diff options
| author | Sven Schnelle <svens@stackframe.org> | 2011-10-27 13:05:40 +0200 |
|---|---|---|
| committer | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2011-10-27 18:27:07 +0200 |
| commit | b2f173e168b5a368eab138a22be5524159532c63 (patch) | |
| tree | b4c683ae59071a459d5e36e682215423a04a18d3 /src/southbridge/intel | |
| parent | 5e4e2290b653b068b1ca55205efd3fbfcc1fda34 (diff) | |
| download | coreboot-b2f173e168b5a368eab138a22be5524159532c63.tar.xz | |
i82801gx: Fix port status in AHCI mode
The code used PCI register 0x92 to enable sata ports,
which is wrong. The ICH7 documentation states:
"This register is only used in systems that do not
support AHCI. In AHCI enabled systems, bits[3:0] must
always be set (ICH7R only) / bits[2,0] must always be set
(Mobile only), and the status of the port is controlled
through AHCI memory space."
Writing 0x0f to ICH7-M doesn't seem to hurt, so lets write
0x0f for both variants. This patch makes sata_ahci work on
my Thinkpad T60 and X60s.
Change-Id: If3b3daec2e5fbaa446de00272ebde01cd8d52475
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/340
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/southbridge/intel')
| -rw-r--r-- | src/southbridge/intel/i82801gx/chip.h | 1 | ||||
| -rw-r--r-- | src/southbridge/intel/i82801gx/sata.c | 9 |
2 files changed, 9 insertions, 1 deletions
diff --git a/src/southbridge/intel/i82801gx/chip.h b/src/southbridge/intel/i82801gx/chip.h index b775d39ee8..cc17539d7d 100644 --- a/src/southbridge/intel/i82801gx/chip.h +++ b/src/southbridge/intel/i82801gx/chip.h @@ -68,6 +68,7 @@ struct southbridge_intel_i82801gx_config { uint32_t ide_enable_primary; uint32_t ide_enable_secondary; uint32_t sata_ahci; + uint32_t sata_ports_implemented; int c4onc3_enable:1; }; diff --git a/src/southbridge/intel/i82801gx/sata.c b/src/southbridge/intel/i82801gx/sata.c index c3908489eb..0e7a1a740c 100644 --- a/src/southbridge/intel/i82801gx/sata.c +++ b/src/southbridge/intel/i82801gx/sata.c @@ -30,6 +30,8 @@ static void sata_init(struct device *dev) { u32 reg32; u16 reg16; + u32 *ahci_bar; + /* Get the chip configuration */ config_t *config = dev->chip_info; @@ -106,9 +108,14 @@ static void sata_init(struct device *dev) /* Set Sata Controller Mode. */ pci_write_config8(dev, 0x90, 0x40); // 40=AHCI - /* Port 0 & 1 enable */ + /* In ACHI mode, bit[3:0] must always be set + * (Port status is controlled through AHCI BAR) + */ pci_write_config8(dev, 0x92, 0x0f); + ahci_bar = (u32 *)(pci_read_config32(dev, 0x27) & ~0x3ff); + ahci_bar[3] = config->sata_ports_implemented; + /* SATA Initialization register */ pci_write_config32(dev, 0x94, 0x1a000180); } else { |