summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/lynxpoint/acpi
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2013-08-08 14:12:20 -0700
committerPatrick Georgi <patrick@georgi-clan.de>2013-12-21 23:55:02 +0100
commit9d1d7409686465f51bf6d940fc17f595e8d51f0e (patch)
treeff6c50f03b05966bd554ff48f0e1f52d73e56988 /src/southbridge/intel/lynxpoint/acpi
parent0bf1dea8d82efff46847d3a6b0f5dac5667b40fe (diff)
downloadcoreboot-9d1d7409686465f51bf6d940fc17f595e8d51f0e.tar.xz
lynxpoint: XHCI: Don't put device in D3 in _PS0 Method
The end of the _PS0 method that is supposed to transition the XHCI device to D0 state is instead putting it in D3 state. This triggers a PME_B0 GPE which causes a Notify to the XHCI ACPI Device in the kernel and that increments the wakeup counter and causes aborted suspends. Instead if we just leave the device in D0 where it should be after executing this function then the PME_B0 is not generated and the kernel does not see a wakeup on XHCI. Similarly I changed the _PS3 method to always put the device in D3 at the end of the method, rather than depending on the state to be D3 at the start. Before this change the kernel would see the following sequence when trying to suspend when the XHCI controller is in D3cold: kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff88017802bf28) kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [XHCI] (Device) Value 0x02 (Device Wake) Node ffff88017802bc30 kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [EHCI] (Device) Value 0x02 (Device Wake) Node ffff88017802b8e8 kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [HDEF] (Device) Value 0x02 (Device Wake) Node ffff88017802b1b8 kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 kernel: xhci_hcd 0000:00:14.0: PME# disabled kernel: xhci_hcd 0000:00:14.0: enabling bus mastering kernel: xhci_hcd 0000:00:14.0: setting latency timer to 64 kernel: PM: Wakeup pending, aborting suspend kernel: last active wakeup source: 0000:00:14.0 Now it does not get a notification (due to PME_B0) when going to D0 on the way into suspend. XHCI goes from D3cold to D0 (in order to be able to read mmio) and then back to D3hot before suspend. kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff88017802bf28) kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 kernel: xhci_hcd 0000:00:14.0: PME# disabled kernel: xhci_hcd 0000:00:14.0: enabling bus mastering kernel: xhci_hcd 0000:00:14.0: setting latency timer to 64 kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._S3D] (Node ffff88017802c000) kernel: xhci_hcd 0000:00:14.0: PME# enabled kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS3] (Node ffff88017802bf50) kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot Change-Id: Id5cd28eede2b27d97640047feb17349ae4ab79b7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65236 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4448 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src/southbridge/intel/lynxpoint/acpi')
-rw-r--r--src/southbridge/intel/lynxpoint/acpi/usb.asl9
1 files changed, 1 insertions, 8 deletions
diff --git a/src/southbridge/intel/lynxpoint/acpi/usb.asl b/src/southbridge/intel/lynxpoint/acpi/usb.asl
index 2fe67506b8..9c9b6b0b65 100644
--- a/src/southbridge/intel/lynxpoint/acpi/usb.asl
+++ b/src/southbridge/intel/lynxpoint/acpi/usb.asl
@@ -309,11 +309,6 @@ Device (XHCI)
Store (1, AX15)
}
- // Put device in D3 if it was there originally
- If (LEqual (Local0, 3)) {
- Store (3, ^D0D3)
- }
-
Return ()
}
@@ -371,9 +366,7 @@ Device (XHCI)
}
// Put device in D3
- If (LEqual (Local0, 3)) {
- Store (3, ^D0D3)
- }
+ Store (3, ^D0D3)
Return ()
}