lynxpoint me: add support for mbp clear wait in finalize step

The management engine is slow, requiring at least 500ms between
when the Dram Init Done message is sent (right after memory training)
to when the MBP will report that it is successfully cleared and
that the ME can finally be sent the EOP message.

Currently this is adding 100-150ms to the boot time.  If we defer
waiting for the MBP Clear indicator until the finalize step we
can gain back that lost time.

boot on falco with SMI debugging enabled to
ensure that the ME is locked down in the finalize step:

Finalizing Coreboot
SMI# #0
SMI_STS: PM1 APM
ME: MBP cleared
ME: mkhi_end_of_post
ME: END OF POST message successful (0)

Change-Id: Icab4c8c8e00eea67bed5e8154d91a1eb48a492d1
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4375
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>

1 files changed, 50 insertions, 31 deletions

diff --git a/src/southbridge/intel/lynxpoint/me_9.x.c b/src/southbridge/intel/lynxpoint/me_9.x.c
index 01eb8447c6..5aa74f015d 100644
--- a/src/southbridge/intel/lynxpoint/me_9.x.c
+++ b/src/southbridge/intel/lynxpoint/me_9.x.c
@@ -62,6 +62,7 @@ static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev);
 
 /* MMIO base address for MEI interface */
 static u32 mei_base_address;
+void intel_me_mbp_clear(device_t dev);
 
 #if CONFIG_DEBUG_INTEL_ME
 static void mei_dump(void *ptr, int dword, int offset, const char *type)
@@ -116,14 +117,12 @@ static inline void mei_write_dword_ptr(void *ptr, int offset)
 	mei_dump(ptr, dword, offset, "WRITE");
 }
 
-#ifndef __SMM__
 static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset)
 {
 	u32 dword = pci_read_config32(dev, offset);
 	memcpy(ptr, &dword, sizeof(dword));
 	mei_dump(ptr, dword, offset, "PCI READ");
 }
-#endif
 
 static inline void read_host_csr(struct mei_csr *csr)
 {
@@ -351,6 +350,47 @@ static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
 	return 0;
 }
 
+/*
+ * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read
+ * state machine on the BIOS end doesn't match the ME's state machine.
+ */
+static void intel_me_mbp_give_up(device_t dev)
+{
+	struct mei_csr csr;
+
+	pci_write_config32(dev, PCI_ME_H_GS2, PCI_ME_MBP_GIVE_UP);
+
+	read_host_csr(&csr);
+	csr.reset = 1;
+	csr.interrupt_generate = 1;
+	write_host_csr(&csr);
+}
+
+/*
+ * mbp clear routine. This will wait for the ME to indicate that
+ * the MBP has been read and cleared.
+ */
+void intel_me_mbp_clear(device_t dev)
+{
+	int count;
+	struct me_hfs2 hfs2;
+
+	/* Wait for the mbp_cleared indicator */
+	for (count = ME_RETRY; count > 0; --count) {
+		pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2);
+		if (hfs2.mbp_cleared)
+			break;
+		udelay(ME_DELAY);
+	}
+
+	if (count == 0) {
+		printk(BIOS_WARNING, "ME: Timeout waiting for mbp_cleared\n");
+		intel_me_mbp_give_up(dev);
+	} else {
+		printk(BIOS_INFO, "ME: MBP cleared\n");
+	}
+}
+
 #if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__)
 static inline void print_cap(const char *name, int state)
 {
@@ -497,6 +537,11 @@ void intel_me_finalize_smm(void)
 	if (!mei_base_address || mei_base_address == 0xfffffff0)
 		return;
 
+#if CONFIG_ME_MBP_CLEAR_LATE
+	/* Wait for ME MBP Cleared indicator */
+	intel_me_mbp_clear(PCH_ME_DEV);
+#endif
+
 	/* Make sure ME is in a mode that expects EOP */
 	reg32 = pci_read_config32(PCH_ME_DEV, PCI_ME_HFS);
 	memcpy(&hfs, &reg32, sizeof(u32));
@@ -798,23 +843,6 @@ static u32 host_to_me_words_room(void)
 }
 #endif
 
-/*
- * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read
- * state machine on the BIOS end doesn't match the ME's state machine.
- */
-static void intel_me_mbp_give_up(device_t dev)
-{
-	u32 reg32;
-	struct mei_csr csr;
-
-	reg32 = PCI_ME_MBP_GIVE_UP;
-	pci_write_config32(dev, PCI_ME_H_GS2, reg32);
-	read_host_csr(&csr);
-	csr.reset = 1;
-	csr.interrupt_generate = 1;
-	write_host_csr(&csr);
-}
-
 struct mbp_payload {
 	mbp_header header;
 	u32 data[0];
@@ -830,7 +858,6 @@ static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev)
 	u32 me2host_pending;
 	struct mei_csr host;
 	struct me_hfs2 hfs2;
-	int count;
 	struct mbp_payload *mbp;
 	int i;
 
@@ -876,18 +903,10 @@ static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev)
 	host.interrupt_generate = 1;
 	write_host_csr(&host);
 
+#if !CONFIG_ME_MBP_CLEAR_LATE
 	/* Wait for the mbp_cleared indicator. */
-	for (count = ME_RETRY; count > 0; --count) {
-		pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2);
-		if (hfs2.mbp_cleared)
-			break;
-		udelay(ME_DELAY);
-	}
-
-	if (count == 0) {
-		printk(BIOS_WARNING, "ME: Timeout waiting for mbp_cleared\n");
-		intel_me_mbp_give_up(dev);
-	}
+	intel_me_mbp_clear(dev);
+#endif
 
 	/* Dump out the MBP contents. */
 #if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)