summaryrefslogtreecommitdiff
path: root/src/southbridge/via
diff options
context:
space:
mode:
authorTobias Diedrich <ranma+coreboot@tdiedrich.de>2010-11-07 18:28:34 +0000
committerRudolf Marek <r.marek@assembler.cz>2010-11-07 18:28:34 +0000
commit113b29f3c1b46b0aaefb740507245d5f7e9c3352 (patch)
tree6cb10f04f22b41ddd0705bf59485005ce7c66486 /src/southbridge/via
parentb9e16dffd3807ef713c891535bc13a9f92a4f649 (diff)
downloadcoreboot-113b29f3c1b46b0aaefb740507245d5f7e9c3352.tar.xz
This adds VT8237A specific VLINK/LPC init functions in vt8237_ctrl.c
and vt8237r_lpc.c. While vt8237a_vlink_init() in vt8237_ctrl.c is a modified vt8237r_vlink_init(), vt8237a_init() in vt8237r_lpc.c is a modified vt8237s_init(). Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6038 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/via')
-rw-r--r--src/southbridge/via/vt8237r/vt8237_ctrl.c75
-rw-r--r--src/southbridge/via/vt8237r/vt8237r_lpc.c62
2 files changed, 136 insertions, 1 deletions
diff --git a/src/southbridge/via/vt8237r/vt8237_ctrl.c b/src/southbridge/via/vt8237r/vt8237_ctrl.c
index 300cadec94..f3cc30ed88 100644
--- a/src/southbridge/via/vt8237r/vt8237_ctrl.c
+++ b/src/southbridge/via/vt8237r/vt8237_ctrl.c
@@ -168,6 +168,75 @@ static void vt8237s_vlink_init(struct device *dev)
}
+static void vt8237a_vlink_init(struct device *dev)
+{
+ u8 reg;
+ device_t devfun7;
+
+ devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_K8T890CE_7, 0);
+ if (!devfun7)
+ devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_K8M890CE_7, 0);
+ if (!devfun7)
+ devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_K8T890CF_7, 0);
+ /* No pairing NB was found. */
+ if (!devfun7)
+ return;
+
+ /*
+ * This init code is valid only for the VT8237A! For different
+ * sounthbridges (e.g. VT8237S, VT8237R and VT8251) a different
+ * init code is required.
+ *
+ * FIXME: This is based on vt8237r_vlink_init() in
+ * k8t890/k8t890_ctrl.c and modified to fit what the AMI
+ * BIOS on my M2V wrote to these registers (by looking
+ * at lspci -nxxx output).
+ * Works for me.
+ */
+
+ /* disable auto disconnect */
+ reg = pci_read_config8(devfun7, 0x42);
+ reg &= ~0x4;
+ pci_write_config8(devfun7, 0x42, reg);
+
+ /* NB part setup */
+ pci_write_config8(devfun7, 0xb5, 0x88);
+ pci_write_config8(devfun7, 0xb6, 0x88);
+ pci_write_config8(devfun7, 0xb7, 0x61);
+
+ reg = pci_read_config8(devfun7, 0xb4);
+ reg |= 0x11;
+ pci_write_config8(devfun7, 0xb4, reg);
+
+ pci_write_config8(devfun7, 0xb0, 0x6);
+ pci_write_config8(devfun7, 0xb1, 0x1);
+
+ /* SB part setup */
+ pci_write_config8(dev, 0xb7, 0x50);
+ pci_write_config8(dev, 0xb9, 0x88);
+ pci_write_config8(dev, 0xba, 0x8a);
+ pci_write_config8(dev, 0xbb, 0x88);
+
+ reg = pci_read_config8(dev, 0xbd);
+ reg |= 0x3;
+ reg &= ~0x4;
+ pci_write_config8(dev, 0xbd, reg);
+
+ reg = pci_read_config8(dev, 0xbc);
+ reg &= ~0x7;
+ pci_write_config8(dev, 0xbc, reg);
+
+ pci_write_config8(dev, 0x48, 0x23);
+
+ /* enable auto disconnect, for STPGNT and HALT */
+ reg = pci_read_config8(devfun7, 0x42);
+ reg |= 0x7;
+ pci_write_config8(devfun7, 0x42, reg);
+}
+
static void ctrl_enable(struct device *dev)
{
/* Enable the 0:13 and 0:13.1. */
@@ -193,6 +262,12 @@ static void ctrl_init(struct device *dev)
vt8237s_vlink_init(dev);
}
+ devsb = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237A_LPC, 0);
+ if (devsb) {
+ vt8237a_vlink_init(dev);
+ }
+
/* Configure PCI1 and copy mirror registers from D0F3. */
vt8237_cfg(dev);
dump_south(dev);
diff --git a/src/southbridge/via/vt8237r/vt8237r_lpc.c b/src/southbridge/via/vt8237r/vt8237r_lpc.c
index 1a136c906e..24865f6a29 100644
--- a/src/southbridge/via/vt8237r/vt8237r_lpc.c
+++ b/src/southbridge/via/vt8237r/vt8237r_lpc.c
@@ -319,6 +319,58 @@ static void vt8237r_init(struct device *dev)
printk(BIOS_SPEW, "Leaving %s.\n", __func__);
}
+static void vt8237a_init(struct device *dev)
+{
+ /*
+ * FIXME: This is based on vt8237s_init() and the values the AMI
+ * BIOS on my M2V wrote to these registers (by loking
+ * at lspci -nxxx output).
+ * Works for me.
+ */
+ u32 tmp;
+
+ /* Set bit 3 of 0x4f (use INIT# as CPU reset). */
+ tmp = pci_read_config8(dev, 0x4f);
+ tmp |= 0x08;
+ pci_write_config8(dev, 0x4f, tmp);
+
+ /*
+ * bit2: REQ5 as PCI request input - should be together with INTE-INTH.
+ * bit5: usb power control lines as gpio
+ */
+ pci_write_config8(dev, 0xe4, 0x24);
+ /*
+ * Enable APIC wakeup from INTH
+ * Enable SATA LED, disable special CPU Frequency Change -
+ * GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
+ */
+ pci_write_config8(dev, 0xe5, 0x69);
+
+ /* Reduce further the STPCLK/LDTSTP signal to 5us. */
+ pci_write_config8(dev, 0xec, 0x4);
+
+ /* Host Bus Power Management Control, maybe not needed */
+ pci_write_config8(dev, 0x8c, 0x5);
+
+ /* Enable HPET at VT8237R_HPET_ADDR. */
+ pci_write_config32(dev, 0x68, (VT8237R_HPET_ADDR | 0x80));
+
+ southbridge_init_common(dev);
+
+ /* Share INTE-INTH with INTA-INTD for simplicity */
+ pci_write_config8(dev, 0x46, 0x00);
+
+ /* FIXME: Intel needs more bit set for C2/C3. */
+
+ /*
+ * Allow SLP# signal to assert LDTSTOP_L.
+ * Will work for C3 and for FID/VID change.
+ */
+ outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
+
+ dump_south(dev);
+}
+
static void vt8237s_init(struct device *dev)
{
u32 tmp;
@@ -537,6 +589,14 @@ static const struct device_operations vt8237r_lpc_ops_r = {
.scan_bus = scan_static_bus,
};
+static const struct device_operations vt8237r_lpc_ops_a = {
+ .read_resources = vt8237r_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = vt8237a_init,
+ .scan_bus = scan_static_bus,
+};
+
static const struct pci_driver lpc_driver_r __pci_driver = {
.ops = &vt8237r_lpc_ops_r,
.vendor = PCI_VENDOR_ID_VIA,
@@ -544,7 +604,7 @@ static const struct pci_driver lpc_driver_r __pci_driver = {
};
static const struct pci_driver lpc_driver_a __pci_driver = {
- .ops = &vt8237r_lpc_ops_r,
+ .ops = &vt8237r_lpc_ops_a,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VT8237A_LPC,
};