summaryrefslogtreecommitdiff
path: root/src/southbridge/via
diff options
context:
space:
mode:
authorEric Biederman <ebiederm@xmission.com>2003-10-11 06:20:25 +0000
committerEric Biederman <ebiederm@xmission.com>2003-10-11 06:20:25 +0000
commit83b991afff40e12a8b6756af06a472842edb1a66 (patch)
treea441ff0d88afcb0a07cf22dc3653db3e07a05c98 /src/southbridge/via
parent080038bfbd8fdf08bac12476a3789495e6f705ca (diff)
downloadcoreboot-83b991afff40e12a8b6756af06a472842edb1a66.tar.xz
- O2, enums, and switch statements work in romcc
- Support for compiling romcc on non x86 platforms - new romc options -msse and -mmmx for specifying extra registers to use - Bug fixes to device the device disable/enable framework and an amd8111 implementation - Move the link specification to the chip specification instead of the path - Allow specifying devices with internal bridges. - Initial via epia support - Opteron errata fixes git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/via')
-rw-r--r--src/southbridge/via/vt8231/chip.h14
-rw-r--r--src/southbridge/via/vt8231/vt8231.c708
-rw-r--r--src/southbridge/via/vt8231/vt8231_early_serial.c107
-rw-r--r--src/southbridge/via/vt8231/vt8231_early_smbus.c316
4 files changed, 568 insertions, 577 deletions
diff --git a/src/southbridge/via/vt8231/chip.h b/src/southbridge/via/vt8231/chip.h
index 0ae3b98c63..fe3d332675 100644
--- a/src/southbridge/via/vt8231/chip.h
+++ b/src/southbridge/via/vt8231/chip.h
@@ -9,13 +9,13 @@ struct southbridge_via_vt8231_config {
/* I am putting in IDE as an example but obviously this needs
* to be more complete!
*/
- int enable_ide;
- /* enables of functions of devices */
- int enable_usb;
- int enable_native_ide;
- int enable_com_ports;
- int enable_keyboard;
- int enable_nvram;
+ int enable_ide;
+ /* enables of functions of devices */
+ int enable_usb;
+ int enable_native_ide;
+ int enable_com_ports;
+ int enable_keyboard;
+ int enable_nvram;
};
#endif /* _SOUTHBRIDGE_VIA_VT8231 */
diff --git a/src/southbridge/via/vt8231/vt8231.c b/src/southbridge/via/vt8231/vt8231.c
index 470ab5acf1..ea1f488f3e 100644
--- a/src/southbridge/via/vt8231/vt8231.c
+++ b/src/southbridge/via/vt8231/vt8231.c
@@ -11,101 +11,94 @@
void pc_keyboard_init(void);
-void
-hard_reset() {
- printk_err("NO HARD RESET ON VT8231! FIX ME!\n");
+void hard_reset(void)
+{
+ printk_err("NO HARD RESET ON VT8231! FIX ME!\n");
}
+
static void usb_on(int enable)
{
-
- unsigned char regval;
-
- /* Base 8231 controller */
- device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, \
- PCI_DEVICE_ID_VIA_8231, 0);
- /* USB controller 1 */
- device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, \
- PCI_DEVICE_ID_VIA_82C586_2, 0);
- /* USB controller 2 */
- device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA, \
- PCI_DEVICE_ID_VIA_82C586_2, \
- dev2);
-
- /* enable USB1 */
- if(dev2) {
- if (enable) {
- pci_write_config8(dev2, 0x3c, 0x05);
- pci_write_config8(dev2, 0x04, 0x07);
- } else {
- pci_write_config8(dev2, 0x3c, 0x00);
- pci_write_config8(dev2, 0x04, 0x00);
- }
- }
-
- if(dev0) {
- regval = pci_read_config8(dev0, 0x50);
- if (enable)
- regval &= ~(0x10);
- else
- regval |= 0x10;
- pci_write_config8(dev0, 0x50, regval);
- }
-
- /* enable USB2 */
- if(dev3) {
- if (enable) {
- pci_write_config8(dev3, 0x3c, 0x05);
- pci_write_config8(dev3, 0x04, 0x07);
- } else {
- pci_write_config8(dev3, 0x3c, 0x00);
- pci_write_config8(dev3, 0x04, 0x00);
- }
- }
-
- if(dev0) {
- regval = pci_read_config8(dev0, 0x50);
- if (enable)
- regval &= ~(0x20);
- else
- regval |= 0x20;
- pci_write_config8(dev0, 0x50, regval);
- }
-
+ unsigned char regval;
+
+ /* Base 8231 controller */
+ device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ /* USB controller 1 */
+ device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 0);
+ /* USB controller 2 */
+ device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev2);
+
+ /* enable USB1 */
+ if(dev2) {
+ if (enable) {
+ pci_write_config8(dev2, 0x3c, 0x05);
+ pci_write_config8(dev2, 0x04, 0x07);
+ } else {
+ pci_write_config8(dev2, 0x3c, 0x00);
+ pci_write_config8(dev2, 0x04, 0x00);
+ }
+ }
+
+ if(dev0) {
+ regval = pci_read_config8(dev0, 0x50);
+ if (enable)
+ regval &= ~(0x10);
+ else
+ regval |= 0x10;
+ pci_write_config8(dev0, 0x50, regval);
+ }
+
+ /* enable USB2 */
+ if(dev3) {
+ if (enable) {
+ pci_write_config8(dev3, 0x3c, 0x05);
+ pci_write_config8(dev3, 0x04, 0x07);
+ } else {
+ pci_write_config8(dev3, 0x3c, 0x00);
+ pci_write_config8(dev3, 0x04, 0x00);
+ }
+ }
+
+ if(dev0) {
+ regval = pci_read_config8(dev0, 0x50);
+ if (enable)
+ regval &= ~(0x20);
+ else
+ regval |= 0x20;
+ pci_write_config8(dev0, 0x50, regval);
+ }
}
-static void keyboard_on()
+static void keyboard_on(void)
{
- unsigned char regval;
-
- /* Base 8231 controller */
- device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, \
- PCI_DEVICE_ID_VIA_8231, 0);
-
- /* kevinh/Ispiri - update entire function to use
- new pci_write_config8 */
-
- if (dev0) {
- regval = pci_read_config8(dev0, 0x51);
- regval |= 0x0f;
- pci_write_config8(dev0, 0x51, regval);
- }
- pc_keyboard_init();
+ unsigned char regval;
+
+ /* Base 8231 controller */
+ device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+
+ /* kevinh/Ispiri - update entire function to use
+ new pci_write_config8 */
+ if (dev0) {
+ regval = pci_read_config8(dev0, 0x51);
+ regval |= 0x0f;
+ pci_write_config8(dev0, 0x51, regval);
+ }
+ pc_keyboard_init();
}
-static void nvram_on()
+static void nvram_on(void)
{
- /*
- * the VIA 8231 South has a very different nvram setup than the
- * piix4e ...
- * turn on ProMedia nvram.
- * TO DO: use the PciWriteByte function here.
- */
-
- /*
- * kevinh/Ispiri - I don't think this is the correct address/value
- * intel_conf_writeb(0x80008841, 0xFF);
- */
+ /*
+ * the VIA 8231 South has a very different nvram setup than the
+ * piix4e ...
+ * turn on ProMedia nvram.
+ * TO DO: use the PciWriteByte function here.
+ */
+
+ /*
+ * kevinh/Ispiri - I don't think this is the correct address/value
+ * intel_conf_writeb(0x80008841, 0xFF);
+ */
}
@@ -115,22 +108,22 @@ static void nvram_on()
*/
static void ethernet_fixup()
{
- device_t edev;
- uint8_t byte;
-
- printk_info("Ethernet fixup\n");
-
- edev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_7, 0);
- if (edev) {
- printk_debug("Configuring VIA LAN\n");
-
- /* We don't need stepping - though the device supports it */
- byte = pci_read_config8(edev, PCI_COMMAND);
- byte &= ~PCI_COMMAND_WAIT;
- pci_write_config8(edev, PCI_COMMAND, byte);
- } else {
- printk_debug("VIA LAN not found\n");
- }
+ device_t edev;
+ uint8_t byte;
+
+ printk_info("Ethernet fixup\n");
+
+ edev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_7, 0);
+ if (edev) {
+ printk_debug("Configuring VIA LAN\n");
+
+ /* We don't need stepping - though the device supports it */
+ byte = pci_read_config8(edev, PCI_COMMAND);
+ byte &= ~PCI_COMMAND_WAIT;
+ pci_write_config8(edev, PCI_COMMAND, byte);
+ } else {
+ printk_debug("VIA LAN not found\n");
+ }
}
@@ -145,13 +138,14 @@ static void ethernet_fixup()
* (e.g. device_t). This needs to get fixed. We need low-level pci scans
* in the C code.
*/
-static void vt8231_pci_enable(struct southbridge_via_vt8231_config *conf) {
- /*
- unsigned long busdevfn = 0x8000;
- if (conf->enable_ide) {
- printk_debug("%s: enabling IDE function\n", __FUNCTION__);
- }
- */
+static void vt8231_pci_enable(struct southbridge_via_vt8231_config *conf)
+{
+ /*
+ unsigned long busdevfn = 0x8000;
+ if (conf->enable_ide) {
+ printk_debug("%s: enabling IDE function\n", __FUNCTION__);
+ }
+ */
}
/* PIRQ init
@@ -170,7 +164,7 @@ static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
*/
static void pci_routing_fixup(void)
{
- device_t dev;
+ device_t dev;
dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
printk_info("%s: dev is %p\n", __FUNCTION__, dev);
@@ -204,260 +198,258 @@ static void pci_routing_fixup(void)
void
-dump_south(void){
- device_t dev0;
- dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
- int i,j;
-
- for(i = 0; i < 256; i += 16) {
- printk_debug("0x%x: ", i);
- for(j = 0; j < 16; j++) {
- printk_debug("%02x ", pci_read_config8(dev0, i+j));
- }
- printk_debug("\n");
- }
+dump_south(void)
+{
+ device_t dev0;
+ dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ int i,j;
+
+ for(i = 0; i < 256; i += 16) {
+ printk_debug("0x%x: ", i);
+ for(j = 0; j < 16; j++) {
+ printk_debug("%02x ", pci_read_config8(dev0, i+j));
+ }
+ printk_debug("\n");
+ }
}
static void vt8231_init(struct southbridge_via_vt8231_config *conf)
{
- unsigned char enables;
- device_t dev0;
- device_t dev1;
- device_t devpwr;
-
- // to do: use the pcibios_find function here, instead of
- // hard coding the devfn.
- // done - kevinh/Ispiri
- printk_debug("vt8231 init\n");
- /* Base 8231 controller */
- dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
- /* IDE controller */
- dev1 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, \
- 0);
- /* Power management controller */
- devpwr = dev_find_device(PCI_VENDOR_ID_VIA, \
- PCI_DEVICE_ID_VIA_8231_4, 0);
-
- // enable the internal I/O decode
- enables = pci_read_config8(dev0, 0x6C);
- enables |= 0x80;
- pci_write_config8(dev0, 0x6C, enables);
-
- // Map 4MB of FLASH into the address space
- pci_write_config8(dev0, 0x41, 0x7f);
-
- // Set bit 6 of 0x40, because Award does it (IO recovery time)
- // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
- // interrupts can be properly marked as level triggered.
- enables = pci_read_config8(dev0, 0x40);
- pci_write_config8(dev0, 0x40, enables);
-
- // Set 0x42 to 0xf0 to match Award bios
- enables = pci_read_config8(dev0, 0x42);
- enables |= 0xf0;
- pci_write_config8(dev0, 0x42, enables);
-
- // Set bit 3 of 0x4a, to match award (dummy pci request)
- enables = pci_read_config8(dev0, 0x4a);
- enables |= 0x08;
- pci_write_config8(dev0, 0x4a, enables);
-
- // Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
- enables = pci_read_config8(dev0, 0x4f);
- enables |= 0x08;
- pci_write_config8(dev0, 0x4f, enables);
-
- // Set 0x58 to 0x03 to match Award
- pci_write_config8(dev0, 0x58, 0x03);
-
- // enable the ethernet/RTC
- if(dev0) {
- enables = pci_read_config8(dev0, 0x51);
- enables |= 0x18;
- pci_write_config8(dev0, 0x51, enables);
- }
-
-
- // enable com1 and com2.
- if (conf->enable_com_ports) {
- enables = pci_read_config8(dev0, 0x6e);
-
- /* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
- * is enable com port a as com1 kevinh/Ispiri - Old code
- * thought 0x01 would make it com1, that was wrong enables =
- * 0x80 | 0x10 | 0x8 ; pci_write_config8(dev0, 0x6e,
- * enables); // note: this is also a redo of some port of
- * assembly, but we want everything up.
- */
-
- /* set com1 to 115 kbaud not clear how to do this yet.
- * forget it; done in assembly.
- */
-
- }
- // enable IDE, since Linux won't do it.
- // First do some more things to devfn (17,0)
- // note: this should already be cleared, according to the book.
- enables = pci_read_config8(dev0, 0x50);
- printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
- enables &= ~8; // need manifest constant here!
- printk_debug("set IDE reg. 50 to 0x%x\n", enables);
- pci_write_config8(dev0, 0x50, enables);
-
- // set default interrupt values (IDE)
- enables = pci_read_config8(dev0, 0x4c);
- printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
- // clear out whatever was there.
- enables &= ~0xf;
- enables |= 4;
- printk_debug("setting reg. 4c to 0x%x\n", enables);
- pci_write_config8(dev0, 0x4c, enables);
-
- // set up the serial port interrupts.
- // com2 to 3, com1 to 4
- pci_write_config8(dev0, 0x46, 0x04);
- pci_write_config8(dev0, 0x47, 0x03);
- pci_write_config8(dev0, 0x6e, 0x98);
- //
- // Power management setup
- //
- // Set ACPI base address to IO 0x4000
- pci_write_config32(devpwr, 0x48, 0x4001);
-
- // Enable ACPI access (and setup like award)
- pci_write_config8(devpwr, 0x41, 0x84);
-
- // Set hardware monitor base address to IO 0x6000
- pci_write_config32(devpwr, 0x70, 0x6001);
-
- // Enable hardware monitor (and setup like award)
- pci_write_config8(devpwr, 0x74, 0x01);
-
- // set IO base address to 0x5000
- pci_write_config32(devpwr, 0x90, 0x5001);
-
- // Enable SMBus
- pci_write_config8(devpwr, 0xd2, 0x01);
-
- //
- // IDE setup
- //
- if (conf->enable_native_ide) {
- // Run the IDE controller in 'compatiblity mode - i.e. don't use PCI
- // interrupts. Using PCI ints confuses linux for some reason.
-
- printk_info("%s: enabling native IDE addresses\n", __FUNCTION__);
- enables = pci_read_config8(dev1, 0x42);
- printk_debug("enables in reg 0x42 0x%x\n", enables);
- enables &= ~0xc0; // compatability mode
- pci_write_config8(dev1, 0x42, enables);
- enables = pci_read_config8(dev1, 0x42);
- printk_debug("enables in reg 0x42 read back as 0x%x\n", enables);
- }
-
- enables = pci_read_config8(dev1, 0x40);
- printk_debug("enables in reg 0x40 0x%x\n", enables);
- enables |= 3;
- pci_write_config8(dev1, 0x40, enables);
- enables = pci_read_config8(dev1, 0x40);
- printk_debug("enables in reg 0x40 read back as 0x%x\n", enables);
-
- // Enable prefetch buffers
- enables = pci_read_config8(dev1, 0x41);
- enables |= 0xf0;
- pci_write_config8(dev1, 0x41, enables);
-
- // Lower thresholds (cause award does it)
- enables = pci_read_config8(dev1, 0x43);
- enables &= ~0x0f;
- enables |= 0x05;
- pci_write_config8(dev1, 0x43, enables);
-
- // PIO read prefetch counter (cause award does it)
- pci_write_config8(dev1, 0x44, 0x18);
-
- // Use memory read multiple
- pci_write_config8(dev1, 0x45, 0x1c);
-
- // address decoding.
- // we want "flexible", i.e. 1f0-1f7 etc. or native PCI
- // kevinh@ispiri.com - the standard linux drivers seem ass slow when
- // used in native mode - I've changed back to classic
- enables = pci_read_config8(dev1, 0x9);
- printk_debug("enables in reg 0x9 0x%x\n", enables);
- // by the book, set the low-order nibble to 0xa.
- if (conf->enable_native_ide) {
- enables &= ~0xf;
- // cf/cg silicon needs an 'f' here.
- enables |= 0xf;
- } else {
- enables &= ~0x5;
- }
-
- pci_write_config8(dev1, 0x9, enables);
- enables = pci_read_config8(dev1, 0x9);
- printk_debug("enables in reg 0x9 read back as 0x%x\n", enables);
-
- // standard bios sets master bit.
- enables = pci_read_config8(dev1, 0x4);
- printk_debug("command in reg 0x4 0x%x\n", enables);
- enables |= 7;
-
- // No need for stepping - kevinh@ispiri.com
- enables &= ~0x80;
-
- pci_write_config8(dev1, 0x4, enables);
- enables = pci_read_config8(dev1, 0x4);
- printk_debug("command in reg 0x4 reads back as 0x%x\n", enables);
-
- if (! conf->enable_native_ide) {
- // Use compatability mode - per award bios
- pci_write_config32(dev1, 0x10, 0x0);
- pci_write_config32(dev1, 0x14, 0x0);
- pci_write_config32(dev1, 0x18, 0x0);
- pci_write_config32(dev1, 0x1c, 0x0);
-
- // Force interrupts to use compat mode - just like Award bios
- pci_write_config8(dev1, 0x3d, 00);
- pci_write_config8(dev1, 0x3c, 0xff);
- }
-
-
- /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
- pci_write_config8(dev0, 0x40, 0x54);
- ethernet_fixup();
-
- // Start the rtc
- rtc_init(0);
+ unsigned char enables;
+ device_t dev0;
+ device_t dev1;
+ device_t devpwr;
+
+ // to do: use the pcibios_find function here, instead of
+ // hard coding the devfn.
+ // done - kevinh/Ispiri
+ printk_debug("vt8231 init\n");
+ /* Base 8231 controller */
+ dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ /* IDE controller */
+ dev1 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, 0);
+ /* Power management controller */
+ devpwr = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4, 0);
+
+ // enable the internal I/O decode
+ enables = pci_read_config8(dev0, 0x6C);
+ enables |= 0x80;
+ pci_write_config8(dev0, 0x6C, enables);
+
+ // Map 4MB of FLASH into the address space
+ pci_write_config8(dev0, 0x41, 0x7f);
+
+ // Set bit 6 of 0x40, because Award does it (IO recovery time)
+ // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
+ // interrupts can be properly marked as level triggered.
+ enables = pci_read_config8(dev0, 0x40);
+ pci_write_config8(dev0, 0x40, enables);
+
+ // Set 0x42 to 0xf0 to match Award bios
+ enables = pci_read_config8(dev0, 0x42);
+ enables |= 0xf0;
+ pci_write_config8(dev0, 0x42, enables);
+
+ // Set bit 3 of 0x4a, to match award (dummy pci request)
+ enables = pci_read_config8(dev0, 0x4a);
+ enables |= 0x08;
+ pci_write_config8(dev0, 0x4a, enables);
+
+ // Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
+ enables = pci_read_config8(dev0, 0x4f);
+ enables |= 0x08;
+ pci_write_config8(dev0, 0x4f, enables);
+
+ // Set 0x58 to 0x03 to match Award
+ pci_write_config8(dev0, 0x58, 0x03);
+
+ // enable the ethernet/RTC
+ if(dev0) {
+ enables = pci_read_config8(dev0, 0x51);
+ enables |= 0x18;
+ pci_write_config8(dev0, 0x51, enables);
+ }
+
+
+ // enable com1 and com2.
+ if (conf->enable_com_ports) {
+ enables = pci_read_config8(dev0, 0x6e);
+
+ /* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
+ * is enable com port a as com1 kevinh/Ispiri - Old code
+ * thought 0x01 would make it com1, that was wrong enables =
+ * 0x80 | 0x10 | 0x8 ; pci_write_config8(dev0, 0x6e,
+ * enables); // note: this is also a redo of some port of
+ * assembly, but we want everything up.
+ */
+
+ /* set com1 to 115 kbaud not clear how to do this yet.
+ * forget it; done in assembly.
+ */
+
+ }
+ // enable IDE, since Linux won't do it.
+ // First do some more things to devfn (17,0)
+ // note: this should already be cleared, according to the book.
+ enables = pci_read_config8(dev0, 0x50);
+ printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
+ enables &= ~8; // need manifest constant here!
+ printk_debug("set IDE reg. 50 to 0x%x\n", enables);
+ pci_write_config8(dev0, 0x50, enables);
+
+ // set default interrupt values (IDE)
+ enables = pci_read_config8(dev0, 0x4c);
+ printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
+ // clear out whatever was there.
+ enables &= ~0xf;
+ enables |= 4;
+ printk_debug("setting reg. 4c to 0x%x\n", enables);
+ pci_write_config8(dev0, 0x4c, enables);
+
+ // set up the serial port interrupts.
+ // com2 to 3, com1 to 4
+ pci_write_config8(dev0, 0x46, 0x04);
+ pci_write_config8(dev0, 0x47, 0x03);
+ pci_write_config8(dev0, 0x6e, 0x98);
+ //
+ // Power management setup
+ //
+ // Set ACPI base address to IO 0x4000
+ pci_write_config32(devpwr, 0x48, 0x4001);
+
+ // Enable ACPI access (and setup like award)
+ pci_write_config8(devpwr, 0x41, 0x84);
+
+ // Set hardware monitor base address to IO 0x6000
+ pci_write_config32(devpwr, 0x70, 0x6001);
+
+ // Enable hardware monitor (and setup like award)
+ pci_write_config8(devpwr, 0x74, 0x01);
+
+ // set IO base address to 0x5000
+ pci_write_config32(devpwr, 0x90, 0x5001);
+
+ // Enable SMBus
+ pci_write_config8(devpwr, 0xd2, 0x01);
+
+ //
+ // IDE setup
+ //
+ if (conf->enable_native_ide) {
+ // Run the IDE controller in 'compatiblity mode - i.e. don't use PCI
+ // interrupts. Using PCI ints confuses linux for some reason.
+
+ printk_info("%s: enabling native IDE addresses\n", __FUNCTION__);
+ enables = pci_read_config8(dev1, 0x42);
+ printk_debug("enables in reg 0x42 0x%x\n", enables);
+ enables &= ~0xc0; // compatability mode
+ pci_write_config8(dev1, 0x42, enables);
+ enables = pci_read_config8(dev1, 0x42);
+ printk_debug("enables in reg 0x42 read back as 0x%x\n", enables);
+ }
+
+ enables = pci_read_config8(dev1, 0x40);
+ printk_debug("enables in reg 0x40 0x%x\n", enables);
+ enables |= 3;
+ pci_write_config8(dev1, 0x40, enables);
+ enables = pci_read_config8(dev1, 0x40);
+ printk_debug("enables in reg 0x40 read back as 0x%x\n", enables);
+
+ // Enable prefetch buffers
+ enables = pci_read_config8(dev1, 0x41);
+ enables |= 0xf0;
+ pci_write_config8(dev1, 0x41, enables);
+
+ // Lower thresholds (cause award does it)
+ enables = pci_read_config8(dev1, 0x43);
+ enables &= ~0x0f;
+ enables |= 0x05;
+ pci_write_config8(dev1, 0x43, enables);
+
+ // PIO read prefetch counter (cause award does it)
+ pci_write_config8(dev1, 0x44, 0x18);
+
+ // Use memory read multiple
+ pci_write_config8(dev1, 0x45, 0x1c);
+
+ // address decoding.
+ // we want "flexible", i.e. 1f0-1f7 etc. or native PCI
+ // kevinh@ispiri.com - the standard linux drivers seem ass slow when
+ // used in native mode - I've changed back to classic
+ enables = pci_read_config8(dev1, 0x9);
+ printk_debug("enables in reg 0x9 0x%x\n", enables);
+ // by the book, set the low-order nibble to 0xa.
+ if (conf->enable_native_ide) {
+ enables &= ~0xf;
+ // cf/cg silicon needs an 'f' here.
+ enables |= 0xf;
+ } else {
+ enables &= ~0x5;
+ }
+
+ pci_write_config8(dev1, 0x9, enables);
+ enables = pci_read_config8(dev1, 0x9);
+ printk_debug("enables in reg 0x9 read back as 0x%x\n", enables);
+
+ // standard bios sets master bit.
+ enables = pci_read_config8(dev1, 0x4);
+ printk_debug("command in reg 0x4 0x%x\n", enables);
+ enables |= 7;
+
+ // No need for stepping - kevinh@ispiri.com
+ enables &= ~0x80;
+
+ pci_write_config8(dev1, 0x4, enables);
+ enables = pci_read_config8(dev1, 0x4);
+ printk_debug("command in reg 0x4 reads back as 0x%x\n", enables);
+
+ if (! conf->enable_native_ide) {
+ // Use compatability mode - per award bios
+ pci_write_config32(dev1, 0x10, 0x0);
+ pci_write_config32(dev1, 0x14, 0x0);
+ pci_write_config32(dev1, 0x18, 0x0);
+ pci_write_config32(dev1, 0x1c, 0x0);
+
+ // Force interrupts to use compat mode - just like Award bios
+ pci_write_config8(dev1, 0x3d, 00);
+ pci_write_config8(dev1, 0x3c, 0xff);
+ }
+
+
+ /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
+ pci_write_config8(dev0, 0x40, 0x54);
+ ethernet_fixup();
+
+ // Start the rtc
+ rtc_init(0);
}
-static void
-southbridge_init(struct chip *chip, enum chip_pass pass)
+static void southbridge_init(struct chip *chip, enum chip_pass pass)
{
- struct southbridge_via_vt8231_config *conf =
- (struct southbridge_via_vt8231_config *)chip->chip_info;
-
- switch (pass) {
- case CONF_PASS_PRE_PCI:
- vt8231_pci_enable(conf);
- break;
-
- case CONF_PASS_POST_PCI:
- vt8231_init(conf);
- printk_err("FUCK! ROUTING FIXUP!\n");
- pci_routing_fixup();
-
- break;
- case CONF_PASS_PRE_BOOT:
- pci_routing_fixup();
- dump_south();
- break;
-
- default:
- /* nothing yet */
- break;
- }
+ struct southbridge_via_vt8231_config *conf =
+ (struct southbridge_via_vt8231_config *)chip->chip_info;
+
+ switch (pass) {
+ case CONF_PASS_PRE_PCI:
+ vt8231_pci_enable(conf);
+ break;
+
+ case CONF_PASS_POST_PCI:
+ vt8231_init(conf);
+ printk_err("FUCK! ROUTING FIXUP!\n");
+ pci_routing_fixup();
+
+ break;
+ case CONF_PASS_PRE_BOOT:
+ pci_routing_fixup();
+ dump_south();
+ break;
+
+ default:
+ /* nothing yet */
+ break;
+ }
}
static void enumerate(struct chip *chip)
@@ -468,7 +460,7 @@ static void enumerate(struct chip *chip)
}
struct chip_control southbridge_via_vt8231_control = {
- .enumerate = enumerate,
- enable: southbridge_init,
- name: "VIA vt8231"
+ .enumerate = enumerate,
+ .enable = southbridge_init,
+ .name = "VIA vt8231"
};
diff --git a/src/southbridge/via/vt8231/vt8231_early_serial.c b/src/southbridge/via/vt8231/vt8231_early_serial.c
index ca7831df42..1bfffed7f5 100644
--- a/src/southbridge/via/vt8231/vt8231_early_serial.c
+++ b/src/southbridge/via/vt8231/vt8231_early_serial.c
@@ -8,20 +8,20 @@
#define SIO_BASE 0x3f0
#define SIO_DATA SIO_BASE+1
-static void
-vt8231_writesuper(uint8_t reg, uint8_t val) {
- outb(reg, SIO_BASE);
- outb(val, SIO_DATA);
+static void vt8231_writesuper(uint8_t reg, uint8_t val)
+{
+ outb(reg, SIO_BASE);
+ outb(val, SIO_DATA);
}
-static void
-vt8231_writesiobyte(uint16_t reg, uint8_t val) {
- outb(val, reg);
+static void vt8231_writesiobyte(uint16_t reg, uint8_t val)
+{
+ outb(val, reg);
}
-static void
-vt8231_writesioword(uint16_t reg, uint16_t val) {
- outw(val, reg);
+static void vt8231_writesioword(uint16_t reg, uint16_t val)
+{
+ outw(val, reg);
}
@@ -29,48 +29,47 @@ vt8231_writesioword(uint16_t reg, uint16_t val) {
mainboard
*/
-static void
-enable_vt8231_serial(void) {
- unsigned long x;
- uint8_t c;
- device_t dev;
- outb(6, 0x80);
- dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
-
- if (dev == PCI_DEV_INVALID) {
- outb(7, 0x80);
- die("Serial controller not found\r\n");
- }
-
- /* first, you have to enable the superio and superio config.
- put a 6 reg 80
- */
- c = pci_read_config8(dev, 0x50);
- c |= 6;
- pci_write_config8(dev, 0x50, c);
- outb(2, 0x80);
- // now go ahead and set up com1.
- // set address
- vt8231_writesuper(0xf4, 0xfe);
- // enable serial out
- vt8231_writesuper(0xf2, 7);
- // That's it for the sio stuff.
- // movl $SUPERIOCONFIG, %eax
- // movb $9, %dl
- // PCI_WRITE_CONFIG_BYTE
- // set up reg to set baud rate.
- vt8231_writesiobyte(0x3fb, 0x80);
- // Set 115 kb
- vt8231_writesioword(0x3f8, 1);
- // Set 9.6 kb
- // WRITESIOWORD(0x3f8, 12)
- // now set no parity, one stop, 8 bits
- vt8231_writesiobyte(0x3fb, 3);
- // now turn on RTS, DRT
- vt8231_writesiobyte(0x3fc, 3);
- // Enable interrupts
- vt8231_writesiobyte(0x3f9, 0xf);
- // should be done. Dump a char for fun.
- vt8231_writesiobyte(0x3f8, 48);
-
+static void enable_vt8231_serial(void)
+{
+ unsigned long x;
+ uint8_t c;
+ device_t dev;
+ outb(6, 0x80);
+ dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ outb(7, 0x80);
+ die("Serial controller not found\r\n");
+ }
+
+ /* first, you have to enable the superio and superio config.
+ put a 6 reg 80
+ */
+ c = pci_read_config8(dev, 0x50);
+ c |= 6;
+ pci_write_config8(dev, 0x50, c);
+ outb(2, 0x80);
+ // now go ahead and set up com1.
+ // set address
+ vt8231_writesuper(0xf4, 0xfe);
+ // enable serial out
+ vt8231_writesuper(0xf2, 7);
+ // That's it for the sio stuff.
+ // movl $SUPERIOCONFIG, %eax
+ // movb $9, %dl
+ // PCI_WRITE_CONFIG_BYTE
+ // set up reg to set baud rate.
+ vt8231_writesiobyte(0x3fb, 0x80);
+ // Set 115 kb
+ vt8231_writesioword(0x3f8, 1);
+ // Set 9.6 kb
+ // WRITESIOWORD(0x3f8, 12)
+ // now set no parity, one stop, 8 bits
+ vt8231_writesiobyte(0x3fb, 3);
+ // now turn on RTS, DRT
+ vt8231_writesiobyte(0x3fc, 3);
+ // Enable interrupts
+ vt8231_writesiobyte(0x3f9, 0xf);
+ // should be done. Dump a char for fun.
+ vt8231_writesiobyte(0x3f8, 48);
}
diff --git a/src/southbridge/via/vt8231/vt8231_early_smbus.c b/src/southbridge/via/vt8231/vt8231_early_smbus.c
index 49b942cb23..e419d59b63 100644
--- a/src/southbridge/via/vt8231/vt8231_early_smbus.c
+++ b/src/southbridge/via/vt8231/vt8231_early_smbus.c
@@ -24,115 +24,115 @@
static void enable_smbus(void)
{
- device_t dev;
- unsigned char c;
- /* Power management controller */
- dev = pci_locate_device(PCI_ID(0x1106,0x8235), 0);
-
- if (dev == PCI_DEV_INVALID) {
- die("SMBUS controller not found\r\n");
- }
-
- // set IO base address to SMBUS_IO_BASE
- pci_write_config32(dev, 0x90, SMBUS_IO_BASE|1);
-
- // Enable SMBus
- c = pci_read_config8(dev, 0xd2);
- c |= 5;
- pci_write_config8(dev, 0xd2, c);
-
- /* make it work for I/O ...
- */
- dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
- c = pci_read_config8(dev, 4);
- c |= 1;
- pci_write_config8(dev, 4, c);
- print_err_hex8(c);
- print_err(" is the comm register\n");
-
- print_debug("SMBus controller enabled\r\n");
+ device_t dev;
+ unsigned char c;
+ /* Power management controller */
+ dev = pci_locate_device(PCI_ID(0x1106,0x8235), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\r\n");
+ }
+
+ // set IO base address to SMBUS_IO_BASE
+ pci_write_config32(dev, 0x90, SMBUS_IO_BASE|1);
+
+ // Enable SMBus
+ c = pci_read_config8(dev, 0xd2);
+ c |= 5;
+ pci_write_config8(dev, 0xd2, c);
+
+ /* make it work for I/O ...
+ */
+ dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
+ c = pci_read_config8(dev, 4);
+ c |= 1;
+ pci_write_config8(dev, 4, c);
+ print_err_hex8(c);
+ print_err(" is the comm register\n");
+
+ print_debug("SMBus controller enabled\r\n");
}
static inline void smbus_delay(void)
{
- outb(0x80, 0x80);
+ outb(0x80, 0x80);
}
static int smbus_wait_until_ready(void)
{
unsigned char c;
- unsigned long loops;
- loops = SMBUS_TIMEOUT;
- do {
- unsigned char val;
- smbus_delay();
- c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
- while((c & 1) == 1) {
- print_err("c is ");
- print_err_hex8(c);
- print_err("\n");
- c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
- /* nop */
- }
-
- } while(--loops);
- return loops?0:-1;
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
+ c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ while((c & 1) == 1) {
+ print_err("c is ");
+ print_err_hex8(c);
+ print_err("\n");
+ c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ /* nop */
+ }
+
+ } while(--loops);
+ return loops?0:-1;
}
void smbus_reset(void)
{
- outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
- outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
- outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
- outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
-
- smbus_wait_until_ready();
- print_err("After reset status ");
- print_err_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT));
- print_err("\n");
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+
+ smbus_wait_until_ready();
+ print_err("After reset status ");
+ print_err_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT));
+ print_err("\n");
}
static int smbus_wait_until_done(void)
{
- unsigned long loops;
- unsigned char byte;
- loops = SMBUS_TIMEOUT;
- do {
- unsigned char val;
- smbus_delay();
+ unsigned long loops;
+ unsigned char byte;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
- byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
- if (byte & 1)
- break;
-
- } while(--loops);
- return loops?0:-1;
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ if (byte & 1)
+ break;
+
+ } while(--loops);
+ return loops?0:-1;
}
static void smbus_print_error(unsigned char host_status_register)
{
- print_err("smbus_error: ");
- print_err_hex8(host_status_register);
- print_err("\n");
- if (host_status_register & (1 << 4)) {
- print_err("Interrup/SMI# was Failed Bus Transaction\n");
- }
- if (host_status_register & (1 << 3)) {
- print_err("Bus Error\n");
- }
- if (host_status_register & (1 << 2)) {
- print_err("Device Error\n");
- }
- if (host_status_register & (1 << 1)) {
- print_err("Interrupt/SMI# was Successful Completion\n");
- }
- if (host_status_register & (1 << 0)) {
- print_err("Host Busy\n");
- }
+ print_err("smbus_error: ");
+ print_err_hex8(host_status_register);
+ print_err("\n");
+ if (host_status_register & (1 << 4)) {
+ print_err("Interrup/SMI# was Failed Bus Transaction\n");
+ }
+ if (host_status_register & (1 << 3)) {
+ print_err("Bus Error\n");
+ }
+ if (host_status_register & (1 << 2)) {
+ print_err("Device Error\n");
+ }
+ if (host_status_register & (1 << 1)) {
+ print_err("Interrupt/SMI# was Successful Completion\n");
+ }
+ if (host_status_register & (1 << 0)) {
+ print_err("Host Busy\n");
+ }
}
@@ -141,39 +141,39 @@ static void smbus_print_error(unsigned char host_status_register)
static unsigned char smbus_read_byte(unsigned char devAdr,
unsigned char bIndex)
{
- unsigned short i;
- unsigned char bData;
- unsigned char sts = 0;
-
- /* clear host status */
- outb(0xff, SMBUS_IO_BASE);
-
- /* check SMBUS ready */
- for ( i = 0; i < 0xFFFF; i++ )
- if ( (inb(SMBUS_IO_BASE) & 0x01) == 0 )
- break;
-
- /* set host command */
- outb(bIndex, SMBUS_IO_BASE+3);
-
- /* set slave address */
- outb(devAdr | 0x01, SMBUS_IO_BASE+4);
-
- /* start */
- outb(0x48, SMBUS_IO_BASE+2);
-
- /* SMBUS Wait Ready */
- for ( i = 0; i < 0xFFFF; i++ )
- if ( ((sts = inb(SMBUS_IO_BASE)) & 0x01) == 0 )
- break;
- if ((sts & ~3) != 0) {
- smbus_print_error(sts);
- return 0;
- }
- bData=inb(SMBUS_IO_BASE+5);
-
- return bData;
-
+ unsigned short i;
+ unsigned char bData;
+ unsigned char sts = 0;
+
+ /* clear host status */
+ outb(0xff, SMBUS_IO_BASE);
+
+ /* check SMBUS ready */
+ for ( i = 0; i < 0xFFFF; i++ )
+ if ( (inb(SMBUS_IO_BASE) & 0x01) == 0 )
+ break;
+
+ /* set host command */
+ outb(bIndex, SMBUS_IO_BASE+3);
+
+ /* set slave address */
+ outb(devAdr | 0x01, SMBUS_IO_BASE+4);
+
+ /* start */
+ outb(0x48, SMBUS_IO_BASE+2);
+
+ /* SMBUS Wait Ready */
+ for ( i = 0; i < 0xFFFF; i++ )
+ if ( ((sts = inb(SMBUS_IO_BASE)) & 0x01) == 0 )
+ break;
+ if ((sts & ~3) != 0) {
+ smbus_print_error(sts);
+ return 0;
+ }
+ bData=inb(SMBUS_IO_BASE+5);
+
+ return bData;
+
}
/* for reference, here is the fancier version which we will use at some
@@ -182,48 +182,48 @@ static unsigned char smbus_read_byte(unsigned char devAdr,
# if 0
int smbus_read_byte(unsigned device, unsigned address, unsigned char *result)
{
- unsigned char host_status_register;
- unsigned char byte;
-
- reset();
-
- smbus_wait_until_ready();
-
- /* setup transaction */
- /* disable interrupts */
- outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
- /* set the device I'm talking too */
- outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
- /* set the command/address... */
- outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
- /* set up for a byte data read */
- outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2),
- SMBUS_IO_BASE + SMBHSTCTL);
-
- /* clear any lingering errors, so the transaction will run */
- outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
-
- /* clear the data byte...*/
- outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
-
- /* start the command */
- outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
- SMBUS_IO_BASE + SMBHSTCTL);
-
- /* poll for transaction completion */
- smbus_wait_until_done();
-
- host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-
- /* Ignore the In Use Status... */
- host_status_register &= ~(1 << 6);
-
- /* read results of transaction */
- byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
- smbus_print_error(byte);
-
- *result = byte;
- return host_status_register != 0x02;
+ unsigned char host_status_register;
+ unsigned char byte;
+
+ reset();
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2),
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* Ignore the In Use Status... */
+ host_status_register &= ~(1 << 6);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+ smbus_print_error(byte);
+
+ *result = byte;
+ return host_status_register != 0x02;
}