Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-60

Creator:  Li-Ta Lo <ollie@lanl.gov>

More Via EPIA 

more via epia stuff, including the trival but fatal bug in auto.c


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 154 insertions, 0 deletions

diff --git a/src/southbridge/via/vt8231/vt8231_lpc.c b/src/southbridge/via/vt8231/vt8231_lpc.c
new file mode 100644
index 0000000000..9564b55ae7
--- /dev/null
+++ b/src/southbridge/via/vt8231/vt8231_lpc.c
@@ -0,0 +1,154 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+
+#include <pc80/mc146818rtc.h>
+
+#include "vt8231.h"
+#include "chip.h"
+
+/* PIRQ init
+ */
+void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]);
+static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 };
+static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 };
+static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
+
+/*
+	Our IDSEL mappings are as follows
+	PCI slot is AD31          (device 15) (00:14.0)
+	Southbridge is AD28       (device 12) (00:11.0)
+*/
+static void pci_routing_fixup(struct device *dev)
+{
+
+	printk_info("%s: dev is %p\n", __FUNCTION__, dev);
+	if (dev) {
+		/* initialize PCI interupts - these assignments depend
+		   on the PCB routing of PINTA-D 
+
+		   PINTA = IRQ11
+		   PINTB = IRQ5
+		   PINTC = IRQ10
+		   PINTD = IRQ12
+		*/
+		pci_write_config8(dev, 0x55, 0xb0);
+		pci_write_config8(dev, 0x56, 0xa5);
+		pci_write_config8(dev, 0x57, 0xc0);
+	}
+
+	// Standard southbridge components
+	printk_info("setting southbridge\n");
+	pci_assign_irqs(0, 0x11, southbridgeIrqs);
+
+	// Ethernet built into southbridge
+	printk_info("setting ethernet\n");
+	pci_assign_irqs(0, 0x12, enetIrqs);
+
+	// PCI slot
+	printk_info("setting pci slot\n");
+	pci_assign_irqs(0, 0x14, slotIrqs);
+	printk_info("%s: DONE\n", __FUNCTION__);
+}
+
+static void vt8231_init(struct device *dev)
+{
+	unsigned char enables;
+	struct southbridge_via_vt8231_config *conf = dev->chip_info;
+
+	printk_debug("vt8231 init\n");
+
+	// enable the internal I/O decode
+	enables = pci_read_config8(dev, 0x6C);
+	enables |= 0x80;
+	pci_write_config8(dev, 0x6C, enables);
+	
+	// Map 4MB of FLASH into the address space
+	pci_write_config8(dev, 0x41, 0x7f);
+	
+	// Set bit 6 of 0x40, because Award does it (IO recovery time)
+	// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI 
+	// interrupts can be properly marked as level triggered.
+	enables = pci_read_config8(dev, 0x40);
+	pci_write_config8(dev, 0x40, enables);
+	
+	// Set 0x42 to 0xf0 to match Award bios
+	enables = pci_read_config8(dev, 0x42);
+	enables |= 0xf0;
+	pci_write_config8(dev, 0x42, enables);
+	
+	// Set bit 3 of 0x4a, to match award (dummy pci request)
+	enables = pci_read_config8(dev, 0x4a);
+	enables |= 0x08;
+	pci_write_config8(dev, 0x4a, enables);
+	
+	// Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
+	enables = pci_read_config8(dev, 0x4f);
+	enables |= 0x08;
+	pci_write_config8(dev, 0x4f, enables);
+	
+	// Set 0x58 to 0x03 to match Award
+	pci_write_config8(dev, 0x58, 0x03);
+	
+	// enable the ethernet/RTC
+	if (dev) {
+		enables = pci_read_config8(dev, 0x51);
+		enables |= 0x18; 
+		pci_write_config8(dev, 0x51, enables);
+	}
+
+	// enable IDE, since Linux won't do it.
+	// First do some more things to devfn (17,0)
+	// note: this should already be cleared, according to the book. 
+	enables = pci_read_config8(dev, 0x50);
+	printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
+	enables &= ~8; // need manifest constant here!
+	printk_debug("set IDE reg. 50 to 0x%x\n", enables);
+	pci_write_config8(dev, 0x50, enables);
+	
+	// set default interrupt values (IDE)
+	enables = pci_read_config8(dev, 0x4c);
+	printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
+	// clear out whatever was there. 
+	enables &= ~0xf;
+	enables |= 4;
+	printk_debug("setting reg. 4c to 0x%x\n", enables);
+	pci_write_config8(dev, 0x4c, enables);
+	
+	// set up the serial port interrupts. 
+	// com2 to 3, com1 to 4
+	pci_write_config8(dev, 0x46, 0x04);
+	pci_write_config8(dev, 0x47, 0x03);
+	pci_write_config8(dev, 0x6e, 0x98);
+
+	/* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
+	pci_write_config8(dev, 0x40, 0x54);
+	//ethernet_fixup();
+	
+	// Start the rtc
+	rtc_init(0);
+}
+
+static void southbridge_init(struct device *dev)
+{
+	vt8231_init(dev);
+	pci_routing_fixup(dev);
+}
+
+static struct device_operations vt8231_lpc_ops = {
+	.read_resources   = pci_dev_read_resources,
+	.set_resources    = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init		  = &southbridge_init,
+	.scan_bus	  = scan_static_bus,
+	.enable           = 0,
+	.ops_pci          = 0,
+};
+
+static struct pci_driver lpc_driver __pci_driver = {
+	.ops	= &vt8231_lpc_ops,
+	.vendor = PCI_VENDOR_ID_VIA,
+	.device = PCI_DEVICE_ID_VIA_8231,
+};