diff options
author | Florian Zumbiehl <florz@florz.de> | 2011-11-01 20:17:14 +0100 |
---|---|---|
committer | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2011-11-10 23:54:41 +0100 |
commit | be7d8dcf8d2641ca413514e571f77f8aa7984d19 (patch) | |
tree | 0750f92dcda5b130b7bdea3f0fd24e428ca60122 /src/southbridge/via/k8t890/early_car.c | |
parent | 583abc2eb2f1942fa8384c7e9fcfa830322b4c3b (diff) | |
download | coreboot-be7d8dcf8d2641ca413514e571f77f8aa7984d19.tar.xz |
support for different location of HT registers in old version of K8T800
Change-Id: I2ad82b8059efb09f0593933cb6f53b51b653d494
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/373
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/southbridge/via/k8t890/early_car.c')
-rw-r--r-- | src/southbridge/via/k8t890/early_car.c | 30 |
1 files changed, 22 insertions, 8 deletions
diff --git a/src/southbridge/via/k8t890/early_car.c b/src/southbridge/via/k8t890/early_car.c index c554c4993d..da7b4dbb68 100644 --- a/src/southbridge/via/k8t890/early_car.c +++ b/src/southbridge/via/k8t890/early_car.c @@ -35,6 +35,12 @@ /* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */ static u8 ldtreg[3] = {0x86, 0xa6, 0xc6}; +#if CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD +#define K8X8XX_HT_CFG_BASE 0xc0 +#else +#define K8X8XX_HT_CFG_BASE 0x60 +#endif + /* This functions sets KT890 link frequency and width to same values as * it has been setup on K8 side, by AMD NB init. * This will not work for K8T800_OLD, which has a slightly different @@ -43,10 +49,13 @@ static u8 ldtreg[3] = {0x86, 0xa6, 0xc6}; u8 k8t890_early_setup_ht(void) { - u8 awidth, afreq, cldtfreq, reg; + u8 awidth, afreq, cldtfreq; u8 cldtwidth_in, cldtwidth_out, vldtwidth_in, vldtwidth_out, ldtnr, width; u16 vldtcaps; +#if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD + u8 reg; + /* hack, enable NVRAM in chipset */ pci_write_config8(PCI_DEV(0, 0x0, 0), K8T890_MULTIPLE_FN_EN, 0x01); @@ -58,6 +67,7 @@ u8 k8t890_early_setup_ht(void) reg = pci_read_config8(PCI_DEV(0, 0x0, 2), 0xa1); reg |= 0x1; pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa1, reg); +#endif /* check if connected non coherent, initcomplete (find the SB on K8 side) */ ldtnr = 0; @@ -73,6 +83,10 @@ u8 k8t890_early_setup_ht(void) print_debug("K8M800 found at LDT "); #elif CONFIG_SOUTHBRIDGE_VIA_K8T800 print_debug("K8T800 found at LDT "); +#elif CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD + print_debug("K8T800_OLD found at LDT "); + pci_write_config8(PCI_DEV(0, 0x0, 0), 0x64, 0x00); + pci_write_config8(PCI_DEV(0, 0x0, 0), 0xdd, 0x50); #elif CONFIG_SOUTHBRIDGE_VIA_K8T800PRO print_debug("K8T800 Pro found at LDT "); #elif CONFIG_SOUTHBRIDGE_VIA_K8M890 @@ -87,19 +101,19 @@ u8 k8t890_early_setup_ht(void) /* get the maximum widths for both sides */ cldtwidth_in = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) & 0x7; cldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) >> 4) & 0x7; - vldtwidth_in = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x66) & 0x7; - vldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x0, 0), 0x66) >> 4) & 0x7; + vldtwidth_in = pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x6) & 0x7; + vldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x6) >> 4) & 0x7; width = MIN(MIN(MIN(cldtwidth_out, cldtwidth_in), vldtwidth_out), vldtwidth_in); print_debug(" Agreed on width: "); print_debug_hex8(width); - awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x67); + awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x7); /* Update the desired HT LNK to match AMD NB max from VIA NB is 0x1 */ width = (width == 0x01) ? 0x11 : 0x00; - pci_write_config8(PCI_DEV(0, 0x0, 0), 0x67, width); + pci_write_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x7, width); /* Get programmed HT freq at base 0x89 */ cldtfreq = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr] + 3) & 0xf; @@ -107,15 +121,15 @@ u8 k8t890_early_setup_ht(void) print_debug_hex8(cldtfreq); print_debug(" VIA HT caps: "); - vldtcaps = pci_read_config16(PCI_DEV(0, 0, 0), 0x6e); + vldtcaps = pci_read_config16(PCI_DEV(0, 0, 0), K8X8XX_HT_CFG_BASE + 0xe); print_debug_hex16(vldtcaps); if (!(vldtcaps & (1 << cldtfreq ))) { die("Chipset does not support desired HT frequency\n"); } - afreq = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x6d); - pci_write_config8(PCI_DEV(0, 0x0, 0), 0x6d, cldtfreq); + afreq = pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0xd); + pci_write_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0xd, cldtfreq); print_debug("\n"); /* no reset needed */ |