printk_foo -> printk(BIOS_FOO, ...)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 29 insertions, 29 deletions

diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c
index f384847d5c..228da0f948 100644
--- a/src/southbridge/via/vt8235/vt8235.c
+++ b/src/southbridge/via/vt8235/vt8235.c
@@ -14,7 +14,7 @@ static int enabled = 0;
 
 void hard_reset(void) 
 {
-	printk_err("NO HARD RESET ON VT8235! FIX ME!\n");
+	printk(BIOS_ERR, "NO HARD RESET ON VT8235! FIX ME!\n");
 }
 
 static void keyboard_on(struct device *dev)
@@ -34,11 +34,11 @@ void dump_south(device_t dev0)
 	int i,j;
 	
 	for(i = 0; i < 256; i += 16) {
-		printk_debug("0x%x: ", i);
+		printk(BIOS_DEBUG, "0x%x: ", i);
 		for(j = 0; j < 16; j++) {
-			printk_debug("%02x ", pci_read_config8(dev0, i+j));
+			printk(BIOS_DEBUG, "%02x ", pci_read_config8(dev0, i+j));
 		}
-		printk_debug("\n");
+		printk(BIOS_DEBUG, "\n");
 	}
 }
 
@@ -61,7 +61,7 @@ static void vt8235_enable(struct device *dev)
 	vendor = pci_read_config16(dev,0);
 	model = pci_read_config16(dev,0x2);
 
-	printk_debug("In vt8235_enable %04x %04x.\n",vendor,model);
+	printk(BIOS_DEBUG, "In vt8235_enable %04x %04x.\n",vendor,model);
 	
 	/* if this is not the southbridge itself just return */
 	/* this is necessary because USB devices are slot 10, whereas this device is slot 11 
@@ -70,7 +70,7 @@ static void vt8235_enable(struct device *dev)
 	if( (vendor != PCI_VENDOR_ID_VIA) || (model != PCI_DEVICE_ID_VIA_8235))
 		return;
 
-	printk_debug("Initialising Devices\n");
+	printk(BIOS_DEBUG, "Initialising Devices\n");
 
 
 	setup_i8259();   // make sure interupt controller is configured before keyboard init 
diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c
index 9c2af3c781..ec22f9053b 100644
--- a/src/southbridge/via/vt8235/vt8235_ide.c
+++ b/src/southbridge/via/vt8235/vt8235_ide.c
@@ -10,7 +10,7 @@ static void ide_init(struct device *dev)
 	struct southbridge_via_vt8235_config *conf = dev->chip_info;
 	unsigned char enables;
 
-	printk_info("Enabling VIA IDE.\n");
+	printk(BIOS_INFO, "Enabling VIA IDE.\n");
 
 	/*if (!conf->enable_native_ide) { */
 		/*
@@ -18,23 +18,23 @@ static void ide_init(struct device *dev)
 		 * use PCI interrupts.  Using PCI ints confuses linux for some
 		 * reason.
 		 */
-		printk_info("%s: enabling compatibility IDE addresses\n",
+		printk(BIOS_INFO, "%s: enabling compatibility IDE addresses\n",
 				__func__);
 		enables = pci_read_config8(dev, 0x42);
-		printk_debug("enables in reg 0x42 0x%x\n", enables);
+		printk(BIOS_DEBUG, "enables in reg 0x42 0x%x\n", enables);
 		enables &= ~0xc0;		// compatability mode
 		pci_write_config8(dev, 0x42, enables);
 		enables = pci_read_config8(dev, 0x42);
-		printk_debug("enables in reg 0x42 read back as 0x%x\n",
+		printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n",
 				enables);
 	/* } */
 	
 	enables = pci_read_config8(dev, 0x40);
-	printk_debug("enables in reg 0x40 0x%x\n", enables);
+	printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables);
 	enables |= 3;
 	pci_write_config8(dev, 0x40, enables);
 	enables = pci_read_config8(dev, 0x40);
-	printk_debug("enables in reg 0x40 read back as 0x%x\n", enables);
+	printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables);
 	
 	// Enable prefetch buffers
 	enables = pci_read_config8(dev, 0x41);
@@ -58,7 +58,7 @@ static void ide_init(struct device *dev)
 	// kevinh@ispiri.com - the standard linux drivers seem ass slow when 
 	// used in native mode - I've changed back to classic
 	enables = pci_read_config8(dev, 0x9);
-	printk_debug("enables in reg 0x9 0x%x\n", enables);
+	printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables);
 	// by the book, set the low-order nibble to 0xa. 
 	if (conf->enable_native_ide) {
 		enables &= ~0xf;
@@ -70,11 +70,11 @@ static void ide_init(struct device *dev)
 	
 	pci_write_config8(dev, 0x9, enables);
 	enables = pci_read_config8(dev, 0x9);
-	printk_debug("enables in reg 0x9 read back as 0x%x\n", enables);
+	printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables);
 	
 	// standard bios sets master bit. 
 	enables = pci_read_config8(dev, 0x4);
-	printk_debug("command in reg 0x4 0x%x\n", enables);
+	printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables);
 	enables |= 7;
 	
 	// No need for stepping - kevinh@ispiri.com
@@ -82,7 +82,7 @@ static void ide_init(struct device *dev)
 	
 	pci_write_config8(dev, 0x4, enables);
 	enables = pci_read_config8(dev, 0x4);
-	printk_debug("command in reg 0x4 reads back as 0x%x\n", enables);
+	printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables);
 	
 	if (!conf->enable_native_ide) {
 		// Use compatability mode - per award bios
diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c
index 052c4c9415..92ba973661 100644
--- a/src/southbridge/via/vt8235/vt8235_lpc.c
+++ b/src/southbridge/via/vt8235/vt8235_lpc.c
@@ -56,7 +56,7 @@ static unsigned char *pin_to_irq(const unsigned char *pin)
 
 static void pci_routing_fixup(struct device *dev)
 {
-	printk_info("%s: dev is %p\n", __func__, dev);
+	printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev);
 
 	/* set up PCI IRQ routing */
 	pci_write_config8(dev, 0x55, pciIrqs[0] << 4);
@@ -65,38 +65,38 @@ static void pci_routing_fixup(struct device *dev)
 
 
 	// firewire built into southbridge
-	printk_info("setting firewire\n");
+	printk(BIOS_INFO, "setting firewire\n");
 	pci_assign_irqs(0, 0x0d, pin_to_irq(firewirePins));
 
 	// Standard usb components
-	printk_info("setting usb\n");
+	printk(BIOS_INFO, "setting usb\n");
 	pci_assign_irqs(0, 0x10, pin_to_irq(usbPins));
 
 	// VT8235 + sound hardware
-	printk_info("setting vt8235\n");
+	printk(BIOS_INFO, "setting vt8235\n");
 	pci_assign_irqs(0, 0x11, pin_to_irq(vt8235Pins));
 
 	// Ethernet built into southbridge
-	printk_info("setting ethernet\n");
+	printk(BIOS_INFO, "setting ethernet\n");
 	pci_assign_irqs(0, 0x12, pin_to_irq(enetPins));
 
 	// VGA
-	printk_info("setting vga\n");
+	printk(BIOS_INFO, "setting vga\n");
 	pci_assign_irqs(1, 0x00, pin_to_irq(vgaPins));
 
 	// PCI slot
-	printk_info("setting pci slot\n");
+	printk(BIOS_INFO, "setting pci slot\n");
 	pci_assign_irqs(0, 0x14, pin_to_irq(slotPins));
 
 	// Cardbus slot 
-	printk_info("setting cardbus slot\n");
+	printk(BIOS_INFO, "setting cardbus slot\n");
 	pci_assign_irqs(0, 0x0a, pin_to_irq(cbPins));
 
 	// Via 2 slot riser card 2nd slot
-	printk_info("setting riser slot\n");
+	printk(BIOS_INFO, "setting riser slot\n");
 	pci_assign_irqs(0, 0x13, pin_to_irq(riserPins));
 
-	printk_spew("%s: DONE\n", __func__);
+	printk(BIOS_SPEW, "%s: DONE\n", __func__);
 }
 
 /* 
@@ -154,7 +154,7 @@ static void vt8235_init(struct device *dev)
 {
 	unsigned char enables;
 	
-	printk_debug("vt8235 init\n");
+	printk(BIOS_DEBUG, "vt8235 init\n");
 
 	// enable the internal I/O decode
 	enables = pci_read_config8(dev, 0x6C);
diff --git a/src/southbridge/via/vt8235/vt8235_nic.c b/src/southbridge/via/vt8235/vt8235_nic.c
index 09ea17e078..86fef895de 100644
--- a/src/southbridge/via/vt8235/vt8235_nic.c
+++ b/src/southbridge/via/vt8235/vt8235_nic.c
@@ -12,7 +12,7 @@ static void nic_init(struct device *dev)
 {
 	uint8_t	byte;
 
-	printk_debug("Configuring VIA Rhine LAN\n");
+	printk(BIOS_DEBUG, "Configuring VIA Rhine LAN\n");
 
 	/* We don't need stepping - though the device supports it */
 	byte = pci_read_config8(dev, PCI_COMMAND);
diff --git a/src/southbridge/via/vt8235/vt8235_usb.c b/src/southbridge/via/vt8235/vt8235_usb.c
index 2318465058..8b2a685807 100644
--- a/src/southbridge/via/vt8235/vt8235_usb.c
+++ b/src/southbridge/via/vt8235/vt8235_usb.c
@@ -9,7 +9,7 @@
 
 static void usb_init(struct device *dev)
 {
-	printk_debug("Configuring VIA USB 1.1\n");
+	printk(BIOS_DEBUG, "Configuring VIA USB 1.1\n");
 
 	/* pci_write_config8(dev, 0x04, 0x07); */