coreboot has 13 instances of IOAPIC setup distributed across a lot

of components. This patch is a rewrite of the generic IOAPIC setup code.
Additionally it drops the other 12 instances of IOAPIC setup code and
makes the components use the generic code.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 2 insertions, 78 deletions

diff --git a/src/southbridge/nvidia/ck804/ck804_lpc.c b/src/southbridge/nvidia/ck804/ck804_lpc.c
index 546c27a8fd..2b840fcbdd 100644
--- a/src/southbridge/nvidia/ck804/ck804_lpc.c
+++ b/src/southbridge/nvidia/ck804/ck804_lpc.c
@@ -15,6 +15,7 @@
 #include <pc80/isa-dma.h>
 #include <bitops.h>
 #include <arch/io.h>
+#include <arch/ioapic.h>
 #include <cpu/x86/lapic.h>
 #include <stdlib.h>
 #include "ck804.h"
@@ -23,83 +24,6 @@
 
 #define NMI_OFF 0
 
-struct ioapicreg {
-	unsigned int reg;
-	unsigned int value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL		(0xff << 24)
-#define NONE		(0)
-#define DISABLED	(1 << 16)
-#define ENABLED		(0 << 16)
-#define TRIGGER_EDGE	(0 << 15)
-#define TRIGGER_LEVEL	(1 << 15)
-#define POLARITY_HIGH	(0 << 13)
-#define POLARITY_LOW	(1 << 13)
-#define PHYSICAL_DEST	(0 << 11)
-#define LOGICAL_DEST	(1 << 11)
-#define ExtINT		(7 << 8)
-#define NMI		(4 << 8)
-#define SMI		(2 << 8)
-#define INT		(1 << 8)
-	/* IO-APIC virtual wire mode configuration */
-	/* mask, trigger, polarity, destination, delivery, vector */
-	{0,  ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
-	{1,  DISABLED, NONE},
-	{2,  DISABLED, NONE},
-	{3,  DISABLED, NONE},
-	{4,  DISABLED, NONE},
-	{5,  DISABLED, NONE},
-	{6,  DISABLED, NONE},
-	{7,  DISABLED, NONE},
-	{8,  DISABLED, NONE},
-	{9,  DISABLED, NONE},
-	{10, DISABLED, NONE},
-	{11, DISABLED, NONE},
-	{12, DISABLED, NONE},
-	{13, DISABLED, NONE},
-	{14, DISABLED, NONE},
-	{15, DISABLED, NONE},
-	{16, DISABLED, NONE},
-	{17, DISABLED, NONE},
-	{18, DISABLED, NONE},
-	{19, DISABLED, NONE},
-	{20, DISABLED, NONE},
-	{21, DISABLED, NONE},
-	{22, DISABLED, NONE},
-	{23, DISABLED, NONE},
-	/* Be careful and don't write past the end... */
-};
-
-static void setup_ioapic(unsigned long ioapic_base)
-{
-	int i;
-	unsigned long value_low, value_high;
-	/* unsigned long ioapic_base = 0xfec00000; */
-	volatile unsigned long *l;
-	struct ioapicreg *a = ioapicregvalues;
-
-	ioapicregvalues[0].value_high = lapicid() << (56 - 32);
-
-	l = (unsigned long *)ioapic_base;
-
-	for (i = 0; i < ARRAY_SIZE(ioapicregvalues); i++, a++) {
-		l[0] = (a->reg * 2) + 0x10;
-		l[4] = a->value_low;
-		value_low = l[4];
-		l[0] = (a->reg * 2) + 0x11;
-		l[4] = a->value_high;
-		value_high = l[4];
-		if ((i == 0) && (value_low == 0xffffffff)) {
-			printk_warning("IO APIC not responding.\n");
-			return;
-		}
-		printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
-			    a->reg, a->value_low, a->value_high);
-	}
-}
-
 // 0x7a or e3
 #define PREVIOUS_POWER_STATE 0x7A
 
@@ -123,7 +47,7 @@ static void lpc_common_init(device_t dev)
 	pci_write_config8(dev, 0x74, byte);
 	dword = pci_read_config32(dev, PCI_BASE_ADDRESS_1);	/* 0x14 */
 
-	setup_ioapic(dword);
+	setup_ioapic(dword, 0); // Don't rename IOAPIC ID
 
 #if 1
 	dword = pci_read_config32(dev, 0xe4);