summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
diff options
context:
space:
mode:
authorJoseph Smith <joe@settoplinux.org>2010-03-22 23:10:53 +0000
committerJoseph Smith <joe@smittys.pointclark.net>2010-03-22 23:10:53 +0000
commitb5466b0251a187b345cac1bb1d174590c1d98cab (patch)
tree4761f6fdfbf7ca327a1815c553954b84e2eee2f7 /src/southbridge/intel
parente799c8b140283eccd2db014a0daacc007a195619 (diff)
downloadcoreboot-b5466b0251a187b345cac1bb1d174590c1d98cab.tar.xz
Fix i82801dx_power_options() so CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL works, and rewrite HPET code.
Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/intel')
-rw-r--r--src/southbridge/intel/i82801dx/i82801dx.h12
-rw-r--r--src/southbridge/intel/i82801dx/i82801dx_lpc.c112
2 files changed, 98 insertions, 26 deletions
diff --git a/src/southbridge/intel/i82801dx/i82801dx.h b/src/southbridge/intel/i82801dx/i82801dx.h
index cb062bf1d4..a1c30c290e 100644
--- a/src/southbridge/intel/i82801dx/i82801dx.h
+++ b/src/southbridge/intel/i82801dx/i82801dx.h
@@ -37,6 +37,14 @@ extern void i82801dx_enable(device_t dev);
#endif
#define IO_APIC_ADDR 0xfec00000
+
+/*
+ * HPET Memory Address Range. Possible values:
+ * 0xfed00000 for FED0_0000h - FED0_03FFh
+ * 0xfed01000 for FED0_1000h - FED0_13FFh
+ * 0xfed02000 for FED0_2000h - FED0_23FFh
+ * 0xfed03000 for FED0_3000h - FED0_33FFh
+ */
#define HPET_ADDR 0xfed00000
#define DEBUG_PERIODIC_SMIS 0
@@ -202,6 +210,10 @@ extern void i82801dx_enable(device_t dev);
#define TCOBASE 0x60 /* TCO Base Address Register */
#define TCO1_CNT 0x08 /* TCO1 Control Register */
+#define GEN_PMCON_1 0xa0
+#define GEN_PMCON_2 0xa2
+#define GEN_PMCON_3 0xa4
+
/* GEN_PMCON_3 bits */
#define RTC_BATTERY_DEAD (1 << 2)
#define RTC_POWER_FAILED (1 << 1)
diff --git a/src/southbridge/intel/i82801dx/i82801dx_lpc.c b/src/southbridge/intel/i82801dx/i82801dx_lpc.c
index ae522c310b..c57bf0919b 100644
--- a/src/southbridge/intel/i82801dx/i82801dx_lpc.c
+++ b/src/southbridge/intel/i82801dx/i82801dx_lpc.c
@@ -64,7 +64,6 @@ static void i82801dx_enable_ioapic(struct device *dev)
if (reg32 != (1 << 25))
die("APIC Error\n");
- /* TODO: From i82801ca, needed/useful on other ICH? */
*ioapic_index = 3; /* Select Boot Configuration register. */
*ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
}
@@ -91,37 +90,85 @@ static void i82801dx_pirq_init(device_t dev)
pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
-
}
static void i82801dx_power_options(device_t dev)
{
- u8 byte;
- int pwr_on = -1;
+ u8 reg8;
+ u16 reg16, pmbase;
+ u32 reg32;
+ const char *state;
+
+ int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
int nmi_option;
- /* power after power fail */
- /* FIXME this doesn't work! */
/* Which state do we want to goto after g3 (power restored)?
* 0 == S0 Full On
* 1 == S5 Soft Off
+ *
+ * If the option is not existent (Laptops), use MAINBOARD_POWER_ON.
*/
- pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1);
- printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off");
+ if (get_option(&pwr_on, "power_on_after_fail") < 0)
+ pwr_on = MAINBOARD_POWER_ON;
- /* Set up NMI on errors. */
- byte = inb(0x61);
- byte &= ~(1 << 3); /* IOCHK# NMI Enable */
- byte &= ~(1 << 2); /* PCI SERR# Enable */
- outb(byte, 0x61);
- byte = inb(0x70);
+ reg8 = pci_read_config8(dev, GEN_PMCON_3);
+ reg8 &= 0xfe;
+ switch (pwr_on) {
+ case MAINBOARD_POWER_OFF:
+ reg8 |= 1;
+ state = "off";
+ break;
+ case MAINBOARD_POWER_ON:
+ reg8 &= ~1;
+ state = "on";
+ break;
+ case MAINBOARD_POWER_KEEP:
+ reg8 &= ~1;
+ state = "state keep";
+ break;
+ default:
+ state = "undefined";
+ }
+
+ reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */
+
+ pci_write_config8(dev, GEN_PMCON_3, reg8);
+ printk_info("Set power %s after power failure.\n", state);
+ /* Set up NMI on errors. */
+ reg8 = inb(0x61);
+ reg8 &= 0x0f; /* Higher Nibble must be 0 */
+ reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */
+ // reg8 &= ~(1 << 2); /* PCI SERR# Enable */
+ reg8 |= (1 << 2); /* PCI SERR# Disable for now */
+ outb(reg8, 0x61);
+
+ reg8 = inb(0x70);
nmi_option = NMI_OFF;
get_option(&nmi_option, "nmi");
if (nmi_option) {
- byte &= ~(1 << 7); /* Set NMI. */
- outb(byte, 0x70);
+ printk_info ("NMI sources enabled.\n");
+ reg8 &= ~(1 << 7); /* Set NMI. */
+ } else {
+ printk_info ("NMI sources disabled.\n");
+ reg8 |= ( 1 << 7); /* Disable NMI. */
}
+ outb(reg8, 0x70);
+
+ /* Set SMI# rate down and enable CPU_SLP# */
+ reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 &= ~(3 << 0); // SMI# rate 1 minute
+ reg16 |= (1 << 5); // CPUSLP_EN Desktop only
+ pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+ pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+
+ /* Set up power management block and determine sleep mode */
+ reg32 = inl(pmbase + 0x04); // PM1_CNT
+
+ reg32 &= ~(7 << 10); // SLP_TYP
+ reg32 |= (1 << 0); // SCI_EN
+ outl(reg32, pmbase + 0x04);
}
static void gpio_init(device_t dev)
@@ -182,23 +229,36 @@ static void i82801dx_lpc_decode_en(device_t dev)
*/
static void enable_hpet(struct device *dev)
{
- u32 reg32;
- u32 code = (0 & 0x3);
+ u32 reg32, hpet, val;
+ /* Set HPET base address and enable it */
+ printk_debug("Enabling HPET at 0x%x\n", HPET_ADDR);
reg32 = pci_read_config32(dev, GEN_CNTL);
- reg32 |= (1 << 17); /* Enable HPET. */
/*
- * Bits [16:15] Memory Address Range
- * 00 FED0_0000h - FED0_03FFh
- * 01 FED0_1000h - FED0_13FFh
- * 10 FED0_2000h - FED0_23FFh
- * 11 FED0_3000h - FED0_33FFh
+ * Bit 17 is HPET enable bit.
+ * Bit 16:15 control the HPET base address.
*/
reg32 &= ~(3 << 15); /* Clear it */
- reg32 |= (code << 15);
+
+ hpet = HPET_ADDR >> 12;
+ hpet &= 0x3;
+
+ reg32 |= (hpet << 15);
+ reg32 |= (1 << 17); /* Enable HPET. */
pci_write_config32(dev, GEN_CNTL, reg32);
- printk(BIOS_DEBUG, "Enabling HPET @0x%x\n", HPET_ADDR | (code << 12));
+ /* Check to see whether it took */
+ reg32 = pci_read_config32(dev, GEN_CNTL);
+ val = reg32 >> 15;
+ val &= 0x7;
+
+ if ((val & 0x4) && (hpet == (val & 0x3))) {
+ printk_debug("HPET enabled at 0x%x\n", HPET_ADDR);
+ } else {
+ printk_err("HPET was not enabled correctly\n");
+ reg32 &= ~(1 << 17); /* Clear Enable */
+ pci_write_config32(dev, GEN_CNTL, reg32);
+ }
}
static void lpc_init(struct device *dev)