This does the following:

cd coreboot/src/southbridge
svn mv i82801ca i82801cx
svn mv i82801dbm i82801dx
svn mv i82801er i82801ex
svn copy i82801xx i82801bx
svn mv i82801xx i82801ax

Plus, fixing up the filenames in these directories and the romstage.c and
Kconfig files of the mainboards using those drivers.
Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver.

There's a lot more to be done, like 
- adding device IDs for the ICH3 and newer drivers that have been kept in
  i82801xx so far
- drop the additional parts support from the ax and bx drivers.


Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Joseph Smith <joe@settoplinux.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 134 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801cx/i82801cx_early_smbus.c b/src/southbridge/intel/i82801cx/i82801cx_early_smbus.c
new file mode 100644
index 0000000000..9c3480283c
--- /dev/null
+++ b/src/southbridge/intel/i82801cx/i82801cx_early_smbus.c
@@ -0,0 +1,134 @@
+#include <device/pci_ids.h>
+#include "i82801cx.h"
+
+static void enable_smbus(void)
+{
+	device_t dev = PCI_DEV(0x0, 0x1f, 0x3);
+
+	print_debug("SMBus controller enabled\r\n");
+	/* set smbus iobase */
+	pci_write_config32(dev, SMB_BASE, SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+	/* Set smbus enable */
+	pci_write_config8(dev, HOSTC, HST_EN);
+	/* Set smbus iospace enable */ 
+	pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+	/* Disable interrupt generation */ 
+	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+	/* clear any lingering errors, so the transaction will run */
+	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+}
+
+
+static inline void smbus_delay(void)
+{
+	outb(0x80, 0x80);
+}
+
+// See http://www.coreboot.org/pipermail/linuxbios/2004-September/009077.html
+// for a description of this function.
+static int smbus_wait_until_active(void)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned char val;
+		smbus_delay();
+		val = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+		if ((val & 1)) {
+			break;
+		}
+	} while (--loops);
+	return loops ? 0 : -4;
+}
+
+static int smbus_wait_until_ready(void)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned char val;
+		smbus_delay();
+		val = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+		// !HOST_BUSY?
+		if ((val & 1) == 0) {
+			break;
+		}
+		if(loops == (SMBUS_TIMEOUT / 2)) {
+			// Clear status flags
+			outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), 
+				SMBUS_IO_BASE + SMBHSTSTAT);
+		}
+	} while(--loops);
+	return loops?0:-2;
+}
+
+static int smbus_wait_until_done(void)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned char val;
+		smbus_delay();
+		
+		val = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+		// !HOST_BUSY?
+		if ( (val & 1) == 0) {
+			break;
+		}
+		// BYTE_DONE or SUCCESS or error?
+		if ((val & ~((1<<6)|(1<<0)) ) != 0 ) {
+			break;
+		}
+	} while(--loops);
+	return loops?0:-3;
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+	unsigned char global_control_register;
+	unsigned char global_status_register;
+	unsigned char byte;
+
+	if (smbus_wait_until_ready() < 0) {
+		return -2;
+	}
+	
+	/* setup transaction */
+	/* disable interrupts */
+	outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xfe, SMBUS_IO_BASE + SMBHSTCTL);
+	/* set to read from the specified device  */
+	outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
+	/* set the command/address... */
+	outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+	/* set up for a byte data read */
+	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2<<2), SMBUS_IO_BASE + SMBHSTCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+	/* clear the data byte...*/
+	outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+	/* start a byte read, with interrupts disabled */
+	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
+	/* poll for it to start */
+	if (smbus_wait_until_active() < 0) {
+		return -4;
+	}
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done() < 0) {
+		return -3;
+	}
+
+	global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT) & ~(1<<6); /* Ignore the In Use Status... */
+
+	/* read results of transaction */
+	byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+
+	// SUCCESS?
+	if (global_status_register != 2) {
+		return -1;
+	}
+	return byte;
+}