diff options
author | David Hendricks <dhendricks@fb.com> | 2018-03-09 14:30:38 -0800 |
---|---|---|
committer | Philipp Deppenwiese <zaolin.daisuki@gmail.com> | 2018-07-03 15:53:32 +0000 |
commit | 7d48ac5c7dfb52fc470bbad1013b4d460bc6a1e0 (patch) | |
tree | 42002ba1e86627339ff4a6cf38efb4b3f00033bb /src/vendorcode/cavium/bdk/libbdk-driver | |
parent | d837e660074e0621d63f59515f933c209441b653 (diff) | |
download | coreboot-7d48ac5c7dfb52fc470bbad1013b4d460bc6a1e0.tar.xz |
soc/cavium: Integrate BDK files into coreboot
* Make it compile.
* Fix whitespace errors.
* Fix printf formats.
* Add missing headers includes
* Guard headers with ifdefs
Compile DRAM init code in romstage.
Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage.
Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25089
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/vendorcode/cavium/bdk/libbdk-driver')
-rw-r--r-- | src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-mdio.c | 351 | ||||
-rw-r--r-- | src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-rnm.c | 36 |
2 files changed, 366 insertions, 21 deletions
diff --git a/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-mdio.c b/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-mdio.c new file mode 100644 index 0000000000..7f13d7ca32 --- /dev/null +++ b/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-mdio.c @@ -0,0 +1,351 @@ +/***********************license start*********************************** +* Copyright (c) 2003-2017 Cavium Inc. (support@cavium.com). All rights +* reserved. +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are +* met: +* +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* * Redistributions in binary form must reproduce the above +* copyright notice, this list of conditions and the following +* disclaimer in the documentation and/or other materials provided +* with the distribution. +* +* * Neither the name of Cavium Inc. nor the names of +* its contributors may be used to endorse or promote products +* derived from this software without specific prior written +* permission. +* +* This Software, including technical data, may be subject to U.S. export +* control laws, including the U.S. Export Administration Act and its +* associated regulations, and may be subject to export or import +* regulations in other countries. +* +* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" +* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR +* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT +* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY +* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT +* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES +* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR +* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, +* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK +* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU. +***********************license end**************************************/ +#include <bdk.h> +#include <libbdk-arch/bdk-csrs-pccpf.h> +#include <libbdk-arch/bdk-csrs-smi.h> +#include <libbdk-hal/device/bdk-device.h> +#include <libbdk-hal/bdk-mdio.h> + +/* This code is an optional part of the BDK. It is only linked in + if BDK_REQUIRE() needs it */ +BDK_REQUIRE_DEFINE(MDIO); + +/* To maintain backwards compatibility for the old MDIO API we need + to lookup the MDIO device on the ECAM bus by ID. This defines + the ID */ +#define MDIO_DEVID ((BDK_PCC_PROD_E_GEN << 24) | BDK_PCC_VENDOR_E_CAVIUM | (BDK_PCC_DEV_IDL_E_SMI << 16)) + +#define BDK_MDIO_TIMEOUT 100000 /* 100 millisec */ + +/* Operating request encodings. */ +#define MDIO_CLAUSE_22_WRITE 0 +#define MDIO_CLAUSE_22_READ 1 + +#define MDIO_CLAUSE_45_ADDRESS 0 +#define MDIO_CLAUSE_45_WRITE 1 +#define MDIO_CLAUSE_45_READ_INC 2 +#define MDIO_CLAUSE_45_READ 3 + +/** + * Helper function to put MDIO interface into clause 45 mode + * + * @param bus_id + */ +static void __bdk_mdio_set_clause45_mode(const bdk_device_t *device, int bus_id) +{ + bdk_smi_x_clk_t smi_clk; + /* Put bus into clause 45 mode */ + smi_clk.u = BDK_BAR_READ(device, BDK_SMI_X_CLK(bus_id)); + if (smi_clk.s.mode != 1) + { + smi_clk.s.mode = 1; + smi_clk.s.preamble = 1; + BDK_BAR_WRITE(device, BDK_SMI_X_CLK(bus_id), smi_clk.u); + } +} + +/** + * Helper function to put MDIO interface into clause 22 mode + * + * @param bus_id + */ +static void __bdk_mdio_set_clause22_mode(const bdk_device_t *device, int bus_id) +{ + bdk_smi_x_clk_t smi_clk; + /* Put bus into clause 22 mode */ + smi_clk.u = BDK_BAR_READ(device, BDK_SMI_X_CLK(bus_id)); + if (smi_clk.s.mode != 0) + { + smi_clk.s.mode = 0; + BDK_BAR_WRITE(device, BDK_SMI_X_CLK(bus_id), smi_clk.u); + } +} + +/** + * @INTERNAL + * Function to read SMIX_RD_DAT and check for timeouts. This + * code sequence is done fairly often, so put in in one spot. + * + * @param bus_id SMI/MDIO bus to read + * + * @return Value of SMIX_RD_DAT. pending will be set on + * a timeout. + */ +static bdk_smi_x_rd_dat_t __bdk_mdio_read_rd_dat(const bdk_device_t *device, int bus_id) +{ + bdk_smi_x_rd_dat_t smi_rd; + uint64_t done = bdk_clock_get_count(BDK_CLOCK_TIME) + (uint64_t)BDK_MDIO_TIMEOUT * + bdk_clock_get_rate(bdk_numa_local(), BDK_CLOCK_TIME) / 1000000; + do + { + smi_rd.u = BDK_BAR_READ(device, BDK_SMI_X_RD_DAT(bus_id)); + } while (smi_rd.s.pending && (bdk_clock_get_count(BDK_CLOCK_TIME) < done)); + return smi_rd; +} + + +/** + * Perform an MII read. This function is used to read PHY + * registers controlling auto negotiation. + * + * @param bus_id MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @param phy_id The MII phy id + * @param location Register location to read + * + * @return Result from the read or -1 on failure + */ +int bdk_mdio_read(bdk_node_t node, int bus_id, int phy_id, int location) +{ + const bdk_device_t *device = bdk_device_lookup(node, MDIO_DEVID, 0); + if (!device) + { + bdk_error("MDIO: ECAM device not found\n"); + return -1; + } + bdk_smi_x_cmd_t smi_cmd; + bdk_smi_x_rd_dat_t smi_rd; + + __bdk_mdio_set_clause22_mode(device, bus_id); + + smi_cmd.u = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = location; + BDK_BAR_WRITE(device, BDK_SMI_X_CMD(bus_id), smi_cmd.u); + + smi_rd = __bdk_mdio_read_rd_dat(device, bus_id); + if (smi_rd.s.val) + return smi_rd.s.dat; + else + return -1; +} + + +/** + * Perform an MII write. This function is used to write PHY + * registers controlling auto negotiation. + * + * @param bus_id MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @param phy_id The MII phy id + * @param location Register location to write + * @param val Value to write + * + * @return -1 on error + * 0 on success + */ +int bdk_mdio_write(bdk_node_t node, int bus_id, int phy_id, int location, int val) +{ + const bdk_device_t *device = bdk_device_lookup(node, MDIO_DEVID, 0); + if (!device) + { + bdk_error("MDIO: ECAM device not found\n"); + return -1; + } + bdk_smi_x_cmd_t smi_cmd; + bdk_smi_x_wr_dat_t smi_wr; + + __bdk_mdio_set_clause22_mode(device, bus_id); + + smi_wr.u = 0; + smi_wr.s.dat = val; + BDK_BAR_WRITE(device, BDK_SMI_X_WR_DAT(bus_id), smi_wr.u); + + smi_cmd.u = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = location; + BDK_BAR_WRITE(device, BDK_SMI_X_CMD(bus_id), smi_cmd.u); + + if (BDK_BAR_WAIT_FOR_FIELD(device, BDK_SMI_X_WR_DAT(bus_id), pending, ==, 0, BDK_MDIO_TIMEOUT)) + return -1; + + return 0; +} + +/** + * Perform an IEEE 802.3 clause 45 MII read. This function is used to read PHY + * registers controlling auto negotiation. + * + * @param bus_id MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @param phy_id The MII phy id + * @param device MDIO Manageable Device (MMD) id + * @param location Register location to read + * + * @return Result from the read or -1 on failure + */ + +int bdk_mdio_45_read(bdk_node_t node, int bus_id, int phy_id, int device, int location) +{ + const bdk_device_t *ecam_device = bdk_device_lookup(node, MDIO_DEVID, 0); + if (!ecam_device) + { + bdk_error("MDIO: ECAM device not found\n"); + return -1; + } + bdk_smi_x_cmd_t smi_cmd; + bdk_smi_x_rd_dat_t smi_rd; + bdk_smi_x_wr_dat_t smi_wr; + + __bdk_mdio_set_clause45_mode(ecam_device, bus_id); + + smi_wr.u = 0; + smi_wr.s.dat = location; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_WR_DAT(bus_id), smi_wr.u); + + smi_cmd.u = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_CMD(bus_id), smi_cmd.u); + + if (BDK_BAR_WAIT_FOR_FIELD(ecam_device, BDK_SMI_X_WR_DAT(bus_id), pending, ==, 0, BDK_MDIO_TIMEOUT)) + { + bdk_error("bdk_mdio_45_read: bus_id %d phy_id %2d device %2d register %2d TIME OUT(address)\n", bus_id, phy_id, device, location); + return -1; + } + + smi_cmd.u = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_CMD(bus_id), smi_cmd.u); + + smi_rd = __bdk_mdio_read_rd_dat(ecam_device, bus_id); + if (smi_rd.s.pending) + { + bdk_error("bdk_mdio_45_read: bus_id %d phy_id %2d device %2d register %2d TIME OUT(data)\n", bus_id, phy_id, device, location); + return -1; + } + + if (smi_rd.s.val) + return smi_rd.s.dat; + else + { + bdk_error("bdk_mdio_45_read: bus_id %d phy_id %2d device %2d register %2d INVALID READ\n", bus_id, phy_id, device, location); + return -1; + } +} + +/** + * Perform an IEEE 802.3 clause 45 MII write. This function is used to write PHY + * registers controlling auto negotiation. + * + * @param bus_id MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @param phy_id The MII phy id + * @param device MDIO Manageable Device (MMD) id + * @param location Register location to write + * @param val Value to write + * + * @return -1 on error + * 0 on success + */ +int bdk_mdio_45_write(bdk_node_t node, int bus_id, int phy_id, int device, int location, + int val) +{ + const bdk_device_t *ecam_device = bdk_device_lookup(node, MDIO_DEVID, 0); + if (!ecam_device) + { + bdk_error("MDIO: ECAM device not found\n"); + return -1; + } + bdk_smi_x_cmd_t smi_cmd; + bdk_smi_x_wr_dat_t smi_wr; + + __bdk_mdio_set_clause45_mode(ecam_device, bus_id); + + smi_wr.u = 0; + smi_wr.s.dat = location; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_WR_DAT(bus_id), smi_wr.u); + + smi_cmd.u = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_CMD(bus_id), smi_cmd.u); + + if (BDK_BAR_WAIT_FOR_FIELD(ecam_device, BDK_SMI_X_WR_DAT(bus_id), pending, ==, 0, BDK_MDIO_TIMEOUT)) + return -1; + + smi_wr.u = 0; + smi_wr.s.dat = val; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_WR_DAT(bus_id), smi_wr.u); + + smi_cmd.u = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + BDK_BAR_WRITE(ecam_device, BDK_SMI_X_CMD(bus_id), smi_cmd.u); + + if (BDK_BAR_WAIT_FOR_FIELD(ecam_device, BDK_SMI_X_WR_DAT(bus_id), pending, ==, 0, BDK_MDIO_TIMEOUT)) + return -1; + + return 0; +} + +/** + * MDIO init() function + * + * @param device MDIO/SMI to initialize + * + * @return Zero on success, negative on failure + */ +int bdk_mdio_init(bdk_node_t node) +{ + const bdk_device_t *device = bdk_device_lookup(node, MDIO_DEVID, 0); + if (!device) + { + bdk_error("MDIO: ECAM device not found\n"); + return -1; + } + /* Change drive strength bits to fix issues when a QLM cable + is connected, creating a long spur path */ + BDK_CSR_MODIFY(c, device->node, BDK_SMI_DRV_CTL, + c.s.pctl = 7; /* 30 ohm */ + c.s.nctl = 7); /* 30 ohm */ + + for (int i = 0; i < 2; i++) + BDK_BAR_MODIFY(c, device, BDK_SMI_X_EN(i), c.s.en = 1); + + return 0; +} + diff --git a/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-rnm.c b/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-rnm.c index 8394ad8c5e..c3a71f79dc 100644 --- a/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-rnm.c +++ b/src/vendorcode/cavium/bdk/libbdk-driver/bdk-driver-rnm.c @@ -22,7 +22,8 @@ * * This Software, including technical data, may be subject to U.S. export * control laws, including the U.S. Export Administration Act and its -* associated regulations, and may be subject to export or import +* associateint bdk_rng_init(bdk_node_t node) +* d regulations, and may be subject to export or import * regulations in other countries. * * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" @@ -40,6 +41,10 @@ #include "libbdk-arch/bdk-csrs-pccpf.h" #include "libbdk-arch/bdk-csrs-rnm.h" +#include <libbdk-hal/bdk-rng.h> +#include <libbdk-hal/device/bdk-device.h> +#define RNG_DEVID ((BDK_PCC_PROD_E_GEN << 24) | BDK_PCC_VENDOR_E_CAVIUM | (BDK_PCC_DEV_IDL_E_RNM << 16)) + BDK_REQUIRE_DEFINE(RNM); /** @@ -84,32 +89,26 @@ uint64_t bdk_rng_get_random64(void) } /** - * The RNM probe function - * - * @param device RNM to probe - * - * @return Zero on success, negative on failure - */ -static int probe(bdk_device_t *device) -{ - bdk_device_rename(device, "N%d.RNM%d", device->node, device->instance); - return 0; -} - -/** * RNM init() function * * @param device RNM to initialize * * @return Zero on success, negative on failure */ -static int init(bdk_device_t *device) +int bdk_rng_init(bdk_node_t node) { + const bdk_device_t *device = bdk_device_lookup(node, RNG_DEVID, 0); + if (!device) + { + bdk_error("RNM: ECAM device not found\n"); + return -1; + } BDK_BAR_MODIFY(c, device, BDK_RNM_CTL_STATUS, c.s.ent_en = 1; c.s.rng_en = 1); - /* Read back after enable so we know it is done. Needed on t88 pass 2.0 emulator */ + /* Read back after enable so we know it is done. Needed on t88 pass 2.0 emulator and t81 real hardware !!!! */ BDK_BAR_READ(device, BDK_RNM_CTL_STATUS); + /* Errata (RNM-22528) First consecutive reads to RNM_RANDOM return same value. Before using the random entropy, read RNM_RANDOM at least once and discard the data */ @@ -117,8 +116,3 @@ static int init(bdk_device_t *device) return 0; } -bdk_driver_t __bdk_driver_rnm = { - .id = (BDK_PCC_PROD_E_GEN << 24) | BDK_PCC_VENDOR_E_CAVIUM | (BDK_PCC_DEV_IDL_E_RNM << 16), - .probe = probe, - .init = init, -}; |