summaryrefslogtreecommitdiff
path: root/src/vendorcode/intel/fsp
diff options
context:
space:
mode:
authorRonak Kanabar <ronak.kanabar@intel.com>2020-06-17 18:25:33 +0530
committerPatrick Georgi <pgeorgi@google.com>2020-07-06 06:08:03 +0000
commita8b80942a08177cb6c318f084e6a9c17668753fc (patch)
treeb5e6d1185ffbc075956b68efc6786f5006d5965e /src/vendorcode/intel/fsp
parent4d38c7546c702a60cae024f8681744264174f808 (diff)
downloadcoreboot-a8b80942a08177cb6c318f084e6a9c17668753fc.tar.xz
vendorcode/intel/fsp: Add Jasper Lake FSP headers for FSP v2194
The FSP-M/S headers added are generated as per FSP v2194. BUG=b:159193895 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: TBD Change-Id: I0cd84fdb0089bf8ea3f4440e89fdee7f11119751 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42471 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/vendorcode/intel/fsp')
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h2266
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h2338
2 files changed, 4452 insertions, 152 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
index 7bcd6c09f0..3af6fade3d 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
@@ -55,9 +55,10 @@ typedef struct {
**/
typedef struct {
-/** Offset 0x0040 - Reserved
+/** Offset 0x0040 - Platform Reserved Memory Size
+ The minimum platform memory size required to pass control into DXE
**/
- UINT8 Reserved0[8];
+ UINT64 PlatformMemorySize;
/** Offset 0x0048 - SPD Data Length
Length of SPD Data
@@ -65,9 +66,15 @@ typedef struct {
**/
UINT16 MemorySpdDataLen;
-/** Offset 0x004A - Reserved
+/** Offset 0x004A - Enable above 4GB MMIO resource support
+ Enable/disable above 4GB MMIO resource support
+ $EN_DIS
+**/
+ UINT8 EnableAbove4GBMmio;
+
+/** Offset 0x004B - Reserved
**/
- UINT8 Reserved1[2];
+ UINT8 Reserved0;
/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 0
Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
@@ -132,9 +139,41 @@ typedef struct {
**/
UINT8 CaVrefConfig;
-/** Offset 0x0096 - Reserved
+/** Offset 0x0096 - Smram Mask
+ The SMM Regions AB-SEG and/or H-SEG reserved
+ 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both
+**/
+ UINT8 SmramMask;
+
+/** Offset 0x0097 - MRC Fast Boot
+ Enables/Disable the MRC fast path thru the MRC
+ $EN_DIS
+**/
+ UINT8 MrcFastBoot;
+
+/** Offset 0x0098 - LPDDR4 Write DQ/DQS Retraining
+ Enables/Disable LPDDR4 Write DQ/DQS Retraining
+ $EN_DIS
+**/
+ UINT8 Lp4DqsOscEn;
+
+/** Offset 0x0099 - Reserved
+**/
+ UINT8 Reserved1;
+
+/** Offset 0x009A - Rank Margin Tool per Task
+ This option enables the user to execute Rank Margin Tool per major training step
+ in the MRC.
+ $EN_DIS
+**/
+ UINT8 RmtPerTask;
+
+/** Offset 0x009B - Training Trace
+ This option enables the trained state tracing feature in MRC. This feature will
+ print out the key training parameters state across major training steps.
+ $EN_DIS
**/
- UINT8 Reserved2[6];
+ UINT8 TrainTrace;
/** Offset 0x009C - Tseg Size
Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
@@ -142,9 +181,35 @@ typedef struct {
**/
UINT32 TsegSize;
-/** Offset 0x00A0 - Reserved
+/** Offset 0x00A0 - MMIO Size
+ Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
+**/
+ UINT16 MmioSize;
+
+/** Offset 0x00A2 - LowSupplyEnData
+ Enable: Enable Low Supply for LPDDR4 Data, Disable(Default)
+ $EN_DIS
+**/
+ UINT8 LowSupplyEnData;
+
+/** Offset 0x00A3 - LowSupplyEnCcc
+ Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default)
+ $EN_DIS
+**/
+ UINT8 LowSupplyEnCcc;
+
+/** Offset 0x00A4 - Memory Test on Warm Boot
+ Run Base Memory Test on Warm Boot
+ 0:Disable, 1:Enable
+**/
+ UINT8 MemTestOnWarmBoot;
+
+/** Offset 0x00A5 - Probeless Trace
+ Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
+ This also requires IED to be enabled.
+ $EN_DIS
**/
- UINT8 Reserved3[6];
+ UINT8 ProbelessTrace;
/** Offset 0x00A6 - Enable SMBus
Enable/disable SMBus controller.
@@ -169,9 +234,18 @@ typedef struct {
**/
UINT8 PlatformDebugConsent;
-/** Offset 0x00AC - Reserved
+/** Offset 0x00AC - DCI Enable
+ Determine if to enable DCI debug from host
+ $EN_DIS
+**/
+ UINT8 DciEn;
+
+/** Offset 0x00AD - DCI DbC Mode
+ Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
+ Set both USB2/3DBCEN; No Change: Comply with HW value
+ 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
**/
- UINT8 Reserved4[2];
+ UINT8 DciDbcMode;
/** Offset 0x00AE - Enable DCI ModPHY Pwoer Gate
Enable ModPHY Pwoer Gate when DCI is enabled
@@ -179,9 +253,12 @@ typedef struct {
**/
UINT8 DciModphyPg;
-/** Offset 0x00AF - Reserved
+/** Offset 0x00AF - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
+ This BIOS option enables kernel and platform debug for USB3 interface over a UFP
+ Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
+ 0:Disabled, 1:Enabled, 2:No Change
**/
- UINT8 Reserved5;
+ UINT8 DciUsb3TypecUfpDbg;
/** Offset 0x00B0 - PCH Trace Hub Mode
Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
@@ -190,9 +267,40 @@ typedef struct {
**/
UINT8 PchTraceHubMode;
-/** Offset 0x00B1 - Reserved
+/** Offset 0x00B1 - PCH Trace Hub Memory Region 0 buffer Size
+ Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg0Size;
+
+/** Offset 0x00B2 - PCH Trace Hub Memory Region 1 buffer Size
+ Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg1Size;
+
+/** Offset 0x00B3 - Reserved
+**/
+ UINT8 Reserved2[7];
+
+/** Offset 0x00BA - State of X2APIC_OPT_OUT bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 X2ApicOptOut;
+
+/** Offset 0x00BB - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
**/
- UINT8 Reserved6[47];
+ UINT8 DmaControlGuarantee;
+
+/** Offset 0x00BC - Base addresses for VT-d function MMIO access
+ Base addresses for VT-d MMIO access per VT-d engine
+**/
+ UINT32 VtdBaseAddress[9];
/** Offset 0x00E0 - Disable VT-d
0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
@@ -202,7 +310,7 @@ typedef struct {
/** Offset 0x00E1 - Reserved
**/
- UINT8 Reserved7[3];
+ UINT8 Reserved3[3];
/** Offset 0x00E4 - Internal Graphics Pre-allocated Memory
Size of memory preallocated for internal graphics.
@@ -218,9 +326,11 @@ typedef struct {
**/
UINT8 InternalGfx;
-/** Offset 0x00E6 - Reserved
+/** Offset 0x00E6 - Aperture Size
+ Select the Aperture Size.
+ 0:128 MB, 1:256 MB, 2:512 MB
**/
- UINT8 Reserved8;
+ UINT8 ApertureSize;
/** Offset 0x00E7 - Board Type
MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
@@ -229,9 +339,12 @@ typedef struct {
**/
UINT8 UserBd;
-/** Offset 0x00E8 - Reserved
+/** Offset 0x00E8 - DDR Frequency Limit
+ Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
+ 2133, 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
**/
- UINT8 Reserved9[2];
+ UINT16 DdrFreqLimit;
/** Offset 0x00EA - SA GV
System Agent dynamic frequency support and when enabled memory will be training
@@ -240,9 +353,25 @@ typedef struct {
**/
UINT8 SaGv;
-/** Offset 0x00EB - Reserved
+/** Offset 0x00EB - DDR Speed Control
+ DDR Frequency and Gear control for all SAGV points.
+ 0:Auto, 1:Manual
+**/
+ UINT8 DdrSpeedControl;
+
+/** Offset 0x00EC - Low Frequency
+ SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133,
+ 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
**/
- UINT8 Reserved10[5];
+ UINT16 FreqSaGvLow;
+
+/** Offset 0x00EE - Mid Frequency
+ SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133,
+ 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 FreqSaGvMid;
/** Offset 0x00F0 - Rank Margin Tool
Enable/disable Rank Margin Tool.
@@ -250,9 +379,61 @@ typedef struct {
**/
UINT8 RMT;
-/** Offset 0x00F1 - Reserved
+/** Offset 0x00F1 - Channel A DIMM Control
+ Channel A DIMM Control Support - Enable or Disable Dimms on Channel A.
+ 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
+**/
+ UINT8 DisableDimmChannel0;
+
+/** Offset 0x00F2 - Channel B DIMM Control
+ Channel B DIMM Control Support - Enable or Disable Dimms on Channel B.
+ 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
+**/
+ UINT8 DisableDimmChannel1;
+
+/** Offset 0x00F3 - Scrambler Support
+ This option enables data scrambling in memory.
+ $EN_DIS
+**/
+ UINT8 ScramblerSupport;
+
+/** Offset 0x00F4 - Ddr4OneDpc
+ DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
+ or on both (default)
+ 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled
**/
- UINT8 Reserved11[24];
+ UINT8 Ddr4OneDpc;
+
+/** Offset 0x00F5 - Reserved
+**/
+ UINT8 Reserved4[3];
+
+/** Offset 0x00F8 - MMA Test Content Pointer
+ Pointer to MMA Test Content in Memory
+**/
+ UINT32 MmaTestContentPtr;
+
+/** Offset 0x00FC - MMA Test Content Size
+ Size of MMA Test Content in Memory
+**/
+ UINT32 MmaTestContentSize;
+
+/** Offset 0x0100 - MMA Test Config Pointer
+ Pointer to MMA Test Config in Memory
+**/
+ UINT32 MmaTestConfigPtr;
+
+/** Offset 0x0104 - MMA Test Config Size
+ Size of MMA Test Config in Memory
+**/
+ UINT32 MmaTestConfigSize;
+
+/** Offset 0x0108 - SPD Profile Selected
+ Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP
+ Profile 1, 3=XMP Profile 2
+ 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2
+**/
+ UINT8 SpdProfileSelected;
/** Offset 0x0109 - Memory Reference Clock
100MHz, 133MHz.
@@ -260,9 +441,131 @@ typedef struct {
**/
UINT8 RefClk;
-/** Offset 0x010A - Reserved
+/** Offset 0x010A - Memory Voltage
+ DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM
+ chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
+ 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40
+ Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts
+**/
+ UINT16 VddVoltage;
+
+/** Offset 0x010C - Memory Ratio
+ Automatic or the frequency will equal ratio times reference clock. Set to Auto to
+ recalculate memory timings listed below.
+ 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
**/
- UINT8 Reserved12[26];
+ UINT8 Ratio;
+
+/** Offset 0x010D - QCLK Odd Ratio
+ Adds 133 or 100 MHz to QCLK frequency, depending on RefClk
+ $EN_DIS
+**/
+ UINT8 OddRatioMode;
+
+/** Offset 0x010E - tCL
+ CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tCL;
+
+/** Offset 0x010F - tCWL
+ Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tCWL;
+
+/** Offset 0x0110 - tFAW
+ Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tFAW;
+
+/** Offset 0x0112 - tRAS
+ RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tRAS;
+
+/** Offset 0x0114 - tRCD/tRP
+ RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used
+ if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
+**/
+ UINT8 tRCDtRP;
+
+/** Offset 0x0115 - SA GV Low Gear
+ Gear Selection for SAGV Low point
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvLowGear2;
+
+/** Offset 0x0116 - tREFI
+ Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tREFI;
+
+/** Offset 0x0118 - tRFC
+ Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tRFC;
+
+/** Offset 0x011A - tRRD
+ Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tRRD;
+
+/** Offset 0x011B - tRTP
+ Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal
+ values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tRTP;
+
+/** Offset 0x011C - tWR
+ Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
+ 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
+ 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
+ 34:34, 40:40
+**/
+ UINT8 tWR;
+
+/** Offset 0x011D - tWTR
+ Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tWTR;
+
+/** Offset 0x011E - NMode
+ System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
+**/
+ UINT8 NModeSupport;
+
+/** Offset 0x011F - DllBwEn[0]
+ DllBwEn[0], for 1067 (0..7)
+**/
+ UINT8 DllBwEn0;
+
+/** Offset 0x0120 - DllBwEn[1]
+ DllBwEn[1], for 1333 (0..7)
+**/
+ UINT8 DllBwEn1;
+
+/** Offset 0x0121 - DllBwEn[2]
+ DllBwEn[2], for 1600 (0..7)
+**/
+ UINT8 DllBwEn2;
+
+/** Offset 0x0122 - DllBwEn[3]
+ DllBwEn[3], for 1867 and up (0..7)
+**/
+ UINT8 DllBwEn3;
+
+/** Offset 0x0123 - ISVT IO Port Address
+ ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default
+**/
+ UINT8 IsvtIoPort;
/** Offset 0x0124 - Enable Intel HD Audio (Azalia)
0: Disable, 1: Enable (Default) Azalia controller
@@ -277,9 +580,209 @@ typedef struct {
**/
UINT8 CpuTraceHubMode;
-/** Offset 0x0126 - Reserved
+/** Offset 0x0126 - CPU Trace Hub Memory Region 0
+ CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg0Size;
+
+/** Offset 0x0127 - CPU Trace Hub Memory Region 1
+ CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
**/
- UINT8 Reserved13[98];
+ UINT8 CpuTraceHubMemReg1Size;
+
+/** Offset 0x0128 - SA GV Mid Gear
+ Gear Selection for SAGV Mid point
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvMidGear2;
+
+/** Offset 0x0129 - SA GV High Gear
+ Gear Selection for SAGV High point, or when SAGV is disabled
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvHighGear2;
+
+/** Offset 0x012A - HECI Timeouts
+ 0: Disable, 1: Enable (Default) timeout check for HECI
+ $EN_DIS
+**/
+ UINT8 HeciTimeouts;
+
+/** Offset 0x012B - Reserved
+**/
+ UINT8 Reserved5;
+
+/** Offset 0x012C - HECI1 BAR address
+ BAR address of HECI1
+**/
+ UINT32 Heci1BarAddress;
+
+/** Offset 0x0130 - HECI2 BAR address
+ BAR address of HECI2
+**/
+ UINT32 Heci2BarAddress;
+
+/** Offset 0x0134 - HECI3 BAR address
+ BAR address of HECI3
+**/
+ UINT32 Heci3BarAddress;
+
+/** Offset 0x0138 - HG dGPU Power Delay
+ HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is
+ 300=300 microseconds
+**/
+ UINT16 HgDelayAfterPwrEn;
+
+/** Offset 0x013A - HG dGPU Reset Delay
+ HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100
+ microseconds
+**/
+ UINT16 HgDelayAfterHoldReset;
+
+/** Offset 0x013C - MMIO size adjustment for AUTO mode
+ Positive number means increasing MMIO size, Negative value means decreasing MMIO
+ size: 0 (Default)=no change to AUTO mode MMIO size
+**/
+ UINT16 MmioSizeAdjustment;
+
+/** Offset 0x013E - PCIe ASPM programming will happen in relation to the Oprom
+ Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default):
+ Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after
+ Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume
+ 0:Before, 1:After
+**/
+ UINT8 InitPcieAspmAfterOprom;
+
+/** Offset 0x013F - Selection of the primary display device
+ 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics
+ 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics
+**/
+ UINT8 PrimaryDisplay;
+
+/** Offset 0x0140 - Selection of PSMI Region size
+ 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0
+ 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB
+**/
+ UINT8 PsmiRegionSize;
+
+/** Offset 0x0141 - Reserved
+**/
+ UINT8 Reserved6[3];
+
+/** Offset 0x0144 - Temporary MMIO address for GMADR
+ Obsolete field now and it has been extended to 64 bit address, used GmAdr64
+**/
+ UINT32 GmAdr;
+
+/** Offset 0x0148 - Temporary MMIO address for GTTMMADR
+ The reference code will use this as Temporary MMIO address space to access GTTMMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
+ to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
+ + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB)
+**/
+ UINT32 GttMmAdr;
+
+/** Offset 0x014C - Selection of iGFX GTT Memory size
+ 1=2MB, 2=4MB, 3=8MB, Default is 3
+ 1:2MB, 2:4MB, 3:8MB
+**/
+ UINT16 GttSize;
+
+/** Offset 0x014E - Reserved
+**/
+ UINT8 Reserved7[24];
+
+/** Offset 0x0166 - Enable/Disable MRC TXT dependency
+ When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
+ MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
+ $EN_DIS
+**/
+ UINT8 TxtImplemented;
+
+/** Offset 0x0167 - Enable/Disable SA OcSupport
+ Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
+ $EN_DIS
+**/
+ UINT8 SaOcSupport;
+
+/** Offset 0x0168 - GT slice Voltage Mode
+ 0(Default): Adaptive, 1: Override
+ 0: Adaptive, 1: Override
+**/
+ UINT8 GtVoltageMode;
+
+/** Offset 0x0169 - Maximum GTs turbo ratio override
+ 0(Default)=Minimal/Auto, 60=Maximum
+**/
+ UINT8 GtMaxOcRatio;
+
+/** Offset 0x016A - The voltage offset applied to GT slice
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 GtVoltageOffset;
+
+/** Offset 0x016C - The GT slice voltage override which is applied to the entire range of GT frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtVoltageOverride;
+
+/** Offset 0x016E - adaptive voltage applied during turbo frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtExtraTurboVoltage;
+
+/** Offset 0x0170 - voltage offset applied to the SA
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 SaVoltageOffset;
+
+/** Offset 0x0172 - PCIe root port Function number for Hybrid Graphics dGPU
+ Root port Index number to indicate which PCIe root port has dGPU
+**/
+ UINT8 RootPortIndex;
+
+/** Offset 0x0173 - Realtime Memory Timing
+ 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
+ realtime memory timing changes after MRC_DONE.
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 RealtimeMemoryTiming;
+
+/** Offset 0x0174 - Enable/Disable SA IPU
+ Enable(Default): Enable SA IPU, Disable: Disable SA IPU
+ $EN_DIS
+**/
+ UINT8 SaIpuEnable;
+
+/** Offset 0x0175 - IPU IMR Configuration
+ 0:IPU Camera, 1:IPU Gen Default is 0
+ 0:IPU Camera, 1:IPU Gen
+**/
+ UINT8 SaIpuImrConfiguration;
+
+/** Offset 0x0176 - IMGU CLKOUT Configuration
+ The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 ImguClkOutEn[6];
+
+/** Offset 0x017C - Reserved
+**/
+ UINT8 Reserved8[10];
+
+/** Offset 0x0186 - Selection of PSMI Support On/Off
+ 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support
+ $EN_DIS
+**/
+ UINT8 GtPsmiSupport;
+
+/** Offset 0x0187 - Reserved
+**/
+ UINT8 Reserved9;
/** Offset 0x0188 - Program GPIOs for LFP on DDI port-A device
0=Disabled,1(Default)=eDP, 2=MIPI DSI
@@ -289,7 +792,7 @@ typedef struct {
/** Offset 0x0189 - Reserved
**/
- UINT8 Reserved14[2];
+ UINT8 Reserved10[2];
/** Offset 0x018B - Enable or disable HPD of DDI port B
0=Disable, 1(Default)=Enable
@@ -303,9 +806,33 @@ typedef struct {
**/
UINT8 DdiPortCHpd;
-/** Offset 0x018D - Reserved
+/** Offset 0x018D - Enable or disable HPD of DDI port 1
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort1Hpd;
+
+/** Offset 0x018E - Enable or disable HPD of DDI port 2
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
**/
- UINT8 Reserved15[5];
+ UINT8 DdiPort2Hpd;
+
+/** Offset 0x018F - Enable or disable HPD of DDI port 3
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort3Hpd;
+
+/** Offset 0x0190 - Enable or disable HPD of DDI port 4
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort4Hpd;
+
+/** Offset 0x0191 - Reserved
+**/
+ UINT8 Reserved11;
/** Offset 0x0192 - Enable or disable DDC of DDI port B
0=Disable, 1(Default)=Enable
@@ -319,18 +846,177 @@ typedef struct {
**/
UINT8 DdiPortCDdc;
-/** Offset 0x0194 - Reserved
+/** Offset 0x0194 - Enable DDC setting of DDI Port 1
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort1Ddc;
+
+/** Offset 0x0195 - Enable DDC setting of DDI Port 2
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort2Ddc;
+
+/** Offset 0x0196 - Enable DDC setting of DDI Port 3
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort3Ddc;
+
+/** Offset 0x0197 - Enable DDC setting of DDI Port 4
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort4Ddc;
+
+/** Offset 0x0198 - Reserved
+**/
+ UINT8 Reserved12[130];
+
+/** Offset 0x021A - DMI Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 DmiMaxLinkSpeed;
+
+/** Offset 0x021B - DMI Equalization Phase 2
+ DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
+ AUTO - Use the current default method
+ 0:Disable phase2, 1:Enable phase2, 2:Auto
+**/
+ UINT8 DmiGen3EqPh2Enable;
+
+/** Offset 0x021C - DMI Gen3 Equalization Phase3
+ DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 DmiGen3EqPh3Method;
+
+/** Offset 0x021D - Enable/Disable DMI GEN3 Static EQ Phase1 programming
+ Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
+ Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiGen3ProgramStaticEq;
+
+/** Offset 0x021E - DeEmphasis control for DMI
+ DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB
+ 0: -6dB, 1: -3.5dB
+**/
+ UINT8 DmiDeEmphasis;
+
+/** Offset 0x021F - DMI Gen3 Root port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+**/
+ UINT8 DmiGen3RootPortPreset[8];
+
+/** Offset 0x0227 - DMI Gen3 End port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+**/
+ UINT8 DmiGen3EndPointPreset[8];
+
+/** Offset 0x022F - DMI Gen3 End port Hint values per lane
+ Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 DmiGen3EndPointHint[8];
+
+/** Offset 0x0237 - DMI Gen3 RxCTLEp per-Bundle control
+ Range: 0-15, 0 is default for each bundle, must be specified based upon platform design
+**/
+ UINT8 DmiGen3RxCtlePeaking[4];
+
+/** Offset 0x023B - BIST on Reset
+ Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 BistOnReset;
+
+/** Offset 0x023C - Skip Stop PBET Timer Enable/Disable
+ Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 SkipStopPbet;
+
+/** Offset 0x023D - Over clocking support
+ Over clocking support; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 OcSupport;
+
+/** Offset 0x023E - Over clocking Lock
+ Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
**/
- UINT8 Reserved16[176];
+ UINT8 OcLock;
+
+/** Offset 0x023F - Maximum Core Turbo Ratio Override
+ Maximum core turbo ratio override allows to increase CPU core frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 CoreMaxOcRatio;
+
+/** Offset 0x0240 - Core voltage mode
+ Core voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 CoreVoltageMode;
+
+/** Offset 0x0241 - Maximum clr turbo ratio override
+ Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 RingMaxOcRatio;
+
+/** Offset 0x0242 - Hyper Threading Enable/Disable
+ Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 HyperThreading;
+
+/** Offset 0x0243 - Enable or Disable CPU Ratio Override
+ Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CpuRatioOverride;
/** Offset 0x0244 - CPU ratio value
CPU ratio value. Valid Range 0 to 63
**/
UINT8 CpuRatio;
-/** Offset 0x0245 - Reserved
+/** Offset 0x0245 - Boot frequency
+ Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.
+ 1: Maximum non-turbo performance. <b>2: Turbo performance </b>
+ 0:0, 1:1, 2:2
**/
- UINT8 Reserved17[4];
+ UINT8 BootFrequency;
+
+/** Offset 0x0246 - Number of active cores
+ Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2:
+ 2 </b>;<b>3: 3 </b>
+ 0:All, 1:1, 2:2, 3:3
+**/
+ UINT8 ActiveCoreCount;
+
+/** Offset 0x0247 - Processor Early Power On Configuration FCLK setting
+ <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.-
+ 2: 400 MHz. - 3: Reserved
+ 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved
+**/
+ UINT8 FClkFrequency;
+
+/** Offset 0x0248 - Set JTAG power in C10 and deeper power states
+ False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10
+ and deeper power states for debug purpose. <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 JtagC10PowerGateDisable;
/** Offset 0x0249 - Enable or Disable VMX
Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
@@ -338,9 +1024,109 @@ typedef struct {
**/
UINT8 VmxEnable;
-/** Offset 0x024A - Reserved
+/** Offset 0x024A - AVX2 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx2RatioOffset;
+
+/** Offset 0x024B - AVX3 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx3RatioOffset;
+
+/** Offset 0x024C - BCLK Adaptive Voltage Enable
+ When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
+ Disable;<b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 BclkAdaptiveVoltage;
+
+/** Offset 0x024D - Reserved
+**/
+ UINT8 Reserved13;
+
+/** Offset 0x024E - core voltage override
+ The core voltage override which is applied to the entire range of cpu core frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageOverride;
+
+/** Offset 0x0250 - Core Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageAdaptive;
+
+/** Offset 0x0252 - Core Turbo voltage Offset
+ The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
+**/
+ UINT16 CoreVoltageOffset;
+
+/** Offset 0x0254 - Core PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 CorePllVoltageOffset;
+
+/** Offset 0x0255 - Ring Downbin
+ Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
+ lower than the core ratio.0: Disable; <b>1: Enable.</b>
+ $EN_DIS
+**/
+ UINT8 RingDownBin;
+
+/** Offset 0x0256 - Ring voltage mode
+ Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 RingVoltageMode;
+
+/** Offset 0x0257 - TjMax Offset
+ TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
+ TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
+**/
+ UINT8 TjMaxOffset;
+
+/** Offset 0x0258 - Ring voltage override
+ The ring voltage override which is applied to the entire range of cpu ring frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageOverride;
+
+/** Offset 0x025A - Ring Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageAdaptive;
+
+/** Offset 0x025C - Ring Turbo voltage Offset
+ The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
+**/
+ UINT16 RingVoltageOffset;
+
+/** Offset 0x025E - Enable CPU CrashLog
+ Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
+
+/** Offset 0x025F - Reserved
+**/
+ UINT8 Reserved14[9];
+
+/** Offset 0x0268 - CPU Run Control
+ Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
+ No Change</b>
+ 0:Disabled, 1:Enabled, 2:No Change
**/
- UINT8 Reserved18[32];
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x0269 - CPU Run Control Lock
+ Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
/** Offset 0x026A - BiosGuard
Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
@@ -348,9 +1134,19 @@ typedef struct {
**/
UINT8 BiosGuard;
-/** Offset 0x026B - Reserved
+/** Offset 0x026B
+**/
+ UINT8 BiosGuardToolsInterface;
+
+/** Offset 0x026C - Txt
+ Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 Txt;
+
+/** Offset 0x026D - Reserved
**/
- UINT8 Reserved19[5];
+ UINT8 Reserved15[3];
/** Offset 0x0270 - PrmrrSize
Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
@@ -362,9 +1158,252 @@ typedef struct {
**/
UINT32 SinitMemorySize;
-/** Offset 0x0278 - Reserved
+/** Offset 0x0278 - TxtDprMemoryBase
+ Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
+**/
+ UINT64 TxtDprMemoryBase;
+
+/** Offset 0x0280 - TxtHeapMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
+**/
+ UINT32 TxtHeapMemorySize;
+
+/** Offset 0x0284 - TxtDprMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable
+**/
+ UINT32 TxtDprMemorySize;
+
+/** Offset 0x0288 - BiosAcmBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 BiosAcmBase;
+
+/** Offset 0x028C - BiosAcmSize
+ Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
+**/
+ UINT32 BiosAcmSize;
+
+/** Offset 0x0290 - ApStartupBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 ApStartupBase;
+
+/** Offset 0x0294 - TgaSize
+ Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
+**/
+ UINT32 TgaSize;
+
+/** Offset 0x0298 - TxtLcpPdBase
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
+**/
+ UINT64 TxtLcpPdBase;
+
+/** Offset 0x02A0 - TxtLcpPdSize
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
+**/
+ UINT64 TxtLcpPdSize;
+
+/** Offset 0x02A8 - IsTPMPresence
+ IsTPMPresence default values
+**/
+ UINT8 IsTPMPresence;
+
+/** Offset 0x02A9 - Reserved
+**/
+ UINT8 Reserved16[6];
+
+/** Offset 0x02AF - Enable PCH HSIO PCIE Rx Set Ctle
+ Enable PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtleEnable[24];
+
+/** Offset 0x02C7 - PCH HSIO PCIE Rx Set Ctle Value
+ PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtle[24];
+
+/** Offset 0x02DF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24];
+
+/** Offset 0x02F7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmp[24];
+
+/** Offset 0x030F - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24];
+
+/** Offset 0x0327 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmp[24];
+
+/** Offset 0x033F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24];
+
+/** Offset 0x0357 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmp[24];
+
+/** Offset 0x036F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmphEnable[24];
+
+/** Offset 0x0387 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
+ PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmph[24];
+
+/** Offset 0x039F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24];
+
+/** Offset 0x03B7 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5[24];
+
+/** Offset 0x03CF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24];
+
+/** Offset 0x03E7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0[24];
+
+/** Offset 0x03FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMagEnable[8];
+
+/** Offset 0x0407 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMag[8];
+
+/** Offset 0x040F - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMagEnable[8];
+
+/** Offset 0x0417 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMag[8];
+
+/** Offset 0x041F - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMagEnable[8];
+
+/** Offset 0x0427 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMag[8];
+
+/** Offset 0x042F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8];
+
+/** Offset 0x0437 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmp[8];
+
+/** Offset 0x043F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8];
+
+/** Offset 0x0447 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmp[8];
+
+/** Offset 0x044F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8];
+
+/** Offset 0x0457 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmp[8];
+
+/** Offset 0x045F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
**/
- UINT8 Reserved20[543];
+ UINT8 PchSataHsioTxGen1DeEmphEnable[8];
+
+/** Offset 0x0467 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen1DeEmph[8];
+
+/** Offset 0x046F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DeEmphEnable[8];
+
+/** Offset 0x0477 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen2DeEmph[8];
+
+/** Offset 0x047F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DeEmphEnable[8];
+
+/** Offset 0x0487 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen3DeEmph[8];
+
+/** Offset 0x048F - PCH LPC Enhance the port 8xh decoding
+ Original LPC only decodes one byte of port 80h.
+ $EN_DIS
+**/
+ UINT8 PchLpcEnhancePort8xhDecoding;
+
+/** Offset 0x0490 - PCH Port80 Route
+ Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
+ $EN_DIS
+**/
+ UINT8 PchPort80Route;
+
+/** Offset 0x0491 - Enable SMBus ARP support
+ Enable SMBus ARP support.
+ $EN_DIS
+**/
+ UINT8 SmbusArpEnable;
+
+/** Offset 0x0492 - Reserved
+**/
+ UINT8 Reserved17[2];
+
+/** Offset 0x0494 - SMBUS Base Address
+ SMBUS Base Address (IO space).
+**/
+ UINT16 PchSmbusIoBase;
+
+/** Offset 0x0496 - Enable SMBus Alert Pin
+ Enable SMBus Alert Pin.
+ $EN_DIS
+**/
+ UINT8 PchSmbAlertEnable;
/** Offset 0x0497 - Usage type for ClkSrc
0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
@@ -379,7 +1418,7 @@ typedef struct {
/** Offset 0x04B7 - Reserved
**/
- UINT8 Reserved21[5];
+ UINT8 Reserved18[5];
/** Offset 0x04BC - Enable PCIE RP Mask
Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
@@ -400,9 +1439,88 @@ typedef struct {
**/
UINT8 SerialIoUartDebugControllerNumber;
-/** Offset 0x04C2 - Reserved
+/** Offset 0x04C2 - Serial Io Uart Debug Auto Flow
+ Enables UART hardware flow control, CTS and RTS lines.
+ $EN_DIS
+**/
+ UINT8 SerialIoUartDebugAutoFlow;
+
+/** Offset 0x04C3 - Reserved
+**/
+ UINT8 Reserved19;
+
+/** Offset 0x04C4 - Serial Io Uart Debug BaudRate
+ Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
+ 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
+**/
+ UINT32 SerialIoUartDebugBaudRate;
+
+/** Offset 0x04C8 - Serial Io Uart Debug Parity
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartDebugParity;
+
+/** Offset 0x04C9 - Serial Io Uart Debug Stop Bits
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 SerialIoUartDebugStopBits;
+
+/** Offset 0x04CA - Serial Io Uart Debug Data Bits
+ Set default word length. 0: Default, 5,6,7,8
+ 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
+**/
+ UINT8 SerialIoUartDebugDataBits;
+
+/** Offset 0x04CB - Reserved
+**/
+ UINT8 Reserved20[5];
+
+/** Offset 0x04D0 - ISA Serial Base selection
+ Select ISA Serial Base address. Default is 0x3F8.
+ 0:0x3F8, 1:0x2F8
+**/
+ UINT8 PcdIsaSerialUartBase;
+
+/** Offset 0x04D1 - GT PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 GtPllVoltageOffset;
+
+/** Offset 0x04D2 - Ring PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 RingPllVoltageOffset;
+
+/** Offset 0x04D3 - System Agent PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 SaPllVoltageOffset;
+
+/** Offset 0x04D4 - Memory Controller PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 McPllVoltageOffset;
+
+/** Offset 0x04D5 - MRC Safe Config
+ Enables/Disable MRC Safe Config
+ $EN_DIS
+**/
+ UINT8 MrcSafeConfig;
+
+/** Offset 0x04D6 - PcdSerialDebugBaudRate
+ Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
+ 3:9600, 4:19200, 6:56700, 7:115200
+**/
+ UINT8 PcdSerialDebugBaudRate;
+
+/** Offset 0x04D7 - HobBufferSize
+ Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
+ total HOB size).
+ 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
**/
- UINT8 Reserved22[22];
+ UINT8 HobBufferSize;
/** Offset 0x04D8 - Early Command Training
Enables/Disable Early Command Training
@@ -410,9 +1528,17 @@ typedef struct {
**/
UINT8 ECT;
-/** Offset 0x04D9 - Reserved
+/** Offset 0x04D9 - SenseAmp Offset Training
+ Enables/Disable SenseAmp Offset Training
+ $EN_DIS
**/
- UINT8 Reserved23[2];
+ UINT8 SOT;
+
+/** Offset 0x04DA - Early ReadMPR Timing Centering 2D
+ Enables/Disable Early ReadMPR Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDMPRTC2D;
/** Offset 0x04DB - Read MPR Training
Enables/Disable Read MPR Training
@@ -420,9 +1546,47 @@ typedef struct {
**/
UINT8 RDMPRT;
-/** Offset 0x04DC - Reserved
+/** Offset 0x04DC - Receive Enable Training
+ Enables/Disable Receive Enable Training
+ $EN_DIS
+**/
+ UINT8 RCVET;
+
+/** Offset 0x04DD - Jedec Write Leveling
+ Enables/Disable Jedec Write Leveling
+ $EN_DIS
+**/
+ UINT8 JWRL;
+
+/** Offset 0x04DE - Early Write Time Centering 2D
+ Enables/Disable Early Write Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 EWRTC2D;
+
+/** Offset 0x04DF - Early Read Time Centering 2D
+ Enables/Disable Early Read Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDTC2D;
+
+/** Offset 0x04E0 - Write Timing Centering 1D
+ Enables/Disable Write Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRTC1D;
+
+/** Offset 0x04E1 - Write Voltage Centering 1D
+ Enables/Disable Write Voltage Centering 1D
+ $EN_DIS
**/
- UINT8 Reserved24[7];
+ UINT8 WRVC1D;
+
+/** Offset 0x04E2 - Read Timing Centering 1D
+ Enables/Disable Read Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDTC1D;
/** Offset 0x04E3 - Dimm ODT Training
Enables/Disable Dimm ODT Training
@@ -436,9 +1600,11 @@ typedef struct {
**/
UINT8 DIMMRONT;
-/** Offset 0x04E5 - Reserved
+/** Offset 0x04E5 - Write Drive Strength/Equalization 2D
+ Enables/Disable Write Drive Strength/Equalization 2D
+ $EN_DIS
**/
- UINT8 Reserved25;
+ UINT8 WRDSEQT;
/** Offset 0x04E6 - Write Slew Rate Training
Enables/Disable Write Slew Rate Training
@@ -464,9 +1630,23 @@ typedef struct {
**/
UINT8 RDAPT;
-/** Offset 0x04EA - Reserved
+/** Offset 0x04EA - Write Timing Centering 2D
+ Enables/Disable Write Timing Centering 2D
+ $EN_DIS
**/
- UINT8 Reserved26[3];
+ UINT8 WRTC2D;
+
+/** Offset 0x04EB - Read Timing Centering 2D
+ Enables/Disable Read Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDTC2D;
+
+/** Offset 0x04EC - Write Voltage Centering 2D
+ Enables/Disable Write Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRVC2D;
/** Offset 0x04ED - Read Voltage Centering 2D
Enables/Disable Read Voltage Centering 2D
@@ -474,9 +1654,23 @@ typedef struct {
**/
UINT8 RDVC2D;
-/** Offset 0x04EE - Reserved
+/** Offset 0x04EE - Command Voltage Centering
+ Enables/Disable Command Voltage Centering
+ $EN_DIS
+**/
+ UINT8 CMDVC;
+
+/** Offset 0x04EF - Late Command Training
+ Enables/Disable Late Command Training
+ $EN_DIS
**/
- UINT8 Reserved27[3];
+ UINT8 LCT;
+
+/** Offset 0x04F0 - Round Trip Latency Training
+ Enables/Disable Round Trip Latency Training
+ $EN_DIS
+**/
+ UINT8 RTL;
/** Offset 0x04F1 - Turn Around Timing Training
Enables/Disable Turn Around Timing Training
@@ -484,9 +1678,32 @@ typedef struct {
**/
UINT8 TAT;
-/** Offset 0x04F2 - Reserved
+/** Offset 0x04F2 - Margin Limit Check
+ Margin Limit Check. Choose level of margin check
+ 0:Disable, 1:L1, 2:L2, 3:Both
+**/
+ UINT8 MarginLimitCheck;
+
+/** Offset 0x04F3 - Reserved
**/
- UINT8 Reserved28[6];
+ UINT8 Reserved21;
+
+/** Offset 0x04F4 - Margin Limit L2
+ % of L1 check for margin limit check
+**/
+ UINT16 MarginLimitL2;
+
+/** Offset 0x04F6 - Memory Test
+ Enables/Disable Memory Test
+ $EN_DIS
+**/
+ UINT8 MEMTST;
+
+/** Offset 0x04F7 - DIMM SPD Alias Test
+ Enables/Disable DIMM SPD Alias Test
+ $EN_DIS
+**/
+ UINT8 ALIASCHK;
/** Offset 0x04F8 - Receive Enable Centering 1D
Enables/Disable Receive Enable Centering 1D
@@ -500,9 +1717,315 @@ typedef struct {
**/
UINT8 RMC;
-/** Offset 0x04FA - Reserved
+/** Offset 0x04FA - Write Drive Strength Up/Dn independently
+ Enables/Disable Write Drive Strength Up/Dn independently
+ $EN_DIS
+**/
+ UINT8 WRDSUDT;
+
+/** Offset 0x04FB - Read Voltage Centering
+ Enables/Disable Read Voltage Centering
+ $EN_DIS
+**/
+ UINT8 RDVC1D;
+
+/** Offset 0x04FC - Write TCO Comp Training
+ Enables/Disable Write TCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCO;
+
+/** Offset 0x04FD - Clock TCO Comp Training
+ Enables/Disable Clock TCO Comp Training
+ $EN_DIS
+**/
+ UINT8 CLKTCO;
+
+/** Offset 0x04FE - Dimm ODT CA Training
+ Enables/Disable Dimm ODT CA Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTCA;
+
+/** Offset 0x04FF - Write TCO Dqs Training
+ Enables/Disable Write TCO Dqs Training
+ $EN_DIS
+**/
+ UINT8 TXTCODQS;
+
+/** Offset 0x0500 - Duty Cycle Correction
+ Enables/Disable Duty Cycle Correction
+ $EN_DIS
+**/
+ UINT8 DCC;
+
+/** Offset 0x0501 - DQ DFE Training
+ Enable/Disable DQ DFE Training
+ $EN_DIS
+**/
+ UINT8 DQDFE;
+
+/** Offset 0x0502 - Sense Amplifier Correction Training
+ Enable/Disable Sense Amplifier Correction Training
+ $EN_DIS
+**/
+ UINT8 SOTC;
+
+/** Offset 0x0503 - ECC Support
+ Enables/Disable ECC Support
+ $EN_DIS
+**/
+ UINT8 EccSupport;
+
+/** Offset 0x0504 - Memory Remap
+ Enables/Disable Memory Remap
+ $EN_DIS
+**/
+ UINT8 RemapEnable;
+
+/** Offset 0x0505 - MRC Time Measure
+ Enable/Disable MRC Time Measure
+ $EN_DIS
+**/
+ UINT8 MrcTimeMeasure;
+
+/** Offset 0x0506 - MRC Force Training on Warm
+ Enables/Disable the MRC training on warm boot
+ $EN_DIS
+**/
+ UINT8 MrcTrainOnWarm;
+
+/** Offset 0x0507 - Rank Interleave support
+ Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
+ the same time.
+ $EN_DIS
+**/
+ UINT8 RankInterleave;
+
+/** Offset 0x0508 - Enhanced Interleave support
+ Enables/Disable Enhanced Interleave support
+ $EN_DIS
+**/
+ UINT8 EnhancedInterleave;
+
+/** Offset 0x0509 - Memory Trace
+ Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of
+ equal size. This option may change TOLUD and REMAP values as needed.
+ $EN_DIS
+**/
+ UINT8 MemoryTrace;
+
+/** Offset 0x050A - Ch Hash Support
+ Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
+ $EN_DIS
+**/
+ UINT8 ChHashEnable;
+
+/** Offset 0x050B - Extern Therm Status
+ Enables/Disable Extern Therm Status
+ $EN_DIS
+**/
+ UINT8 EnableExtts;
+
+/** Offset 0x050C - Closed Loop Therm Manage
+ Enables/Disable Closed Loop Therm Manage
+ $EN_DIS
+**/
+ UINT8 EnableCltm;
+
+/** Offset 0x050D - Open Loop Therm Manage
+ Enables/Disable Open Loop Therm Manage
+ $EN_DIS
+**/
+ UINT8 EnableOltm;
+
+/** Offset 0x050E - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter
+ $EN_DIS
+**/
+ UINT8 EnablePwrDn;
+
+/** Offset 0x050F - DDR PowerDown and idle counter - LPDDR
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDnLpddr;
+
+/** Offset 0x0510 - Use user provided power weights, scale factor, and channel power floor values
+ Enables/Disable Use user provided power weights, scale factor, and channel power
+ floor values
+ $EN_DIS
+**/
+ UINT8 UserPowerWeightsEn;
+
+/** Offset 0x0511 - RAPL PL Lock
+ Enables/Disable RAPL PL Lock
+ $EN_DIS
+**/
+ UINT8 RaplLim2Lock;
+
+/** Offset 0x0512 - RAPL PL 2 enable
+ Enables/Disable RAPL PL 2 enable
+ $EN_DIS
+**/
+ UINT8 RaplLim2Ena;
+
+/** Offset 0x0513 - RAPL PL 1 enable
+ Enables/Disable RAPL PL 1 enable
+ $EN_DIS
+**/
+ UINT8 RaplLim1Ena;
+
+/** Offset 0x0514 - SelfRefresh Enable
+ Enables/Disable SelfRefresh Enable
+ $EN_DIS
+**/
+ UINT8 SrefCfgEna;
+
+/** Offset 0x0515 - Throttler CKEMin Defeature - LPDDR
+ Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeatLpddr;
+
+/** Offset 0x0516 - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeat;
+
+/** Offset 0x0517 - Enable RH Prevention
+ Enables/Disable RH Prevention
+ $EN_DIS
+**/
+ UINT8 RhPrevention;
+
+/** Offset 0x0518 - Exit On Failure (MRC)
+ Enables/Disable Exit On Failure (MRC)
+ $EN_DIS
+**/
+ UINT8 ExitOnFailure;
+
+/** Offset 0x0519 - LPDDR Thermal Sensor
+ Enables/Disable LPDDR Thermal Sensor
+ $EN_DIS
+**/
+ UINT8 DdrThermalSensor;
+
+/** Offset 0x051A - EV Loader
+ Enable/Disable EV Loader Functionality
+ $EN_DIS
+**/
+ UINT8 EvLoader;
+
+/** Offset 0x051B - Reserved
+**/
+ UINT8 Reserved22;
+
+/** Offset 0x051C - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedClock;
+
+/** Offset 0x051D - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedZq;
+
+/** Offset 0x051E - Ch Hash Interleaved Bit
+ Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
+ the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
+ 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
+**/
+ UINT8 ChHashInterleaveBit;
+
+/** Offset 0x051F - Reserved
+**/
+ UINT8 Reserved23;
+
+/** Offset 0x0520 - Ch Hash Mask
+ Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
+ BITS [19:6] Default is 0x30CC
+**/
+ UINT16 ChHashMask;
+
+/** Offset 0x0522 - Reserved
+**/
+ UINT8 Reserved24[2];
+
+/** Offset 0x0524 - Base reference clock value
+ Base reference clock value, in Hertz(Default is 125Hz)
+ 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
**/
- UINT8 Reserved29[60];
+ UINT32 BClkFrequency;
+
+/** Offset 0x0528 - Extended Bank Hashing
+ Eanble/Disable ExtendedBankHashing
+ $EN_DIS
+**/
+ UINT8 ExtendedBankHashing;
+
+/** Offset 0x0529 - Energy Scale Factor
+ Energy Scale Factor, Default is 4
+**/
+ UINT8 EnergyScaleFact;
+
+/** Offset 0x052A - CMD Slew Rate Training
+ Enable/Disable CMD Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 CMDSR;
+
+/** Offset 0x052B - Reserved
+**/
+ UINT8 Reserved25;
+
+/** Offset 0x052C - EPG DIMM Idd3N
+ Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
+ a per DIMM basis. Default is 26
+**/
+ UINT16 Idd3n;
+
+/** Offset 0x052E - EPG DIMM Idd3P
+ Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
+ on a per DIMM basis. Default is 11
+**/
+ UINT16 Idd3p;
+
+/** Offset 0x0530 - CMD Drive Strength and Tx Equalization
+ Enable/Disable CMD Drive Strength and Tx Equalization
+ $EN_DIS
+**/
+ UINT8 CMDDSEQ;
+
+/** Offset 0x0531 - CMD Normalization
+ Enable/Disable CMD Normalization
+ $EN_DIS
+**/
+ UINT8 CMDNORM;
+
+/** Offset 0x0532 - Early DQ Write Drive Strength and Equalization Training
+ Enable/Disable Early DQ Write Drive Strength and Equalization Training
+ $EN_DIS
+**/
+ UINT8 EWRDSEQ;
+
+/** Offset 0x0533 - RH Activation Probability
+ RH Activation Probability, Probability value is 1/2^(inputvalue)
+**/
+ UINT8 RhActProbability;
+
+/** Offset 0x0534 - RAPL PL 2 WindowX
+ Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim2WindX;
+
+/** Offset 0x0535 - RAPL PL 2 WindowY
+ Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim2WindY;
/** Offset 0x0536 - RAPL PL 1 WindowX
Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
@@ -514,18 +2037,398 @@ typedef struct {
**/
UINT8 RaplLim1WindY;
-/** Offset 0x0538 - Reserved
+/** Offset 0x0538 - RAPL PL 2 Power
+ range[0;2^14-1]= [2047.875;0]in W, (224= Def)
**/
- UINT8 Reserved30[2];
+ UINT16 RaplLim2Pwr;
/** Offset 0x053A - RAPL PL 1 Power
range[0;2^14-1]= [2047.875;0]in W, (224= Def)
**/
UINT16 RaplLim1Pwr;
-/** Offset 0x053C - Reserved
+/** Offset 0x053C - Warm Threshold Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh0Dimm0;
+
+/** Offset 0x053D - Warm Threshold Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh0Dimm1;
+
+/** Offset 0x053E - Warm Threshold Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh1Dimm0;
+
+/** Offset 0x053F - Warm Threshold Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh1Dimm1;
+
+/** Offset 0x0540 - Hot Threshold Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh0Dimm0;
+
+/** Offset 0x0541 - Hot Threshold Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh0Dimm1;
+
+/** Offset 0x0542 - Hot Threshold Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh1Dimm0;
+
+/** Offset 0x0543 - Hot Threshold Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh1Dimm1;
+
+/** Offset 0x0544 - Warm Budget Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh0Dimm0;
+
+/** Offset 0x0545 - Warm Budget Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh0Dimm1;
+
+/** Offset 0x0546 - Warm Budget Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh1Dimm0;
+
+/** Offset 0x0547 - Warm Budget Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh1Dimm1;
+
+/** Offset 0x0548 - Hot Budget Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
- UINT8 Reserved31[68];
+ UINT8 HotBudgetCh0Dimm0;
+
+/** Offset 0x0549 - Hot Budget Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh0Dimm1;
+
+/** Offset 0x054A - Hot Budget Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh1Dimm0;
+
+/** Offset 0x054B - Hot Budget Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh1Dimm1;
+
+/** Offset 0x054C - Idle Energy Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh0Dimm0;
+
+/** Offset 0x054D - Idle Energy Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh0Dimm1;
+
+/** Offset 0x054E - Idle Energy Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh1Dimm0;
+
+/** Offset 0x054F - Idle Energy Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh1Dimm1;
+
+/** Offset 0x0550 - PowerDown Energy Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyCh0Dimm0;
+
+/** Offset 0x0551 - PowerDown Energy Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyCh0Dimm1;
+
+/** Offset 0x0552 - PowerDown Energy Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyCh1Dimm0;
+
+/** Offset 0x0553 - PowerDown Energy Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyCh1Dimm1;
+
+/** Offset 0x0554 - Activate Energy Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh0Dimm0;
+
+/** Offset 0x0555 - Activate Energy Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh0Dimm1;
+
+/** Offset 0x0556 - Activate Energy Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh1Dimm0;
+
+/** Offset 0x0557 - Activate Energy Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh1Dimm1;
+
+/** Offset 0x0558 - Read Energy Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh0Dimm0;
+
+/** Offset 0x0559 - Read Energy Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh0Dimm1;
+
+/** Offset 0x055A - Read Energy Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh1Dimm0;
+
+/** Offset 0x055B - Read Energy Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh1Dimm1;
+
+/** Offset 0x055C - Write Energy Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh0Dimm0;
+
+/** Offset 0x055D - Write Energy Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh0Dimm1;
+
+/** Offset 0x055E - Write Energy Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh1Dimm0;
+
+/** Offset 0x055F - Write Energy Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh1Dimm1;
+
+/** Offset 0x0560 - Throttler CKEMin Timer
+ Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
+ Dfault is 0x30
+**/
+ UINT8 ThrtCkeMinTmr;
+
+/** Offset 0x0561 - Cke Rank Mapping
+ Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies
+ which rank CKE[i] goes to.
+**/
+ UINT8 CkeRankMapping;
+
+/** Offset 0x0562 - Rapl Power Floor Ch0
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh0;
+
+/** Offset 0x0563 - Rapl Power Floor Ch1
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh1;
+
+/** Offset 0x0564 - Command Rate Support
+ CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
+ 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS
+**/
+ UINT8 EnCmdRate;
+
+/** Offset 0x0565 - REFRESH_2X_MODE
+ 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
+ 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
+**/
+ UINT8 Refresh2X;
+
+/** Offset 0x0566 - Energy Performance Gain
+ Enable/disable(default) Energy Performance Gain.
+ $EN_DIS
+**/
+ UINT8 EpgEnable;
+
+/** Offset 0x0567 - Row Hammer Solution
+ Type of method used to prevent Row Hammer. Default is Hardware RHP
+ 0:Hardware RHP, 1:2x Refresh
+**/
+ UINT8 RhSolution;
+
+/** Offset 0x0568 - User Manual Threshold
+ Disabled: Predefined threshold will be used.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserThresholdEnable;
+
+/** Offset 0x0569 - User Manual Budget
+ Disabled: Configuration of memories will defined the Budget value.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserBudgetEnable;
+
+/** Offset 0x056A - TcritMax
+ Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax
+ has to be greater than THIGHMax .\n
+ Critical temperature will be TcritMax
+**/
+ UINT8 TsodTcritMax;
+
+/** Offset 0x056B - Event mode
+ Disable:Comparator mode.\n
+ Enable:Interrupt mode
+ $EN_DIS
+**/
+ UINT8 TsodEventMode;
+
+/** Offset 0x056C - EVENT polarity
+ Disable:Active LOW.\n
+ Enable:Active HIGH
+ $EN_DIS
+**/
+ UINT8 TsodEventPolarity;
+
+/** Offset 0x056D - Critical event only
+ Disable:Trips on alarm or critical.\n
+ Enable:Trips only if criticaal temperature is reached
+ $EN_DIS
+**/
+ UINT8 TsodCriticalEventOnly;
+
+/** Offset 0x056E - Event output control
+ Disable:Event output disable.\n
+ Enable:Event output enabled
+ $EN_DIS
+**/
+ UINT8 TsodEventOutputControl;
+
+/** Offset 0x056F - Alarm window lock bit
+ Disable:Alarm trips are not locked and can be changed.\n
+ Enable:Alarm trips are locked and cannot be changed
+ $EN_DIS
+**/
+ UINT8 TsodAlarmwindowLockBit;
+
+/** Offset 0x0570 - Critical trip lock bit
+ Disable:Critical trip is not locked and can be changed.\n
+ Enable:Critical trip is locked and cannot be changed
+ $EN_DIS
+**/
+ UINT8 TsodCriticaltripLockBit;
+
+/** Offset 0x0571 - Shutdown mode
+ Disable:Temperature sensor enable.\n
+ Enable:Temperature sensor disable
+ $EN_DIS
+**/
+ UINT8 TsodShutdownMode;
+
+/** Offset 0x0572 - ThighMax
+ Thigh = ThighMax (Default is 93)
+**/
+ UINT8 TsodThigMax;
+
+/** Offset 0x0573 - User Manual Thig and Tcrit
+ Disabled(Default): Temperature will be given by the configuration of memories and
+ 1x or 2xrefresh rate.\n
+ Enabled: User Input will define for Thigh and Tcrit.
+ $EN_DIS
+**/
+ UINT8 TsodManualEnable;
+
+/** Offset 0x0574 - Force OLTM or 2X Refresh when needed
+ Disabled(Default): = Force OLTM.\n
+ Enabled: = Force 2x Refresh.
+ $EN_DIS
+**/
+ UINT8 ForceOltmOrRefresh2x;
+
+/** Offset 0x0575 - Pwr Down Idle Timer
+ The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
+ AUTO: 64 for ULX/ULT, 128 for DT/Halo
+**/
+ UINT8 PwdwnIdleCounter;
+
+/** Offset 0x0576 - Reserved
+**/
+ UINT8 Reserved26;
+
+/** Offset 0x0577 - Bitmask of ranks that have CA bus terminated
+ Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
+ Rank0 is terminating and Rank1 is non-terminating</b>
+**/
+ UINT8 CmdRanksTerminated;
+
+/** Offset 0x0578 - Throttler CKEMin Timer for LPDDR
+ LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH
+ (4). Dfault is 0x40
+**/
+ UINT8 ThrtCkeMinTmrLpddr;
+
+/** Offset 0x0579 - Retrain on Fast Fail
+ Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled
+ $EN_DIS
+**/
+ UINT8 RetrainOnFastFail;
+
+/** Offset 0x057A - Rank Margin Tool Per Bit
+ Enable/disable Rank Margin Tool Per Bit.
+ $EN_DIS
+**/
+ UINT8 RMTBIT;
+
+/** Offset 0x057B - PcdSerialDebugLevel
+ Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 PcdSerialDebugLevel;
+
+/** Offset 0x057C - Fivr Faults
+ Fivr Faults; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrFaults;
+
+/** Offset 0x057D - Fivr Efficiency
+ Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrEfficiency;
+
+/** Offset 0x057E - Safe Mode Support
+ This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
+ $EN_DIS
+**/
+ UINT8 SafeMode;
+
+/** Offset 0x057F - Ask MRC to clear memory content
+ Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
+ $EN_DIS
+**/
+ UINT8 CleanMemory;
/** Offset 0x0580 - LpDdrDqDqsReTraining
Enables/Disable LpDdrDqDqsReTraining
@@ -535,7 +2438,150 @@ typedef struct {
/** Offset 0x0581 - Reserved
**/
- UINT8 Reserved32[172];
+ UINT8 Reserved27;
+
+/** Offset 0x0582 - Post Code Output Port
+ This option configures Post Code Output Port
+**/
+ UINT16 PostCodeOutputPort;
+
+/** Offset 0x0584 - RMTLoopCount
+ Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
+**/
+ UINT8 RMTLoopCount;
+
+/** Offset 0x0585 - TCSS Compatible Revision ID Enable
+ Set TCSS Crid . 0:Stepping Revision ID 1:Compatible Revision ID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x0586 - Reserved
+**/
+ UINT8 Reserved28[18];
+
+/** Offset 0x0598 - Generate BIOS Data ACPI Table
+ Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
+ $EN_DIS
+**/
+ UINT8 BdatEnable;
+
+/** Offset 0x0599 - BdatTestType
+ Indicates the type of Memory Training data to populate into the BDAT ACPI table.
+ 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
+**/
+ UINT8 BdatTestType;
+
+/** Offset 0x059A - Size of PCIe IMR.
+ Size of PCIe IMR in megabytes
+**/
+ UINT16 PcieImrSize;
+
+/** Offset 0x059C - Enable PCIe IMR
+ 0: Disable(AUTO), 1: Enable
+ $EN_DIS
+**/
+ UINT8 PcieImrEnabled;
+
+/** Offset 0x059D - Reserved
+**/
+ UINT8 Reserved29[2];
+
+/** Offset 0x059F - SerialDebugMrcLevel
+ MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 SerialDebugMrcLevel;
+
+/** Offset 0x05A0 - Reserved
+**/
+ UINT8 Reserved30[18];
+
+/** Offset 0x05B2 - Skip external display device scanning
+ Enable: Do not scan for external display device, Disable (Default): Scan external
+ display devices
+ $EN_DIS
+**/
+ UINT8 SkipExtGfxScan;
+
+/** Offset 0x05B3 - Lock PCU Thermal Management registers
+ Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
+ $EN_DIS
+**/
+ UINT8 LockPTMregs;
+
+/** Offset 0x05B4 - Reserved
+**/
+ UINT8 Reserved31;
+
+/** Offset 0x05B5 - Panel Power Enable
+ Control for enabling/disabling VDD force bit (Required only for early enabling of
+ eDP panel). 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 PanelPowerEnable;
+
+/** Offset 0x05B6 - Reserved
+**/
+ UINT8 Reserved32[98];
+
+/** Offset 0x0618 - TotalFlashSize
+ Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
+**/
+ UINT16 TotalFlashSize;
+
+/** Offset 0x061A - BiosSize
+ The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard !=
+ 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected
+ Range) so that a BIOS Update Script can be stored in the DPR.
+**/
+ UINT16 BiosSize;
+
+/** Offset 0x061C - TxtAcheckRequest
+ Enable/Disable. When Enabled, after memory training is done MRC will request an
+ ACHECK (Memory Alias Check) be done by TXT.
+ $EN_DIS
+**/
+ UINT8 TxtAcheckRequest;
+
+/** Offset 0x061D - Reserved
+**/
+ UINT8 Reserved33[11];
+
+/** Offset 0x0628 - Smbus dynamic power gating
+ Disable or Enable Smbus dynamic power gating.
+ $EN_DIS
+**/
+ UINT8 SmbusDynamicPowerGating;
+
+/** Offset 0x0629 - Disable and Lock Watch Dog Register
+ Set 1 to clear WDT status, then disable and lock WDT registers.
+ $EN_DIS
+**/
+ UINT8 WdtDisableAndLock;
+
+/** Offset 0x062A - SMBUS SPD Write Disable
+ Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
+ Disable bit. For security recommendations, SPD write disable bit must be set.
+ $EN_DIS
+**/
+ UINT8 SmbusSpdWriteDisable;
+
+/** Offset 0x062B - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x062C - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
/** Offset 0x062D - Enable HD Audio Link
Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
@@ -545,7 +2591,7 @@ typedef struct {
/** Offset 0x062E - Reserved
**/
- UINT8 Reserved33[3];
+ UINT8 Reserved34[3];
/** Offset 0x0631 - Enable HD Audio DMIC_N Link
Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
@@ -554,7 +2600,7 @@ typedef struct {
/** Offset 0x0633 - Reserved
**/
- UINT8 Reserved34[17];
+ UINT8 Reserved35[17];
/** Offset 0x0644 - Enable HD Audio DSP
Enable/disable HD Audio DSP feature.
@@ -564,7 +2610,7 @@ typedef struct {
/** Offset 0x0645 - Reserved
**/
- UINT8 Reserved35[11];
+ UINT8 Reserved36[11];
/** Offset 0x0650 - Enable HD Audio SSP0 Link
Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
@@ -576,19 +2622,93 @@ typedef struct {
**/
UINT8 PchHdaAudioLinkSndwEnable[4];
-/** Offset 0x065A - Reserved
+/** Offset 0x065A - iDisp-Link Frequency
+ iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
+ 4: 96MHz, 3: 48MHz
**/
- UINT8 Reserved36[7];
+ UINT8 PchHdaIDispLinkFrequency;
-/** Offset 0x0661 - Skip MBP HOB
+/** Offset 0x065B - iDisp-Link T-mode
+ iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T
+ 0: 2T, 2: 4T, 3: 8T, 4: 16T
+**/
+ UINT8 PchHdaIDispLinkTmode;
+
+/** Offset 0x065C - iDisplay Audio Codec disconnection
+ 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
+ $EN_DIS
+**/
+ UINT8 PchHdaIDispCodecDisconnect;
+
+/** Offset 0x065D - Force ME DID Init Status
+ Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
+ ME DID init stat value
+ $EN_DIS
+**/
+ UINT8 DidInitStat;
+
+/** Offset 0x065E - CPU Replaced Polling Disable
+ Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
+ $EN_DIS
+**/
+ UINT8 DisableCpuReplacedPolling;
+
+/** Offset 0x065F - Check HECI message before send
+ Test, 0: disable, 1: enable, Enable/Disable message check.
+ $EN_DIS
+**/
+ UINT8 DisableMessageCheck;
+
+/** Offset 0x0660 - Skip MBP HOB
Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
$EN_DIS
**/
UINT8 SkipMbpHob;
-/** Offset 0x0662 - Reserved
+/** Offset 0x0661 - HECI2 Interface Communication
+ Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
+ $EN_DIS
+**/
+ UINT8 HeciCommunication2;
+
+/** Offset 0x0662 - Enable KT device
+ Test, 0: disable, 1: enable, Enable or Disable KT device.
+ $EN_DIS
+**/
+ UINT8 KtDeviceEnable;
+
+/** Offset 0x0663 - Skip CPU replacement check
+ Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check
+ $EN_DIS
+**/
+ UINT8 SkipCpuReplacementCheck;
+
+/** Offset 0x0664 - Serial Io Uart Debug Mode
+ Select SerialIo Uart Controller mode
+ 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 SerialIoUartDebugMode;
+
+/** Offset 0x0665 - Reserved
+**/
+ UINT8 Reserved37[19];
+
+/** Offset 0x0678 - Avx2 Voltage Guardband Scaling Factor
+ AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in
+ 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx2VoltageScaleFactor;
+
+/** Offset 0x0679 - Avx512 Voltage Guardband Scaling Factor
+ AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200
+ in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx512VoltageScaleFactor;
+
+/** Offset 0x067A - Reserved
**/
- UINT8 Reserved37[22];
+ UINT8 Reserved38[22];
} FSP_M_CONFIG;
/** Fsp M UPD Configuration
@@ -607,11 +2727,11 @@ typedef struct {
**/
FSP_M_CONFIG FspmConfig;
-/** Offset 0x0678
+/** Offset 0x0690
**/
- UINT8 UnusedUpdSpace19[6];
+ UINT8 UnusedUpdSpace21[6];
-/** Offset 0x067E
+/** Offset 0x0696
**/
UINT16 UpdTerminator;
} FSPM_UPD;
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
index 6ec68c414c..1328d391d1 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
@@ -85,9 +85,26 @@ typedef struct {
**/
typedef struct {
-/** Offset 0x0020 - Reserved
+/** Offset 0x0020 - Logo Pointer
+ Points to PEI Display Logo Image
**/
- UINT8 Reserved0[16];
+ UINT32 LogoPtr;
+
+/** Offset 0x0024 - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0028 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x002C - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
/** Offset 0x0030 - Graphics Configuration Ptr
Points to VBT
@@ -160,9 +177,44 @@ typedef struct {
**/
UINT8 SdCardPowerEnableActiveHigh;
-/** Offset 0x0052 - Reserved
+/** Offset 0x0052 - Use tuned DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
**/
- UINT8 Reserved1[34];
+ UINT8 SdCardUseCustomDlls;
+
+/** Offset 0x0053 - Reserved
+**/
+ UINT8 Reserved0;
+
+/** Offset 0x0054 - SdCard Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 SdCardTxCmdDelayRegValue;
+
+/** Offset 0x0058 - SdCard Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 SdCardTxDataDelay1RegValue;
+
+/** Offset 0x005C - SdCard Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 SdCardTxDataDelay2RegValue;
+
+/** Offset 0x0060 - SdCard Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 SdCardRxCmdDataDelay1RegValue;
+
+/** Offset 0x0064 - SdCard Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 SdCardRxCmdDataDelay2RegValue;
+
+/** Offset 0x0068 - Reserved
+**/
+ UINT8 Reserved1[12];
/** Offset 0x0074 - SdCard Command Pad Termination
0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
@@ -172,7 +224,27 @@ typedef struct {
/** Offset 0x0075 - Reserved
**/
- UINT8 Reserved2[135];
+ UINT8 Reserved2[124];
+
+/** Offset 0x00F1 - Show SPI controller
+ Enable/disable to show SPI controller.
+ $EN_DIS
+**/
+ UINT8 ShowSpiController;
+
+/** Offset 0x00F2 - Reserved
+**/
+ UINT8 Reserved3[2];
+
+/** Offset 0x00F4 - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x00F8 - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
/** Offset 0x00FC - Turbo Mode
Enable/Disable Turbo mode. 0: disable, 1: enable
@@ -218,7 +290,65 @@ typedef struct {
/** Offset 0x0129 - Reserved
**/
- UINT8 Reserved3[28];
+ UINT8 Reserved4[3];
+
+/** Offset 0x012C - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x0130 - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x0131 - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x0139 - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x013A - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x013B - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x013C - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x013D - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x013E - Reserved
+**/
+ UINT8 Reserved5[2];
+
+/** Offset 0x0140 - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x0144 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
/** Offset 0x0145 - Enable SATA
Enable/disable SATA controller.
@@ -246,7 +376,13 @@ typedef struct {
/** Offset 0x015C - Reserved
**/
- UINT8 Reserved4[21];
+ UINT8 Reserved6[14];
+
+/** Offset 0x016A - SPIn Default Chip Select Output
+ Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
+ options: 0:CS0, 1:CS1
+**/
+ UINT8 SerialIoSpiDefaultCsOutput[7];
/** Offset 0x0171 - SPIn Default Chip Select Mode HW/SW
Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
@@ -269,7 +405,47 @@ typedef struct {
/** Offset 0x0186 - Reserved
**/
- UINT8 Reserved5[186];
+ UINT8 Reserved7[2];
+
+/** Offset 0x0188 - Default BaudRate for each Serial IO UART
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 SerialIoUartBaudRate[7];
+
+/** Offset 0x01A4 - Default ParityType for each Serial IO UART
+ Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartParity[7];
+
+/** Offset 0x01AB - Default DataBits for each Serial IO UART
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 SerialIoUartDataBits[7];
+
+/** Offset 0x01B2 - Default StopBits for each Serial IO UART
+ Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3:
+ TwoStopBits
+**/
+ UINT8 SerialIoUartStopBits[7];
+
+/** Offset 0x01B9 - Power Gating mode for each Serial IO UART that works in COM mode
+ Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto
+**/
+ UINT8 SerialIoUartPowerGating[7];
+
+/** Offset 0x01C0 - Enable Dma for each Serial IO UART that supports it
+ Set DMA/PIO mode. 0: Disabled, 1: Enabled
+**/
+ UINT8 SerialIoUartDmaEnable[7];
+
+/** Offset 0x01C7 - Enables UART hardware flow control, CTS and RTS lines
+ Enables UART hardware flow control, CTS and RTS lines.
+**/
+ UINT8 SerialIoUartAutoFlow[7];
+
+/** Offset 0x01CE - Reserved
+**/
+ UINT8 Reserved8[114];
/** Offset 0x0240 - UART Number For Debug Purpose
UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5,
@@ -279,9 +455,11 @@ typedef struct {
**/
UINT8 SerialIoDebugUartNumber;
-/** Offset 0x0241 - Reserved
+/** Offset 0x0241 - Serial IO UART DBG2 table
+ Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b>
+ 1: Enable.
**/
- UINT8 Reserved6[7];
+ UINT8 SerialIoUartDbg2[7];
/** Offset 0x0248 - I2Cn Device Mode
Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
@@ -301,9 +479,12 @@ typedef struct {
**/
UINT32 PchSerialIoI2cSclPinMux[8];
-/** Offset 0x0290 - Reserved
+/** Offset 0x0290 - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination
+ respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on.
**/
- UINT8 Reserved7[8];
+ UINT8 PchSerialIoI2cPadsTermination[8];
/** Offset 0x0298 - USB Per Port HS Preemphasis Bias
USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
@@ -361,7 +542,34 @@ typedef struct {
/** Offset 0x0301 - Reserved
**/
- UINT8 Reserved8[81];
+ UINT8 Reserved9[72];
+
+/** Offset 0x0349 - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x034A - Reserved
+**/
+ UINT8 Reserved10[2];
+
+/** Offset 0x034C - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounce;
+
+/** Offset 0x0350 - PCH eSPI Master and Slave BME enabled
+ PCH eSPI Master and Slave BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x0351 - Reserved
+**/
+ UINT8 Reserved11;
/** Offset 0x0352 - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states
Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
@@ -370,7 +578,7 @@ typedef struct {
/** Offset 0x0353 - Reserved
**/
- UINT8 Reserved9;
+ UINT8 Reserved12;
/** Offset 0x0354 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
@@ -382,9 +590,10 @@ typedef struct {
**/
UINT8 PchFivrExtV1p05RailIccMax;
-/** Offset 0x0357 - Reserved
+/** Offset 0x0357 - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states
+ Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
**/
- UINT8 Reserved10;
+ UINT8 PchFivrExtVnnRailEnabledStates;
/** Offset 0x0358 - External Vnn Voltage Value that will be used in S0ix/Sx states
Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
@@ -437,9 +646,43 @@ typedef struct {
**/
UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
-/** Offset 0x0364 - Reserved
+/** Offset 0x0364 - Trace Hub Memory Base
+ If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
+ trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
+ memory is configured properly.
+**/
+ UINT32 TraceHubMemBase;
+
+/** Offset 0x0368 - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x0369 - Reserved
+**/
+ UINT8 Reserved13[3];
+
+/** Offset 0x036C - Pointer of ChipsetInit Binary
+ ChipsetInit Binary Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x0370 - Length of ChipsetInit Binary
+ ChipsetInit Binary Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x0374 - FIVR Dynamic Power Management
+ Enable/Disable FIVR Dynamic Power Management.
+ $EN_DIS
**/
- UINT8 Reserved11[20];
+ UINT8 PchFivrDynPm;
+
+/** Offset 0x0375 - Reserved
+**/
+ UINT8 Reserved14[3];
/** Offset 0x0378 - CNVi Configuration
This option allows for automatic detection of Connectivity Solution. [Auto Detection]
@@ -462,7 +705,7 @@ typedef struct {
/** Offset 0x037B - Reserved
**/
- UINT8 Reserved12;
+ UINT8 Reserved15;
/** Offset 0x037C - CNVi RF_RESET pin muxing
Select CNVi RF_RESET# pin depending on board routing. ICP-N: GPP_H12 = 0x2746E40C(default)
@@ -476,9 +719,154 @@ typedef struct {
**/
UINT32 CnviClkreqPinMux;
-/** Offset 0x0384 - Reserved
+/** Offset 0x0384 - Enable Host C10 reporting through eSPI
+ Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire.
+ $EN_DIS
+**/
+ UINT8 PchEspiHostC10ReportEnable;
+
+/** Offset 0x0385 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PmcUsb2PhySusPgEnable;
+
+/** Offset 0x0386 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x0387 - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x0388 - Reserved
+**/
+ UINT8 Reserved16[2];
+
+/** Offset 0x038A - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x038B - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x038C - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x038D - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x038E - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 WatchDogEnabled;
+
+/** Offset 0x038F - Manageability Mode set by Mebx
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
+ $EN_DIS
+**/
+ UINT8 ManageabilityMode;
+
+/** Offset 0x0390 - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events. Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x0391 - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx.
+ Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x0392 - OS Timer
+ 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x0394 - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x0396 - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx.
+ $EN_DIS
+**/
+ UINT8 RemoteAssistance;
+
+/** Offset 0x0397 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x0398 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx.
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x0399 - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[24];
+
+/** Offset 0x03B1 - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[24];
+
+/** Offset 0x03C9 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[24];
+
+/** Offset 0x03E1 - Reserved
+**/
+ UINT8 Reserved17;
+
+/** Offset 0x03E2 - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[24];
+
+/** Offset 0x0412 - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x0413 - Reserved
**/
- UINT8 Reserved13[145];
+ UINT8 Reserved18[2];
/** Offset 0x0415 - Enable/Disable PavpEnable
Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
@@ -502,116 +890,948 @@ typedef struct {
**/
UINT8 PeiGraphicsPeimInit;
-/** Offset 0x0418 - Reserved
+/** Offset 0x0418 - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 GnaEnable;
+
+/** Offset 0x0419 - Reserved
+**/
+ UINT8 Reserved19[11];
+
+/** Offset 0x0424 - Enable/Disable CrashLog
+ Enable(Default): Enable CPU CrashLog, Disable: Disable CPU CrashLog
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
+
+/** Offset 0x0425 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x0426 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable[5];
+
+/** Offset 0x042B - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable[5];
+
+/** Offset 0x0430 - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope[5];
+
+/** Offset 0x043A - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT16 ImonOffset[5];
+
+/** Offset 0x0444 - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable[5];
+
+/** Offset 0x0449 - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable[5];
+
+/** Offset 0x044E - Reserved
+**/
+ UINT8 Reserved20[2];
+
+/** Offset 0x0450 - Thermal Design Current time window
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 TdcTimeWindow[5];
+
+/** Offset 0x0464 - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock[5];
+
+/** Offset 0x0469 - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x046A - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/1000,
+ Range 0-63999. For an offset of 25.348, enter 25348.
+**/
+ UINT16 PsysOffset;
+
+/** Offset 0x046C - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x046D - Reserved
+**/
+ UINT8 Reserved21[21];
+
+/** Offset 0x0482 - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline[5];
+
+/** Offset 0x048C - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline[5];
+
+/** Offset 0x0496 - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
**/
- UINT8 Reserved14[152];
+ UINT16 Psi1Threshold[5];
-/** Offset 0x04B0 - Skip Multi-Processor Initialization
+/** Offset 0x04A0 - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold[5];
+
+/** Offset 0x04AA - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold[5];
+
+/** Offset 0x04B4 - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax[5];
+
+/** Offset 0x04BE - Enable VR specific mailbox command
+ VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
+ VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
+ command sent for PS4 exit issue. 11b - Reserved.
+ $EN_DIS
+**/
+ UINT8 SendVrMbxCmd;
+
+/** Offset 0x04BF - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
+
+/** Offset 0x04C0 - Skip Multi-Processor Initialization
When this is skipped, boot loader must initialize processors before SilicionInit
API. </b>0: Initialize; <b>1: Skip
$EN_DIS
**/
UINT8 SkipMpInit;
-/** Offset 0x04B1 - Reserved
+/** Offset 0x04C1 - Reserved
+**/
+ UINT8 Reserved22;
+
+/** Offset 0x04C2 - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
**/
- UINT8 Reserved15[11];
+ UINT16 FivrRfiFrequency;
-/** Offset 0x04BC - CpuMpPpi
+/** Offset 0x04C4 - FIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>;
+ Range: 0.0% to 10.0% (0-100).
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x04C5 - Reserved
+**/
+ UINT8 Reserved23[3];
+
+/** Offset 0x04C8 - CpuBistData
+ Pointer CPU BIST Data
+**/
+ UINT32 CpuBistData;
+
+/** Offset 0x04CC - CpuMpPpi
<b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI.
If not NULL, FSP will use the boot loader's implementation of multiprocessing.
See section 5.1.4 of the FSP Integration Guide for more details.
**/
UINT32 CpuMpPpi;
-/** Offset 0x04C0 - Reserved
+/** Offset 0x04D0 - CpuMpHob
+ <b>Optional</b> pointer for CpuMpHob. If the boot loader is a UEFI boot loader using
+ API mode instead of dispatch mode, and FspsUpd->FspsConfig.CpuMpPpi != NULL, then
+ FspsUpd->FspsConfig.CpuMpHob must be != NULL. See section 5.1.4 of the FSP Integration
+ Guide for more details.
+**/
+ UINT32 CpuMpHob;
+
+/** Offset 0x04D4 - Reserved
+**/
+ UINT8 Reserved24[16];
+
+/** Offset 0x04E4 - PpinSupport to view Protected Processor Inventory Number
+ Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
+ flag is set) for PPIN Support
+ 0: Disable, 1: Enable, 2: Auto
+**/
+ UINT8 PpinSupport;
+
+/** Offset 0x04E5 - Enable or Disable Minimum Voltage Override
+ Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 EnableMinVoltageOverride;
+
+/** Offset 0x04E6 - Min Voltage for Runtime
+ PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride
+ = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
**/
- UINT8 Reserved16[83];
+ UINT16 MinVoltageRuntime;
-/** Offset 0x0513 - Enable LOCKDOWN BIOS LOCK
+/** Offset 0x04E8 - Base of memory region allocated for Processor Trace
+ Base address of memory region allocated for Processor Trace. Processor Trace requires
+ 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT64 ProcessorTraceMemBase;
+
+/** Offset 0x04F0 - Memory region allocation for Processor Trace
+ Length in bytes of memory region allocated for Processor Trace. Processor Trace
+ requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT32 ProcessorTraceMemLength;
+
+/** Offset 0x04F4 - Min Voltage for C8
+ PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride =
+ 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageC8;
+
+/** Offset 0x04F6 - Reserved
+**/
+ UINT8 Reserved25[8];
+
+/** Offset 0x04FE - Enable Power Optimizer
+ Enable DMI Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 PchPwrOptEnable;
+
+/** Offset 0x04FF - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x0504 - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x0509 - Reserved
+**/
+ UINT8 Reserved26;
+
+/** Offset 0x050A - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x0514 - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x051E - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x051F - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
+**/
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x0520 - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x0521 - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
+**/
+ UINT8 PchIoApicId;
+
+/** Offset 0x0522 - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
+
+/** Offset 0x0523 - Enable LOCKDOWN BIOS LOCK
Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
protection.
$EN_DIS
**/
UINT8 PchLockDownBiosLock;
-/** Offset 0x0514 - Reserved
+/** Offset 0x0524 - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x0525 - Reserved
**/
- UINT8 Reserved17[2];
+ UINT8 Reserved27;
-/** Offset 0x0516 - RTC Cmos Memory Lock
+/** Offset 0x0526 - RTC Cmos Memory Lock
Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
and and lower 128-byte bank of RTC RAM.
$EN_DIS
**/
UINT8 RtcMemoryLock;
-/** Offset 0x0517 - Reserved
+/** Offset 0x0527 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
**/
- UINT8 Reserved18[24];
+ UINT8 PcieRpHotPlug[24];
-/** Offset 0x052F - Enable PCIE RP Pm Sci
+/** Offset 0x053F - Enable PCIE RP Pm Sci
Indicate whether the root port power manager SCI is enabled.
**/
UINT8 PcieRpPmSci[24];
-/** Offset 0x0547 - Reserved
+/** Offset 0x0557 - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
**/
- UINT8 Reserved19[24];
+ UINT8 PcieRpTransmitterHalfSwing[24];
-/** Offset 0x055F - Enable PCIE RP Clk Req Detect
+/** Offset 0x056F - Enable PCIE RP Clk Req Detect
Probe CLKREQ# signal before enabling CLKREQ# based power management.
**/
UINT8 PcieRpClkReqDetect[24];
-/** Offset 0x0577 - Reserved
+/** Offset 0x0587 - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 PcieRpAdvancedErrorReporting[24];
+
+/** Offset 0x059F - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
**/
- UINT8 Reserved20[455];
+ UINT8 PcieRpUnsupportedRequestReport[24];
-/** Offset 0x073E - PCH Pm Slp S3 Min Assert
+/** Offset 0x05B7 - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[24];
+
+/** Offset 0x05CF - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[24];
+
+/** Offset 0x05E7 - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[24];
+
+/** Offset 0x05FF - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[24];
+
+/** Offset 0x0617 - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnNonFatalError[24];
+
+/** Offset 0x062F - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[24];
+
+/** Offset 0x0647 - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 PcieRpMaxPayload[24];
+
+/** Offset 0x065F - Reserved
+**/
+ UINT8 Reserved28[13];
+
+/** Offset 0x066C - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
+ PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[24];
+
+/** Offset 0x0684 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[24];
+
+/** Offset 0x069C - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[24];
+
+/** Offset 0x06B4 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
+ PchPcieAspmAutoConfig.
+**/
+ UINT8 PcieRpAspm[24];
+
+/** Offset 0x06CC - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
+ Default is PchPcieL1SubstatesL1_1_2.
+**/
+ UINT8 PcieRpL1Substates[24];
+
+/** Offset 0x06E4 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 PcieRpLtrEnable[24];
+
+/** Offset 0x06FC - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PcieRpLtrConfigLock[24];
+
+/** Offset 0x0714 - Reserved
+**/
+ UINT8 Reserved29[44];
+
+/** Offset 0x0740 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite;
+
+/** Offset 0x0741 - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x0742 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x0743 - Reserved
+**/
+ UINT8 Reserved30[2];
+
+/** Offset 0x0745 - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x0746 - PCIE IMR
+ Enables Isolated Memory Region for PCIe.
+ $EN_DIS
+**/
+ UINT8 PcieRpImrEnabled;
+
+/** Offset 0x0747 - PCIE IMR port number
+ Selects PCIE root port number for IMR feature.
+**/
+ UINT8 PcieRpImrSelection;
+
+/** Offset 0x0748 - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x0749 - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
+
+/** Offset 0x074A - PCH Pm WoW lan Enable
+ Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanEnable;
+
+/** Offset 0x074B - PCH Pm WoW lan DeepSx Enable
+ Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
+ PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanDeepSxEnable;
+
+/** Offset 0x074C - PCH Pm Lan Wake From DeepSx
+ Determine if enable LAN to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmLanWakeFromDeepSx;
+
+/** Offset 0x074D - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x074E - PCH Pm Slp S3 Min Assert
SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
**/
UINT8 PchPmSlpS3MinAssert;
-/** Offset 0x073F - Reserved
+/** Offset 0x074F - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
**/
- UINT8 Reserved21;
+ UINT8 PchPmSlpS4MinAssert;
-/** Offset 0x0740 - PCH Pm Slp Sus Min Assert
+/** Offset 0x0750 - PCH Pm Slp Sus Min Assert
SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
**/
UINT8 PchPmSlpSusMinAssert;
-/** Offset 0x0741 - PCH Pm Slp A Min Assert
+/** Offset 0x0751 - PCH Pm Slp A Min Assert
SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
**/
UINT8 PchPmSlpAMinAssert;
-/** Offset 0x0742 - Reserved
+/** Offset 0x0752 - USB Overcurrent Override for DbC
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when DbC is used to avoid signaling conflicts.
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x0753 - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x0754 - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x0755 - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x0756 - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x0757 - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x0758 - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x0759 - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x075A - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
+**/
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x075B - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
**/
- UINT8 Reserved22[11];
+ UINT8 PchPmPciePllSsc;
-/** Offset 0x074D - PCH Sata Pwr Opt Enable
+/** Offset 0x075C - PCH Legacy IO Low Latency Enable
+ Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable
+ $EN_DIS
+**/
+ UINT8 PchLegacyIoLowLatency;
+
+/** Offset 0x075D - PCH Sata Pwr Opt Enable
SATA Power Optimizer on PCH side.
$EN_DIS
**/
UINT8 SataPwrOptEnable;
-/** Offset 0x074E - Reserved
+/** Offset 0x075E - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x075F - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x0760 - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x0768 - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x0770 - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x0778 - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x0780 - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
+**/
+ UINT8 SataPortsSolidStateDrive[8];
+
+/** Offset 0x0788 - Enable SATA Port Enable Dito Config
+ Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
+**/
+ UINT8 SataPortsEnableDitoConfig[8];
+
+/** Offset 0x0790 - Enable SATA Port DmVal
+ DITO multiplier. Default is 15.
+**/
+ UINT8 SataPortsDmVal[8];
+
+/** Offset 0x0798 - Enable SATA Port DmVal
+ DEVSLP Idle Timeout (DITO), Default is 625.
+**/
+ UINT16 SataPortsDitoVal[8];
+
+/** Offset 0x07A8 - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x07B0 - PCH Sata Rst Raid Alternate Id
+ Enable RAID Alternate ID.
+ $EN_DIS
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x07B1 - PCH Sata Rst Raid0
+ RAID0.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid0;
+
+/** Offset 0x07B2 - PCH Sata Rst Raid1
+ RAID1.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid1;
+
+/** Offset 0x07B3 - PCH Sata Rst Raid10
+ RAID10.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid10;
+
+/** Offset 0x07B4 - PCH Sata Rst Raid5
+ RAID5.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid5;
+
+/** Offset 0x07B5 - PCH Sata Rst Irrt
+ Intel Rapid Recovery Technology.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrt;
+
+/** Offset 0x07B6 - PCH Sata Rst Orom Ui Banner
+ OROM UI and BANNER.
+ $EN_DIS
+**/
+ UINT8 SataRstOromUiBanner;
+
+/** Offset 0x07B7 - PCH Sata Rst Orom Ui Delay
+ 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
+**/
+ UINT8 SataRstOromUiDelay;
+
+/** Offset 0x07B8 - PCH Sata Rst Hdd Unlock
+ Indicates that the HDD password unlock in the OS is enabled.
+ $EN_DIS
+**/
+ UINT8 SataRstHddUnlock;
+
+/** Offset 0x07B9 - PCH Sata Rst Led Locate
+ Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
+ enabled on the OS.
+ $EN_DIS
+**/
+ UINT8 SataRstLedLocate;
+
+/** Offset 0x07BA - PCH Sata Rst Irrt Only
+ Allow only IRRT drives to span internal and external ports.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrtOnly;
+
+/** Offset 0x07BB - PCH Sata Rst Smart Storage
+ RST Smart Storage caching Bit.
+ $EN_DIS
+**/
+ UINT8 SataRstSmartStorage;
+
+/** Offset 0x07BC - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x07BF - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
**/
- UINT8 Reserved23[146];
+ UINT8 SataRstPcieStoragePort[3];
-/** Offset 0x07E0 - USB2 Port Over Current Pin
+/** Offset 0x07C2 - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x07C5 - UFS enable/disable
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+ $EN_DIS
+**/
+ UINT8 UfsEnable[2];
+
+/** Offset 0x07C7 - Reserved
+**/
+ UINT8 Reserved31;
+
+/** Offset 0x07C8 - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x07CA - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x07CC - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x07CE - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x07CF - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x07D0 - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x07D1 - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x07D2 - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x07D3 - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x07D4 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x07D5 - Thermal Sensor 0 Target Width
+ Thermal Sensor 0 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x07D6 - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x07D7 - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x07D8 - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x07D9 - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x07DA - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x07DB - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x07DC - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x07DD - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x07DE - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x07DF - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x07E0 - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x07E1 - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x07E2 - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x07E3 - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x07E4 - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x07E5 - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x07E6 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x07E7 - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x07E9 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x07EB - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x07ED - Reserved
+**/
+ UINT8 Reserved32;
+
+/** Offset 0x07EE - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
+
+/** Offset 0x07F0 - USB2 Port Over Current Pin
Describe the specific over current pin number of USB 2.0 Port N.
**/
UINT8 Usb2OverCurrentPin[16];
-/** Offset 0x07F0 - USB3 Port Over Current Pin
+/** Offset 0x0800 - USB3 Port Over Current Pin
Describe the specific over current pin number of USB 3.0 Port N.
**/
UINT8 Usb3OverCurrentPin[10];
-/** Offset 0x07FA - Enable 8254 Static Clock Gating
+/** Offset 0x080A - Enable 8254 Static Clock Gating
Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
legacy OS using 8254 timer. Also enable this while S0ix is enabled.
@@ -619,7 +1839,7 @@ typedef struct {
**/
UINT8 Enable8254ClockGating;
-/** Offset 0x07FB - Enable 8254 Static Clock Gating On S3
+/** Offset 0x080B - Enable 8254 Static Clock Gating On S3
This is only applicable when Enable8254ClockGating is disabled. FSP will do the
8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
avoids the SMI requirement for the programming.
@@ -627,21 +1847,330 @@ typedef struct {
**/
UINT8 Enable8254ClockGatingOnS3;
-/** Offset 0x07FC - Reserved
+/** Offset 0x080C - PCH Sata Rst Optane Memory
+ Optane Memory
+ $EN_DIS
+**/
+ UINT8 SataRstOptaneMemory;
+
+/** Offset 0x080D - PCH Sata Rst CPU Attached Storage
+ CPU Attached Storage
+ $EN_DIS
+**/
+ UINT8 SataRstCpuAttachedStorage;
+
+/** Offset 0x080E - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
+
+/** Offset 0x080F - Reserved
+**/
+ UINT8 Reserved33;
+
+/** Offset 0x0810 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0830 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x0834 - Reserved
+**/
+ UINT8 Reserved34[4];
+
+/** Offset 0x0838 - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x0840 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x0848 - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x0849 - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x084A - Reserved
+**/
+ UINT8 Reserved35[6];
+
+/** Offset 0x0850 - SVID SDID table Poniter.
+ The address of the table of SVID SDID to customize each SVID SDID entry. This is
+ only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x0854 - Number of ssid table.
+ SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr.
+ This is only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiNumberOfSsidTableEntry;
+
+/** Offset 0x0856 - Reserved
+**/
+ UINT8 Reserved36[16];
+
+/** Offset 0x0866 - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x0867 - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x0868 - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
+**/
+ UINT8 PsOnEnable;
+
+/** Offset 0x0869 - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x086A - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
**/
- UINT8 Reserved24[487];
+ UINT8 PchDmiAspmCtrl;
-/** Offset 0x09E3 - Enable/Disable IGFX PmSupport
+/** Offset 0x086B - PchDmiCwbEnable
+ Central Write Buffer feature configurable and disabled by default
+ $EN_DIS
+**/
+ UINT8 PchDmiCwbEnable;
+
+/** Offset 0x086C - OS IDLE Mode Enable
+ Enable/Disable OS Idle Mode
+ $EN_DIS
+**/
+ UINT8 PmcOsIdleEnable;
+
+/** Offset 0x086D - Reserved
+**/
+ UINT8 Reserved37[307];
+
+/** Offset 0x09A0 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTranEnable[10];
+
+/** Offset 0x09AA - USB 3.0 TX Output Unique Transition Bit Scale for rate 3
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default
+ = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTran[10];
+
+/** Offset 0x09B4 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate2UniqTranEnable[10];
+
+/** Offset 0x09BE - USB 3.0 TX Output Unique Transition Bit Scale for rate 2
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate2UniqTran[10];
+
+/** Offset 0x09C8 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTranEnable[10];
+
+/** Offset 0x09D2 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTran[10];
+
+/** Offset 0x09DC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTranEnable[10];
+
+/** Offset 0x09E6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTran[10];
+
+/** Offset 0x09F0 - Skip PAM regsiter lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x09F1 - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x09F2 - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x09F3 - Enable/Disable IGFX PmSupport
Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
$EN_DIS
**/
UINT8 PmSupport;
-/** Offset 0x09E4 - Reserved
+/** Offset 0x09F4 - Enable/Disable CdynmaxClamp
+ Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
+
+/** Offset 0x09F5 - GT Frequency Limit
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+**/
+ UINT8 GtFreqMax;
+
+/** Offset 0x09F6 - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
+**/
+ UINT8 DisableTurboGt;
+
+/** Offset 0x09F7 - Enable/Disable CdClock Init
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock if not initialized by Gfx PEIM
+ $EN_DIS
+**/
+ UINT8 SkipCdClockInit;
+
+/** Offset 0x09F8 - Reserved
+**/
+ UINT8 Reserved38[15];
+
+/** Offset 0x0A07 - 1-Core Ratio Limit
+ 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal
+ to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83
+**/
+ UINT8 OneCoreRatioLimit;
+
+/** Offset 0x0A08 - 2-Core Ratio Limit
+ 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 TwoCoreRatioLimit;
+
+/** Offset 0x0A09 - 3-Core Ratio Limit
+ 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 ThreeCoreRatioLimit;
+
+/** Offset 0x0A0A - 4-Core Ratio Limit
+ 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 FourCoreRatioLimit;
+
+/** Offset 0x0A0B - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x0A0C - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x0A0D - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
+ 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x0A0E - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x0A0F - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x0A10 - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x0A11 - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x0A12 - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
**/
- UINT8 Reserved25[32];
+ UINT8 PowerLimit3Lock;
-/** Offset 0x0A04 - TCC Activation Offset
+/** Offset 0x0A13 - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
+
+/** Offset 0x0A14 - TCC Activation Offset
TCC Activation Offset. Offset from factory set TCC activation temperature at which
the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
@@ -649,62 +2178,713 @@ typedef struct {
**/
UINT8 TccActivationOffset;
-/** Offset 0x0A05 - Reserved
+/** Offset 0x0A15 - Tcc Offset Clamp Enable/Disable
+ Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
+ below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
+ For all other SKUs the recommended default are <b>0: Disabled</b>.
+ $EN_DIS
+**/
+ UINT8 TccOffsetClamp;
+
+/** Offset 0x0A16 - Tcc Offset Lock
+ Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
+ target; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 TccOffsetLock;
+
+/** Offset 0x0A17 - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x0A18 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x0A19 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x0A1A - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom1ConfigTdpControl;
+
+/** Offset 0x0A1B - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x0A1C - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x0A1D - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom2ConfigTdpControl;
+
+/** Offset 0x0A1E - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x0A1F - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x0A20 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom3ConfigTdpControl;
+
+/** Offset 0x0A21 - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x0A22 - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x0A23 - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x0A24 - PL1 timewindow
+ PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
+ , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x0A25 - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x0A26 - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x0A27 - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x0A28 - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x0A29 - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x0A2A - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x0A2B - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x0A2C - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x0A2D - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x0A2E - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x0A2F - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
**/
- UINT8 Reserved26[34];
+ UINT8 EnergyEfficientTurbo;
-/** Offset 0x0A27 - Enable or Disable CPU power states (C-states)
+/** Offset 0x0A30 - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0A31 - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0A32 - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0A33 - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0A34 - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0A35 - Reserved
+**/
+ UINT8 Reserved39;
+
+/** Offset 0x0A36 - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x0A37 - Enable or Disable CPU power states (C-states)
Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
$EN_DIS
**/
UINT8 Cx;
-/** Offset 0x0A28 - Reserved
+/** Offset 0x0A38 - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x0A39 - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
**/
- UINT8 Reserved27[74];
+ UINT8 C1e;
-/** Offset 0x0A72 - Platform Power Pmax
+/** Offset 0x0A3A - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x0A3B - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x0A3C - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x0A3D - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x0A3E - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0A3F - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0A40 - TimeUnit for C-State Latency Control0
+ TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl0TimeUnit;
+
+/** Offset 0x0A41 - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0A42 - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0A43 - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0A44 - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
+
+/** Offset 0x0A45 - TimeUnit for C-State Latency Control5
+ TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl5TimeUnit;
+
+/** Offset 0x0A46 - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7:
+ No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x0A47 - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x0A48 - Configuration for boot TDP selection
+ Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
+ Up;0xFF : Deactivate
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x0A49 - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x0A4A - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x0A72 - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0A82 - Platform Power Pmax
PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
Range 0-1024 Watts. Value of 800 = 100W
**/
UINT16 PsysPmax;
-/** Offset 0x0A74 - Reserved
+/** Offset 0x0A84 - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x0A86 - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x0A88 - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0A8A - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0A8C - Interrupt Response Time Limit of C-State LatencyContol5
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0A8E - Reserved
+**/
+ UINT8 Reserved40[2];
+
+/** Offset 0x0A90 - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit1;
+
+/** Offset 0x0A94 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x0A98 - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x0A9C - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
**/
- UINT8 Reserved28[115];
+ UINT32 PowerLimit4;
-/** Offset 0x0AE7 - End of Post message
+/** Offset 0x0AA0 - Tcc Offset Time Window for RATL
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 TccOffsetTimeWindowForRatl;
+
+/** Offset 0x0AA4 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x0AA8 - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x0AAC - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0AB0 - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0AB4 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x0AB8 - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x0ABC - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0AC0 - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x0AC4 - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x0AC5 - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x0AC6 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x0AC7 - 5-Core Ratio Limit
+ 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 FiveCoreRatioLimit;
+
+/** Offset 0x0AC8 - 6-Core Ratio Limit
+ 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SixCoreRatioLimit;
+
+/** Offset 0x0AC9 - 7-Core Ratio Limit
+ 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SevenCoreRatioLimit;
+
+/** Offset 0x0ACA - 8-Core Ratio Limit
+ 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 EightCoreRatioLimit;
+
+/** Offset 0x0ACB - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x0ACC - Intel Turbo Boost Max Technology 3.0 Driver
+ Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 EnableItbmDriver;
+
+/** Offset 0x0ACD - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x0ACE - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x0ACF - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x0AD0 - Maximum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x0AD1 - Enable or Disable Per Core P State OS control
+ Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnablePerCorePState;
+
+/** Offset 0x0AD2 - Enable or Disable HwP Autonomous Per Core P State OS control
+ Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1:
+ Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoPerCorePstate;
+
+/** Offset 0x0AD3 - Enable or Disable HwP Autonomous EPP Grouping
+ Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoEppGrouping;
+
+/** Offset 0x0AD4 - Enable or Disable EPB override over PECI
+ Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 EnableEpbPeciOverride;
+
+/** Offset 0x0AD5 - Enable or Disable Fast MSR for IA32_HWP_REQUEST
+ Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableFastMsrHwpReq;
+
+/** Offset 0x0AD6 - Reserved
+**/
+ UINT8 Reserved41[33];
+
+/** Offset 0x0AF7 - End of Post message
Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
**/
UINT8 EndOfPostMessage;
-/** Offset 0x0AE8 - Reserved
+/** Offset 0x0AF8 - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
**/
- UINT8 Reserved29;
+ UINT8 DisableD0I3SettingForHeci;
-/** Offset 0x0AE9 - Enable LOCKDOWN SMI
+/** Offset 0x0AF9 - Enable LOCKDOWN SMI
Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
$EN_DIS
**/
UINT8 PchLockDownGlobalSmi;
-/** Offset 0x0AEA - Enable LOCKDOWN BIOS Interface
+/** Offset 0x0AFA - Enable LOCKDOWN BIOS Interface
Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
$EN_DIS
**/
UINT8 PchLockDownBiosInterface;
-/** Offset 0x0AEB - Unlock all GPIO pads
+/** Offset 0x0AFB - Unlock all GPIO pads
Force all GPIO pads to be unlocked for debug purpose.
$EN_DIS
**/
UINT8 PchUnlockGpioPads;
-/** Offset 0x0AEC - Reserved
+/** Offset 0x0AFC - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
+**/
+ UINT8 PchSbAccessUnlock;
+
+/** Offset 0x0AFD - Reserved
+**/
+ UINT8 Reserved42;
+
+/** Offset 0x0AFE - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxSnoopLatency[24];
+
+/** Offset 0x0B2E - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxNoSnoopLatency[24];
+
+/** Offset 0x0B5E - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0B76 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0B8E - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0BBE - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0BD6 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0BEE - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0C1E - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[24];
+
+/** Offset 0x0C36 - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[24];
+
+/** Offset 0x0C66 - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x0C67 - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x0C68 - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x0C69 - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x0C6A - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
+
+/** Offset 0x0C6B - Reserved
+**/
+ UINT8 Reserved43;
+
+/** Offset 0x0C6C - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x0C6D - Reserved
**/
- UINT8 Reserved30[452];
+ UINT8 Reserved44[83];
} FSP_S_CONFIG;
/** Fsp S UPD Configuration
@@ -719,11 +2899,11 @@ typedef struct {
**/
FSP_S_CONFIG FspsConfig;
-/** Offset 0x0CB0
+/** Offset 0x0CC0
**/
UINT8 UnusedUpdSpace36[6];
-/** Offset 0x0CB6
+/** Offset 0x0CC6
**/
UINT16 UpdTerminator;
} FSPS_UPD;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 20:07:27 +0000