trival. All the changes is about comment and spaces.

In superio folder.

1. Delete trailing white spaces.
2. Change the // comment to /* */.
3. Add some copyright header.
4. reindent.
5. delete multi blank lines.

I tried my best to find them. If anything left, please fix it
or tell me.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Zheng Bao <zheng.bao@amd.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4993 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

6 files changed, 4 insertions, 12 deletions

diff --git a/src/superio/ite/it8712f/Config.lb b/src/superio/ite/it8712f/Config.lb
index e1290e2fad..8e91c171ce 100644
--- a/src/superio/ite/it8712f/Config.lb
+++ b/src/superio/ite/it8712f/Config.lb
@@ -20,4 +20,3 @@
 
 config chip.h
 object superio.o
-
diff --git a/src/superio/ite/it8712f/Makefile.inc b/src/superio/ite/it8712f/Makefile.inc
index 898c87906e..a7078e101b 100644
--- a/src/superio/ite/it8712f/Makefile.inc
+++ b/src/superio/ite/it8712f/Makefile.inc
@@ -20,4 +20,3 @@
 
 #config chip.h
 obj-$(CONFIG_SUPERIO_ITE_IT8712F) += superio.o
-
diff --git a/src/superio/ite/it8712f/chip.h b/src/superio/ite/it8712f/chip.h
index f47e3cc33c..22dfa8dcc8 100644
--- a/src/superio/ite/it8712f/chip.h
+++ b/src/superio/ite/it8712f/chip.h
@@ -33,4 +33,3 @@ struct superio_ite_it8712f_config {
 };
 
 #endif /* _SUPERIO_ITE_IT8712F */
-
diff --git a/src/superio/ite/it8712f/it8712f.h b/src/superio/ite/it8712f/it8712f.h
index d4231972aa..260b12d798 100644
--- a/src/superio/ite/it8712f/it8712f.h
+++ b/src/superio/ite/it8712f/it8712f.h
@@ -32,4 +32,3 @@
 #define IT8712F_MIDI 0x08 /* MIDI port */
 #define IT8712F_GAME 0x09 /* GAME port */
 #define IT8712F_IR   0x0a /* Consumer IR */
-
diff --git a/src/superio/ite/it8712f/it8712f_early_serial.c b/src/superio/ite/it8712f/it8712f_early_serial.c
index 03899625bf..e0bfafd4ac 100644
--- a/src/superio/ite/it8712f/it8712f_early_serial.c
+++ b/src/superio/ite/it8712f/it8712f_early_serial.c
@@ -47,7 +47,6 @@ static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value)
 	outb(value, SIO_DATA);
 }
 
-
 static void it8712f_enter_conf(void)
 {
 	/*  Enter the configuration state (MB PnP mode). */
@@ -67,7 +66,6 @@ static void it8712f_exit_conf(void)
 	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
 }
 
-
 static void it8712f_24mhz_clkin(void)
 {
 	it8712f_enter_conf();
@@ -76,10 +74,10 @@ static void it8712f_24mhz_clkin(void)
 	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x1);
 
 	it8712f_exit_conf();
-
 }
 
-static void it8712f_enable_3vsbsw(void) {
+static void it8712f_enable_3vsbsw(void)
+{
 
 	/* We need to set enable 3VSBSW#, this was documented only in IT8712F_V0.9.2!
 	 LDN 7, reg 0x2a - needed for S3, or memory power will be cut off.
@@ -93,7 +91,6 @@ static void it8712f_enable_3vsbsw(void) {
 	it8712f_exit_conf();
 }
 
-
 static void it8712f_kill_watchdog(void)
 {
 	it8712f_enter_conf();
@@ -114,8 +111,8 @@ static void it8712f_enable_serial(device_t dev, unsigned iobase)
 	/* (2) Modify the data of configuration registers. */
 
 	/* Select the chip to configure (if there's more than one).
-           Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
-           If this register is not written, both chips are configured. */
+	   Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
+	   If this register is not written, both chips are configured. */
 	/* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CONFIGSEL, 0x00); */
 
 	/* Enable serial port(s). */
diff --git a/src/superio/ite/it8712f/superio.c b/src/superio/ite/it8712f/superio.c
index 6a461f74d8..1636d1987a 100644
--- a/src/superio/ite/it8712f/superio.c
+++ b/src/superio/ite/it8712f/superio.c
@@ -145,4 +145,3 @@ struct chip_operations superio_ite_it8712f_ops = {
 	CHIP_NAME("ITE IT8712F Super I/O")
 	.enable_dev = enable_dev,
 };
-