winbond/w83627dhg: Fix logical device power down in ACPI

The W83627DHG has some power managements bits to power down individual
logical devices. These are called `* Power Down`. Counterintuitively and
in contrast to `Immediate Power Down` (bit to power down the whole chip),
these bits are set when the respective logical device is powered.

Unfortunately, our ACPI code set them wrong which led to disabled
devices after a S3 suspend/resume. Adding an option how to set the PM
bits and setting them to zero for the W83627DHG, corrects it.

Tested with kontron/ktqm77.

Change-Id: I8a472d480d4277721bd17c9f7c2ce44fa84e8ae2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3590
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

3 files changed, 17 insertions, 13 deletions

diff --git a/src/superio/acpi/pnp.asl b/src/superio/acpi/pnp.asl
index ba3882a619..0637c04894 100644
--- a/src/superio/acpi/pnp.asl
+++ b/src/superio/acpi/pnp.asl
@@ -90,25 +90,25 @@
  * PM_LDN	The logical device number to access the PM_REG
  *		bit
  */
-#define PNP_GENERIC_PSC(PM_REG, PM_LDN) \
+#define PNP_GENERIC_PSC(PM_REG, PM_VAL, PM_LDN) \
 	Store(^^_PSC (), Local0)\
 	If (Local0) { Return (Local0) }\
 	ENTER_CONFIG_MODE (PM_LDN)\
 	  Store (PM_REG, Local0)\
 	EXIT_CONFIG_MODE ()\
-	If (Local0) { Return (1) }\
+	If (LEqual(Local0, PM_VAL)) { Return (1) }\
 	Else { Return (0) }\
 
 /* Disable power saving mode */
-#define PNP_GENERIC_PS0(PM_REG, PM_LDN) \
+#define PNP_GENERIC_PS0(PM_REG, PM_VAL, PM_LDN) \
 	ENTER_CONFIG_MODE (PM_LDN)\
-	  Store (Zero, PM_REG)\
+	  Store (Not(PM_VAL), PM_REG)\
 	EXIT_CONFIG_MODE ()
 
 /* Enable power saving mode */
-#define PNP_GENERIC_PS1(PM_REG, PM_LDN) \
+#define PNP_GENERIC_PS1(PM_REG, PM_VAL, PM_LDN) \
 	ENTER_CONFIG_MODE (PM_LDN)\
-	  Store (One, PM_REG)\
+	  Store (PM_VAL, PM_REG)\
 	EXIT_CONFIG_MODE ()
 
 
diff --git a/src/superio/acpi/pnp_generic.asl b/src/superio/acpi/pnp_generic.asl
index f7a9b13099..74fd028bbe 100644
--- a/src/superio/acpi/pnp_generic.asl
+++ b/src/superio/acpi/pnp_generic.asl
@@ -31,6 +31,8 @@
  *                      name (DDN) of this device (e.g. "COM1", optional)
  * SUPERIO_PNP_PM_REG	Identifier of a 1-bit register to power down
  *			the logical device (optional)
+ * SUPERIO_PNP_PM_VAL	The value for SUPERIO_PNP_PM_REG to power the logical
+ *			device down (required if SUPERIO_PNP_PM_REG is defined)
  * SUPERIO_PNP_PM_LDN	The logical device number to access the PM_REG
  *			bit (required if SUPERIO_PNP_PM_REG is defined)
  * SUPERIO_PNP_IO0	The alignment and length of the first PnP i/o
@@ -73,15 +75,15 @@ Device (SUPERIO_ID(PN, SUPERIO_PNP_LDN)) {
 
 #ifdef SUPERIO_PNP_PM_REG
 	Method (_PSC) {
-		PNP_GENERIC_PSC(SUPERIO_PNP_PM_REG, SUPERIO_PNP_PM_LDN)
+		PNP_GENERIC_PSC(SUPERIO_PNP_PM_REG, SUPERIO_PNP_PM_VAL, SUPERIO_PNP_PM_LDN)
 	}
 
 	Method (_PS0) {
-		PNP_GENERIC_PS0(SUPERIO_PNP_PM_REG, SUPERIO_PNP_PM_LDN)
+		PNP_GENERIC_PS0(SUPERIO_PNP_PM_REG, SUPERIO_PNP_PM_VAL, SUPERIO_PNP_PM_LDN)
 	}
 
 	Method (_PS1) {
-		PNP_GENERIC_PS1(SUPERIO_PNP_PM_REG, SUPERIO_PNP_PM_LDN)
+		PNP_GENERIC_PS1(SUPERIO_PNP_PM_REG, SUPERIO_PNP_PM_VAL, SUPERIO_PNP_PM_LDN)
 	}
 #else
 	Method (_PSC) {
diff --git a/src/superio/acpi/pnp_uart.asl b/src/superio/acpi/pnp_uart.asl
index c826106ea8..8ddecbfe61 100644
--- a/src/superio/acpi/pnp_uart.asl
+++ b/src/superio/acpi/pnp_uart.asl
@@ -32,7 +32,9 @@
  *                      name (DDN) of this uart (e.g. "COM1", optional)
  * SUPERIO_UART_PM_REG	Identifier of a 1-bit register to power down
  *			the UART (optional)
- * SUPERIO_UART_PM_LDN  The logical device number to access the PM_REG
+ * SUPERIO_UART_PM_VAL	The value for SUPERIO_UART_PM_REG to power the logical
+ *			device down (required if SUPERIO_UART_PM_REG is defined)
+ * SUPERIO_UART_PM_LDN	The logical device number to access the PM_REG
  *			bit (required if SUPERIO_UART_PM_REG is defined)
  */
 
@@ -65,15 +67,15 @@ Device (SUPERIO_ID(SER, SUPERIO_UART_LDN)) {
 
 #ifdef SUPERIO_UART_PM_REG
 	Method (_PSC) {
-		PNP_GENERIC_PSC(SUPERIO_UART_PM_REG, SUPERIO_UART_PM_LDN)
+		PNP_GENERIC_PSC(SUPERIO_UART_PM_REG, SUPERIO_UART_PM_VAL, SUPERIO_UART_PM_LDN)
 	}
 
 	Method (_PS0) {
-		PNP_GENERIC_PS0(SUPERIO_UART_PM_REG, SUPERIO_UART_PM_LDN)
+		PNP_GENERIC_PS0(SUPERIO_UART_PM_REG, SUPERIO_UART_PM_VAL, SUPERIO_UART_PM_LDN)
 	}
 
 	Method (_PS1) {
-		PNP_GENERIC_PS1(SUPERIO_UART_PM_REG, SUPERIO_UART_PM_LDN)
+		PNP_GENERIC_PS1(SUPERIO_UART_PM_REG, SUPERIO_UART_PM_VAL, SUPERIO_UART_PM_LDN)
 	}
 #else
 	Method (_PSC) {