summaryrefslogtreecommitdiff
path: root/src/southbridge
diff options
context:
space:
mode:
authorZheng Bao <zheng.bao@amd.com>2010-10-10 15:18:53 +0000
committerZheng Bao <Zheng.Bao@amd.com>2010-10-10 15:18:53 +0000
commit2a5101aba49315b6c46aa3dc4c6c07633e453c06 (patch)
tree4344b0efb6fa81cf05f5ff3249b41370c579ed15 /src/southbridge
parent115c5b982495f8495968e0ea4fd77f63df6e5d71 (diff)
downloadcoreboot-2a5101aba49315b6c46aa3dc4c6c07633e453c06.tar.xz
Trivial. Spelling check.
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge')
-rw-r--r--src/southbridge/amd/sb600/sb600_hda.c6
-rw-r--r--src/southbridge/amd/sb600/sb600_sata.c4
-rw-r--r--src/southbridge/amd/sb600/sb600_sm.c2
-rw-r--r--src/southbridge/amd/sb600/sb600_usb.c2
-rw-r--r--src/southbridge/amd/sb700/sb700_early_setup.c4
-rw-r--r--src/southbridge/amd/sb700/sb700_hda.c4
-rw-r--r--src/southbridge/amd/sb700/sb700_lpc.c2
-rw-r--r--src/southbridge/amd/sb700/sb700_sata.c2
-rw-r--r--src/southbridge/amd/sb700/sb700_sm.c4
-rw-r--r--src/southbridge/amd/sb700/sb700_usb.c6
10 files changed, 18 insertions, 18 deletions
diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c
index 1768350686..84df3f169f 100644
--- a/src/southbridge/amd/sb600/sb600_hda.c
+++ b/src/southbridge/amd/sb600/sb600_hda.c
@@ -53,7 +53,7 @@ static int set_bits(u32 port, u32 mask, u32 val)
dword &= mask;
} while ((dword != val) && --count);
- /* Timeout occured */
+ /* Timeout occurred */
if (!count)
return -1;
return 0;
@@ -169,7 +169,7 @@ static u32 find_verb(u32 viddid, u32 ** verb)
}
/**
- * Wait 50usec for for the codec to indicate it is ready
+ * Wait 50usec for the codec to indicate it is ready
* no response would imply that the codec is non-operative
*/
static int wait_for_ready(u32 base)
@@ -190,7 +190,7 @@ static int wait_for_ready(u32 base)
}
/**
- * Wait 50usec for for the codec to indicate that it accepted
+ * Wait 50usec for the codec to indicate that it accepted
* the previous command. No response would imply that the code
* is non-operative
*/
diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c
index 0feebac92f..055e7daa85 100644
--- a/src/southbridge/amd/sb600/sb600_sata.c
+++ b/src/southbridge/amd/sb600/sb600_sata.c
@@ -39,7 +39,7 @@ static int sata_drive_detect(int portnum, u16 iobar)
if (byte != (0xA0 + 0x10 * (portnum % 2))) {
/* This will happen at the first iteration of this loop
* if the first SATA port is unpopulated and the
- * second SATA port is poulated.
+ * second SATA port is populated.
*/
printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
"retrying init\n", i * 10);
@@ -83,7 +83,7 @@ static void sata_init(struct device *dev)
byte = 0x6 << 2;
pci_write_config8(sm_dev, 0xaf, byte);
- /* get base addresss */
+ /* get base address */
sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
diff --git a/src/southbridge/amd/sb600/sb600_sm.c b/src/southbridge/amd/sb600/sb600_sm.c
index 66e93e6e33..71e546beca 100644
--- a/src/southbridge/amd/sb600/sb600_sm.c
+++ b/src/southbridge/amd/sb600/sb600_sm.c
@@ -338,7 +338,7 @@ static void sb600_sm_set_resources(struct device *dev)
pci_dev_set_resources(dev);
- /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */
byte = pm_ioread(0x52);
byte |= 1 << 6;
pm_iowrite(0x52, byte);
diff --git a/src/southbridge/amd/sb600/sb600_usb.c b/src/southbridge/amd/sb600/sb600_usb.c
index 942f2309d6..7539f083c6 100644
--- a/src/southbridge/amd/sb600/sb600_usb.c
+++ b/src/southbridge/amd/sb600/sb600_usb.c
@@ -96,7 +96,7 @@ static void usb_init2(struct device *dev)
usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);
- /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
+ /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */
dword = 0x00020F00;
write32(usb2_bar0 + 0xC0, dword);
diff --git a/src/southbridge/amd/sb700/sb700_early_setup.c b/src/southbridge/amd/sb700/sb700_early_setup.c
index d667143ded..8c268d60af 100644
--- a/src/southbridge/amd/sb700/sb700_early_setup.c
+++ b/src/southbridge/amd/sb700/sb700_early_setup.c
@@ -63,7 +63,7 @@ static u8 set_sb700_revision(void)
rev = 0x11; /* A11 */
else if (enable_14Mhz == 0x1) {
/* This happens, if does, only once. So later if we need to get
- * the rivision ID, we don't have to make such a big function.
+ * the revision ID, we don't have to make such a big function.
* We just get reg 0x8 in smbus dev. 0x39 is A11, 0x3A is A12. */
rev = 0x12;
byte = pci_read_config8(dev, 0x40);
@@ -549,7 +549,7 @@ static void sb700_pci_cfg(void)
/* LPC Device, BDF:0-20-3 */
/* The code below is ported from old chipset. It is not
- * metioned in RPR. But I keep them. The registers and the
+ * mentioned in RPR. But I keep them. The registers and the
* comments are compatible. */
dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
/* Enabling LPC DMA function. */
diff --git a/src/southbridge/amd/sb700/sb700_hda.c b/src/southbridge/amd/sb700/sb700_hda.c
index af1361692a..417d513e90 100644
--- a/src/southbridge/amd/sb700/sb700_hda.c
+++ b/src/southbridge/amd/sb700/sb700_hda.c
@@ -91,7 +91,7 @@ no_codec:
}
/**
- * Wait 50usec for for the codec to indicate it is ready
+ * Wait 50usec for the codec to indicate it is ready
* no response would imply that the codec is non-operative
*/
static int wait_for_ready(u32 base)
@@ -112,7 +112,7 @@ static int wait_for_ready(u32 base)
}
/**
- * Wait 50usec for for the codec to indicate that it accepted
+ * Wait 50usec for the codec to indicate that it accepted
* the previous command. No response would imply that the code
* is non-operative
*/
diff --git a/src/southbridge/amd/sb700/sb700_lpc.c b/src/southbridge/amd/sb700/sb700_lpc.c
index 14ed1b5418..f612a6a2df 100644
--- a/src/southbridge/amd/sb700/sb700_lpc.c
+++ b/src/southbridge/amd/sb700/sb700_lpc.c
@@ -108,7 +108,7 @@ static void sb700_lpc_set_resources(struct device *dev)
/**
* @brief Enable resources for children devices
*
- * @param dev the device whos children's resources are to be enabled
+ * @param dev the device whose children's resources are to be enabled
*
*/
static void sb700_lpc_enable_childrens_resources(device_t dev)
diff --git a/src/southbridge/amd/sb700/sb700_sata.c b/src/southbridge/amd/sb700/sb700_sata.c
index 5c72a98a76..08b9aa8ad9 100644
--- a/src/southbridge/amd/sb700/sb700_sata.c
+++ b/src/southbridge/amd/sb700/sb700_sata.c
@@ -111,7 +111,7 @@ static void sata_init(struct device *dev)
/* get rev_id */
rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
- /* get base addresss */
+ /* get base address */
sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
diff --git a/src/southbridge/amd/sb700/sb700_sm.c b/src/southbridge/amd/sb700/sb700_sm.c
index 65ccce9199..b017a1452f 100644
--- a/src/southbridge/amd/sb700/sb700_sm.c
+++ b/src/southbridge/amd/sb700/sb700_sm.c
@@ -206,7 +206,7 @@ static void sm_init(device_t dev)
/* 4.14:Enabling Requester ID for upstream traffic. */
abcfg_reg(0x98, 1 << 16, 1 << 16);
- /* 9.2: Enableing IDE Data Bus DD7 Pull Down Resistor */
+ /* 9.2: Enabling IDE Data Bus DD7 Pull Down Resistor */
byte = pm2_ioread(0xE5);
byte |= 1 << 2;
pm2_iowrite(0xE5, byte);
@@ -345,7 +345,7 @@ static void sb700_sm_set_resources(struct device *dev)
pci_dev_set_resources(dev);
- /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */
byte = pm_ioread(0x52);
byte |= 1 << 6;
pm_iowrite(0x52, byte);
diff --git a/src/southbridge/amd/sb700/sb700_usb.c b/src/southbridge/amd/sb700/sb700_usb.c
index 8ee6e37ac9..3b3ad584a7 100644
--- a/src/southbridge/amd/sb700/sb700_usb.c
+++ b/src/southbridge/amd/sb700/sb700_usb.c
@@ -83,7 +83,7 @@ static void usb_init2(struct device *dev)
usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);
- /* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
+ /* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */
dword = 0x00020F00;
write32(usb2_bar0 + 0xC0, dword);
@@ -105,8 +105,8 @@ static void usb_init2(struct device *dev)
pci_write_config32(dev, 0x50, dword);
#endif
- /* RPR6.13 Enabling Fix for EHCI Controller Dirver Yellow Sign Issue */
- /* RPR says it is just for A12. CIMM sets it when it is above A11. */
+ /* RPR6.13 Enabling Fix for EHCI Controller Driver Yellow Sign Issue */
+ /* RPR says it is just for A12. CIMx sets it when it is above A11. */
dword = pci_read_config32(dev, 0x50);
dword |= (1 << 20);
pci_write_config32(dev, 0x50, dword);