dede6.tar.xz
Round 2 of i82801AX fixes to get it into a usable shape.
- Remove left-overs from more generic code in i82801xx times, and fix register names as needed. - Simplify IDE init code (and save some ROM space too). - Simplify PIRQ code. - Use u8 et al instead of uint8_t everywhere. - Random other fixes. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/intel/i82801ax')
-rw-r--r--src/southbridge/intel/i82801ax/chip.h22
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax.c37
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax.h48
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_ac97.c3
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_early_smbus.c13
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_ide.c46
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_lpc.c84
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_pci.c17
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_smbus.c1
-rw-r--r--src/southbridge/intel/i82801ax/i82801ax_usb.c3
10 files changed, 97 insertions, 177 deletions
diff --git a/src/southbridge/intel/i82801ax/chip.h b/src/southbridge/intel/i82801ax/chip.h
index 0c164fd325..21b6f9fcf3 100644
--- a/src/southbridge/intel/i82801ax/chip.h
+++ b/src/southbridge/intel/i82801ax/chip.h
@@ -25,22 +25,16 @@
#ifndef SOUTHBRIDGE_INTEL_I82801AX_CHIP_H
#define SOUTHBRIDGE_INTEL_I82801AX_CHIP_H
+#include <stdint.h>
+
struct southbridge_intel_i82801ax_config {
- /**
- * Interrupt Routing configuration
- * If bit7 is 1, the interrupt is disabled.
- */
- uint8_t pirqa_routing;
- uint8_t pirqb_routing;
- uint8_t pirqc_routing;
- uint8_t pirqd_routing;
- uint8_t pirqe_routing;
- uint8_t pirqf_routing;
- uint8_t pirqg_routing;
- uint8_t pirqh_routing;
+ u8 pirqa_routing;
+ u8 pirqb_routing;
+ u8 pirqc_routing;
+ u8 pirqd_routing;
- uint8_t ide0_enable;
- uint8_t ide1_enable;
+ u8 ide0_enable;
+ u8 ide1_enable;
};
extern struct chip_operations southbridge_intel_i82801ax_ops;
diff --git a/src/southbridge/intel/i82801ax/i82801ax.c b/src/southbridge/intel/i82801ax/i82801ax.c
index ea4cda67eb..7f4c7317c2 100644
--- a/src/southbridge/intel/i82801ax/i82801ax.c
+++ b/src/southbridge/intel/i82801ax/i82801ax.c
@@ -27,38 +27,21 @@
void i82801ax_enable(device_t dev)
{
- unsigned int index = 0;
- uint16_t cur_disable_mask, new_disable_mask;
+ u16 reg16, index;
+ device_t lpc_dev;
- /* All 82801xx devices should be on bus 0. */
- unsigned int devfn = PCI_DEVFN(0x1f, 0); // LPC
- device_t lpc_dev = dev_find_slot(0, devfn); // 0
+ /* Search for the 82801AA/AB LPC device (D31:F0) on PCI bus 0. */
+ lpc_dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0));
if (!lpc_dev)
return;
- /* We're going to assume, perhaps incorrectly, that if a function
- * exists it can be disabled. Workarounds for ICH variants that don't
- * follow this should be done by checking the device ID.
- */
- if (PCI_SLOT(dev->path.pci.devfn) == 31) {
- index = PCI_FUNC(dev->path.pci.devfn);
- } else if (PCI_SLOT(dev->path.pci.devfn) == 29) {
- index = 8 + PCI_FUNC(dev->path.pci.devfn);
- }
+ index = PCI_FUNC(dev->path.pci.devfn);
- /* Function 0 is a bit of an exception. */
- if (index == 0) {
- index = 14;
- }
-
- cur_disable_mask = pci_read_config16(lpc_dev, FUNC_DIS);
- new_disable_mask = cur_disable_mask & ~(1 << index); /* Enable it. */
- if (!dev->enabled) {
- new_disable_mask |= (1 << index); /* Disable it, if desired. */
- }
- if (new_disable_mask != cur_disable_mask) {
- pci_write_config16(lpc_dev, FUNC_DIS, new_disable_mask);
- }
+ reg16 = pci_read_config16(lpc_dev, FUNC_DIS);
+ reg16 &= ~(1 << index); /* Enable device. */
+ if (!dev->enabled)
+ reg16 |= (1 << index); /* Disable device, if desired. */
+ pci_write_config16(lpc_dev, FUNC_DIS, reg16);
}
struct chip_operations southbridge_intel_i82801ax_ops = {
diff --git a/src/southbridge/intel/i82801ax/i82801ax.h b/src/southbridge/intel/i82801ax/i82801ax.h
index 2ead33f02a..585de6e3c4 100644
--- a/src/southbridge/intel/i82801ax/i82801ax.h
+++ b/src/southbridge/intel/i82801ax/i82801ax.h
@@ -26,37 +26,36 @@
extern void i82801ax_enable(device_t dev);
#endif
+#define SMBUS_IO_BASE 0x0f00
+#define PMBASE_ADDR 0x0400
+#define HPET_ADDR 0xfed00000
+
#define PCI_DMA_CFG 0x90
#define SERIRQ_CNTL 0x64
#define GEN_CNTL 0xd0
-#define GEN_STS 0xd4
+#define GEN_STA 0xd4
#define RTC_CONF 0xd8
#define GEN_PMCON_3 0xa4
#define PMBASE 0x40
-#define PMBASE_ADDR 0x0400 /* ACPI Base Address Register */
#define ACPI_CNTL 0x44
+#define ACPI_EN (1 << 4)
#define BIOS_CNTL 0x4E
-#define GPIO_BASE_ICH0_5 0x58 /* LPC GPIO Base Addr. Reg. (ICH0-ICH5) */
-#define GPIO_BASE_ICH6_9 0x48 /* LPC GPIO Base Address Register (ICH6-ICH9) */
-#define GPIO_CNTL_ICH0_5 0x5C /* LPC GPIO Control Register (ICH0-ICH5) */
-#define GPIO_CNTL_ICH6_9 0x4C /* LPC GPIO Control Register (ICH6-ICH9) */
+#define GPIO_BASE 0x58 /* GPIO Base Address Register */
+#define GPIO_CNTL 0x5C /* GPIO Control Register */
+#define GPIO_EN (1 << 4)
#define PIRQA_ROUT 0x60
#define PIRQB_ROUT 0x61
#define PIRQC_ROUT 0x62
#define PIRQD_ROUT 0x63
-#define PIRQE_ROUT 0x68
-#define PIRQF_ROUT 0x69
-#define PIRQG_ROUT 0x6A
-#define PIRQH_ROUT 0x6B
#define FUNC_DIS 0xF2
-#define COM_DEC 0xE0 /* LPC I/F Communication Port Decode Ranges (ICH0-ICH5) */
-#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register (ICH6-ICH9) */
-#define LPC_EN_ICH0_5 0xE6 /* LPC IF Enables Register (ICH0-ICH5) */
-#define LPC_EN_ICH6_9 0x82 /* LPC IF Enables Register (ICH6-ICH9) */
+#define COM_DEC 0xE0 /* LPC I/F Comm. Port Decode Ranges */
+#define LPC_EN 0xE6 /* LPC IF Enables */
+
+// TODO: FDC_DEC etc.
#define SBUS_NUM 0x19
#define SUB_BUS_NUM 0x1A
@@ -77,14 +76,14 @@ extern void i82801ax_enable(device_t dev);
#define RTC_POWER_FAILED (1 << 1)
#define SLEEP_AFTER_POWER_FAIL (1 << 0)
-/* PCI Configuration Space (D31:F1) */
+/* IDE Timing registers (IDE_TIM) */
#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
/* IDE_TIM bits */
#define IDE_DECODE_ENABLE (1 << 15)
-/* PCI Configuration Space (D31:F3) */
+/* SMBus */
#define SMB_BASE 0x20
#define HOSTC 0x40
@@ -93,13 +92,7 @@ extern void i82801ax_enable(device_t dev);
#define SMB_SMI_EN (1 << 1)
#define HST_EN (1 << 0)
-/* SMBus I/O bits.
- * TODO: Does it matter where we put the SMBus IO base, as long as we keep
- * consistent and don't interfere with anything else?
- */
-/* #define SMBUS_IO_BASE 0x1000 */
-#define SMBUS_IO_BASE 0x0f00
-
+/* SMBus I/O registers. */
#define SMBHSTSTAT 0x0
#define SMBHSTCTL 0x2
#define SMBHSTCMD 0x3
@@ -107,14 +100,7 @@ extern void i82801ax_enable(device_t dev);
#define SMBHSTDAT0 0x5
#define SMBHSTDAT1 0x6
#define SMBBLKDAT 0x7
-#define SMBTRNSADD 0x9
-#define SMBSLVDATA 0xa
-#define SMLINK_PIN_CTL 0xe
-#define SMBUS_PIN_CTL 0xf
#define SMBUS_TIMEOUT (10 * 1000 * 100)
-/* HPET, if present */
-#define HPET_ADDR 0xfed00000
-
-#endif /* SOUTHBRIDGE_INTEL_I82801AX_I82801AX_H */
+#endif
diff --git a/src/southbridge/intel/i82801ax/i82801ax_ac97.c b/src/southbridge/intel/i82801ax/i82801ax_ac97.c
index 91f72fe8f7..826264bbfe 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_ac97.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_ac97.c
@@ -19,8 +19,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* This code should work for all ICH* southbridges with AC97 audio/modem. */
-
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
@@ -61,4 +59,3 @@ static const struct pci_driver i82801ab_ac97_modem __pci_driver = {
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_82801AB_AC97_MODEM,
};
-
diff --git a/src/southbridge/intel/i82801ax/i82801ax_early_smbus.c b/src/southbridge/intel/i82801ax/i82801ax_early_smbus.c
index d313613cea..e51e6afb6a 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_early_smbus.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_early_smbus.c
@@ -27,21 +27,10 @@
static void enable_smbus(void)
{
device_t dev;
- uint16_t device_id;
- /* Set the SMBus device statically. */
+ /* Set the SMBus device statically (D31:F3). */
dev = PCI_DEV(0x0, 0x1f, 0x3);
- /* Check to make sure we've got the right device. */
- device_id = pci_read_config16(dev, 0x2);
-
- /* Clear bits 7-4 (the only bits that vary between models). */
- device_id &= 0xff0f;
-
- if (device_id != 0x2403) {
- die("Device not found, Corey probably screwed up!");
- }
-
/* Set SMBus I/O base. */
pci_write_config32(dev, SMB_BASE,
SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
diff --git a/src/southbridge/intel/i82801ax/i82801ax_ide.c b/src/southbridge/intel/i82801ax/i82801ax_ide.c
index 04a7a12a48..98bc542d07 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_ide.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_ide.c
@@ -31,33 +31,24 @@ typedef struct southbridge_intel_i82801ax_config config_t;
static void ide_init(struct device *dev)
{
- /* Get the chip configuration */
- config_t *config = dev->chip_info;
+ u16 reg16;
+ config_t *conf = dev->chip_info;
- /* Enable IDE devices so the Linux IDE driver will work. */
- uint16_t ideTimingConfig;
+ reg16 = pci_read_config16(dev, IDE_TIM_PRI);
+ reg16 &= ~IDE_DECODE_ENABLE;
+ if (!conf || conf->ide0_enable)
+ reg16 |= IDE_DECODE_ENABLE;
+ printk(BIOS_DEBUG, "IDE: %s: %s\n", "Primary IDE interface",
+ conf->ide0_enable ? "on" : "off");
+ pci_write_config16(dev, IDE_TIM_PRI, reg16);
- ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI);
- ideTimingConfig &= ~IDE_DECODE_ENABLE;
- if (!config || config->ide0_enable) {
- /* Enable primary IDE interface. */
- ideTimingConfig |= IDE_DECODE_ENABLE;
- printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n");
- } else {
- printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n");
- }
- pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig);
-
- ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC);
- ideTimingConfig &= ~IDE_DECODE_ENABLE;
- if (!config || config->ide1_enable) {
- /* Enable secondary IDE interface. */
- ideTimingConfig |= IDE_DECODE_ENABLE;
- printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n");
- } else {
- printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n");
- }
- pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig);
+ reg16 = pci_read_config16(dev, IDE_TIM_SEC);
+ reg16 &= ~IDE_DECODE_ENABLE;
+ if (!conf || conf->ide1_enable)
+ reg16 |= IDE_DECODE_ENABLE;
+ printk(BIOS_DEBUG, "IDE: %s: %s\n", "Primary IDE interface",
+ conf->ide0_enable ? "on" : "off");
+ pci_write_config16(dev, IDE_TIM_SEC, reg16);
}
static struct device_operations ide_ops = {
@@ -69,17 +60,16 @@ static struct device_operations ide_ops = {
.enable = i82801ax_enable,
};
-/* 82801AA */
+/* 82801AA (ICH) */
static const struct pci_driver i82801aa_ide __pci_driver = {
.ops = &ide_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2411,
};
-/* 82801AB */
+/* 82801AB (ICH0) */
static const struct pci_driver i82801ab_ide __pci_driver = {
.ops = &ide_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2421,
};
-
diff --git a/src/southbridge/intel/i82801ax/i82801ax_lpc.c b/src/southbridge/intel/i82801ax/i82801ax_lpc.c
index a988bb027d..2d03ae870e 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_lpc.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_lpc.c
@@ -36,7 +36,7 @@
typedef struct southbridge_intel_i82801ax_config config_t;
-/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+/* PIRQ[n]_ROUT[3:0] - IRQ Routing (ISA compatible)
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
@@ -53,8 +53,10 @@ typedef struct southbridge_intel_i82801ax_config config_t;
* 0x0D - 1101 = Reserved
* 0x0E - 1110 = IRQ14
* 0x0F - 1111 = IRQ15
- * PIRQ[n]_ROUT[7] - PIRQ Routing Control
- * 0x80 - The PIRQ is not routed.
+ *
+ * PIRQ[n]_ROUT[7] - Interrupt Routing Enable (IRQEN)
+ * 0 - The PIRQ is routed to the ISA-compatible interrupt specified above.
+ * 1 - The PIRQ is not routed to the 8259.
*/
#define PIRQA 0x03
@@ -66,25 +68,24 @@ typedef struct southbridge_intel_i82801ax_config config_t;
* Use 0x0ef8 for a bitmap to cover all these IRQ's.
* Use the defined IRQ values above or set mainboard
* specific IRQ values in your mainboards Config.lb.
-*/
-
+ */
static void i82801ax_enable_apic(struct device *dev)
{
- uint32_t reg32;
- volatile uint32_t *ioapic_index = (volatile uint32_t *)0xfec00000;
- volatile uint32_t *ioapic_data = (volatile uint32_t *)0xfec00010;
+ u32 reg32;
+ volatile u32 *ioapic_index = (volatile u32 *)0xfec00000;
+ volatile u32 *ioapic_data = (volatile u32 *)0xfec00010;
/* Set ACPI base address (I/O space). */
pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1));
- /* Enable ACPI I/O and power management. */
- pci_write_config8(dev, ACPI_CNTL, 0x10);
+ /* Enable ACPI I/O range decode and ACPI power management. */
+ pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
reg32 = pci_read_config32(dev, GEN_CNTL);
- reg32 |= (3 << 7); /* Enable IOAPIC */
- reg32 |= (1 << 13); /* Coprocessor error enable */
- reg32 |= (1 << 1); /* Delayed transaction enable */
- reg32 |= (1 << 2); /* DMA collection buffer enable */
+ reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */
+ reg32 |= (3 << 7); /* IOAPIC enable (APIC_EN) */
+ reg32 |= (1 << 2); /* DMA collection buffer enable (DCB_EN) */
+ reg32 |= (1 << 1); /* Delayed transaction enable (DTE) */
pci_write_config32(dev, GEN_CNTL, reg32);
printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32);
@@ -112,34 +113,22 @@ static void i82801ax_enable_serial_irqs(struct device *dev)
/* TODO: Explain/#define the real meaning of these magic numbers. */
}
-static void i82801ax_pirq_init(device_t dev, uint16_t ich_model)
+static void i82801ax_pirq_init(device_t dev)
{
- /* Get the chip configuration */
+ u8 reg8;
config_t *config = dev->chip_info;
- if (config->pirqa_routing) {
- pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
- } else {
- pci_write_config8(dev, PIRQA_ROUT, PIRQA);
- }
+ reg8 = (config->pirqa_routing) ? config->pirqa_routing : PIRQA;
+ pci_write_config8(dev, PIRQA_ROUT, reg8);
- if (config->pirqb_routing) {
- pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
- } else {
- pci_write_config8(dev, PIRQB_ROUT, PIRQB);
- }
+ reg8 = (config->pirqb_routing) ? config->pirqb_routing : PIRQB;
+ pci_write_config8(dev, PIRQB_ROUT, reg8);
- if (config->pirqc_routing) {
- pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
- } else {
- pci_write_config8(dev, PIRQC_ROUT, PIRQC);
- }
+ reg8 = (config->pirqc_routing) ? config->pirqc_routing : PIRQC;
+ pci_write_config8(dev, PIRQC_ROUT, reg8);
- if (config->pirqd_routing) {
- pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
- } else {
- pci_write_config8(dev, PIRQD_ROUT, PIRQD);
- }
+ reg8 = (config->pirqd_routing) ? config->pirqd_routing : PIRQD;
+ pci_write_config8(dev, PIRQD_ROUT, reg8);
}
static void i82801ax_power_options(device_t dev)
@@ -172,10 +161,10 @@ static void i82801ax_power_options(device_t dev)
}
}
-static void gpio_init(device_t dev, uint16_t ich_model)
+static void gpio_init(device_t dev)
{
- pci_write_config32(dev, GPIO_BASE_ICH0_5, (GPIO_BASE_ADDR | 1));
- pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10);
+ pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1));
+ pci_write_config8(dev, GPIO_CNTL, GPIO_EN);
}
static void i82801ax_rtc_init(struct device *dev)
@@ -190,7 +179,7 @@ static void i82801ax_rtc_init(struct device *dev)
reg8 &= ~(1 << 1); /* Preserve the power fail state. */
pci_write_config8(dev, GEN_PMCON_3, reg8);
}
- reg32 = pci_read_config32(dev, GEN_STS);
+ reg32 = pci_read_config32(dev, GEN_STA);
rtc_failed |= reg32 & (1 << 2);
rtc_init(rtc_failed);
@@ -213,7 +202,7 @@ static void i82801ax_lpc_route_dma(struct device *dev, uint8_t mask)
pci_write_config16(dev, PCI_DMA_CFG, reg16);
}
-static void i82801ax_lpc_decode_en(device_t dev, uint16_t ich_model)
+static void i82801ax_lpc_decode_en(device_t dev)
{
/* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB.
* LPT decode defaults to 0x378-0x37F and 0x778-0x77F.
@@ -221,13 +210,11 @@ static void i82801ax_lpc_decode_en(device_t dev, uint16_t ich_model)
* We also need to set the value for LPC I/F Enables Register.
*/
pci_write_config8(dev, COM_DEC, 0x10);
- pci_write_config16(dev, LPC_EN_ICH0_5, 0x300F);
+ pci_write_config16(dev, LPC_EN, 0x300F);
}
static void lpc_init(struct device *dev)
{
- uint16_t ich_model = pci_read_config16(dev, PCI_DEVICE_ID);
-
/* Set the value for PCI command register. */
pci_write_config16(dev, PCI_COMMAND, 0x000f);
@@ -237,13 +224,13 @@ static void lpc_init(struct device *dev)
i82801ax_enable_serial_irqs(dev);
/* Setup the PIRQ. */
- i82801ax_pirq_init(dev, ich_model);
+ i82801ax_pirq_init(dev);
/* Setup power options. */
i82801ax_power_options(dev);
/* Set the state of the GPIO lines. */
- gpio_init(dev, ich_model);
+ gpio_init(dev);
/* Initialize the real time clock. */
i82801ax_rtc_init(dev);
@@ -255,7 +242,7 @@ static void lpc_init(struct device *dev)
isa_dma_init();
/* Setup decode ports and LPC I/F enables. */
- i82801ax_lpc_decode_en(dev, ich_model);
+ i82801ax_lpc_decode_en(dev);
}
static void i82801ax_lpc_read_resources(device_t dev)
@@ -293,15 +280,16 @@ static struct device_operations lpc_ops = {
.enable = i82801ax_enable,
};
+/* 82801AA (ICH) */
static const struct pci_driver i82801aa_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2410,
};
+/* 82801AB (ICH0) */
static const struct pci_driver i82801ab_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2420,
};
-
diff --git a/src/southbridge/intel/i82801ax/i82801ax_pci.c b/src/southbridge/intel/i82801ax/i82801ax_pci.c
index 32da3167f6..293ce582c2 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_pci.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_pci.c
@@ -26,16 +26,12 @@
static void pci_init(struct device *dev)
{
- uint16_t reg16;
+ u16 reg16;
- /* Clear system errors */
- reg16 = pci_read_config16(dev, 0x06);
- reg16 |= 0xf900; /* Clear possible errors */
- pci_write_config16(dev, 0x06, reg16);
-
- reg16 = pci_read_config16(dev, 0x1e);
- reg16 |= 0xf800; /* Clear possible errors */
- pci_write_config16(dev, 0x1e, reg16);
+ /* Clear possible errors. */
+ reg16 = pci_read_config16(dev, PCI_STATUS);
+ reg16 |= 0xf900;
+ pci_write_config16(dev, PCI_STATUS, reg16);
}
static struct device_operations pci_ops = {
@@ -46,15 +42,16 @@ static struct device_operations pci_ops = {
.scan_bus = pci_scan_bridge,
};
+/* 82801AA (ICH) */
static const struct pci_driver i82801aa_pci __pci_driver = {
.ops = &pci_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2418,
};
+/* 82801AB (ICH0) */
static const struct pci_driver i82801ab_pci __pci_driver = {
.ops = &pci_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2428,
};
-
diff --git a/src/southbridge/intel/i82801ax/i82801ax_smbus.c b/src/southbridge/intel/i82801ax/i82801ax_smbus.c
index af7c3e110d..8a3155f540 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_smbus.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_smbus.c
@@ -66,4 +66,3 @@ static const struct pci_driver i82801ab_smb __pci_driver = {
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_82801AB_SMB,
};
-
diff --git a/src/southbridge/intel/i82801ax/i82801ax_usb.c b/src/southbridge/intel/i82801ax/i82801ax_usb.c
index 649ab61ef4..78aadb0a3e 100644
--- a/src/southbridge/intel/i82801ax/i82801ax_usb.c
+++ b/src/southbridge/intel/i82801ax/i82801ax_usb.c
@@ -18,8 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* This code should work for all ICH* southbridges with USB. */
-
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
@@ -53,4 +51,3 @@ static const struct pci_driver i82801ab_usb1 __pci_driver = {
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_82801AB_USB,
};
-