summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801ex
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-02-27 01:50:21 +0000
committerStefan Reinauer <stepan@openbios.org>2010-02-27 01:50:21 +0000
commit138be8315b63b0c8955159580d085e7621882b95 (patch)
treeaabbcab390ea1e522524ff7e98d11ac752a051b5 /src/southbridge/intel/i82801ex
parentbe07eb29bc087a97903f72c2253442c285ce5942 (diff)
downloadcoreboot-138be8315b63b0c8955159580d085e7621882b95.tar.xz
This does the following:
cd coreboot/src/southbridge svn mv i82801ca i82801cx svn mv i82801dbm i82801dx svn mv i82801er i82801ex svn copy i82801xx i82801bx svn mv i82801xx i82801ax Plus, fixing up the filenames in these directories and the romstage.c and Kconfig files of the mainboards using those drivers. Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver. There's a lot more to be done, like - adding device IDs for the ICH3 and newer drivers that have been kept in i82801xx so far - drop the additional parts support from the ax and bx drivers. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/intel/i82801ex')
-rw-r--r--src/southbridge/intel/i82801ex/Kconfig3
-rw-r--r--src/southbridge/intel/i82801ex/Makefile.inc11
-rw-r--r--src/southbridge/intel/i82801ex/chip.h36
-rw-r--r--src/southbridge/intel/i82801ex/cmos_failover.c16
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex.c48
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex.h15
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_ac97.c37
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_early_smbus.c131
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_ehci.c50
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_ide.c43
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_lpc.c359
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_pci.c45
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_reset.c7
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_sata.c63
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_smbus.c45
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_smbus.h105
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_uhci.c56
-rw-r--r--src/southbridge/intel/i82801ex/i82801ex_watchdog.c28
18 files changed, 1098 insertions, 0 deletions
diff --git a/src/southbridge/intel/i82801ex/Kconfig b/src/southbridge/intel/i82801ex/Kconfig
new file mode 100644
index 0000000000..905af26235
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/Kconfig
@@ -0,0 +1,3 @@
+config SOUTHBRIDGE_INTEL_I82801EX
+ bool
+ select IOAPIC
diff --git a/src/southbridge/intel/i82801ex/Makefile.inc b/src/southbridge/intel/i82801ex/Makefile.inc
new file mode 100644
index 0000000000..66a217ba6a
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/Makefile.inc
@@ -0,0 +1,11 @@
+driver-y += i82801ex.o
+driver-y += i82801ex_uhci.o
+driver-y += i82801ex_lpc.o
+driver-y += i82801ex_ide.o
+driver-y += i82801ex_sata.o
+driver-y += i82801ex_ehci.o
+driver-y += i82801ex_smbus.o
+driver-y += i82801ex_pci.o
+driver-y += i82801ex_ac97.o
+obj-y += i82801ex_watchdog.o
+obj-y += i82801ex_reset.o
diff --git a/src/southbridge/intel/i82801ex/chip.h b/src/southbridge/intel/i82801ex/chip.h
new file mode 100644
index 0000000000..34a0a97ffd
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/chip.h
@@ -0,0 +1,36 @@
+#ifndef I82801EX_CHIP_H
+#define I82801EX_CHIP_H
+
+struct southbridge_intel_i82801ex_config
+{
+
+#define ICH5R_GPIO_USE_MASK 0x03
+#define ICH5R_GPIO_USE_DEFAULT 0x00
+#define ICH5R_GPIO_USE_AS_NATIVE 0x01
+#define ICH5R_GPIO_USE_AS_GPIO 0x02
+
+#define ICH5R_GPIO_SEL_MASK 0x0c
+#define ICH5R_GPIO_SEL_DEFAULT 0x00
+#define ICH5R_GPIO_SEL_OUTPUT 0x04
+#define ICH5R_GPIO_SEL_INPUT 0x08
+
+#define ICH5R_GPIO_LVL_MASK 0x30
+#define ICH5R_GPIO_LVL_DEFAULT 0x00
+#define ICH5R_GPIO_LVL_LOW 0x10
+#define ICH5R_GPIO_LVL_HIGH 0x20
+#define ICH5R_GPIO_LVL_BLINK 0x30
+
+#define ICH5R_GPIO_INV_MASK 0xc0
+#define ICH5R_GPIO_INV_DEFAULT 0x00
+#define ICH5R_GPIO_INV_OFF 0x40
+#define ICH5R_GPIO_INV_ON 0x80
+
+ /* GPIO use select */
+ unsigned char gpio[64];
+ unsigned int pirq_a_d;
+ unsigned int pirq_e_h;
+};
+extern struct chip_operations southbridge_intel_i82801ex_ops;
+
+#endif /* I82801EX_CHIP_H */
+
diff --git a/src/southbridge/intel/i82801ex/cmos_failover.c b/src/southbridge/intel/i82801ex/cmos_failover.c
new file mode 100644
index 0000000000..4821fad3d2
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/cmos_failover.c
@@ -0,0 +1,16 @@
+//kind of cmos_err for ich5
+#define RTC_FAILED (1 <<2)
+#define GEN_PMCON_3 0xa4
+static void check_cmos_failed(void)
+{
+
+ uint8_t byte;
+ byte = pci_read_config8(PCI_DEV(0,0x1f,0),GEN_PMCON_3);
+ if( byte & RTC_FAILED){
+//clear bit 1 and bit 2
+ byte = cmos_read(RTC_BOOT_BYTE);
+ byte &= 0x0c;
+ byte |= CONFIG_MAX_REBOOT_CNT << 4;
+ cmos_write(byte, RTC_BOOT_BYTE);
+ }
+}
diff --git a/src/southbridge/intel/i82801ex/i82801ex.c b/src/southbridge/intel/i82801ex/i82801ex.c
new file mode 100644
index 0000000000..bc5f04bf44
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex.c
@@ -0,0 +1,48 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801ex.h"
+
+void i82801ex_enable(device_t dev)
+{
+ device_t lpc_dev;
+ unsigned index = 0;
+ uint16_t reg_old, reg;
+
+ /* See if we are behind the i82801ex pci bridge */
+ lpc_dev = dev_find_slot(dev->bus->secondary, PCI_DEVFN(0x1f, 0));
+ if((dev->path.pci.devfn &0xf8)== 0xf8) {
+ index = dev->path.pci.devfn & 7;
+ }
+ else if((dev->path.pci.devfn &0xf8)== 0xe8) {
+ index = (dev->path.pci.devfn & 7) +8;
+ }
+ if ((!lpc_dev) || (index >= 16) || ((1<<index)&0x3091)) {
+ return;
+ }
+ if ((lpc_dev->vendor != PCI_VENDOR_ID_INTEL) ||
+ (lpc_dev->device != PCI_DEVICE_ID_INTEL_82801ER_LPC)) {
+ uint32_t id;
+ id = pci_read_config32(lpc_dev, PCI_VENDOR_ID);
+ if (id != (PCI_VENDOR_ID_INTEL |
+ (PCI_DEVICE_ID_INTEL_82801ER_LPC << 16))) {
+ return;
+ }
+ }
+
+ reg = reg_old = pci_read_config16(lpc_dev, 0xf2);
+ reg &= ~(1 << index);
+ if (!dev->enabled) {
+ reg |= (1 << index);
+ }
+ if (reg != reg_old) {
+ pci_write_config16(lpc_dev, 0xf2, reg);
+ }
+
+}
+
+struct chip_operations southbridge_intel_i82801ex_ops = {
+ CHIP_NAME("Intel ICH5 (82801Ex) Series Southbridge")
+ .enable_dev = i82801ex_enable,
+};
diff --git a/src/southbridge/intel/i82801ex/i82801ex.h b/src/southbridge/intel/i82801ex/i82801ex.h
new file mode 100644
index 0000000000..67fecdd57e
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex.h
@@ -0,0 +1,15 @@
+#ifndef I82801EX_H
+#define I82801EX_H
+
+#include "chip.h"
+
+extern void i82801ex_enable(device_t dev);
+
+#define PCI_DMA_CFG 0x90
+#define SERIRQ_CNTL 0x64
+#define GEN_CNTL 0xd0
+#define GEN_STS 0xd4
+#define RTC_CONF 0xd8
+#define GEN_PMCON_3 0xa4
+
+#endif /* I82801EX_H */
diff --git a/src/southbridge/intel/i82801ex/i82801ex_ac97.c b/src/southbridge/intel/i82801ex/i82801ex_ac97.c
new file mode 100644
index 0000000000..65502dd8cc
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_ac97.c
@@ -0,0 +1,37 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "i82801ex.h"
+
+static void ac97_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ /* Write the subsystem vendor and device id */
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = ac97_set_subsystem,
+};
+static struct device_operations ac97_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = 0,
+ .enable = i82801ex_enable,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver ac97_audio_driver __pci_driver = {
+ .ops = &ac97_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_AC97_AUDIO,
+};
+static const struct pci_driver ac97_modem_driver __pci_driver = {
+ .ops = &ac97_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_AC97_MODEM,
+};
diff --git a/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c b/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c
new file mode 100644
index 0000000000..c86bf23bb7
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c
@@ -0,0 +1,131 @@
+#include "i82801ex_smbus.h"
+
+#define SMBUS_IO_BASE 0x0f00
+
+static void enable_smbus(void)
+{
+ device_t dev = PCI_DEV(0x0, 0x1f, 0x3);
+
+ print_spew("SMBus controller enabled\r\n");
+
+ pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
+ print_debug_hex32(pci_read_config32(dev, 0x20));
+ /* Set smbus enable */
+ pci_write_config8(dev, 0x40, 1);
+ /* Set smbus iospace enable */
+ pci_write_config8(dev, 0x4, 1);
+ /* SMBALERT_DIS */
+ pci_write_config8(dev, 0x11, 4);
+
+ /* Disable interrupt generation */
+ outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+ return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+
+static void smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+{
+ if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
+ return;
+ }
+
+ print_debug("Unimplemented smbus_write_byte() called.\r\n");
+
+#if 0
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)),
+ SMBUS_IO_BASE + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data write */ /* FIXME */
+ outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x1), SMBUS_IO_BASE + SMBGCTL);
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
+
+ /* clear the data word...*/
+ outw(val, SMBUS_IO_BASE + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done(SMBUS_IO_BASE);
+#endif
+ return;
+}
+
+static int smbus_write_block(unsigned device, unsigned length, unsigned cmd,
+ unsigned data1, unsigned data2)
+{
+ unsigned char global_control_register;
+ unsigned char global_status_register;
+ unsigned char byte;
+ unsigned char stat;
+ int i;
+
+ /* chear the PM timeout flags, SECOND_TO_STS */
+ outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
+
+ if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
+ return -2;
+ }
+
+ /* setup transaction */
+ /* Obtain ownership */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ for(stat=0;(stat&0x40)==0;) {
+ stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+ /* clear the done bit */
+ outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
+
+ /* set the command address */
+ outb(cmd & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+
+ /* set the block length */
+ outb(length & 0xFF, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* try sending out the first byte of data here */
+ byte=(data1>>(0))&0x0ff;
+ outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
+ /* issue a block write command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x5 << 2) | 0x40,
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ for(i=0;i<length;i++) {
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) {
+ return -3;
+ }
+
+ /* load the next byte */
+ if(i>3)
+ byte=(data2>>(i%4))&0x0ff;
+ else
+ byte=(data1>>(i))&0x0ff;
+ outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
+
+ /* clear the done bit */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT),
+ SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+
+ print_debug("SMBUS Block complete\r\n");
+ return 0;
+}
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_ehci.c b/src/southbridge/intel/i82801ex/i82801ex_ehci.c
new file mode 100644
index 0000000000..60b1f304c2
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_ehci.c
@@ -0,0 +1,50 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "i82801ex.h"
+
+static void ehci_init(struct device *dev)
+{
+ uint32_t cmd;
+
+ printk_debug("EHCI: Setting up controller.. ");
+ cmd = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND,
+ cmd | PCI_COMMAND_MASTER);
+
+ printk_debug("done.\n");
+}
+
+static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ uint8_t access_cntl;
+ access_cntl = pci_read_config8(dev, 0x80);
+ /* Enable writes to protected registers */
+ pci_write_config8(dev, 0x80, access_cntl | 1);
+ /* Write the subsystem vendor and device id */
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ /* Restore protection */
+ pci_write_config8(dev, 0x80, access_cntl);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = &ehci_set_subsystem,
+};
+static struct device_operations ehci_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ehci_init,
+ .scan_bus = 0,
+ .enable = i82801ex_enable,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver ehci_driver __pci_driver = {
+ .ops = &ehci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_EHCI,
+};
diff --git a/src/southbridge/intel/i82801ex/i82801ex_ide.c b/src/southbridge/intel/i82801ex/i82801ex_ide.c
new file mode 100644
index 0000000000..b4d2311e0b
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_ide.c
@@ -0,0 +1,43 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "i82801ex.h"
+
+static void ide_init(struct device *dev)
+{
+ /* Enable IDE devices and timmings */
+ pci_write_config16(dev, 0x40, 0x0a307); // IDE0
+ pci_write_config16(dev, 0x42, 0x0a307); // IDE1
+ pci_write_config8(dev, 0x48, 0x05);
+ pci_write_config16(dev, 0x4a, 0x0101);
+ pci_write_config16(dev, 0x54, 0x5055);
+ printk_debug("IDE Enabled\n");
+}
+
+static void i82801ex_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ /* This value is also visible in uchi[0-2] and smbus functions */
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = i82801ex_ide_set_subsystem,
+};
+static struct device_operations ide_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ide_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver ide_driver __pci_driver = {
+ .ops = &ide_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_IDE,
+};
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_lpc.c b/src/southbridge/intel/i82801ex/i82801ex_lpc.c
new file mode 100644
index 0000000000..6cf8124c50
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_lpc.c
@@ -0,0 +1,359 @@
+/*
+ * (C) 2004 Linux Networx
+ */
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include "i82801ex.h"
+
+#define ACPI_BAR 0x40
+#define GPIO_BAR 0x58
+
+#define NMI_OFF 0
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+#define SERIRQ_CNTL 0x64
+static void i82801ex_enable_serial_irqs(device_t dev)
+{
+ /* set packet length and toggle silent mode bit */
+ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0 << 0));
+ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(0 << 6)|((21 - 17) << 2)|(0 << 0));
+}
+
+#define PCI_DMA_CFG 0x90
+static void i82801ex_pci_dma_cfg(device_t dev)
+{
+ /* Set PCI DMA CFG to lpc I/F DMA */
+ pci_write_config16(dev, PCI_DMA_CFG, 0xfcff);
+}
+
+#define LPC_EN 0xe6
+static void i82801ex_enable_lpc(device_t dev)
+{
+ /* lpc i/f enable */
+ pci_write_config8(dev, LPC_EN, 0x0d);
+}
+
+typedef struct southbridge_intel_i82801ex_config config_t;
+
+static void set_i82801ex_gpio_use_sel(
+ device_t dev, struct resource *res, config_t *config)
+{
+ uint32_t gpio_use_sel, gpio_use_sel2;
+ int i;
+
+ gpio_use_sel = 0x1A003180;
+ gpio_use_sel2 = 0x00000007;
+ for(i = 0; i < 64; i++) {
+ int val;
+ switch(config->gpio[i] & ICH5R_GPIO_USE_MASK) {
+ case ICH5R_GPIO_USE_AS_NATIVE: val = 0; break;
+ case ICH5R_GPIO_USE_AS_GPIO: val = 1; break;
+ default:
+ continue;
+ }
+ /* The caller is responsible for not playing with unimplemented bits */
+ if (i < 32) {
+ gpio_use_sel &= ~( 1 << i);
+ gpio_use_sel |= (val << i);
+ } else {
+ gpio_use_sel2 &= ~( 1 << (i - 32));
+ gpio_use_sel2 |= (val << (i - 32));
+ }
+ }
+ outl(gpio_use_sel, res->base + 0x00);
+ outl(gpio_use_sel2, res->base + 0x30);
+}
+
+static void set_i82801ex_gpio_direction(
+ device_t dev, struct resource *res, config_t *config)
+{
+ uint32_t gpio_io_sel, gpio_io_sel2;
+ int i;
+
+ gpio_io_sel = 0x0000ffff;
+ gpio_io_sel2 = 0x00000300;
+ for(i = 0; i < 64; i++) {
+ int val;
+ switch(config->gpio[i] & ICH5R_GPIO_SEL_MASK) {
+ case ICH5R_GPIO_SEL_OUTPUT: val = 0; break;
+ case ICH5R_GPIO_SEL_INPUT: val = 1; break;
+ default:
+ continue;
+ }
+ /* The caller is responsible for not playing with unimplemented bits */
+ if (i < 32) {
+ gpio_io_sel &= ~( 1 << i);
+ gpio_io_sel |= (val << i);
+ } else {
+ gpio_io_sel2 &= ~( 1 << (i - 32));
+ gpio_io_sel2 |= (val << (i - 32));
+ }
+ }
+ outl(gpio_io_sel, res->base + 0x04);
+ outl(gpio_io_sel2, res->base + 0x34);
+}
+
+static void set_i82801ex_gpio_level(
+ device_t dev, struct resource *res, config_t *config)
+{
+ uint32_t gpio_lvl, gpio_lvl2;
+ uint32_t gpio_blink;
+ int i;
+
+ gpio_lvl = 0x1b3f0000;
+ gpio_blink = 0x00040000;
+ gpio_lvl2 = 0x00030207;
+ for(i = 0; i < 64; i++) {
+ int val, blink;
+ switch(config->gpio[i] & ICH5R_GPIO_LVL_MASK) {
+ case ICH5R_GPIO_LVL_LOW: val = 0; blink = 0; break;
+ case ICH5R_GPIO_LVL_HIGH: val = 1; blink = 0; break;
+ case ICH5R_GPIO_LVL_BLINK: val = 1; blink = 1; break;
+ default:
+ continue;
+ }
+ /* The caller is responsible for not playing with unimplemented bits */
+ if (i < 32) {
+ gpio_lvl &= ~( 1 << i);
+ gpio_blink &= ~( 1 << i);
+ gpio_lvl |= ( val << i);
+ gpio_blink |= (blink << i);
+ } else {
+ gpio_lvl2 &= ~( 1 << (i - 32));
+ gpio_lvl2 |= (val << (i - 32));
+ }
+ }
+ outl(gpio_lvl, res->base + 0x0c);
+ outl(gpio_blink, res->base + 0x18);
+ outl(gpio_lvl2, res->base + 0x38);
+}
+
+static void set_i82801ex_gpio_inv(
+ device_t dev, struct resource *res, config_t *config)
+{
+ uint32_t gpio_inv;
+ int i;
+
+ gpio_inv = 0x00000000;
+ for(i = 0; i < 32; i++) {
+ int val;
+ switch(config->gpio[i] & ICH5R_GPIO_INV_MASK) {
+ case ICH5R_GPIO_INV_OFF: val = 0; break;
+ case ICH5R_GPIO_INV_ON: val = 1; break;
+ default:
+ continue;
+ }
+ gpio_inv &= ~( 1 << i);
+ gpio_inv |= (val << i);
+ }
+ outl(gpio_inv, res->base + 0x2c);
+}
+
+static void i82801ex_pirq_init(device_t dev)
+{
+ config_t *config;
+
+ /* Get the chip configuration */
+ config = dev->chip_info;
+
+ if(config->pirq_a_d) {
+ pci_write_config32(dev, 0x60, config->pirq_a_d);
+ }
+ if(config->pirq_e_h) {
+ pci_write_config32(dev, 0x68, config->pirq_e_h);
+ }
+}
+
+
+static void i82801ex_gpio_init(device_t dev)
+{
+ struct resource *res;
+ config_t *config;
+
+ /* Skip if I don't have any configuration */
+ if (!dev->chip_info) {
+ return;
+ }
+ /* The programmer is responsible for ensuring
+ * a valid gpio configuration.
+ */
+
+ /* Get the chip configuration */
+ config = dev->chip_info;
+ /* Find the GPIO bar */
+ res = find_resource(dev, GPIO_BAR);
+ if (!res) {
+ return;
+ }
+
+ /* Set the use selects */
+ set_i82801ex_gpio_use_sel(dev, res, config);
+
+ /* Set the IO direction */
+ set_i82801ex_gpio_direction(dev, res, config);
+
+ /* Setup the input inverters */
+ set_i82801ex_gpio_inv(dev, res, config);
+
+ /* Set the value on the GPIO output pins */
+ set_i82801ex_gpio_level(dev, res, config);
+
+}
+
+static void enable_hpet(struct device *dev)
+{
+const unsigned long hpet_address = 0xfed0000;
+
+ uint32_t dword;
+ uint32_t code = (0 & 0x3);
+
+ dword = pci_read_config32(dev, GEN_CNTL);
+ dword |= (1 << 17); /* enable hpet */
+
+ /* Bits [16:15] Memory Address Range
+ * 00 FED0_0000h - FED0_03FFh
+ * 01 FED0_1000h - FED0_13FFh
+ * 10 FED0_2000h - FED0_23FFh
+ * 11 FED0_3000h - FED0_33FFh
+ */
+
+ dword &= ~(3 << 15); /* clear it */
+ dword |= (code<<15);
+
+ printk_debug("enabling HPET @0x%x\n", hpet_address | (code <<12) );
+}
+
+static void lpc_init(struct device *dev)
+{
+ uint8_t byte;
+ uint32_t value;
+ int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+
+ /* IO APIC initialization */
+ value = pci_read_config32(dev, 0xd0);
+ value |= (1 << 8)|(1<<7)|(1<<1);
+ pci_write_config32(dev, 0xd0, value);
+ value = pci_read_config32(dev, 0xd4);
+ value |= (1<<1);
+ pci_write_config32(dev, 0xd4, value);
+ setup_ioapic(IO_APIC_ADDR, 0); // Don't rename IO APIC ID.
+
+ i82801ex_enable_serial_irqs(dev);
+
+ i82801ex_pci_dma_cfg(dev);
+
+ i82801ex_enable_lpc(dev);
+
+ /* Clear SATA to non raid */
+ pci_write_config8(dev, 0xae, 0x00);
+
+ get_option(&pwr_on, "power_on_after_fail");
+ byte = pci_read_config8(dev, 0xa4);
+ byte &= 0xfe;
+ if (!pwr_on) {
+ byte |= 1;
+ }
+ pci_write_config8(dev, 0xa4, byte);
+ printk_info("set power %s after power fail\n", pwr_on?"on":"off");
+
+ /* Set up the PIRQ */
+ i82801ex_pirq_init(dev);
+
+ /* Set the state of the gpio lines */
+ i82801ex_gpio_init(dev);
+
+ /* Initialize the real time clock */
+ rtc_init(0);
+
+ /* Initialize isa dma */
+ isa_dma_init();
+
+ /* Disable IDE (needed when sata is enabled) */
+ pci_write_config8(dev, 0xf2, 0x60);
+
+ enable_hpet(dev);
+}
+
+static void i82801ex_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal PCI resources of this device. */
+ pci_dev_read_resources(dev);
+
+ /* Add the ACPI BAR */
+ res = pci_get_resource(dev, ACPI_BAR);
+
+ /* Add the GPIO BAR */
+ res = pci_get_resource(dev, GPIO_BAR);
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->base = 0;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->base = 0xff800000;
+ res->size = 0x00800000; /* 8 MB for flash */
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, 3); /* IOAPIC */
+ res->base = 0xfec00000;
+ res->size = 0x00001000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void i82801ex_lpc_enable_resources(device_t dev)
+{
+ uint8_t acpi_cntl, gpio_cntl;
+
+ /* Enable the normal pci resources */
+ pci_dev_enable_resources(dev);
+
+ /* Enable the ACPI bar */
+ acpi_cntl = pci_read_config8(dev, 0x44);
+ acpi_cntl |= (1 << 4);
+ pci_write_config8(dev, 0x44, acpi_cntl);
+
+ /* Enable the GPIO bar */
+ gpio_cntl = pci_read_config8(dev, 0x5c);
+ gpio_cntl |= (1 << 4);
+ pci_write_config8(dev, 0x5c, gpio_cntl);
+
+ enable_childrens_resources(dev);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations lpc_ops = {
+ .read_resources = i82801ex_lpc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = i82801ex_lpc_enable_resources,
+ .init = lpc_init,
+ .scan_bus = scan_static_bus,
+ .enable = i82801ex_enable,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver lpc_driver __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_LPC,
+};
diff --git a/src/southbridge/intel/i82801ex/i82801ex_pci.c b/src/southbridge/intel/i82801ex/i82801ex_pci.c
new file mode 100644
index 0000000000..650628b5e5
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_pci.c
@@ -0,0 +1,45 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "i82801ex.h"
+
+static void pci_init(struct device *dev)
+{
+ uint32_t dword;
+ uint16_t word;
+
+ /* Clear system errors */
+ word = pci_read_config16(dev, 0x06);
+ word |= 0xf900; /* Clear possible errors */
+ pci_write_config16(dev, 0x06, word);
+
+#if 0
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1<<8); /* SERR# Enable */
+ dword |= (1<<6); /* Parity Error Response */
+ pci_write_config32(dev, 0x04, dword);
+#endif
+
+ word = pci_read_config16(dev, 0x1e);
+ word |= 0xf800; /* Clear possible errors */
+ pci_write_config16(dev, 0x1e, word);
+}
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .ops_pci = 0,
+};
+
+static const struct pci_driver pci_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_PCI,
+};
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_reset.c b/src/southbridge/intel/i82801ex/i82801ex_reset.c
new file mode 100644
index 0000000000..a1d92a7cc1
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_reset.c
@@ -0,0 +1,7 @@
+#include <arch/io.h>
+
+void i82801ex_hard_reset(void)
+{
+ /* Try rebooting through port 0xcf9 */
+ outb((0 <<3)|(1<<2)|(1<<1), 0xcf9);
+}
diff --git a/src/southbridge/intel/i82801ex/i82801ex_sata.c b/src/southbridge/intel/i82801ex/i82801ex_sata.c
new file mode 100644
index 0000000000..98431edc78
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_sata.c
@@ -0,0 +1,63 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "i82801ex.h"
+
+static void sata_init(struct device *dev)
+{
+
+ uint16_t word;
+
+ printk_debug("SATA init\n");
+ /* SATA configuration */
+ pci_write_config8(dev, 0x04, 0x07);
+ pci_write_config8(dev, 0x09, 0x8f);
+
+ /* Set timmings */
+ pci_write_config16(dev, 0x40, 0x0a307);
+ pci_write_config16(dev, 0x42, 0x0a307);
+
+ /* Sync DMA */
+ pci_write_config16(dev, 0x48, 0x000f);
+ pci_write_config16(dev, 0x4a, 0x1111);
+
+ /* 66 mhz */
+ pci_write_config16(dev, 0x54, 0xf00f);
+
+ /* Combine ide - sata configuration */
+ pci_write_config8(dev, 0x90, 0x0);
+
+ /* port 0 & 1 enable */
+ pci_write_config8(dev, 0x92, 0x33);
+
+ /* initialize SATA */
+ pci_write_config16(dev, 0xa0, 0x0018);
+ pci_write_config32(dev, 0xa4, 0x00000264);
+ pci_write_config16(dev, 0xa0, 0x0040);
+ pci_write_config32(dev, 0xa4, 0x00220043);
+
+}
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sata_init,
+ .scan_bus = 0,
+ .ops_pci = 0,
+};
+
+static const struct pci_driver sata_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_SATA,
+};
+
+static const struct pci_driver sata_driver_nr __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801EB_SATA,
+};
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_smbus.c b/src/southbridge/intel/i82801ex/i82801ex_smbus.c
new file mode 100644
index 0000000000..adfbcb7cc9
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_smbus.c
@@ -0,0 +1,45 @@
+#include <device/device.h>
+#include <device/path.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <arch/io.h>
+#include "i82801ex.h"
+#include "i82801ex_smbus.h"
+
+static int lsmbus_read_byte(struct bus *bus, device_t dev, uint8_t address)
+{
+ unsigned device;
+ struct resource *res;
+
+ device = dev->path.i2c.device;
+ res = find_resource(bus->dev, 0x20);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static struct smbus_bus_operations lops_smbus_bus = {
+ .read_byte = lsmbus_read_byte,
+};
+static struct pci_operations lops_pci = {
+ /* The subsystem id follows the ide controller */
+ .set_subsystem = 0,
+};
+static struct device_operations smbus_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = scan_static_bus,
+ .enable = i82801ex_enable,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+
+static const struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_SMB,
+};
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_smbus.h b/src/southbridge/intel/i82801ex/i82801ex_smbus.h
new file mode 100644
index 0000000000..861230e130
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_smbus.h
@@ -0,0 +1,105 @@
+#include <device/smbus_def.h>
+
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+#define SMBUS_TIMEOUT (100*1000*10)
+
+
+static void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_io_base + SMBHSTSTAT);
+ } while(byte & 1);
+ return loops?0:-1;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_io_base + SMBHSTSTAT);
+ } while((byte & 1) || (byte & ~((1<<6)|(1<<0))) == 0);
+ return loops?0:-1;
+}
+
+static int smbus_wait_until_blk_done(unsigned smbus_io_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_io_base + SMBHSTSTAT);
+ } while((byte&(1<<7)) == 0);
+ return loops?0:-1;
+}
+
+static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(smbus_io_base + SMBHSTCTL) & (~1), smbus_io_base + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBXMITADD);
+ /* set the command/address... */
+ outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(smbus_io_base + SMBHSTCTL) & 0xE3) | (0x2 << 2), smbus_io_base + SMBHSTCTL);
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_io_base + SMBHSTSTAT), smbus_io_base + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, smbus_io_base + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(smbus_io_base + SMBHSTCTL) | 0x40), smbus_io_base + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inb(smbus_io_base + SMBHSTSTAT);
+
+ /* Ignore the In Use Status... */
+ global_status_register &= ~(3 << 5);
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTDAT0);
+ if (global_status_register != (1 << 1)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_uhci.c b/src/southbridge/intel/i82801ex/i82801ex_uhci.c
new file mode 100644
index 0000000000..177b82089c
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_uhci.c
@@ -0,0 +1,56 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "i82801ex.h"
+
+static void uhci_init(struct device *dev)
+{
+ uint32_t cmd;
+
+#if 1
+ printk_debug("UHCI: Setting up controller.. ");
+ cmd = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND,
+ cmd | PCI_COMMAND_MASTER);
+
+
+ printk_debug("done.\n");
+#endif
+
+}
+
+static struct pci_operations lops_pci = {
+ /* The subsystem id follows the ide controller */
+ .set_subsystem = 0,
+};
+
+static struct device_operations uhci_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = uhci_init,
+ .scan_bus = 0,
+ .enable = i82801ex_enable,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver uhci_driver __pci_driver = {
+ .ops = &uhci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_USB1,
+};
+
+static const struct pci_driver usb2_driver __pci_driver = {
+ .ops = &uhci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_USB2,
+};
+
+static const struct pci_driver usb3_driver __pci_driver = {
+ .ops = &uhci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801ER_USB3,
+};
+
diff --git a/src/southbridge/intel/i82801ex/i82801ex_watchdog.c b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c
new file mode 100644
index 0000000000..c9c09f5896
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c
@@ -0,0 +1,28 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+
+void watchdog_off(void)
+{
+ device_t dev;
+ unsigned long value,base;
+
+ /* turn off the ICH5 watchdog */
+ dev = dev_find_slot(0, PCI_DEVFN(0x1f,0));
+ /* Enable I/O space */
+ value = pci_read_config16(dev, 0x04);
+ value |= (1 << 10);
+ pci_write_config16(dev, 0x04, value);
+ /* Get TCO base */
+ base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60;
+ /* Disable the watchdog timer */
+ value = inw(base + 0x08);
+ value |= 1 << 11;
+ outw(value, base + 0x08);
+ /* Clear TCO timeout status */
+ outw(0x0008, base + 0x04);
+ outw(0x0002, base + 0x06);
+ printk_debug("Watchdog ICH5 disabled\r\n");
+}
+