diff options
author | Marc Jones <marc.jones@se-eng.com> | 2015-07-19 15:20:17 -0600 |
---|---|---|
committer | Marc Jones <marc.jones@se-eng.com> | 2015-08-07 17:59:48 +0200 |
commit | 0b11bd0d028089288e52f9f08cdcfafc9910511b (patch) | |
tree | e561ef6110713f774cc71f95e5ad0f26302de85c /src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc | |
parent | 9b9400dc90906fddadc0303994422ec011a8f6e7 (diff) | |
download | coreboot-0b11bd0d028089288e52f9f08cdcfafc9910511b.tar.xz |
vendorcode: Move AMD sources from blobs to vendorcode
The AMD AGESA binaryPI sources were incorrectly committed to
3rdparty/blobs. Move them from blobs to vendorcode and fix
Kconfig and Makefile.inc to match.
Change-Id: I55a777553c1203464d7f7f4293b361fedcfa3283
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10982
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc')
-rw-r--r-- | src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc | 1311 |
1 files changed, 1311 insertions, 0 deletions
diff --git a/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc b/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc new file mode 100644 index 0000000000..2c51eb1fe8 --- /dev/null +++ b/src/vendorcode/amd/pi/00730F01/binaryPI/gcccar.inc @@ -0,0 +1,1311 @@ +/* + * Copyright (c) 2012, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/****************************************************************************** +* AMD Generic Encapsulated Software Architecture +* +* $Workfile:: GccCar.inc $Revision:: 32932 $ +* +* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier +* +******************************************************************************/ + +.altmacro + +BSP_STACK_BASE_ADDR = 0x30000 /* Base address for primary cores stack */ +BSP_STACK_SIZE = 0x10000 /* 64KB for BSP core */ +CORE0_STACK_BASE_ADDR = 0x80000 /* Base address for primary cores stack */ +CORE0_STACK_SIZE = 0x4000 /* 16KB for primary cores */ +CORE1_STACK_BASE_ADDR = 0x40000 /* Base address for AP cores */ +CORE1_STACK_SIZE = 0x1000 /* 4KB for each AP cores */ + +APIC_BASE_ADDRESS = 0x0000001B + APIC_BSC = 8 /* Boot Strap Core */ + +APIC_MSG_REG = 0x380 # Location of BSC message + APIC_MSG = 0x00DE00AD # Message data + APIC_INVD_ALL_DONE_MSG = 0x00AD00DE /* Indicate all cores have invalidated */ +APIC_CMD_LO_REG = 0x300 # APIC command low +APIC_CMD_HI_REG = 0x310 # APIC command high +// del CMD_REG_TO_READ_DATA = 0x00000338 # APIC command for remote read of APIC_MSG_REG + REMOTE_READ_STS = 0x00030000 # Remote read status mask + REMOTE_DELIVERY_PEND = 0x00010000 # Remote read is pending + REMOTE_DELIVERY_DONE = 0x00020000 # Remote read is complete + DELIVERY_STS_BIT = 12 #Delivery status valid bit +APIC_ID_REG = 0x0020 # Local APIC ID offset + APIC20_APICID = 24 +APIC_REMOTE_READ_REG = 0x00C0 # Remote read offset + +# Flags can only run from bits 31 to 24. Bits 23:0 are in use. +AMD_CU_NEED_TO_WAIT = 31 +AMD_CU_SEND_INVD_MSG = 30 +AMD_CU_RESTORE_ES = 29 + +AMD_MTRR_VARIABLE_BASE0 = 0x0200 +AMD_MTRR_VARIABLE_BASE6 = 0x020C +AMD_MTRR_VARIABLE_BASE7 = 0x020E + VMTRR_VALID = 11 + MTRR_TYPE_WB = 0x06 + MTRR_TYPE_WP = 0x05 + MTRR_TYPE_WT = 0x04 + MTRR_TYPE_UC = 0x00 +AMD_MTRR_VARIABLE_MASK7 = 0x020F +AMD_MTRR_FIX64k_00000 = 0x0250 +AMD_MTRR_FIX16k_80000 = 0x0258 +AMD_MTRR_FIX16k_A0000 = 0x0259 +AMD_MTRR_FIX4k_C0000 = 0x0268 +AMD_MTRR_FIX4k_C8000 = 0x0269 +AMD_MTRR_FIX4k_D0000 = 0x026A +AMD_MTRR_FIX4k_D8000 = 0x026B +AMD_MTRR_FIX4k_E0000 = 0x026C +AMD_MTRR_FIX4k_E8000 = 0x026D +AMD_MTRR_FIX4k_F0000 = 0x026E +AMD_MTRR_FIX4k_F8000 = 0x026F + +/* Reproduced from AGESA.h */ +AMD_AP_MTRR_FIX64k_00000 = 0x00000250 +AMD_AP_MTRR_FIX16k_80000 = 0x00000258 +AMD_AP_MTRR_FIX16k_A0000 = 0x00000259 +AMD_AP_MTRR_FIX4k_C0000 = 0x00000268 +AMD_AP_MTRR_FIX4k_C8000 = 0x00000269 +AMD_AP_MTRR_FIX4k_D0000 = 0x0000026A +AMD_AP_MTRR_FIX4k_D8000 = 0x0000026B +AMD_AP_MTRR_FIX4k_E0000 = 0x0000026C +AMD_AP_MTRR_FIX4k_E8000 = 0x0000026D +AMD_AP_MTRR_FIX4k_F0000 = 0x0000026E +AMD_AP_MTRR_FIX4k_F8000 = 0x0000026F +CPU_LIST_TERMINAL = 0xFFFFFFFF + +AMD_MTRR_DEFTYPE = 0x02FF + WB_DRAM_TYPE = 0x1E /* MemType - memory type */ + MTRR_DEF_TYPE_EN = 11 /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */ + MTRR_DEF_TYPE_FIX_EN = 10 /* MtrrDefTypeEn - fixed MTRRs default enabled */ + +HWCR = 0x0C0010015 /* Hardware Configuration */ + INVD_WBINVD = 0x04 /* INVD to WBINVD conversion */ + +IORR_BASE = 0x0C0010016 /* IO Range Regusters Base/Mask, 2 pairs */ + /* uses 16h - 19h */ +TOP_MEM = 0x0C001001A /* Top of Memory */ +TOP_MEM2 = 0x0C001001D /* Top of Memory2 */ + +LS_CFG = 0x0C0011020 /* Load-Store Configuration */ + DIS_SS = 28 /* Family 10h,12h,15h:Disable Streng Store functionality */ + DIS_STREAM_ST = 28 /* Family 14h:DisStreamSt - Disable Streaming Store functionality */ + +IC_CFG = 0x0C0011021 /* Instruction Cache Config Register */ + IC_DIS_SPEC_TLB_RLD = 9 /* Disable speculative TLB reloads */ + DIS_IND = 14 /* Family 10-14h:Disable Indirect Branch Predictor */ + DIS_I_CACHE = 14 /* Family 15h:DisICache - Disable Indirect Branch Predictor */ + +DC_CFG = 0x0C0011022 /* Data Cache Configuration */ + DC_DIS_SPEC_TLB_WALK = 4 /* Disable speculative table-walks */ + DIS_HW_PF = 13 /* Hardware prefetches bit */ +DE_CFG = 0x0C0011029 /* Decode Configuration */ + CL_FLUSH_SERIALIZE = 23 /* Family 12h,15h: CL Flush Serialization */ + +BU_CFG2 = 0x0C001102A /* Family 10h: Bus Unit Configuration 2 */ +CU_CFG2 = 0x0C001102A /* Family 15h: Combined Unit Configuration 2 */ + F10_CL_LINES_TO_NB_DIS = 15 /* ClLinesToNbDis - allows WP code to be cached in L2 */ + IC_DIS_SPEC_TLB_WR = 35 /* IcDisSpecTlbWr - ITLB speculative writes */ + F16_CL_LINES_TO_L2_DIS = 15 /* ClLinesToL2Dis */ + +//del CU_CFG3 = 0x0C001102B /* Combined Unit Configuration 3 */ +//del COMBINE_CR0_CD = 49 /* Combine CR0.CD for both cores of a compute unit */ +//del L2I_CFG = 0x0C00110A0 /* L2I Configuration */ + L2_RINSER_DIS = 20 /* L2 rinser disable */ + PREFETCHER_DIS = 7 /* L2 prefetcher disable*/ + CACHE_IC_ATTR_DIS = 3 /* Inserting IC attributes into the L2 disable */ + +CR0_PE = 0 # Protection Enable +CR0_NW = 29 # Not Write-through +CR0_CD = 30 # Cache Disable +CR0_PG = 31 # Paging Enable + +/* CPUID Functions */ + +CPUID_MODEL = 1 +AMD_CPUID_FMF = 0x80000001 /* Family Model Features information */ +AMD_CPUID_L2Cache = 0X80000006 /* L2/L3 cache info */ +AMD_CPUID_APIC = 0x80000008 /* Long Mode and APIC info., core count */ + APIC_ID_CORE_ID_SIZE = 12 /* ApicIdCoreIdSize bit position */ + +NB_CFG = 0x0C001001F /* Northbridge Configuration Register */ + INIT_APIC_ID_CPU_ID_LO = 54 /* InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */ + ENABLE_CF8_EXT_CFG = 46 /* EnableCf8ExtCfg - enable CF8 extended configuration cycles */ + +MTRR_SYS_CFG = 0x0C0010010 /* System Configuration Register */ + CHX_TO_DIRTY_DIS = 16 /* ChxToDirtyDis Change to dirty disable */ + SYS_UC_LOCK_EN = 17 /* SysUcLockEn System lock command enable */ + MTRR_FIX_DRAM_EN = 18 /* MtrrFixDramEn MTRR fixed RdDram and WrDram attributes enable */ + MTRR_FIX_DRAM_MOD_EN = 19 /* MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */ + MTRR_VAR_DRAM_EN = 20 /* MtrrVarDramEn MTRR variable DRAM enable */ + MTRR_TOM2_EN = 21 /* MtrrTom2En MTRR top of memory 2 enable */ + +PERF_CONTROL3 = 0x0C0010003 /* Performance event control three */ + PERF_CONTROL3_RESERVE_L = 0x00200000 /* Preserve the reserved bits */ + PERF_CONTROL3_RESERVE_H = 0x0FCF0 /* Preserve the reserved bits */ + CONFIG_EVENT_L = 0x0F0E2 /* All cores with level detection */ + CONFIG_EVENT_H = 4 /* Increment count by number of event */ + /* occured in clock cycle */ + EVENT_ENABLE = 22 /* Enable the event */ +PERF_COUNTER3 = 0x0C0010007 /* Performance event counter three */ + +COMPUTE_UNIT_STATUS = 0x08000C580 /* Compute Unit Status Register */ + QUAD_CORE = 24 /* QuadCore four cores of a compute unit are enabled */ + DUAL_CORE = 16 /* DualCore two cores of a compute unit are enabled */ + TRIPLE_CORE = 8 /* TripleCore three cores of a compute unit are enabled */ + CU_ENABLED = 0 /* Enabled at least one core of a compute unit is enabled */ + +FUNC_3 = 3 +MCA_NB_CFG = 0x44 /* MCA NB Configuration */ +CPU_ERR_DIS = 6 /* CPU error response disable */ +PRODUCT_INFO_REG1 = 0x1FC /* Product Information Register 1 */ + +# Local use flags, in upper most byte if ESI +FLAG_UNKNOWN_FAMILY = 24 # Signals that the family# of the installed processor is not recognized +FLAG_STACK_REENTRY = 25 # Signals that the environment has made a re-entry (2nd) call to set up the stack +FLAG_IS_PRIMARY = 26 # Signals that this core is the primary within the comoute unit +FLAG_CORE_NOT_IDENTIFIED = 27 # Signals that the cores/compute units of the installed processor is not recognized +FLAG_FORCE_32K_STACK = 28 # Signals that to force 32KB stack size for BSP core +CR0_MASK = ((1 << CR0_CD) | (1 << CR0_NW)) +MSR_MASK = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN)) + +/**************************************************************************** + * + * CPU MACROS - PUBLIC + * + ****************************************************************************/ +.macro _WRMSR + .byte 0x0f, 0x30 +.endm + +.macro _RDMSR + .byte 0x0F, 0x32 +.endm + +.macro AMD_CPUID arg0 + .ifb \arg0 + mov $0x1, %eax + .byte 0x0F, 0x0A2 /* Execute instruction */ + bswap %eax + xchg %ah, %al /* Ext model in al now */ + rol $0x08, %eax /* Ext model in ah, model in al */ + and $0x0FFCF, ax /* Keep 23:16, 7:6, 3:0 */ + .else + mov \arg0, %eax + .byte 0x0F, 0x0A2 + .endif +.endm + +.macro MAKE_EXT_PCI_ADDR Seg, Bus, Dev, Func, Offset + mov $(1 << 31 | (Seg) << 28 | (((Offset) & (0x0F00)) >> 8) << 24 | (Bus) << 16 | (Dev) << 11 | (Func) << 8) | ((Offset) & (0xFC)), %eax +.endm +/**************************************************************************** +* +* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Set any family specific controls needed to enable the use of +* cache as general storage before main memory is available. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_ENABLE_STACK_FAMILY_HOOK + + AMD_ENABLE_STACK_FAMILY_HOOK_F16 + +.endm + +/**************************************************************************** +* +* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless +* +* Return any family specific controls to their 'standard' +* settings for using cache with main memory. +* +* Inputs: +* none +* Outputs: +* none + ****************************************************************************/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK + + AMD_DISABLE_STACK_FAMILY_HOOK_F16 + +.endm + +/**************************************************************************** +* +* GET_NODE_ID_CORE_ID Macro - Stackless +* +* Read family specific values to determine the node and core +* numbers for the core executing this code. +* +* Inputs: +* none +* Outputs: +* SI[7:0] = Core# (0..N, relative to node) +* SI[15:8]= Node# (0..N) +* SI[23:16]= reserved +* SI[24]= flag: 1=Family Unrecognized +* SI[25]= flag: 1=Interface re-entry call +* SI[26]= flag: 1=Core is primary of compute unit +* SI[31:27]= reserved, =0 +****************************************************************************/ +.macro GET_NODE_ID_CORE_ID + LOCAL node_core_exit + + mov $-1, %si + GET_NODE_ID_CORE_ID_F16 + + /* + * Check for unrecognized Family + */ + cmp $-1, %si # Has family (node/core) already been discovered? + jnz node_core_exit # Br if yes + + mov $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue + + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jc node_core_exit # Br if yes + hlt # Kill APs +node_core_exit: + +.endm + +/* +*************************************************************************** + Family 16h MACROS +***************************************************************************/ +/*-------------------------------------------------- + +AMD_ENABLE_STACK_FAMILY_HOOK_F16 Macro - Stackless + + Set any family specific controls needed to enable the use of + cache as general storage before main memory is available. + +Inputs: + ESI - node#, core#, flags from GET_NODE_ID_CORE_ID +Outputs: + none +Destroyed: + eax, ebx, ecx, edx + +Family 16h requirements (BKDG #48751 section 2.3.3): + * Paging must be disabled. + * MSRC001_0015[INVD_WBINVD]=0 + * MSRC001_1020[DisSS]=1 + * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 + * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 + * MSRC001_1022[DisHwPf]=1 + * If MSRC001_102B[CombineCr0Cd] == 1 then MSRC001_102B[CombineCroCd] = 0 + * No INVD or WBINVD, no exceptions, page faults or interrupts +-------------------------------------------------- + + */ + +.macro AMD_ENABLE_STACK_FAMILY_HOOK_F16 + LOCAL fam16_enable_stack_hook_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x07, %al # Is this family 16h? + jnz fam16_enable_stack_hook_exit # Br if no + + bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set + jc fam16_skipClearingBit4 + mov $HWCR, %ecx # MSR C001_0015 + _RDMSR + btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion + _WRMSR + +fam16_skipClearingBit4: + mov $IC_CFG, %ecx # MSR:C001_1021 + _RDMSR + bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative IC-TLB reloads bit + _WRMSR + +# mov %ebx, %eax # Restore revision info to EAX +# shr $16, %eax +# and $0x0F, %al # AL = cpu extended model + + mov $DC_CFG, %ecx # MSR:C001_1022 + _RDMSR + bts $DC_DIS_SPEC_TLB_WALK, %eax # Turn on Disable speculative DC-TLB reloads bit + bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit + _WRMSR # Remove KM in PI 1.1.0.0 + + mov $0x0C00110A0, %ecx # MSR:C001_10A0 + _RDMSR + bts $L2_RINSER_DIS, %eax #Do not search for the repair single bit errors in the background + bts $PREFETCHER_DIS, %eax + bts $CACHE_IC_ATTR_DIS, %eax + _WRMSR + +fam16_enable_stack_hook_exit: +.endm + +/* +; +; AMD_DISABLE_STACK_FAMILY_HOOK_F16 Macro - Stackless +; +; Return any family specific controls to their 'standard' +; settings for using cache with main memory. +; +; Inputs: +; ESI - [31:24] flags; [15:8]= Node#; [7:0]= core# +; Outputs: +; none +; Destroyed: +; eax, ebx, ecx, edx +; +; Family 16h requirements: +; * INVD or WBINVD +; * MSRC001_0015[INVD_WBINVD]=1 +; * MSRC001_1020[DisSS]=0 +; * MSRC001_1021[DIS_SPEC_TLB_RLD]=0 +; * MSRC001_1022[DIS_SPEC_TLB_RLD]=0 +; * MSRC001_1022[DIS_HW_PF]=0 +;--------------------------------------------------- +*/ +.macro AMD_DISABLE_STACK_FAMILY_HOOK_F16 + LOCAL fam16_disable_stack_hook_exit + LOCAL fam16_disable_stack_remote_read_exit +# LOCAL fam16_invd_done_remote_read_exit + + AMD_CPUID $CPUID_MODEL + mov %eax, %ebx # Save revision info to EBX + shr $20, %eax # AL = cpu extended family + cmp $0x07, %al # Is this family 16h? + jnz fam16_disable_stack_hook_exit # Br if no + + mov %ebx, %edi # Save revision info to EDI + AMD_CPUID $AMD_CPUID_APIC + mov %cl, %al # AL = number of cores - 1 + shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize + mov $1, %bx + shl %cl, %bl # BL = theoretical number of cores on socket + dec %bx # BL = core number on socket mask + mov %bl, %ah # AH = core number on socket mask + mov %edi, %ebx # Restore revision info to EBX + mov %ax, %di # DI[15:8] = core number mask, DI[7:0] = number of cores - 1 + + and $0x0F00FF, %ebx + mov %ebx, %eax + shr $8, %eax + or %ax, %bx # Save Extended Model, Model and Stepping to BX + # [11:8] = Extended Model, [7:4] = Model, [3:0] = Stepping (bx=0000000000010100, ok) + + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR # dx=0 ax=fee00800 + mov %bx, %dx # Save Extended Model, Model and Stepping to DX + shl $16, %edx #EDX[31:16] = Extended Model, Model and Stepping + mov %eax ,%ebx # EBX = LAPIC base + xor %ecx ,%ecx # Zero out CU flags + bts $AMD_CU_NEED_TO_WAIT, %ecx # Default to waiting + bts $AMD_CU_SEND_INVD_MSG, %ecx # Default to signaling + mov %cr0, %eax + bt $CR0_PE, %ax # Are we in protected mode? + # .if (!carry?) + jc 1f + bts $AMD_CU_RESTORE_ES, %ecx # Indicate ES restore is required + mov %es, %cx # Save ES segment register to CX + xor %ax, %ax + mov %ax, %es # Set ES to big real mode selector for 4GB access + # .endif + +1: + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_ID_REG, %bl # + mov %es:(%ebx), %eax # EAX[31:24] = APIC ID + shr $APIC20_APICID, %eax # AL = APIC ID + mov %al, %ah # AH = APIC ID + mov %di, %dx # DH = core mask + and %dh, %ah # AH = core number # ax=111 dx=01000F03 + + # .if (zero?) + jnz 1f + # Core 0 of a socket + btr $AMD_CU_SEND_INVD_MSG, %ecx # No need to signal after INVD + #.if (dl != 0) + cmp $0, %dl + jz 2f + # This socket has multiple cores + and $0xf000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %edi + mov %edi, %es:(%ebx) # Signal for non core 0s to complete CAR breakdown + jmp 1f + #.else +2: btr $AMD_CU_NEED_TO_WAIT, %ecx # No need to wait on a single core CPU + #.endif + # .endif +1: + + bt $AMD_CU_NEED_TO_WAIT, %ecx #cx = c0000000 + #.if (carry?) + jnc 1f + #.if (ah == dl) + cmp %dl, %ah + jnz 2f + # This is the highest numbered core on this socket -- wait on core 0 + not %dh # Flip the mask to determine local core 0's APID ID + and %dh, %al # AL = target APIC ID # ax=310 + jmp 3f +2: #.else + # All other cores (including core 0) wait on the next highest core. + # In this way, cores will halt in a cascading fashion down to 0. + inc %al + #.endif +3: + shl $APIC20_APICID, %eax + and $0x0F000, %bx + or $APIC_CMD_HI_REG, %bx + mov %eax, %es:(%ebx) # Set target APIC ID + + # Use bits 23:16 as a timeout for unresponsive cores + ror $8, %ecx + mov $0xFF, %ch + stc + + #.while (carry?) +5: jnc 4f + and $0xF000, %bx #EBX = LAPIC base, offset 0 + or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300 + mov $0x338, %eax + mov %eax, %es:(%ebx) #Fire remove read IPI + inc %ch #Pre increment the timeout + stc + #.while (carry?) +7: jnc 6f + dec %ch #Check the timeout + jz fam16_disable_stack_remote_read_exit + mov %es:(%ebx), %eax # ax = 0000000000020338 + bt $DELIVERY_STS_BIT, %eax + jmp 7b +6: #.endw + stc + #.while (carry?) +7: jnc 6f + mov %es:(%ebx), %eax + and $REMOTE_READ_STS, %eax + #.if (eax == REMOTE_DELIVERY_PEND) + cmp $REMOTE_DELIVERY_PEND, %eax + jnz 8f + dec %ch # Check the timeout + jz fam16_disable_stack_hook_exit # Branch if there is an unreponsive core + stc + jmp 9f +8: #.else + clc +9: #.endif + jmp 7b +6: #.endw + #.if (eax == REMOTE_DELIVERY_DONE) + cmp $REMOTE_DELIVERY_DONE, %eax + jnz 6f + and $0x0F000, %bx #EBX = LAPIC base, offset 0 + or $APIC_REMOTE_READ_REG, %bl + mov %es:(%ebx), %eax + #.if (eax == APIC_MSG) + cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2 + jnz 8f + clc + jmp 9f + #.else +8: stc +9: #.endif + jmp 7f +6: #.else + dec %ch + jz fam16_disable_stack_remote_read_exit + stc +7: #.endif + jmp 5b +4: #.endw + +fam16_disable_stack_remote_read_exit: + rol $8, %ecx # Restore ECX + +1: #.endif + + bt $AMD_CU_RESTORE_ES, %ecx + #.if (carry?) + jnc 1f + mov %cx, %es +1: + mov %ecx, %edi + shr $16, %edx + mov %dx, %bx + + #Handshaking complete. Continue tearing down CAR. + + mov $IC_CFG, %ecx # MSR:C001_1021 + _RDMSR + btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads + _WRMSR + + mov $DC_CFG, %ecx # MSR:C001_1022 + _RDMSR + btr $DC_DIS_SPEC_TLB_WALK, %eax # Turn on speculative table-walks + #.if (bx != 0) # Is this rev A0? + #cmp $0, %bx + #jz 0f + btr $DIS_HW_PF, %eax # Turn on hardware prefetches + #.endif # End workaround for erratum 498 + #0: + _WRMSR + + mov $0x0C00110A0, %ecx #MSR:C001_10A0 + _RDMSR + btr $PREFETCHER_DIS, %eax + btr $CACHE_IC_ATTR_DIS, %eax + _WRMSR + + mov $BU_CFG2, %ecx + _RDMSR + btr $F16_CL_LINES_TO_L2_DIS, %eax + _WRMSR + + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion + _WRMSR + wbinvd # Clear the cache tag RAMs + #invd + + #Do Standard Family 16 work + mov $HWCR, %ecx # MSR:C001_0015h + _RDMSR + bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD + _WRMSR + #.endif # end + + bt $AMD_CU_SEND_INVD_MSG, %edi + #.if (carry?) + jnc 1f + AMD_CPUID $AMD_CPUID_APIC + shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize + mov $1, %di + shl %cl, %di #DI = theoretical number of cores on socket + dec %di # DI = core number on socket mask + # Non core zero needs to signal to core 0 to proceed + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR + mov %eax, %ebx # EBX = LAPIC base + and $0x0F000, %bx # EBX = LAPIC base, offset 0 + or $APIC_MSG_REG, %bx + mov $APIC_MSG, %eax + mov %eax, %es:(%ebx) # Signal for core 0 to complete CAR breakdown + + #TODO: Non core zero needs to wait for core zero to do INVD + #A handshake is required to ensure that all cores on a node invalidate in sync. + and $0x0F000, %bx + or $APIC_ID_REG, %bl + mov %es:(%ebx), %eax # EAX[31:24] = APIC ID + shr $APIC20_APICID, %eax # AL = APIC ID + mov %di, %dx # Use DL as core mask + not %dl + and %dl, %al # Remote read message from core zero + shl $APIC20_APICID, %eax + + and $0x0F000, %bx + or $APIC_CMD_HI_REG, %bx + mov %eax, %es:(%ebx) # + # Use bits 23:16 as a timeout for unresponsive cores + ror $8, %ecx + mov $0xFF, %ch + stc + + #.while (carry?) +5: jnc 4f + and $0xF000, %bx #EBX = LAPIC base, offset 0 + or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300 + mov $0x338, %eax + mov %eax, %es:(%ebx) #Fire remove read IPI + inc %ch #Pre increment the timeout + stc + #.while (carry?) +7: jnc 6f + dec %ch #Check the timeout + jz fam16_invd_done_remote_read_exit + mov %es:(%ebx), %eax # ax = 0000000000020338 + bt $DELIVERY_STS_BIT, %eax + jmp 7b +6: #.endw + stc + #.while (carry?) +7: jnc 6f + mov %es:(%ebx), %eax + and $REMOTE_READ_STS, %eax + #.if (eax == REMOTE_DELIVERY_PEND) + cmp $REMOTE_DELIVERY_PEND, %eax + jnz 8f + dec %ch # Check the timeout + jz fam16_invd_done_remote_read_exit # Branch if there is an unreponsive core + stc + jmp 9f +8: #.else + clc +9: #.endif + jmp 7b +6: #.endw + #.if (eax == REMOTE_DELIVERY_DONE) + cmp $REMOTE_DELIVERY_DONE, %eax + jnz 6f + and $0x0F000, %bx #EBX = LAPIC base, offset 0 + or $APIC_REMOTE_READ_REG, %bl + mov %es:(%ebx), %eax + #.if (eax == APIC_MSG) + cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2 + jnz 8f + clc + jmp 9f + #.else +8: stc +9: #.endif + jmp 7f +6: #.else + dec %ch + jz fam16_invd_done_remote_read_exit + stc +7: #.endif + jmp 5b +4: #.endw + + jmp 2f +fam16_invd_done_remote_read_exit: +1: #.else + mov $APIC_BASE_ADDRESS, %ecx + _RDMSR + mov %eax, %ebx + and $0x0F000, %bx + or $APIC_MSG_REG, %bx + mov $APIC_INVD_ALL_DONE_MSG, %edi + mov %edi, %es:(%ebx) +2: #.endif + + mov $0xc0011004, %ecx + _RDMSR + btr $30, %edx + _WRMSR + +fam16_disable_stack_hook_exit: +.endm + +/* +*/ +.macro GET_NODE_ID_CORE_ID_F16 + + LOCAL node_core_f16_exit + LOCAL node_core_f16_AP + LOCAL node_core_f16_shared + LOCAL node_core_f16_AP_not_TN + +#define F16_L2Size 1024 +#define F16_ShareCores 4 +#define F16_AllocMem 0 +#define F16_AllocExe 0 +#define F16_SzAddrBus 40 +#define F16_pad 0 + cmp $-1, %si # Has node/core already been discovered? + jnz node_core_f16_exit # Br if yes + + AMD_CPUID $CPUID_MODEL + shr $12, %eax # AL = cpu extended family + cmp $07, %ah # Is this family 16h? + jnz node_core_f16_exit # Br if no + shr $4, %al # AL = cpu extended model + shr $16, %ebx # BH = LocalApicId + mov %al, %bl # BL = cpu extended model + + # LoadTableAddress(FAM16H_INFO_STRUCT) + # movd mm5, eax # load pointer to Family Info Struc + + xor %esi, %esi # Assume BSC, clear local flags + mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B + _RDMSR + bt $APIC_BSC, %eax # Is this the BSC? + jnc node_core_f16_AP # Br if no + + # This is the BSP. + # Enable routing tables on BSP (just in case the HT init code has not yet enabled them) + mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax + btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0 + out %eax, %dx + jmp 6f #node_core_f16_shared # + +node_core_f16_AP: + mov %bl, %al # AL = cpu extended model + shr $8, %bx # BL = CPUID Fn0000_0001_EBX[LocalApicId] + #.if (al == 0) + cmp $3, %al # Is This ML? + jnz 5f + #.else +4: mov %bx, %si + jmp 6f +5: #node_core_f16_AP_not_KB + bts $FLAG_CORE_NOT_IDENTIFIED, %esi + #.endif + #.endif + # + # determine if this core shares MTRRs + # +6: #node_core_f16_shared + mov $COMPUTE_UNIT_STATUS, %eax # Compute Unit Status + mov %si, %bx + shl $3, %bh # Move node# to PCI Dev# field + add %bh, %ah # Adjust for node number + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + in %dx, %eax # [3:0]=Enabled# [19:16]=DualCore + + # BL is MyCore# + mov $0x04, %cx # Use CH as 'first of pair' core# + #.while (cl > 0) + jmp 0f + 8: + bt $CU_ENABLED, %eax # Is pair enabled? + #.if (carry?) # + jnc 1f + mov $0x01, %bh # flag core as primary + #.break .if (ch == bl) # Does 1st match MyCore#? + cmp %bl, %ch + je 9f + #inc %ch + xor %bh, %bh # flag core as NOT primary + # + bt $DUAL_CORE, %eax + #.if (carry?) + jnc 5f + add $1, %eax + #.endif + 5: + bt $TRIPLE_CORE, %eax + jnc 5f + #.if (carry?) + add $2, %eax + #.endif + 5: + bt $QUAD_CORE, %eax + jnc 5f + #.if (carry?) + add $3, %eax + #.endif + 5: + #.break .if (ch >= bl) #TODO: + cmp %bl, %ch + jae 9f + inc %ch + #.endif + 1: + shr $1, %eax + dec %cl + 0: + cmp $0x0, %cl + ja 8b + + #.endw + 9: + + #.if (cl == 0) + or %cl, %cl + jne 1f + #Error - core# didn't match Compute Unit Status content + bts $FLAG_CORE_NOT_IDENTIFIED, %esi + bts $FLAG_IS_PRIMARY, %esi # Set Is_Primary for unknowns + #.endif + 1: + #.if (bh != 0) # Check state of primary for the matched core + or %bh, %bh + je 2f + bts $FLAG_IS_PRIMARY, %esi # Set shared flag into return value + #.endif + 2: + +node_core_f16_exit: + +.endm + +/***************************************************************************** +* AMD_ENABLE_STACK: Setup a stack +* +* In: +* EBX = Return address (preserved) +* +* Out: +* SS:ESP - Our new private stack location +* +* EAX = AGESA_STATUS +* +* ECX = Stack size in bytes +* +* Requirements: +* * This routine presently is limited to a max of 64 processor cores +* Preserved: +* ebx ebp +* Destroyed: +* eax, ecx, edx, edi, esi, ds, es, ss, esp +* mmx0, mmx1 +* +* Description: +* Fixed MTRR address allocation to cores: +* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. +* There is a max of 1 BSP, 7 core0s and 56 other cores. +* Although each core has it's own cache storage, they share the address space. Each core must +* be assigned a private and unique address space for its stack. To support legacy systems, +* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved +* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) +* +* 80000h 40000h 00000h +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* 64K | | | | | | | | | 64K ea +* ea +----------+----------+----------+----------+----------+----------+----------+----------+ +* | MTRR 0000_0250 MTRRfix64K_00000 | +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node +* |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core +* +----------+----------+----------+----------+----------+----------+----------+----------+ +* +* C0000h B0000h A0000h 90000h 80000h +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +*16K | | | | | | | | | | | | | | | | | +* ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node +* | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core +* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ +* +* E0000h D0000h C0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* +* 100000h F0000h E0000h +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +* | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | +* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ +*****************************************************************************/ +.macro AMD_ENABLE_STACK + +# These are local labels. Declared so linker doesn't cause 'redefined label' errors + LOCAL SetupStack + LOCAL Real16bMode + LOCAL Protected32Mode + LOCAL ClearTheStack + +# Note that SS:ESP will be default stack. Note that this stack +# routine will not be used after memory has been initialized. Because +# of its limited lifetime, it will not conflict with typical PCI devices. + movd %ebx, %mm0 # Put return address in a safe place + movd %ebp, %mm1 # Save some other user registers + + # get node id and core id of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node) + # Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established + + # determine if stack is already enabled. We are using the DefType MSR for this determination. + # It is =0 after reset; CAR setup sets it to enable the MTRRs + mov %cr0, %eax + test $CR0_MASK, %eax # Is cache disabled? (CD & NW bits) + jnz SetupStack # Jump if yes + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR + test $MSR_MASK, %eax # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) + jz SetupStack # Jump if no + or $FLAG_STACK_REENTRY, %esi # Bit25, indicate stack has already been initialized + +SetupStack: + # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM + mov %esi, %ebx # Get my Node/Core info + xor %bl, %bl + shl $3, %bh # Isolate my node#, match alignment for PCI Dev# + mov $0x8000C144, %eax # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit + add %bh, %ah + mov %eax, %ebx # Save PCI address for Base/Limit pair + + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + xor %eax, %eax # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) + out %eax, %dx # DRAM Limit = node0, no interleave + + mov %ebx, %eax + sub $4, %eax # Now point to the Base register + mov $0x0CF8, %dx + out %eax, %dx + add $4, %dx + mov $0x00000003, %eax # Set the read and write enable bits + out %eax, %dx # DRAM Base = 0x0000, R/W + + AMD_ENABLE_STACK_FAMILY_HOOK + + # Init CPU MSRs for our init routines + mov $MTRR_SYS_CFG, %ecx # SYS_CFG + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Turn on modification enable bit + _WRMSR + + mov %esi, %eax + bt $FLAG_STACK_REENTRY, %eax # Is this a 2nd entry? + #.if (!carry?) # On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP + jc 0f + bt $FLAG_IS_PRIMARY, %eax # Is this core the primary in a compute unit? + #.if (carry?) # Families using shared groups do not need to clear the MTRRs since that is done at power-on reset + # Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores + # Clear all variable and Fixed MTRRs for non-shared cores + jnc 0f + mov $AMD_MTRR_VARIABLE_BASE0, %ecx + xor %eax, %eax + xor %edx, %edx + #.while (cl != 10h) # Variable MTRRphysBase[n] and MTRRphysMask[n] + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x10, %cl + jne 2b + mov $AMD_MTRR_FIX64k_00000, %cx # MSR:0000_0250 + _WRMSR + mov $AMD_MTRR_FIX16k_80000, %cx # MSR:0000_0258 + _WRMSR + mov $AMD_MTRR_FIX16k_A0000, %cx # MSR:0000_0259 + _WRMSR + mov $AMD_MTRR_FIX4k_C0000, %cx # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 + #.while (cl != 70h) + jmp 3f + 4: + _WRMSR + inc %cl + #.endw + 3: + cmp $0x70, %cl + jne 4b + # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. + # - not strictly needed since the FixedMTRRs take presedence. + mov $(16 * 1024 * 1024), %eax + mov $TOP_MEM, %ecx # MSR:C001_001A + _WRMSR + #.endif # End Is_Primary + #.endif # End Stack_ReEntry + 0: + # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores + xor %eax, %eax + xor %edx, %edx + mov $IORR_BASE, %ecx # MSR:C001_0016 - 0019 + #.while (cl != 1Ah) + jmp 1f + 2: + _WRMSR + inc %cl + #.endw + 1: + cmp $0x1A, %cl + jne 2b + mov $TOP_MEM2, %ecx # MSR:C001_001D + _WRMSR + + # setup MTTRs for stacks + # A speculative read can be generated by a speculative fetch mis-aligned in a code zone + # or due to a data zone being interpreted as code. When a speculative read occurs outside a + # controlled region (intentionally used by software), it could cause an unwanted cache eviction. + # To prevent speculative reads from causing an eviction, the unused cache ranges are set + # to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. + # Note: some core stack regions will share an MTRR since the control granularity is much + # larger than the allocated stack zone. The allocation algorithm must account for this 'extra' + # space covered by the MTRR when parseling out cache space for the various uses. In some cases + # this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c + # + # Outcome of this block is that: (Note the MTRR map at the top of the file) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) + # + + mov %si, %ax # Load node, core + #.if (al == 0) # Is a core 0? + or %al, %al + jne 1f + #.if (ah == 0) # Is Node 0? (BSP) + or %ah, %ah + jne 2f + # Is BSP, assign a 64K stack + mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE >> 12)), %ebx + mov $BSP_STACK_BASE_ADDR, %ebp + jmp 0f + #.else # node 1 to 7, core0 + 2: + # Is a Core0 of secondary node, assign 16K stacks + mov $AMD_MTRR_FIX16k_80000, %bx + shl $16, %ebx # + mov %ah, %bh # Node# is used as slot# + mov $(CORE0_STACK_SIZE >> 12), %bl + mov %ah, %al # Base = (Node# * Size)# + mul %bl # + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE0_STACK_BASE_ADDR, %eax + mov %eax, %ebp + #.endif + jmp 0f + #.else #core 1 thru core 7 + 1: + # Is core 1-7 of any node, assign 4K stacks + mov $8, %al # CoreIndex = ( (Node# * 8) ... + mul %ah # + mov %si, %bx # + add %bl, %al # ... + Core#)# + + mov $AMD_MTRR_FIX64k_00000, %bx + shl $16, %ebx # + mov %al, %bh # Slot# = (CoreIndex / 16) + 4# + shr $4, %bh # + add $4, %bh # + mov $(CORE1_STACK_SIZE >> 12), %bl + + mul %bl # Base = ( (CoreIndex * Size) ... + movzx %ax, %eax # + shl $12, %eax # Expand back to full byte count (* 4K) + add $CORE1_STACK_BASE_ADDR, %eax # ... + Base_Addr)# + mov %eax, %ebp + #.endif + 0: + + # Now set the MTRR. Add this to already existing settings (don't clear any MTRR) + mov $WB_DRAM_TYPE, %edi # Load Cache type in 1st slot + mov %bh, %cl # ShiftCount = ((slot# ... + and $0x03, %cl # ... % 4) ... + shl $0x03, %cl # ... * 8)# + shl %cl, %edi # Cache type is now in correct position + ror $16, %ebx # Get the MTRR address + movzx %bx, %ecx # + rol $16, %ebx # Put slot# & size back in BX + _RDMSR # Read-modify-write the MSR + #.if (bh < 4) # Is value in lower or upper half of MSR? + cmp $4, %bh + jae 1f + or %edi, %eax # + jmp 0f + #.else + 1: # + or %edi, %edx # + #.endif # + 0: + _WRMSR # + + # Enable MTRR defaults as UC type + mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF + _RDMSR # Read-modify-write the MSR + bts $MTRR_DEF_TYPE_EN, %eax # MtrrDefTypeEn + bts $MTRR_DEF_TYPE_FIX_EN, %eax # MtrrDefTypeFixEn + _WRMSR + + # Close the modification window on the Fixed MTRRs + mov $MTRR_SYS_CFG, %ecx # MSR:0C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_EN, %eax # MtrrFixDramEn + bts $MTRR_VAR_DRAM_EN, %eax # variable MTRR enable bit + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Turn off modification enable bit + _WRMSR + + # Enable caching in CR0 + mov %cr0, %eax # Enable WT/WB cache + btr $CR0_PG, %eax # Make sure paging is disabled + btr $CR0_CD, %eax # Clear CR0 NW and CD + btr $CR0_NW, %eax + mov %eax, %cr0 + + # Use the Stack Base & size to calculate SS and ESP values + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # ebp - start address of stack block + # ebx - [31:16] - MTRR MSR address + # - [15:8] - slot# in MTRR register + # - [7:0] - block size in #4K blocks + # + mov %ebp, %esp # Initialize the stack pointer + mov %esp, %edi # Copy the stack start to edi + movzx %bl, %bx + movzx %bx, %ebx # Clear upper ebx, don't need MSR addr anymore + shl $12, %ebx # Make size full byte count (* 4K) + add %ebx, %esp # Set the Stack Pointer as full linear address + sub $4, %esp + # + # review: + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - 32b start address of stack block + # ebx - size of stack block + # esp - 32b linear stack pointer + # + + # Determine mode for SS base; + mov %cr0, %ecx # Check for 32-bit protect mode + bt $CR0_PE, %ecx # + #.if (!carry?) # PE=0 means real mode + jc Protected32Mode + mov %cs, %cx # PE=1 + cmp $0x0D000, %cx # Check for CS + jb Protected32Mode # If CS < D000, it is a selector instead of a segment + # alter SS:ESP for 16b Real Mode: +Real16bMode: + mov %edi, %eax + shr $4, %eax # Create a Real Mode segment for ss, ds, es + mov %ax, %ss + mov %ax, %ds + mov %ax, %es + shl $4, %eax + sub %eax, %edi # Adjust the clearing pointer for Seg:Offset mode + mov %ebx, %esp # Make SP an offset from SS + sub $4, %esp # + # .endif # endif + # #else + # Default is to use Protected 32b Mode + #.endif + ; +Protected32Mode: + # + # Clear The Stack + # Now that we have set the location and the MTRRs, initialize the cache by + # reading then writing to zero all of the stack area. + # review: + # ss - Stack base + # esp - stack pointer + # ebx - size of stack block + # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) + # edi - address of start of stack block + # + +ClearTheStack: # Stack base is in SS, stack pointer is in ESP + shr $2, %ebx # ebx = stack block size in dwords + mov %bx, %cx # + # Check our flags - Don't clear an existing stack + #.if ( !(esi & 0FF000000h)) # Check our flags + test $(1 << FLAG_STACK_REENTRY), %esi + jne 1f + cld + mov %edi, %esi + rep lodsl (%esi) # Pre-load the range + xor %eax, %eax + mov %bx, %cx + mov %edi, %esi # Preserve base for push on stack + rep stosl (%edi) # Clear the range + movl $0x0ABCDDCBA, (%esp) # Put marker in top stack dword + shl $2, %ebx # Put stack size and base + push %ebx # in top of stack + push %esi + + mov %ebx, %ecx # Return size of stack in bytes + xor %eax, %eax # eax = 0 : no error return code + jmp 0f + #.else + 1: + movzx %cx, %ecx + shl $2, %ecx # Return size of stack in bytes + mov %esi, %eax + shr $24, %eax # Keep the flags as part of the error report + or $0x40000000, %eax # eax = AGESA_WARNING (Stack has already been set up) + #.endif + 0: + + movd %mm0, %ebx # Restore return address + movd %mm1, %ebp +.endm + +/***************************************************************************** +* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine +* should only be executed on the BSP +* +* In: +* none +* +* Out: +* EAX = AGESA_SUCCESS +* +* Preserved: +* ebx +* Destroyed: +* eax, ecx, edx, esp +*****************************************************************************/ +.macro AMD_DISABLE_STACK + + mov %ebx, %esp # Save return address + + # get node/core/flags of current executing core + GET_NODE_ID_CORE_ID # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) + + # Turn on modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + bts $MTRR_FIX_DRAM_MOD_EN, %eax # Enable modifications + _WRMSR + + # Set lower 640K MTRRs for Write-Back memory caching + mov $AMD_MTRR_FIX64k_00000, %ecx + mov $0x1E1E1E1E, %eax + mov %eax, %edx + _WRMSR # 0 - 512K = WB Mem + mov $AMD_MTRR_FIX16k_80000, %ecx + _WRMSR # 512K - 640K = WB Mem + + # Turn off modification enable bit + mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 + _RDMSR + btr $MTRR_FIX_DRAM_MOD_EN, %eax # Disable modification + _WRMSR + + AMD_DISABLE_STACK_FAMILY_HOOK # Re-Enable 'normal' cache operations + + mov %esp, %ebx + xor %eax, %eax + +.endm + |