summaryrefslogtreecommitdiff
path: root/src/southbridge/ricoh
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2005-11-22 00:07:02 +0000
committerRonald G. Minnich <rminnich@gmail.com>2005-11-22 00:07:02 +0000
commit43225bc8042b32d52b31c788daee1e42bd1fa28e (patch)
tree951e0acc732af7483565e4b0d5d42d1c849e2562 /src/southbridge/ricoh
parent86cbd33837207e06a9ae41efe65ac2401e885c4b (diff)
downloadcoreboot-43225bc8042b32d52b31c788daee1e42bd1fa28e.tar.xz
EPIA-M fixup
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2090 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/ricoh')
-rw-r--r--src/southbridge/ricoh/rl5c476/chip.h5
-rw-r--r--src/southbridge/ricoh/rl5c476/rl5c476.c265
-rw-r--r--src/southbridge/ricoh/rl5c476/rl5c476.h4
3 files changed, 132 insertions, 142 deletions
diff --git a/src/southbridge/ricoh/rl5c476/chip.h b/src/southbridge/ricoh/rl5c476/chip.h
index 5d7a2e3ab6..c4cd9d7997 100644
--- a/src/southbridge/ricoh/rl5c476/chip.h
+++ b/src/southbridge/ricoh/rl5c476/chip.h
@@ -1,10 +1,11 @@
#ifndef _SOUTHBRIDGE_RICOH_RL5C476
#define _SOUTHBRIDGE_RICOH_RL5C476
-extern struct chip_operations southbridge_ricoh_rl5c476_control;
+extern struct chip_operations southbridge_ricoh_rl5c476_ops;
struct southbridge_ricoh_rl5c476_config {
- int num;
+ int enable_cf;
+
};
#endif /* _SOUTHBRIDGE_RL5C476 */
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c
index ede34b61f5..8495c3f941 100644
--- a/src/southbridge/ricoh/rl5c476/rl5c476.c
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.c
@@ -14,10 +14,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
-
+/* (C) Copyright 2005 Nick Barker <nick.barker@btinternet.com
+ brought into line with the current architecture of LinuxBios */
#include <arch/io.h>
@@ -26,194 +27,174 @@
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <console/console.h>
+#include <device/cardbus.h>
#include "rl5c476.h"
#include "chip.h"
+static int enable_cf_boot = 0;
+static unsigned int cf_base;
+
static void udelay(int i){
for(; i > 0 ; i--)
inb(0x80);
}
-static void
-dump_south(void)
-{
- device_t dev0;
- dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, 0);
- dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev0);
- int i,j;
-
- for(i = 0; i < 256; i += 16) {
- printk_debug("0x%x: ", i);
- for(j = 0; j < 16; j++) {
- printk_debug("%02x ", pci_read_config8(dev0, i+j));
- }
- printk_debug("\n");
- }
- printk_debug("Card32\n");
- for(i = 0 ; i < 256 ; i+=16){
- printk_debug("0x%x: ",i);
- for(j = 0 ; j < 16 ; j++){
- printk_debug(" %02x",*(unsigned char *)(0x80000000+i+j));
- }
- printk_debug("\n");
- }
- printk_debug("Card16\n");
- for(i = 0; i < 256; i += 16) {
- printk_debug("0x%x: ", i);
- for(j = 0; j < 16; j++) {
- printk_debug("%02x ", *(unsigned char *)(0x80000800+ i+j));
- }
- printk_debug("\n");
- }
- printk_debug("CF Config\n");
- for(i = 0 ; i < 256 ; i+=16){
- printk_debug("0x%x: ",i);
- for(j=0 ; j < 16 ; j++){
- printk_debug("%02x ",*(unsigned char *)(0x81000200 + i + j));
- }
- printk_debug("\n");
- }
-}
-
-
static void rl5c476_init(device_t dev)
{
//unsigned char enables;
pc16reg_t *pc16;
- int i;
-#error "FIXME implement carbus bridge support"
-#error "FIXME this code is close to a but the conversion needs more work"
+ unsigned char *base;
+
/* cardbus controller function 1 for CF Socket */
printk_debug("rl5c476 init\n");
- /* setup pci header manually because 'pci_device.c' doesn't know how to handle
- * pci to cardbus bridges - (header type 2 I think)
- */
+ printk_debug("CF Base = %0x\n",cf_base);
+ /* misc control register */
+ pci_write_config16(dev,0x82,0x00a0);
- /* initialize function zero - pcmcia socket so it behaves itself */
- /* FIXME - statically put control memory at 0xe0000000 for now
- * one day the pci_device allocator might do this */
- pci_write_config32(dev,0x10,0xe0000000);
- pci_write_config8(dev,0x0d,0x20);
- pci_write_config8(dev,0x19,0x02);
- pci_write_config8(dev,0x1a,0x02);
- pci_write_config8(dev,0x1b,0x20);
- //pci_write_config8(dev,0x3c,0);
- pci_write_config8(dev,0x82,0x00a0);
- pci_write_config16(dev,0x04,0x07);
+ /* set up second slot as compact flash port if asked to do so */
+ if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){
-
- /* get second function - i.e. compact flash socket */
- dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev);
+ /* make sure isa interrupts are enabled */
+ pci_write_config16(dev,0x3e,0x0780);
+ /* pick up where 16 bit card control structure is (0x800 bytes into config structure) */
+ base = (unsigned char *)pci_read_config32(dev,0x10);
+ pc16 = (pc16reg_t *)(base + 0x800);
- /* FIXME - control structure statically declared at 0xe0008000 for now */
- pci_write_config32(dev,0x10,0xe0008000);
- pci_write_config8(dev,0x0d,0x20);
- pci_write_config8(dev,0x19,0x03);
- pci_write_config8(dev,0x1a,0x03);
- pci_write_config8(dev,0x1b,0x20);
+ /* disable memory and io windows and turn off socket power */
+ pc16->pwctrl = 0;
- //pci_write_config8(dev,0x3c,0x0);
- pci_write_config16(dev,0x3e,0x0780);
- pci_write_config16(dev,0x82,0x00a0);
+ /* disable irq lines */
+ pc16->igctrl = 0;
- pci_write_config16(dev,0x04,0x07);
+ /* disable memory and I/O windows */
+ pc16->awinen = 0;
+ /* reset card, configure for I/O and set IRQ line */
+ pc16->igctrl = 0x69;
- /* pick up where 16 bit card control structure is */
- pc16 = (pc16reg_t *)(0xe0008800);
+ // set io window 0 for 1e0 - 1ef
+ /* note this now sets CF up on a contiguous I/O window of 16 bytes, 0x1e0 to 0x1ef
+ Be warned that this is not a standard IDE address as automatically detected by the likes
+ of Filo, and would need patching to recognise these addresses as an IDE drive */
+ /* an earlier version of this driver set up 2 io windows to emulate the expected addresses
+ for IDE2, however the pcmcia package within Linux then could not re-initiailse the
+ device as it tried to take control of it. So I belive it is easier to patch Filo or the like
+ to pick up this drive rather than playing silly games as the kernel tries to boot.
+ */
+ pc16->iostl0 = 0xe0;
+ pc16->iosth0 = 1;
- /* disable memory and io windows and turn off socket power */
- pc16->pwctrl = 0;
+ pc16->iospl0 = 0xef;
+ pc16->iosph0 = 1;
- /* disable irq lines */
- pc16->igctrl = 0;
+ pc16->ioffl0 = 0;
+ pc16->ioffh0 = 0;
- /* disable memory and I/O windows */
- pc16->awinen = 0;
+ // clear window 1
+ pc16->iostl1 = 0;
+ pc16->iosth1 = 0;
- /* reset card, configure for I/O and set IRQ line */
- pc16->igctrl = 0x69;
+ pc16->iospl1 = 0;
+ pc16->iosph1 = 0;
+ pc16->ioffl1 = 0x0;
+ pc16->ioffh1 = 0;
- // set io window 0 for 1e8 - 1ef
- pc16->iostl0 = 0xe8;
- pc16->iosth0 = 1;
- pc16->iospl0 = 0xef;
- pc16->iosph0 = 1;
- // add io offset of 8 so that CF card will decode 0x1e8 as 0x1f0 i.e. the first byte of
- // a 16 byte aligned, 16 byte window etc
- pc16->ioffl0 = 0x8;
- pc16->ioffh0 = 0;
+ // set up CF config window
+ pc16->smpga0 = cf_base>>24;
+ pc16->smsth0 = (cf_base>>20)&0x0f;
+ pc16->smstl0 = (cf_base>>12)&0xff;
+ pc16->smsph0 = ((cf_base>>20)&0x0f) | 0x80;
+ pc16->smspl0 = (cf_base>>12)&0xff;
+ pc16->moffl0 = 0;
+ pc16->moffh0 = 0x40;
- // set io window 1 for 3ed - 3ee
- pc16->iostl1 = 0xed;
- pc16->iosth1 = 3;
- pc16->iospl1 = 0xee;
- pc16->iosph1 = 3;
+ // set I/O width for Auto Data width
+ pc16->ioctrl = 0x22;
- pc16->ioffl1 = 0x0;
- pc16->ioffh1 = 0;
+ // enable I/O window 0 and 1
+ pc16->awinen = 0xc1;
- // FIXME statically declare CF config window at 0xe1000000
- pc16->smstl0 = 0;
- pc16->smsth0 = 0;
- pc16->smspl0 = 0;
- pc16->smsph0 = 0x80;
- pc16->moffl0 = 0;
- pc16->moffh0 = 0x40;
- pc16->smpga0 = 0xe1;
- // set I/O width for Auto Data width
- pc16->ioctrl = 0x22;
+ pc16->miscc1 = 1;
+ // apply power and enable outputs
+ pc16->pwctrl = 0xb0;
+
- // enable I/O window 0 and 1
- pc16->awinen = 0xc1;
+ // delay could be optimised, but this works
+ udelay(100000);
+
+ pc16->igctrl = 0x69;
- pc16->miscc1 = 1;
+ // 16 bit CF always have first config byte at 0x200 into Config structure,
+ // but CF+ May Not according to spec - should locate through reading tuple data,
+ // but this will do for now !!!
+ unsigned char *cptr;
+ cptr = (unsigned char *)(cf_base + 0x200);
+ printk_debug("CF Config = %x\n",*cptr);
- // apply power and enable outputs
- pc16->pwctrl = 0xb0;
-
+ // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io
+ // windows of the bridge set up above to map those bytes into the
+ // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee)
+ *cptr = 0x41;
+ }
- // delay could be optimised, but this works
- udelay(100000);
-
- pc16->igctrl = 0x69;
+}
- unsigned char *cptr;
- cptr = (unsigned char *)(0xe1000200);
- printk_debug("CF Config = %x\n",*cptr);
+void rl5c476_read_resources(device_t dev)
+{
- // FIX Me 16 bit CF always have first config byte at 0x200 into Config structure,
- // but CF+ May Not according to spec - should locate through reading tuple data,
- // but this will do for now !!!
+ struct resource *resource;
+ /* for cf socket we need an extra memory window for the control structure of the cf itself */
+ if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){
+ resource = new_resource(dev,1); /* fake index as it isn't in pci config space */
+ resource->flags |= IORESOURCE_MEM ;
+ resource->size = 0x1000;
+ resource->align = resource->gran = 12;
+ resource->limit= 0xffff0000;
+ //compute_allocate_resource(&dev->link[0],resource,resource->flags,resource->flags);
+ }
+ cardbus_read_resources(dev);
- // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io
- // windows of the bridge set up above to map those bytes into the
- // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee)
- *cptr = 0x41;
+}
+void rl5c476_set_resources(device_t dev)
+{
+
+ struct resource *resource;
+ printk_debug("%s In set resources \n",dev_path(dev));
+ if( enable_cf_boot && (PCI_FUNC(dev->path.u.pci.devfn) == 1)){
+ resource = find_resource(dev,1);
+ if( !(resource->flags & IORESOURCE_STORED) ){
+ resource->flags |= IORESOURCE_STORED ;
+ compute_allocate_resource(&dev->link[0],resource,resource->flags,resource->flags);
+ printk_debug("%s 1 ==> %x\n",dev_path(dev),resource->base);
+ cf_base = resource->base;
+ }
+ }
+
+ pci_dev_set_resources(dev);
}
static struct device_operations ricoh_rl5c476_ops = {
- .read_resources = pci_bus_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_bus_enable_resources,
- .inti = rl5c476_init,
- .scan_bus = pci_scan_bridge,
+ .read_resources = rl5c476_read_resources,
+ .set_resources = rl5c476_set_resources,
+ .enable_resources = cardbus_enable_resources,
+ .init = rl5c476_init,
+ .scan_bus = cardbus_scan_bridge,
};
static struct pci_driver ricoh_rl5c476_driver __pci_driver = {
@@ -222,7 +203,15 @@ static struct pci_driver ricoh_rl5c476_driver __pci_driver = {
.device = PCI_DEVICE_ID_RICOH_RL5C476,
};
-struct chip_operations southbridge_ricoh_rl5c476_control = {
+void southbridge_init(device_t dev)
+{
+
+ struct southbridge_ricoh_rl5c476_config *conf = dev->chip_info;
+ enable_cf_boot = conf->enable_cf;
+
+}
+
+struct chip_operations southbridge_ricoh_rl5c476_ops = {
CHIP_NAME("RICOH RL5C476")
- .enable = southbridge_init,
+ .enable_dev = southbridge_init,
};
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.h b/src/southbridge/ricoh/rl5c476/rl5c476.h
index 0ded3d5aa9..c2da0de17f 100644
--- a/src/southbridge/ricoh/rl5c476/rl5c476.h
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.h
@@ -14,8 +14,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
/* rl5c476 routines and defines*/