HDA: Enable Mini-HDA and fix up PCH-HDA init

The SystemAgent contains a mini-hd audio controller at PCI 0:3.0
which uses the same verb table init sequence as the southbridge.

In order to avoid two copies of the verb table loading code I
separated out the HDA verb table functions into a file that can
be re-used and then added a minihd driver to the haswell northbridge.

The minihd verb table is the same across devices so it can live
within the minihd driver rather than needing to be specified in
each separate mainboard.

I also fixed up the driver for lynxpoint HDA by following the
reference code.

Without HDMI cable plugged in driver does not find any codec,
and it does not seem to re-probe when HDMI is connected.  We may
be missing kernel patches for this.

hda-intel 0000:00:03.0: no codecs found!

With a basic kernel patch to add 0x0a0c device ID to HDA driver
and with HDMI cable connected it is much happier:

snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11

Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4318
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

4 files changed, 365 insertions, 252 deletions

diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc
index 90419d65f6..92e1c0092e 100644
--- a/src/southbridge/intel/lynxpoint/Makefile.inc
+++ b/src/southbridge/intel/lynxpoint/Makefile.inc
@@ -33,6 +33,7 @@ ramstage-y += usb_ehci.c
 ramstage-y += usb_xhci.c
 ramstage-y += me_9.x.c
 ramstage-y += smbus.c
+ramstage-y += hda_verb.c
 ramstage-$(CONFIG_INTEL_LYNXPOINT_LP) += serialio.c
 
 ramstage-y += rcba.c
diff --git a/src/southbridge/intel/lynxpoint/azalia.c b/src/southbridge/intel/lynxpoint/azalia.c
index ee12042863..b63672ded3 100644
--- a/src/southbridge/intel/lynxpoint/azalia.c
+++ b/src/southbridge/intel/lynxpoint/azalia.c
@@ -27,240 +27,47 @@
 #include <arch/io.h>
 #include <delay.h>
 #include "pch.h"
-
-#define HDA_ICII_REG 0x68
-#define HDA_ICII_BUSY (1 << 0)
-#define HDA_ICII_VALID (1 << 1)
-
-typedef struct southbridge_intel_bd82x6x_config config_t;
-
-static int set_bits(u32 port, u32 mask, u32 val)
-{
-	u32 reg32;
-	int count;
-
-	/* Write (val & mask) to port */
-	val &= mask;
-	reg32 = read32(port);
-	reg32 &= ~mask;
-	reg32 |= val;
-	write32(port, reg32);
-
-	/* Wait for readback of register to
-	 * match what was just written to it
-	 */
-	count = 50;
-	do {
-		/* Wait 1ms based on BKDG wait time */
-		mdelay(1);
-		reg32 = read32(port);
-		reg32 &= mask;
-	} while ((reg32 != val) && --count);
-
-	/* Timeout occurred */
-	if (!count)
-		return -1;
-	return 0;
-}
-
-static int codec_detect(u32 base)
-{
-	u8 reg8;
-
-	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
-	if (set_bits(base + 0x08, 1, 1) == -1)
-		goto no_codec;
-
-	/* Write back the value once reset bit is set. */
-	write16(base + 0x0, read16(base + 0x0));
-
-	/* Read in Codec location (BAR + 0xe)[2..0]*/
-	reg8 = read8(base + 0xe);
-	reg8 &= 0x0f;
-	if (!reg8)
-		goto no_codec;
-
-	return reg8;
-
-no_codec:
-	/* Codec Not found */
-	/* Put HDA back in reset (BAR + 0x8) [0] */
-	set_bits(base + 0x08, 1, 0);
-	printk(BIOS_DEBUG, "Azalia: No codec!\n");
-	return 0;
-}
+#include "hda_verb.h"
 
 const u32 * cim_verb_data = NULL;
 u32 cim_verb_data_size = 0;
 const u32 * pc_beep_verbs = NULL;
 u32 pc_beep_verbs_size = 0;
 
-static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
-{
-	int idx=0;
-
-	while (idx < (cim_verb_data_size / sizeof(u32))) {
-		u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32
-		if (cim_verb_data[idx] != viddid) {
-			idx += verb_size + 3; // skip verb + header
-			continue;
-		}
-		*verb = &cim_verb_data[idx+3];
-		return verb_size;
-	}
-
-	/* Not all codecs need to load another verb */
-	return 0;
-}
-
-/**
- *  Wait 50usec for the codec to indicate it is ready
- *  no response would imply that the codec is non-operative
- */
-
-static int wait_for_ready(u32 base)
-{
-	/* Use a 50 usec timeout - the Linux kernel uses the
-	 * same duration */
-
-	int timeout = 50;
-
-	while(timeout--) {
-		u32 reg32 = read32(base +  HDA_ICII_REG);
-		if (!(reg32 & HDA_ICII_BUSY))
-			return 0;
-		udelay(1);
-	}
-
-	return -1;
-}
-
-/**
- *  Wait 50usec for the codec to indicate that it accepted
- *  the previous command.  No response would imply that the code
- *  is non-operative
- */
-
-static int wait_for_valid(u32 base)
-{
-	u32 reg32;
-
-	/* Send the verb to the codec */
-	reg32 = read32(base + HDA_ICII_REG);
-	reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
-	write32(base + HDA_ICII_REG, reg32);
-
-	/* Use a 50 usec timeout - the Linux kernel uses the
-	 * same duration */
-
-	int timeout = 50;
-	while(timeout--) {
-		reg32 = read32(base + HDA_ICII_REG);
-		if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
-			HDA_ICII_VALID)
-			return 0;
-		udelay(1);
-	}
-
-	return -1;
-}
-
-static void codec_init(struct device *dev, u32 base, int addr)
+static void codecs_init(u32 base, u32 codec_mask)
 {
-	u32 reg32;
-	const u32 *verb;
-	u32 verb_size;
 	int i;
 
-	printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
-
-	/* 1 */
-	if (wait_for_ready(base) == -1) {
-		printk(BIOS_DEBUG, "  codec not ready.\n");
-		return;
-	}
-
-	reg32 = (addr << 28) | 0x000f0000;
-	write32(base + 0x60, reg32);
-
-	if (wait_for_valid(base) == -1) {
-		printk(BIOS_DEBUG, "  codec not valid.\n");
-		return;
-	}
-
-	reg32 = read32(base + 0x64);
-
-	/* 2 */
-	printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
-	verb_size = find_verb(dev, reg32, &verb);
-
-	if (!verb_size) {
-		printk(BIOS_DEBUG, "Azalia: No verb!\n");
-		return;
-	}
-	printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
-
-	/* 3 */
-	for (i = 0; i < verb_size; i++) {
-		if (wait_for_ready(base) == -1)
-			return;
-
-		write32(base + 0x60, verb[i]);
-
-		if (wait_for_valid(base) == -1)
-			return;
-	}
-	printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
-}
-
-static void codecs_init(struct device *dev, u32 base, u32 codec_mask)
-{
-	int i;
+	/* Can support up to 4 codecs */
 	for (i = 3; i >= 0; i--) {
 		if (codec_mask & (1 << i))
-			codec_init(dev, base, i);
+			hda_codec_init(base, i,
+				       cim_verb_data_size,
+				       cim_verb_data);
 	}
 
-	for (i = 0; i < pc_beep_verbs_size; i++) {
-		if (wait_for_ready(base) == -1)
-			return;
-
-		write32(base + 0x60, pc_beep_verbs[i]);
-
-		if (wait_for_valid(base) == -1)
-			return;
-	}
+	if (pc_beep_verbs_size && pc_beep_verbs)
+		hda_codec_write(base, pc_beep_verbs_size, pc_beep_verbs);
 }
 
-static void azalia_init(struct device *dev)
+static void azalia_pch_init(struct device *dev, u32 base)
 {
-	u32 base;
-	struct resource *res;
-	u32 codec_mask;
 	u8 reg8;
 	u16 reg16;
 	u32 reg32;
 
-	/* Find base address */
-	res = find_resource(dev, PCI_BASE_ADDRESS_0);
-	if (!res)
-		return;
-
-	// NOTE this will break as soon as the Azalia get's a bar above
-	// 4G. Is there anything we can do about it?
-	base = (u32)res->base;
-	printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
-
 	if (RCBA32(0x2030) & (1 << 31)) {
 		reg32 = pci_read_config32(dev, 0x120);
 		reg32 &= 0xf8ffff01;
-		reg32 |= (1 << 24); // 25 for server
+		reg32 |= (1 << 25);
 		reg32 |= RCBA32(0x2030) & 0xfe;
 		pci_write_config32(dev, 0x120, reg32);
 
-		reg16 = pci_read_config16(dev, 0x78);
-		reg16 &= ~(1 << 11);
-		pci_write_config16(dev, 0x78, reg16);
+		if (!pch_is_lp()) {
+			reg16 = pci_read_config16(dev, 0x78);
+			reg16 &= ~(1 << 11);
+			pci_write_config16(dev, 0x78, reg16);
+		}
 	} else
 		printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
 
@@ -272,73 +79,87 @@ static void azalia_init(struct device *dev)
 	if (pci_read_config32(dev, 0x120) & ((1 << 24) |
 						(1 << 25) | (1 << 26))) {
 		reg32 = pci_read_config32(dev, 0x120);
-		reg32 |= (1 << 31);
+		if (pch_is_lp())
+			reg32 &= ~(1 << 31);
+		else
+			reg32 |= (1 << 31);
 		pci_write_config32(dev, 0x120, reg32);
 	}
 
-	// Enable HDMI codec:
-	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 1);
-	pci_write_config32(dev, 0xc4, reg32);
-
 	reg8 = pci_read_config8(dev, 0x43);
-	reg8 |= (1 << 5) | (1 << 6) | (1 << 2) | (1 << 1) | (1 << 0);
+	if (pch_is_lp())
+		reg8 &= ~(1 << 6);
+	else
+		reg8 |= (1 << 4);
 	pci_write_config8(dev, 0x43, reg8);
 
-	/* Additional programming steps */
-	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 13) | (1 << 10);
-	pci_write_config32(dev, 0xc4, reg32);
-
-	reg32 = pci_read_config32(dev, 0xd0);
-	reg32 &= ~(1 << 31);
-	pci_write_config32(dev, 0xd0, reg32);
+	if (!pch_is_lp()) {
+		reg32 = pci_read_config32(dev, 0xc0);
+		reg32 |= (1 << 17);
+		pci_write_config32(dev, 0xc0, reg32);
+	}
 
 	/* Additional programming steps */
 	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 13);
-	pci_write_config32(dev, 0xc4, reg32);
-
-	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 10);
+	if (pch_is_lp())
+		reg32 |= (1 << 24);
+	else
+		reg32 |= (1 << 14);
 	pci_write_config32(dev, 0xc4, reg32);
 
-	reg32 = pci_read_config32(dev, 0xd0);
-	reg32 &= ~(1 << 31);
-	pci_write_config32(dev, 0xd0, reg32);
-
-	/* Set Bus Master */
-	reg32 = pci_read_config32(dev, PCI_COMMAND);
-	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
-
-	pci_write_config8(dev, 0x3c, 0x0a); // unused?
-
-	/* Codec Initialization Programming Sequence */
-	reg32 = read32(base + 0x08);
-	reg32 |= (1 << 0);
-	write32(base + 0x08, reg32);
+	if (!pch_is_lp()) {
+		reg32 = pci_read_config32(dev, 0xd0);
+		reg32 &= ~(1 << 31);
+		pci_write_config32(dev, 0xd0, reg32);
+	}
 
-	//
 	reg8 = pci_read_config8(dev, 0x40); // Audio Control
-	reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb
+	reg8 |= 1; // Select Azalia mode
 	pci_write_config8(dev, 0x40, reg8);
 
 	reg8 = pci_read_config8(dev, 0x4d); // Docking Status
 	reg8 &= ~(1 << 7); // Docking not supported
 	pci_write_config8(dev, 0x4d, reg8);
 
-	codec_mask = codec_detect(base);
+	if (pch_is_lp()) {
+		reg16 = read32(base + 0x0012);
+		reg16 |= (1 << 0);
+		write32(base + 0x0012, reg16);
+
+		/* disable Auto Voltage Detector */
+		reg8 = pci_read_config8(dev, 0x42);
+		reg8 |= (1 << 2);
+		pci_write_config8(dev, 0x42, reg8);
+	}
+}
+
+static void azalia_init(struct device *dev)
+{
+	u32 base;
+	struct resource *res;
+	u32 codec_mask;
+	u32 reg32;
+
+	/* Find base address */
+	res = find_resource(dev, PCI_BASE_ADDRESS_0);
+	if (!res)
+		return;
+
+	base = (u32)res->base;
+	printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
+
+	/* Set Bus Master */
+	reg32 = pci_read_config32(dev, PCI_COMMAND);
+	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+	azalia_pch_init(dev, base);
+
+	codec_mask = hda_codec_detect(base);
 
 	if (codec_mask) {
 		printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
-		codecs_init(dev, base, codec_mask);
+		codecs_init(base, codec_mask);
 	}
-
-	/* Enable dynamic clock gating */
-	reg8 = pci_read_config8(dev, 0x43);
-	reg8 &= ~0x7;
-	reg8 |= (1 << 2) | (1 << 0);
-	pci_write_config8(dev, 0x43, reg8);
 }
 
 static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device)
diff --git a/src/southbridge/intel/lynxpoint/hda_verb.c b/src/southbridge/intel/lynxpoint/hda_verb.c
new file mode 100644
index 0000000000..234a1ab439
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/hda_verb.c
@@ -0,0 +1,254 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "pch.h"
+#include "hda_verb.h"
+
+/**
+ * Set bits in a register and wait for status
+ */
+static int set_bits(u32 port, u32 mask, u32 val)
+{
+	u32 reg32;
+	int count;
+
+	/* Write (val & mask) to port */
+	val &= mask;
+	reg32 = read32(port);
+	reg32 &= ~mask;
+	reg32 |= val;
+	write32(port, reg32);
+
+	/* Wait for readback of register to
+	 * match what was just written to it
+	 */
+	count = 50;
+	do {
+		/* Wait 1ms based on BKDG wait time */
+		mdelay(1);
+		reg32 = read32(port);
+		reg32 &= mask;
+	} while ((reg32 != val) && --count);
+
+	/* Timeout occurred */
+	if (!count)
+		return -1;
+	return 0;
+}
+
+/**
+ * Probe for supported codecs
+ */
+int hda_codec_detect(u32 base)
+{
+	u8 reg8;
+
+	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
+	if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0)
+		goto no_codec;
+
+	/* Write back the value once reset bit is set. */
+	write16(base + HDA_GCAP_REG, read16(base + HDA_GCAP_REG));
+
+	/* Read in Codec location (BAR + 0xe)[2..0]*/
+	reg8 = read8(base + HDA_STATESTS_REG);
+	reg8 &= 0x0f;
+	if (!reg8)
+		goto no_codec;
+
+	return reg8;
+
+no_codec:
+	/* Codec Not found */
+	/* Put HDA back in reset (BAR + 0x8) [0] */
+	set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0);
+	printk(BIOS_DEBUG, "HDA: No codec!\n");
+	return 0;
+}
+
+/**
+ * Wait 50usec for the codec to indicate it is ready
+ * no response would imply that the codec is non-operative
+ */
+static int hda_wait_for_ready(u32 base)
+{
+	/* Use a 50 usec timeout - the Linux kernel uses the
+	 * same duration */
+
+	int timeout = 50;
+
+	while(timeout--) {
+		u32 reg32 = read32(base +  HDA_ICII_REG);
+		if (!(reg32 & HDA_ICII_BUSY))
+			return 0;
+		udelay(1);
+	}
+
+	return -1;
+}
+
+/**
+ * Wait 50usec for the codec to indicate that it accepted
+ * the previous command.  No response would imply that the code
+ * is non-operative
+ */
+static int hda_wait_for_valid(u32 base)
+{
+	u32 reg32;
+
+	/* Send the verb to the codec */
+	reg32 = read32(base + HDA_ICII_REG);
+	reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
+	write32(base + HDA_ICII_REG, reg32);
+
+	/* Use a 50 usec timeout - the Linux kernel uses the
+	 * same duration */
+
+	int timeout = 50;
+	while(timeout--) {
+		reg32 = read32(base + HDA_ICII_REG);
+		if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+			HDA_ICII_VALID)
+			return 0;
+		udelay(1);
+	}
+
+	return -1;
+}
+
+/**
+ * Find a specific entry within a verb table
+ *
+ * @verb_table_bytes:	verb table size in bytes
+ * @verb_table_data:	verb table data
+ * @viddid:		vendor/device to search for
+ * @verb_out:		pointer to entry within table
+ *
+ * Returns size of the entry within the verb table,
+ * Returns 0 if the entry is not found
+ *
+ * The HDA verb table is composed of dwords. A set of 4 dwords is
+ * grouped together to form a "jack" descriptor.
+ *   Bits 31:28 - Codec Address
+ *   Bits 27:20 - NID
+ *   Bits 19:8  - Verb ID
+ *   Bits 7:0   - Payload
+ *
+ * coreboot groups different codec verb tables into a single table
+ * and prefixes each with a specific header consisting of 3
+ * dword entries:
+ *   1 - Codec Vendor/Device ID
+ *   2 - Subsystem ID
+ *   3 - Number of jacks (groups of 4 dwords) for this codec
+ */
+static u32 hda_find_verb(u32 verb_table_bytes,
+			 const u32 *verb_table_data,
+			 u32 viddid, const u32 ** verb)
+{
+	int idx=0;
+
+	while (idx < (verb_table_bytes / sizeof(u32))) {
+		u32 verb_size = 4 * verb_table_data[idx+2]; // in u32
+		if (verb_table_data[idx] != viddid) {
+			idx += verb_size + 3; // skip verb + header
+			continue;
+		}
+		*verb = &verb_table_data[idx+3];
+		return verb_size;
+	}
+
+	/* Not all codecs need to load another verb */
+	return 0;
+}
+
+/**
+ * Write a supplied verb table
+ */
+int hda_codec_write(u32 base, u32 size, const u32 *data)
+{
+	int i;
+
+	for (i = 0; i < size; i++) {
+		if (hda_wait_for_ready(base) < 0)
+			return -1;
+
+		write32(base + HDA_IC_REG, data[i]);
+
+		if (hda_wait_for_valid(base) < 0)
+			return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * Initialize codec, then find the verb table and write it
+ */
+int hda_codec_init(u32 base, int addr, int verb_size, const u32 *verb_data)
+{
+	const u32 *verb;
+	u32 reg32, size;
+	int rc;
+
+	printk(BIOS_DEBUG, "HDA: Initializing codec #%d\n", addr);
+
+	if (!verb_size || !verb_data) {
+		printk(BIOS_DEBUG, "HDA: No verb list!\n");
+		return -1;
+	}
+
+	/* 1 */
+	if (hda_wait_for_ready(base) < 0) {
+		printk(BIOS_DEBUG, "  codec not ready.\n");
+		return -1;
+	}
+
+	reg32 = (addr << 28) | 0x000f0000;
+	write32(base + HDA_IC_REG, reg32);
+
+	if (hda_wait_for_valid(base) < 0) {
+		printk(BIOS_DEBUG, "  codec not valid.\n");
+		return -1;
+	}
+
+	/* 2 */
+	reg32 = read32(base + HDA_IR_REG);
+	printk(BIOS_DEBUG, "HDA: codec viddid: %08x\n", reg32);
+
+	size = hda_find_verb(verb_size, verb_data, reg32, &verb);
+	if (!size) {
+		printk(BIOS_DEBUG, "HDA: No verb table entry found\n");
+		return -1;
+	}
+
+	/* 3 */
+	rc = hda_codec_write(base, size, verb);
+
+	if (rc < 0)
+		printk(BIOS_DEBUG, "HDA: verb not loaded\n");
+	else
+		printk(BIOS_DEBUG, "HDA: verb loaded.\n");
+
+	return rc;
+}
diff --git a/src/southbridge/intel/lynxpoint/hda_verb.h b/src/southbridge/intel/lynxpoint/hda_verb.h
new file mode 100644
index 0000000000..8b3d27e1c2
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/hda_verb.h
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LYNXPOINT_HDA_VERB_H
+#define LYNXPOINT_HDA_VERB_H
+
+#define HDA_GCAP_REG		0x00
+#define HDA_GCTL_REG		0x08
+#define   HDA_GCTL_CRST		(1 << 0)
+#define HDA_STATESTS_REG	0x0e
+#define HDA_IC_REG		0x60
+#define HDA_IR_REG		0x64
+#define HDA_ICII_REG		0x68
+#define   HDA_ICII_BUSY		(1 << 0)
+#define   HDA_ICII_VALID	(1 << 1)
+
+int hda_codec_detect(u32 base);
+int hda_codec_write(u32 base, u32 size, const u32 *data);
+int hda_codec_init(u32 base, int addr, int verb_size, const u32 *verb_data);
+
+#endif