CMOS: Add set_option and rework get_option.

To ease some of my debugging pain on the unichrome, i decided i needed to
move FB size selection into cmos, so i could test a size and then reset it
to the default after loading this value so that the next reboot uses the
(working) default again. This meant implementing set_option in parallel to
get_option.

get_option was then found to have inversed argument ordering (like outb) and
passing char * and then depending on the cmos layout length, which made me
feel quite uncomfortable. Since we either have reserved space (which we
shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go. So all users of
get_option now have their arguments inversed and switched from using ints
to unsigned ints now.

The way get_cmos_value was implemented forced us to not overlap byte and to
have multibyte values be byte aligned. This logic is now adapted to do a
full uint32_t read (when needed) at any offset and any length up to 32, and
the shifting all happens inside an uint32_t as well. set_cmos_value was
implemented similarly. Both routines have been extensively tested in a
quick separate little program as it is not easy to get this stuff right.

build_opt_tbl.c was altered to function correctly within these new
parameters. The enum value retrieval has been changed strol(..., NULL, 10)
to stroul(..., NULL, 0), so that we not only are able to use unsigned ints
now but so that we also interprete hex values correctly. The 32bit limit
gets imposed on all entries not marked reserved, an unused "user_data" field
that appeared in a lot of cmos.layouts has been changed to reserved as well.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 4 insertions, 4 deletions

diff --git a/src/superio/winbond/w83627ehg/superio.c b/src/superio/winbond/w83627ehg/superio.c
index bd73e0e85d..fcb635f5a0 100644
--- a/src/superio/winbond/w83627ehg/superio.c
+++ b/src/superio/winbond/w83627ehg/superio.c
@@ -69,9 +69,9 @@ static void enable_hwm_smbus(device_t dev) {
 static void init_acpi(device_t dev)
 {
 	uint8_t value = 0x20;
-	int power_on = 1;
+	uint32_t power_on = 1;
 
-	get_option(&power_on, "power_on_after_fail");
+	get_option("power_on_after_fail", &power_on);
 	pnp_enter_ext_func_mode(dev);
 	pnp_write_index(dev->path.pnp.port, 7, 0x0a);
 	value = pnp_read_config(dev, 0xe4);
diff --git a/src/superio/winbond/w83627hf/superio.c b/src/superio/winbond/w83627hf/superio.c
index 123abc48fb..0c6d864214 100644
--- a/src/superio/winbond/w83627hf/superio.c
+++ b/src/superio/winbond/w83627hf/superio.c
@@ -52,9 +52,9 @@ static void enable_hwm_smbus(device_t dev) {
 static void init_acpi(device_t dev)
 {
 	uint8_t  value = 0x20;
-	int power_on = 1;
+	uint32_t power_on = 1;
 
-	get_option(&power_on, "power_on_after_fail");
+	get_option("power_on_after_fail", &power_on);
 	pnp_enter_ext_func_mode(dev);
 	pnp_write_index(dev->path.pnp.port,7,0x0a);
 	value = pnp_read_config(dev, 0xE4);