summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
diff options
context:
space:
mode:
authorArthur Heymans <arthur@aheymans.xyz>2018-01-25 00:33:45 +0100
committerPatrick Georgi <pgeorgi@google.com>2018-07-30 19:11:00 +0000
commitaade90e68d26a90fbea0dccdaae3493bdf31829a (patch)
tree5e31d203c4beecb94250a458e67cc7d639f0b250 /src/southbridge/intel
parent6cd2c2f6ff792d1a170cd090e3347cfe2e14ac15 (diff)
downloadcoreboot-aade90e68d26a90fbea0dccdaae3493bdf31829a.tar.xz
nb/intel/gm45: Use common code for SMM in TSEG
This makes i82801ix use the common smm southbridge code to set up smm relocation and smi handler setup. This is needed in this change for the the smm relocation code relies on some southbridge functions provided in the common code. Some of the old code is kept for the Q35 qemu target. This also caches the TSEG region and therefore increases MTRR usage a little in some cases. Currently SMRR msr's are not set on model_1067x and model_6fx since this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled properly in the subsequent parallel mp init patchset. Tested on Thinkpad X200: boots and going to and resuming from S3 still works fine. Change-Id: Ic80c65ea42fcf554ea5695772e8828d2f3b00b98 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23419 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/southbridge/intel')
-rw-r--r--src/southbridge/intel/common/smihandler.c4
-rw-r--r--src/southbridge/intel/i82801ix/Kconfig2
-rw-r--r--src/southbridge/intel/i82801ix/Makefile.inc2
-rw-r--r--src/southbridge/intel/i82801ix/smi.c205
-rw-r--r--src/southbridge/intel/i82801ix/smihandler.c423
5 files changed, 17 insertions, 619 deletions
diff --git a/src/southbridge/intel/common/smihandler.c b/src/southbridge/intel/common/smihandler.c
index fb2fe59bd1..0fd8ab0506 100644
--- a/src/southbridge/intel/common/smihandler.c
+++ b/src/southbridge/intel/common/smihandler.c
@@ -484,7 +484,11 @@ static smi_handler_t southbridge_smi[32] = {
* @param node
* @param state_save
*/
+#if IS_ENABLED(CONFIG_SMM_TSEG)
void southbridge_smi_handler(void)
+#else
+void cpu_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+#endif
{
int i, dump = 0;
u32 smi_sts;
diff --git a/src/southbridge/intel/i82801ix/Kconfig b/src/southbridge/intel/i82801ix/Kconfig
index a6debcc378..236b43ace1 100644
--- a/src/southbridge/intel/i82801ix/Kconfig
+++ b/src/southbridge/intel/i82801ix/Kconfig
@@ -26,7 +26,9 @@ config SOUTHBRIDGE_INTEL_I82801IX
select HAVE_SMI_HANDLER
select HAVE_USBDEBUG_OPTIONS
select SOUTHBRIDGE_INTEL_COMMON_GPIO
+ select SOUTHBRIDGE_INTEL_COMMON_SMM
select HAVE_INTEL_FIRMWARE if !BOARD_EMULATION_QEMU_X86_Q35
+ select ACPI_INTEL_HARDWARE_SLEEP_VALUES
if SOUTHBRIDGE_INTEL_I82801IX
diff --git a/src/southbridge/intel/i82801ix/Makefile.inc b/src/southbridge/intel/i82801ix/Makefile.inc
index e563cfcc8b..32d8221213 100644
--- a/src/southbridge/intel/i82801ix/Makefile.inc
+++ b/src/southbridge/intel/i82801ix/Makefile.inc
@@ -32,8 +32,10 @@ ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c
ramstage-y += ../i82801gx/reset.c
ramstage-y += ../i82801gx/watchdog.c
+ifneq ($(CONFIG_SMM_TSEG),y)
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += ../../../cpu/x86/smm/smmrelocate.S
+endif
smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
romstage-y += early_init.c
diff --git a/src/southbridge/intel/i82801ix/smi.c b/src/southbridge/intel/i82801ix/smi.c
index bf3aa6b0d5..2fa0c96659 100644
--- a/src/southbridge/intel/i82801ix/smi.c
+++ b/src/southbridge/intel/i82801ix/smi.c
@@ -25,6 +25,7 @@
#include <cpu/x86/cache.h>
#include <cpu/x86/smm.h>
#include <string.h>
+#include <southbridge/intel/common/pmutil.h>
#include "i82801ix.h"
/* I945/GM45 */
@@ -40,199 +41,6 @@
*/
static u16 pmbase = DEFAULT_PMBASE;
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
- u16 reg16;
-
- reg16 = inw(pmbase + PM1_STS);
- /* set status bits are cleared by writing 1 to them */
- outw(reg16, pmbase + PM1_STS);
-
- return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
- printk(BIOS_DEBUG, "PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
- if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
- if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
- if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
- if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
- if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + SMI_STS);
-
- return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
- printk(BIOS_DEBUG, "SMI_STS: ");
- if (smi_sts & (1 << 27)) printk(BIOS_DEBUG, "GPIO_UNLOCK ");
- if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
- if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
- if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
- if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
- if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
- if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
- if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
- if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
- if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
- if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
- if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
- if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u64 reset_gpe0_status(void)
-{
- u32 reg_h, reg_l;
-
- reg_l = inl(pmbase + GPE0_STS);
- reg_h = inl(pmbase + GPE0_STS + 4);
- /* set status bits are cleared by writing 1 to them */
- outl(reg_l, pmbase + GPE0_STS);
- outl(reg_h, pmbase + GPE0_STS + 4);
-
- return (((u64)reg_h) << 32) | reg_l;
-}
-
-static void dump_gpe0_status(u64 gpe0_sts)
-{
- int i;
- printk(BIOS_DEBUG, "GPE0_STS: ");
- if (gpe0_sts & (1LL << 32)) printk(BIOS_DEBUG, "USB6 ");
- for (i=31; i>= 16; i--) {
- if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
- }
- if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
- if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
- if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
- if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
- if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "USB5 ");
- if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
- if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
- if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE ");
- if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear ALT_GP_SMI_STS
- * @return ALT_GP_SMI_STS register
- */
-static u16 reset_alt_gp_smi_status(void)
-{
- u16 reg16;
-
- reg16 = inl(pmbase + ALT_GP_SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg16, pmbase + ALT_GP_SMI_STS);
-
- return reg16;
-}
-
-static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
-{
- int i;
- printk(BIOS_DEBUG, "ALT_GP_SMI_STS: ");
- for (i=15; i>= 0; i--) {
- if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", i);
- }
- printk(BIOS_DEBUG, "\n");
-}
-
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
- u32 tcobase = pmbase + 0x60;
- u32 reg32;
-
- reg32 = inl(tcobase + 0x04);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
- if (reg32 & (1 << 18))
- outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
-
- return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
- printk(BIOS_DEBUG, "TCO_STS: ");
- if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
- if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
- if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
- if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
- if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
- if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
- if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
- if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
- if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
- if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
- if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief Set the EOS bit
- */
-static void smi_set_eos(void)
-{
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
-}
-
extern uint8_t smm_relocation_start, smm_relocation_end;
static void *default_smm_area = NULL;
@@ -372,14 +180,3 @@ void smm_lock(void)
pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
D_LCK | G_SMRAME | C_BASE_SEG);
}
-
-void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
-{
- /* The GDT or coreboot table is going to live here. But a long time
- * after we relocated the GNVS, so this is not troublesome.
- */
- *(u32 *)0x500 = (u32)gnvs;
- *(u32 *)0x504 = (u32)tcg;
- *(u32 *)0x508 = (u32)smi1;
- outb(APM_CNT_GNVS_UPDATE, 0xb2);
-}
diff --git a/src/southbridge/intel/i82801ix/smihandler.c b/src/southbridge/intel/i82801ix/smihandler.c
index 7ad00ed5ba..e60fa9b788 100644
--- a/src/southbridge/intel/i82801ix/smihandler.c
+++ b/src/southbridge/intel/i82801ix/smihandler.c
@@ -22,16 +22,11 @@
#include <cpu/x86/smm.h>
#include <device/pci_def.h>
#include <pc80/mc146818rtc.h>
+#include <southbridge/intel/common/pmutil.h>
#include "i82801ix.h"
#include "nvs.h"
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-u16 pmbase = DEFAULT_PMBASE;
-u8 smm_initialized = 0;
-
/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
* by coreboot.
*/
@@ -39,160 +34,6 @@ global_nvs_t *gnvs = (global_nvs_t *)0x0;
void *tcg = (void *)0x0;
void *smi1 = (void *)0x0;
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
- u16 reg16;
-
- reg16 = inw(pmbase + PM1_STS);
- /* set status bits are cleared by writing 1 to them */
- outw(reg16, pmbase + PM1_STS);
-
- return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
- printk(BIOS_DEBUG, "PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
- if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
- if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
- if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
- if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
- if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + SMI_STS);
-
- return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
- printk(BIOS_DEBUG, "SMI_STS: ");
- if (smi_sts & (1 << 27)) printk(BIOS_DEBUG, "GPIO_UNLOCK ");
- if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
- if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
- if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
- if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
- if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
- if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
- if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
- if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
- if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
- if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
- if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
- if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u64 reset_gpe0_status(void)
-{
- u32 reg_h, reg_l;
-
- reg_l = inl(pmbase + GPE0_STS);
- reg_h = inl(pmbase + GPE0_STS + 4);
- /* set status bits are cleared by writing 1 to them */
- outl(reg_l, pmbase + GPE0_STS);
- outl(reg_h, pmbase + GPE0_STS + 4);
-
- return (((u64)reg_h) << 32) | reg_l;
-}
-
-static void dump_gpe0_status(u64 gpe0_sts)
-{
- int i;
- printk(BIOS_DEBUG, "GPE0_STS: ");
- if (gpe0_sts & (1LL << 32)) printk(BIOS_DEBUG, "USB6 ");
- for (i=31; i>= 16; i--) {
- if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
- }
- if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
- if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
- if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
- if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
- if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "USB5 ");
- if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
- if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
- if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE ");
- if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
- u32 tcobase = pmbase + 0x60;
- u32 reg32;
-
- reg32 = inl(tcobase + 0x04);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
- if (reg32 & (1 << 18))
- outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
-
- return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
- printk(BIOS_DEBUG, "TCO_STS: ");
- if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
- if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
- if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
- if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
- if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
- if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
- if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
- if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
- if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
- if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
- if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
- printk(BIOS_DEBUG, "\n");
-}
-
int southbridge_io_trap_handler(int smif)
{
switch (smif) {
@@ -210,165 +51,15 @@ int southbridge_io_trap_handler(int smif)
return 0;
}
-/**
- * @brief Set the EOS bit
- */
-void southbridge_smi_set_eos(void)
+void southbridge_update_gnvs(u8 apm_cnt, int *smm_done)
{
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
+ gnvs = *(global_nvs_t **)0x500;
+ tcg = *(void **)0x504;
+ smi1 = *(void **)0x508;
+ *smm_done = 1;
}
-static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state_save)
-{
- u32 pmctrl;
- u8 reg8;
-
- /* Emulate B2 register as the FADT / Linux expects it */
-
- reg8 = inb(APM_CNT);
- if (mainboard_smi_apmc(reg8))
- return;
-
- switch (reg8) {
- case APM_CNT_CST_CONTROL:
- /* Calling this function seems to cause
- * some kind of race condition in Linux
- * and causes a kernel oops
- */
- printk(BIOS_DEBUG, "C-state control\n");
- break;
- case APM_CNT_PST_CONTROL:
- /* Calling this function seems to cause
- * some kind of race condition in Linux
- * and causes a kernel oops
- */
- printk(BIOS_DEBUG, "P-state control\n");
- break;
- case APM_CNT_ACPI_DISABLE:
- pmctrl = inl(pmbase + PM1_CNT);
- pmctrl &= ~SCI_EN;
- outl(pmctrl, pmbase + PM1_CNT);
- printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
- break;
- case APM_CNT_ACPI_ENABLE:
- pmctrl = inl(pmbase + PM1_CNT);
- pmctrl |= SCI_EN;
- outl(pmctrl, pmbase + PM1_CNT);
- printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
- break;
- case APM_CNT_GNVS_UPDATE:
- if (smm_initialized) {
- printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
- return;
- }
- gnvs = *(global_nvs_t **)0x500;
- tcg = *(void **)0x504;
- smi1 = *(void **)0x508;
- smm_initialized = 1;
- printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1);
- break;
- default:
- printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8);
- }
-}
-
-static void southbridge_smi_pm1(unsigned int node, smm_state_save_area_t *state_save)
-{
- u16 pm1_sts;
- volatile u8 cmos_status;
-
- pm1_sts = reset_pm1_status();
- dump_pm1_status(pm1_sts);
-
- /* While OSPM is not active, poweroff immediately
- * on a power button event.
- */
- if (pm1_sts & PWRBTN_STS) {
- // power button pressed
- u32 reg32;
- reg32 = (7 << 10) | (1 << 13);
- outl(reg32, pmbase + PM1_CNT);
- }
-
- if (pm1_sts & RTC_STS) {
- /* read RTC status register to disable the interrupt */
- cmos_status = cmos_read(RTC_REG_C);
- printk(BIOS_DEBUG, "RTC IRQ status: %02X\n", cmos_status);
- }
-}
-
-static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save)
-{
- u32 gpe0_sts;
-
- gpe0_sts = reset_gpe0_status();
- dump_gpe0_status(gpe0_sts);
-}
-
-static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_save)
-{
- u16 reg16;
- reg16 = inw(pmbase + ALT_GP_SMI_STS);
- outl(reg16, pmbase + ALT_GP_SMI_STS);
-
- reg16 &= inw(pmbase + ALT_GP_SMI_EN);
-
- mainboard_smi_gpi(reg16);
-
- if (reg16)
- printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16);
-}
-
-
-static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_save)
-{
- u32 tco_sts;
-
- tco_sts = reset_tco_status();
-
- /* Any TCO event? */
- if (!tco_sts)
- return;
-
- if (tco_sts & (1 << 8)) { // BIOSWR
- u8 bios_cntl;
-
- bios_cntl = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
-
- if (bios_cntl & 1) {
- /* BWE is RW, so the SMI was caused by a
- * write to BWE, not by a write to the BIOS
- */
-
- /* This is the place where we notice someone
- * is trying to tinker with the BIOS. We are
- * trying to be nice and just ignore it. A more
- * resolute answer would be to power down the
- * box.
- */
- printk(BIOS_DEBUG, "Switching back to RO\n");
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
- } /* No else for now? */
- } else if (tco_sts & (1 << 3)) { /* TIMEOUT */
- /* Handle TCO timeout */
- printk(BIOS_DEBUG, "TCO Timeout.\n");
- } else {
- dump_tco_status(tco_sts);
- }
-}
-
-#if DEBUG_PERIODIC_SMIS
-static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *state_save)
-{
- printk(BIOS_DEBUG, "Periodic SMI.\n");
-}
-#endif
-
-static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save)
+void southbridge_smi_monitor(void)
{
#define IOTRAP(x) (trap_sts & (1 << x))
u32 trap_sts, trap_cycle;
@@ -422,104 +113,6 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st
#undef IOTRAP
}
-typedef void (*smi_handler_t)(unsigned int node,
- smm_state_save_area_t *state_save);
-
-smi_handler_t southbridge_smi[32] = {
- NULL, // [0] reserved
- NULL, // [1] reserved
- NULL, // [2] BIOS_STS
- NULL, // [3] LEGACY_USB_STS
- NULL, // [4] SLP_SMI_STS
- southbridge_smi_apmc, // [5] APM_STS
- NULL, // [6] SWSMI_TMR_STS
- NULL, // [7] reserved
- southbridge_smi_pm1, // [8] PM1_STS
- southbridge_smi_gpe0, // [9] GPE0_STS
- southbridge_smi_gpi, // [10] GPI_STS
- NULL, // [11] MCSMI_STS
- NULL, // [12] DEVMON_STS
- southbridge_smi_tco, // [13] TCO_STS
-#if DEBUG_PERIODIC_SMIS
- southbridge_smi_periodic, // [14] PERIODIC_STS
-#else
- NULL, // [14] PERIODIC_STS
-#endif
- NULL, // [15] SERIRQ_SMI_STS
- NULL, // [16] SMBUS_SMI_STS
- NULL, // [17] LEGACY_USB2_STS
- NULL, // [18] INTEL_USB2_STS
- NULL, // [19] reserved
- NULL, // [20] PCI_EXP_SMI_STS
- southbridge_smi_monitor, // [21] MONITOR_STS
- NULL, // [22] reserved
- NULL, // [23] reserved
- NULL, // [24] reserved
- NULL, // [25] reserved
- NULL, // [26] SPI_STS
- NULL, // [27] reserved
- NULL, // [28] reserved
- NULL, // [29] reserved
- NULL, // [30] reserved
- NULL // [31] reserved
-};
-
-static u32 southbrigde_smi_mask_events(u32 smi_sts)
+void southbridge_finalize_all(void)
{
- /* Clear all disabled bits in SMI_EN but the reserved ones. */
- smi_sts &= inl(pmbase + SMI_EN) | 0xf7f99700;
-
- /* Check if SCI is enabled. */
- if (inl(pmbase + PM1_CNT) & SCI_EN)
- /* Clear PM1, GPE. */
- smi_sts &= ~((1 << 8) | (1 << 9));
-
- /* Check if SPI generates SMI. */
- if (!(RCBA16(0x3806) & (1 << 15)) &&
- !(RCBA16(0x3891) & (1 << 15)))
- /* Clear SPI. */
- smi_sts &= ~(1 << 26);
-
- return smi_sts;
-}
-
-/**
- * @brief Interrupt handler for SMI#
- *
- * @param node
- * @param *state_save
- */
-void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
-{
- int i, dump = 0;
- u32 smi_sts;
-
- /* Update global variable pmbase */
- pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), D31F0_PMBASE) & 0xfffc;
-
- /* We need to clear the SMI status registers, or we won't see what's
- * happening in the following calls.
- */
- smi_sts = reset_smi_status();
-
- /* Filter all non-enabled SMI events */
- smi_sts = southbrigde_smi_mask_events(smi_sts);
-
- /* Call SMI sub handler for each of the status bits */
- for (i = 0; i < 31; i++) {
- if (smi_sts & (1 << i)) {
- if (southbridge_smi[i])
- southbridge_smi[i](node, state_save);
- else {
- printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
- "handler available.\n", i);
- dump = 1;
- }
- }
- }
-
- if (dump) {
- dump_smi_status(smi_sts);
- }
-
}