summaryrefslogtreecommitdiff
path: root/src/vendorcode/intel/fsp
diff options
context:
space:
mode:
authorLijian Zhao <lijian.zhao@intel.com>2018-01-21 22:37:21 -0800
committerSubrata Banik <subrata.banik@intel.com>2018-01-31 05:56:54 +0000
commite2a7bf16f02de88d555c7f97189e32c45b9ae1b2 (patch)
tree34f347966ffcb2c9a1947c9aa1d45be5a83efff3 /src/vendorcode/intel/fsp
parentb2e1109f0f8dffb708041248845892e2c864a852 (diff)
downloadcoreboot-e2a7bf16f02de88d555c7f97189e32c45b9ae1b2.tar.xz
intel/fsp: Update cannonlake fsp header
Update Cannonlake FSP header to revision 7.x.20.52. Following changes had been made: 1. Hide internal EV related options. 2. Add GT voltage override options. 3. Add PEG IMR selection. 4. Add PCH DMI ASPM options. TEST=NONE Change-Id: If186a1eb440266f1eaeb03505fe0ff4c6a521be6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Diffstat (limited to 'src/vendorcode/intel/fsp')
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h2
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h414
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h166
3 files changed, 388 insertions, 194 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h
index 364afedd14..feb2022204 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h
index 876c9d264c..d504f96db7 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -282,9 +282,10 @@ typedef struct {
UINT8 UnusedUpdSpace1;
/** Offset 0x00BE - DDR Frequency Limit
- Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
- 2133, 2400, 2667, 2933 and 0 for Auto.
- 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+ Maximum Memory Frequency Selections in Mhz. Valid values should match the refclk,
+ i.e. divide by 133 or 100
+ 1067:1067, 1333:1333, 1400:1400, 1600:1600, 1800:1800, 1867:1867, 2000:2000, 2133:2133,
+ 2200:2200, 2400:2400, 2600:2600, 2667:2667, 2800:2800, 2933:2933, 3000:3000, 3200:3200, 0:Auto
**/
UINT16 DdrFreqLimit;
@@ -326,25 +327,9 @@ typedef struct {
**/
UINT8 ScramblerSupport;
-/** Offset 0x00C8 - EV Loader Test Content Pointer
- Pointer to EV Loader Test Content in Memory
-**/
- UINT32 EvTestContentPtr;
-
-/** Offset 0x00CC - EV Loader Test Content Size
- Size of EV Loader Test Content in Memory
+/** Offset 0x00C8
**/
- UINT32 EvTestContentSize;
-
-/** Offset 0x00D0 - EV Loader Test Config Pointer
- Pointer to EV Loader Test Config in Memory
-**/
- UINT32 EvTestConfigPtr;
-
-/** Offset 0x00D4 - EV Loader Test Config Size
- Size of EV Loader Test Config in Memory
-**/
- UINT32 EvTestConfigSize;
+ UINT8 UnusedUpdSpace2[16];
/** Offset 0x00D8 - SPD Profile Selected
Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP
@@ -491,7 +476,7 @@ typedef struct {
/** Offset 0x00F6
**/
- UINT8 UnusedUpdSpace2[6];
+ UINT8 UnusedUpdSpace3[6];
/** Offset 0x00FC - Enable Intel HD Audio (Azalia)
0: Disable, 1: Enable (Default) Azalia controller
@@ -513,7 +498,7 @@ typedef struct {
/** Offset 0x00FF
**/
- UINT8 UnusedUpdSpace3;
+ UINT8 UnusedUpdSpace4;
/** Offset 0x0100 - HECI1 BAR address
BAR address of HECI1
@@ -684,7 +669,7 @@ typedef struct {
/** Offset 0x0125
**/
- UINT8 UnusedUpdSpace4[3];
+ UINT8 UnusedUpdSpace5[3];
/** Offset 0x0128 - DMI Gen3 Root port preset values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
@@ -708,7 +693,7 @@ typedef struct {
/** Offset 0x0144
**/
- UINT8 UnusedUpdSpace5[4];
+ UINT8 UnusedUpdSpace6[4];
/** Offset 0x0148 - PEG Gen3 RxCTLEp per-Bundle control
Range: 0-15, 12 is default for each bundle, must be specified based upon platform design
@@ -867,11 +852,37 @@ typedef struct {
**/
UINT8 GtPsmiSupport;
-/** Offset 0x01F4 - SaPreMemProductionRsvd
+/** Offset 0x01F4 - GT unslice Voltage Mode
+ 0(Default): Adaptive, 1: Override
+ 0: Adaptive, 1: Override
+**/
+ UINT8 GtusVoltageMode;
+
+/** Offset 0x01F5 - voltage offset applied to GT unslice
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtusVoltageOffset;
+
+/** Offset 0x01F7 - GT unslice voltage override which is applied to the entire range of GT frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtusVoltageOverride;
+
+/** Offset 0x01F9 - adaptive voltage applied during turbo frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtusExtraTurboVoltage;
+
+/** Offset 0x01FB - Maximum GTus turbo ratio override
+ 0(Default)=Minimal, 60=Maximum
+**/
+ UINT8 GtusMaxOcRatio;
+
+/** Offset 0x01FC - SaPreMemProductionRsvd
Reserved for SA Pre-Mem Production
$EN_DIS
**/
- UINT8 SaPreMemProductionRsvd[12];
+ UINT8 SaPreMemProductionRsvd[4];
/** Offset 0x0200 - BIST on Reset
Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
@@ -919,7 +930,7 @@ typedef struct {
/** Offset 0x0207
**/
- UINT8 UnusedUpdSpace6;
+ UINT8 UnusedUpdSpace7;
/** Offset 0x0208 - Maximum clr turbo ratio override
Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
@@ -1016,7 +1027,7 @@ typedef struct {
/** Offset 0x021A - Ring Downbin
Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
- lower than the core ratio.<b>0: Disable</b>; 1: Enable.
+ lower than the core ratio.0: Disable; <b>1: Enable.</b>
$EN_DIS
**/
UINT8 RingDownBin;
@@ -1074,7 +1085,7 @@ typedef struct {
/** Offset 0x0227
**/
- UINT8 UnusedUpdSpace7;
+ UINT8 UnusedUpdSpace8;
/** Offset 0x0228 - PrmrrSize
0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000
@@ -1669,12 +1680,12 @@ typedef struct {
UINT8 EnableOltm;
/** Offset 0x04A2 - DDR PowerDown and idle counter
- Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ Enables/Disable DDR PowerDown and idle counter
$EN_DIS
**/
UINT8 EnablePwrDn;
-/** Offset 0x04A3 - DDR PowerDown and idle counter
+/** Offset 0x04A3 - DDR PowerDown and idle counter - LPDDR
Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
$EN_DIS
**/
@@ -1711,7 +1722,7 @@ typedef struct {
**/
UINT8 SrefCfgEna;
-/** Offset 0x04A9 - Throttler CKEMin Defeature
+/** Offset 0x04A9 - Throttler CKEMin Defeature - LPDDR
Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
$EN_DIS
**/
@@ -1741,431 +1752,415 @@ typedef struct {
**/
UINT8 DdrThermalSensor;
-/** Offset 0x04AE - EV Loader
- Enable/Disable EV Loader Functionality
- $EN_DIS
-**/
- UINT8 EvLoader;
-
-/** Offset 0x04AF - EV Loader Delay
- Enable/Disable EV Loader 2 Second Delay
- $EN_DIS
-**/
- UINT8 EvLoaderDelay;
-
-/** Offset 0x04B0 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+/** Offset 0x04AE - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
$EN_DIS
**/
UINT8 Ddr4DdpSharedClock;
-/** Offset 0x04B1 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+/** Offset 0x04AF - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
$EN_DIS
**/
UINT8 Ddr4DdpSharedZq;
-/** Offset 0x04B2 - Ch Hash Mask
+/** Offset 0x04B0 - Ch Hash Mask
Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
BITS [19:6
**/
UINT16 ChHashMask;
-/** Offset 0x04B4 - Base reference clock value
+/** Offset 0x04B2 - Base reference clock value
Base reference clock value, in Hertz(Default is 125Hz)
100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
**/
UINT32 BClkFrequency;
-/** Offset 0x04B8 - Ch Hash Interleaved Bit
+/** Offset 0x04B6 - Ch Hash Interleaved Bit
Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
**/
UINT8 ChHashInterleaveBit;
-/** Offset 0x04B9 - Energy Scale Factor
+/** Offset 0x04B7 - Energy Scale Factor
Energy Scale Factor, Default is 4
**/
UINT8 EnergyScaleFact;
-/** Offset 0x04BA - EPG DIMM Idd3N
+/** Offset 0x04B8 - EPG DIMM Idd3N
Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
a per DIMM basis. Default is 26
**/
UINT16 Idd3n;
-/** Offset 0x04BC - EPG DIMM Idd3P
+/** Offset 0x04BA - EPG DIMM Idd3P
Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
on a per DIMM basis. Default is 11
**/
UINT16 Idd3p;
-/** Offset 0x04BE - CMD Slew Rate Training
+/** Offset 0x04BC - CMD Slew Rate Training
Enable/Disable CMD Slew Rate Training
$EN_DIS
**/
UINT8 CMDSR;
-/** Offset 0x04BF - CMD Drive Strength and Tx Equalization
+/** Offset 0x04BD - CMD Drive Strength and Tx Equalization
Enable/Disable CMD Drive Strength and Tx Equalization
$EN_DIS
**/
UINT8 CMDDSEQ;
-/** Offset 0x04C0 - CMD Normalization
+/** Offset 0x04BE - CMD Normalization
Enable/Disable CMD Normalization
$EN_DIS
**/
UINT8 CMDNORM;
-/** Offset 0x04C1 - Early DQ Write Drive Strength and Equalization Training
+/** Offset 0x04BF - Early DQ Write Drive Strength and Equalization Training
Enable/Disable Early DQ Write Drive Strength and Equalization Training
$EN_DIS
**/
UINT8 EWRDSEQ;
-/** Offset 0x04C2 - RH Activation Probability
+/** Offset 0x04C0 - RH Activation Probability
RH Activation Probability, Probability value is 1/2^(inputvalue)
**/
UINT8 RhActProbability;
-/** Offset 0x04C3 - RAPL PL 2 WindowX
+/** Offset 0x04C1 - RAPL PL 2 WindowX
Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
**/
UINT8 RaplLim2WindX;
-/** Offset 0x04C4 - RAPL PL 2 WindowY
+/** Offset 0x04C2 - RAPL PL 2 WindowY
Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
**/
UINT8 RaplLim2WindY;
-/** Offset 0x04C5 - RAPL PL 1 WindowX
+/** Offset 0x04C3 - RAPL PL 1 WindowX
Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
**/
UINT8 RaplLim1WindX;
-/** Offset 0x04C6 - RAPL PL 1 WindowY
+/** Offset 0x04C4 - RAPL PL 1 WindowY
Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
**/
UINT8 RaplLim1WindY;
-/** Offset 0x04C7
-**/
- UINT8 UnusedUpdSpace8;
-
-/** Offset 0x04C8 - RAPL PL 2 Power
+/** Offset 0x04C5 - RAPL PL 2 Power
range[0;2^14-1]= [2047.875;0]in W, (224= Def)
**/
UINT16 RaplLim2Pwr;
-/** Offset 0x04CA - RAPL PL 1 Power
+/** Offset 0x04C7 - RAPL PL 1 Power
range[0;2^14-1]= [2047.875;0]in W, (224= Def)
**/
UINT16 RaplLim1Pwr;
-/** Offset 0x04CC - Warm Threshold Ch0 Dimm0
+/** Offset 0x04C9 - Warm Threshold Ch0 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 WarmThresholdCh0Dimm0;
-/** Offset 0x04CD - Warm Threshold Ch0 Dimm1
+/** Offset 0x04CA - Warm Threshold Ch0 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 WarmThresholdCh0Dimm1;
-/** Offset 0x04CE - Warm Threshold Ch1 Dimm0
+/** Offset 0x04CB - Warm Threshold Ch1 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 WarmThresholdCh1Dimm0;
-/** Offset 0x04CF - Warm Threshold Ch1 Dimm1
+/** Offset 0x04CC - Warm Threshold Ch1 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 WarmThresholdCh1Dimm1;
-/** Offset 0x04D0 - Hot Threshold Ch0 Dimm0
+/** Offset 0x04CD - Hot Threshold Ch0 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 HotThresholdCh0Dimm0;
-/** Offset 0x04D1 - Hot Threshold Ch0 Dimm1
+/** Offset 0x04CE - Hot Threshold Ch0 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 HotThresholdCh0Dimm1;
-/** Offset 0x04D2 - Hot Threshold Ch1 Dimm0
+/** Offset 0x04CF - Hot Threshold Ch1 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 HotThresholdCh1Dimm0;
-/** Offset 0x04D3 - Hot Threshold Ch1 Dimm1
+/** Offset 0x04D0 - Hot Threshold Ch1 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
**/
UINT8 HotThresholdCh1Dimm1;
-/** Offset 0x04D4 - Warm Budget Ch0 Dimm0
+/** Offset 0x04D1 - Warm Budget Ch0 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 WarmBudgetCh0Dimm0;
-/** Offset 0x04D5 - Warm Budget Ch0 Dimm1
+/** Offset 0x04D2 - Warm Budget Ch0 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 WarmBudgetCh0Dimm1;
-/** Offset 0x04D6 - Warm Budget Ch1 Dimm0
+/** Offset 0x04D3 - Warm Budget Ch1 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 WarmBudgetCh1Dimm0;
-/** Offset 0x04D7 - Warm Budget Ch1 Dimm1
+/** Offset 0x04D4 - Warm Budget Ch1 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 WarmBudgetCh1Dimm1;
-/** Offset 0x04D8 - Hot Budget Ch0 Dimm0
+/** Offset 0x04D5 - Hot Budget Ch0 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 HotBudgetCh0Dimm0;
-/** Offset 0x04D9 - Hot Budget Ch0 Dimm1
+/** Offset 0x04D6 - Hot Budget Ch0 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 HotBudgetCh0Dimm1;
-/** Offset 0x04DA - Hot Budget Ch1 Dimm0
+/** Offset 0x04D7 - Hot Budget Ch1 Dimm0
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 HotBudgetCh1Dimm0;
-/** Offset 0x04DB - Hot Budget Ch1 Dimm1
+/** Offset 0x04D8 - Hot Budget Ch1 Dimm1
range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
**/
UINT8 HotBudgetCh1Dimm1;
-/** Offset 0x04DC - Idle Energy Ch0Dimm0
+/** Offset 0x04D9 - Idle Energy Ch0Dimm0
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyCh0Dimm0;
-/** Offset 0x04DD - Idle Energy Ch0Dimm1
+/** Offset 0x04DA - Idle Energy Ch0Dimm1
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyCh0Dimm1;
-/** Offset 0x04DE - Idle Energy Ch1Dimm0
+/** Offset 0x04DB - Idle Energy Ch1Dimm0
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyCh1Dimm0;
-/** Offset 0x04DF - Idle Energy Ch1Dimm1
+/** Offset 0x04DC - Idle Energy Ch1Dimm1
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyCh1Dimm1;
-/** Offset 0x04E0 - PowerDown Energy Ch0Dimm0
+/** Offset 0x04DD - PowerDown Energy Ch0Dimm0
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
**/
UINT8 PdEnergyCh0Dimm0;
-/** Offset 0x04E1 - PowerDown Energy Ch0Dimm1
+/** Offset 0x04DE - PowerDown Energy Ch0Dimm1
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
**/
UINT8 PdEnergyCh0Dimm1;
-/** Offset 0x04E2 - PowerDown Energy Ch1Dimm0
+/** Offset 0x04DF - PowerDown Energy Ch1Dimm0
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
**/
UINT8 PdEnergyCh1Dimm0;
-/** Offset 0x04E3 - PowerDown Energy Ch1Dimm1
+/** Offset 0x04E0 - PowerDown Energy Ch1Dimm1
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
**/
UINT8 PdEnergyCh1Dimm1;
-/** Offset 0x04E4 - Activate Energy Ch0Dimm0
+/** Offset 0x04E1 - Activate Energy Ch0Dimm0
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyCh0Dimm0;
-/** Offset 0x04E5 - Activate Energy Ch0Dimm1
+/** Offset 0x04E2 - Activate Energy Ch0Dimm1
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyCh0Dimm1;
-/** Offset 0x04E6 - Activate Energy Ch1Dimm0
+/** Offset 0x04E3 - Activate Energy Ch1Dimm0
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyCh1Dimm0;
-/** Offset 0x04E7 - Activate Energy Ch1Dimm1
+/** Offset 0x04E4 - Activate Energy Ch1Dimm1
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyCh1Dimm1;
-/** Offset 0x04E8 - Read Energy Ch0Dimm0
+/** Offset 0x04E5 - Read Energy Ch0Dimm0
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyCh0Dimm0;
-/** Offset 0x04E9 - Read Energy Ch0Dimm1
+/** Offset 0x04E6 - Read Energy Ch0Dimm1
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyCh0Dimm1;
-/** Offset 0x04EA - Read Energy Ch1Dimm0
+/** Offset 0x04E7 - Read Energy Ch1Dimm0
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyCh1Dimm0;
-/** Offset 0x04EB - Read Energy Ch1Dimm1
+/** Offset 0x04E8 - Read Energy Ch1Dimm1
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyCh1Dimm1;
-/** Offset 0x04EC - Write Energy Ch0Dimm0
+/** Offset 0x04E9 - Write Energy Ch0Dimm0
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyCh0Dimm0;
-/** Offset 0x04ED - Write Energy Ch0Dimm1
+/** Offset 0x04EA - Write Energy Ch0Dimm1
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyCh0Dimm1;
-/** Offset 0x04EE - Write Energy Ch1Dimm0
+/** Offset 0x04EB - Write Energy Ch1Dimm0
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyCh1Dimm0;
-/** Offset 0x04EF - Write Energy Ch1Dimm1
+/** Offset 0x04EC - Write Energy Ch1Dimm1
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyCh1Dimm1;
-/** Offset 0x04F0 - Throttler CKEMin Timer
+/** Offset 0x04ED - Throttler CKEMin Timer
Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
Dfault is 0x30
**/
UINT8 ThrtCkeMinTmr;
-/** Offset 0x04F1 - Cke Rank Mapping
+/** Offset 0x04EE - Cke Rank Mapping
Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies
which rank CKE[i] goes to.
**/
UINT8 CkeRankMapping;
-/** Offset 0x04F2 - Rapl Power Floor Ch0
+/** Offset 0x04EF - Rapl Power Floor Ch0
Power budget ,range[255;0],(0= 5.3W Def)
**/
UINT8 RaplPwrFlCh0;
-/** Offset 0x04F3 - Rapl Power Floor Ch1
+/** Offset 0x04F0 - Rapl Power Floor Ch1
Power budget ,range[255;0],(0= 5.3W Def)
**/
UINT8 RaplPwrFlCh1;
-/** Offset 0x04F4 - Command Rate Support
+/** Offset 0x04F1 - Command Rate Support
CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
- 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS
+ 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS
**/
UINT8 EnCmdRate;
-/** Offset 0x04F5 - REFRESH_2X_MODE
+/** Offset 0x04F2 - REFRESH_2X_MODE
0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
**/
UINT8 Refresh2X;
-/** Offset 0x04F6 - Energy Performance Gain
+/** Offset 0x04F3 - Energy Performance Gain
Enable/disable(default) Energy Performance Gain.
$EN_DIS
**/
UINT8 EpgEnable;
-/** Offset 0x04F7 - Row Hammer Solution
+/** Offset 0x04F4 - Row Hammer Solution
Type of method used to prevent Row Hammer. Default is Hardware RHP
0:Hardware RHP, 1:2x Refresh
**/
UINT8 RhSolution;
-/** Offset 0x04F8 - User Manual Threshold
+/** Offset 0x04F5 - User Manual Threshold
Disabled: Predefined threshold will be used.\n
Enabled: User Input will be used.
$EN_DIS
**/
UINT8 UserThresholdEnable;
-/** Offset 0x04F9 - User Manual Budget
+/** Offset 0x04F6 - User Manual Budget
Disabled: Configuration of memories will defined the Budget value.\n
Enabled: User Input will be used.
$EN_DIS
**/
UINT8 UserBudgetEnable;
-/** Offset 0x04FA - TcritMax
+/** Offset 0x04F7 - TcritMax
Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax
has to be greater than THIGHMax .\n
Critical temperature will be TcritMax
**/
UINT8 TsodTcritMax;
-/** Offset 0x04FB - Event mode
+/** Offset 0x04F8 - Event mode
Disable:Comparator mode.\n
Enable:Interrupt mode
$EN_DIS
**/
UINT8 TsodEventMode;
-/** Offset 0x04FC - EVENT polarity
+/** Offset 0x04F9 - EVENT polarity
Disable:Active LOW.\n
Enable:Active HIGH
$EN_DIS
**/
UINT8 TsodEventPolarity;
-/** Offset 0x04FD - Critical event only
+/** Offset 0x04FA - Critical event only
Disable:Trips on alarm or critical.\n
Enable:Trips only if criticaal temperature is reached
$EN_DIS
**/
UINT8 TsodCriticalEventOnly;
-/** Offset 0x04FE - Event output control
+/** Offset 0x04FB - Event output control
Disable:Event output disable.\n
Enable:Event output enabled
$EN_DIS
**/
UINT8 TsodEventOutputControl;
-/** Offset 0x04FF - Alarm window lock bit
+/** Offset 0x04FC - Alarm window lock bit
Disable:Alarm trips are not locked and can be changed.\n
Enable:Alarm trips are locked and cannot be changed
$EN_DIS
**/
UINT8 TsodAlarmwindowLockBit;
-/** Offset 0x0500 - Critical trip lock bit
+/** Offset 0x04FD - Critical trip lock bit
Disable:Critical trip is not locked and can be changed.\n
Enable:Critical trip is locked and cannot be changed
$EN_DIS
**/
UINT8 TsodCriticaltripLockBit;
-/** Offset 0x0501 - Shutdown mode
+/** Offset 0x04FE - Shutdown mode
Disable:Temperature sensor enable.\n
Enable:Temperature sensor disable
$EN_DIS
**/
UINT8 TsodShutdownMode;
-/** Offset 0x0502 - ThighMax
+/** Offset 0x04FF - ThighMax
Thigh = ThighMax (Default is 93)
**/
UINT8 TsodThigMax;
-/** Offset 0x0503 - User Manual Thig and Tcrit
+/** Offset 0x0500 - User Manual Thig and Tcrit
Disabled(Default): Temperature will be given by the configuration of memories and
1x or 2xrefresh rate.\n
Enabled: User Input will define for Thigh and Tcrit.
@@ -2173,32 +2168,32 @@ typedef struct {
**/
UINT8 TsodManualEnable;
-/** Offset 0x0504 - Force OLTM or 2X Refresh when needed
+/** Offset 0x0501 - Force OLTM or 2X Refresh when needed
Disabled(Default): = Force OLTM.\n
Enabled: = Force 2x Refresh.
$EN_DIS
**/
UINT8 ForceOltmOrRefresh2x;
-/** Offset 0x0505 - Pwr Down Idle Timer
+/** Offset 0x0502 - Pwr Down Idle Timer
The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
AUTO: 64 for ULX/ULT, 128 for DT/Halo
**/
UINT8 PwdwnIdleCounter;
-/** Offset 0x0506 - Bitmask of ranks that have CA bus terminated
+/** Offset 0x0503 - Bitmask of ranks that have CA bus terminated
Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
Rank0 is terminating and Rank1 is non-terminating</b>
**/
UINT8 CmdRanksTerminated;
-/** Offset 0x0507 - GDXC MOT enable
+/** Offset 0x0504 - GDXC MOT enable
GDXC MOT enable.
$EN_DIS
**/
UINT8 GdxcEnable;
-/** Offset 0x0508 - PcdSerialDebugLevel
+/** Offset 0x0505 - PcdSerialDebugLevel
Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
Info & Verbose.
@@ -2207,55 +2202,71 @@ typedef struct {
**/
UINT8 PcdSerialDebugLevel;
-/** Offset 0x0509 - Fivr Faults
+/** Offset 0x0506 - Fivr Faults
Fivr Faults; 0: Disabled; <b>1: Enabled.</b>
$EN_DIS
**/
UINT8 FivrFaults;
-/** Offset 0x050A - Fivr Efficiency
+/** Offset 0x0507 - Fivr Efficiency
Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b>
$EN_DIS
**/
UINT8 FivrEfficiency;
-/** Offset 0x050B - Safe Mode Support
+/** Offset 0x0508 - Safe Mode Support
This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
$EN_DIS
**/
UINT8 SafeMode;
-/** Offset 0x050C - Ask MRC to clear memory content
+/** Offset 0x0509 - Ask MRC to clear memory content
Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
$EN_DIS
**/
UINT8 CleanMemory;
-/** Offset 0x050D - LpDdrDqDqsReTraining
+/** Offset 0x050A - LpDdrDqDqsReTraining
Enables/Disable LpDdrDqDqsReTraining
$EN_DIS
**/
UINT8 LpDdrDqDqsReTraining;
-/** Offset 0x050E - Post Code Output Port
+/** Offset 0x050B - Post Code Output Port
This option configures Post Code Output Port
**/
UINT16 PostCodeOutputPort;
-/** Offset 0x0510 - RMTLoopCount
+/** Offset 0x050D - RMTLoopCount
Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
**/
UINT8 RMTLoopCount;
-/** Offset 0x0511 - BER Support
+/** Offset 0x050E - BER Support
Enable/Disable the Rank Margin Tool interpolation/extrapolation.
0:Disable, 1:Enable
**/
UINT8 EnBER;
-/** Offset 0x0512
+/** Offset 0x050F - PEG IMR support
+ This option configures the IMR support for PEG.(def=Disable)
+ $EN_DIS
+**/
+ UINT8 PegImrEnable;
+
+/** Offset 0x0510 - PEG IMR size
+ The size of IMR to be allocated for PEG EndPoint device
**/
- UINT8 ReservedFspmUpd[14];
+ UINT16 PegImrSize;
+
+/** Offset 0x0512 - PEG Root Port Selection
+ The Root Port for which the IMR to be allocated
+**/
+ UINT8 PegImrRpSelection;
+
+/** Offset 0x0513
+**/
+ UINT8 ReservedFspmUpd[12];
} FSP_M_CONFIG;
/** Fsp M Test Configuration
@@ -2480,7 +2491,7 @@ typedef struct {
/** Offset 0x0579
**/
- UINT8 UnusedUpdSpace9;
+ UINT8 UnusedUpdSpace10;
/** Offset 0x057A - Jitter Dwell Time for PCIe Gen3 Software Equalization
Range: 0-65535, default is 1000. @warning Do not change from the default
@@ -2619,9 +2630,116 @@ typedef struct {
**/
UINT8 KtDeviceEnable;
-/** Offset 0x05A5
+/** Offset 0x05A5 - tRd2RdSG
+ Delay between Read-to-Read commands in the same Bank Group. 0-Auto, Range 4-54.
**/
- UINT8 ReservedFspmTestUpd[11];
+ UINT8 tRd2RdSG;
+
+/** Offset 0x05A6 - tRd2RdDG
+ Delay between Read-to-Read commands in different Bank Group for DDR4. All other
+ DDR technologies should set this equal to SG. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2RdDG;
+
+/** Offset 0x05A7 - tRd2RdDR
+ Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2RdDR;
+
+/** Offset 0x05A8 - tRd2RdDD
+ Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2RdDD;
+
+/** Offset 0x05A9 - tWr2RdSG
+ Delay between Write-to-Read commands in the same Bank Group. 0-Auto, Range 4-86.
+**/
+ UINT8 tWr2RdSG;
+
+/** Offset 0x05AA - tWr2RdDG
+ Delay between Write-to-Read commands in different Bank Group for DDR4. All other
+ DDR technologies should set this equal to SG. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2RdDG;
+
+/** Offset 0x05AB - tWr2RdDR
+ Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2RdDR;
+
+/** Offset 0x05AC - tWr2RdDD
+ Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2RdDD;
+
+/** Offset 0x05AD - tWr2WrSG
+ Delay between Write-to-Write commands in the same Bank Group. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2WrSG;
+
+/** Offset 0x05AE - tWr2WrDG
+ Delay between Write-to-Write commands in different Bank Group for DDR4. All other
+ DDR technologies should set this equal to SG. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2WrDG;
+
+/** Offset 0x05AF - tWr2WrDR
+ Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2WrDR;
+
+/** Offset 0x05B0 - tWr2WrDD
+ Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54.
+**/
+ UINT8 tWr2WrDD;
+
+/** Offset 0x05B1 - tRd2WrSG
+ Delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2WrSG;
+
+/** Offset 0x05B2 - tRd2WrDG
+ Delay between Read-to-Write commands in different Bank Group for DDR4. All other
+ DDR technologies should set this equal to SG. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2WrDG;
+
+/** Offset 0x05B3 - tRd2WrDR
+ Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2WrDR;
+
+/** Offset 0x05B4 - tRd2WrDD
+ Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54.
+**/
+ UINT8 tRd2WrDD;
+
+/** Offset 0x05B5 - tRRD_L
+ Min Row Active to Row Active Delay Time for Same Bank Group, DDR4 Only. 0: AUTO, max: 31
+**/
+ UINT8 tRRD_L;
+
+/** Offset 0x05B6 - tRRD_S
+ Min Row Active to Row Active Delay Time for Different Bank Group, DDR4 Only. 0:
+ AUTO, max: 31
+**/
+ UINT8 tRRD_S;
+
+/** Offset 0x05B7 - tWTR_L
+ Min Internal Write to Read Command Delay Time for Same Bank Group, DDR4 Only. 0:
+ AUTO, max: 60
+**/
+ UINT8 tWTR_L;
+
+/** Offset 0x05B8 - tWTR_S
+ Min Internal Write to Read Command Delay Time for Different Bank Group, DDR4 Only.
+ 0: AUTO, max: 28
+**/
+ UINT8 tWTR_S;
+
+/** Offset 0x05B9
+**/
+ UINT8 ReservedFspmTestUpd[3];
} FSP_M_TEST_CONFIG;
/** Fsp M UPD Configuration
@@ -2640,13 +2758,17 @@ typedef struct {
**/
FSP_M_CONFIG FspmConfig;
+/** Offset 0x051F
+**/
+ UINT8 UnusedUpdSpace9;
+
/** Offset 0x0520
**/
FSP_M_TEST_CONFIG FspmTestConfig;
-/** Offset 0x05B0
+/** Offset 0x05BC
**/
- UINT16 UpdTerminator;
+ UINT32 UpdTerminator;
} FSPM_UPD;
#pragma pack()
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h
index 17b9f92b4e..0285dd1bf7 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -470,9 +470,18 @@ typedef struct {
**/
UINT8 PchCnviMode;
-/** Offset 0x0147
+/** Offset 0x0147 - SdCard power enable polarity
+ Choose SD_PWREN# polarity
+ 0: Active low, 1: Active high
**/
- UINT8 UnusedUpdSpace3[2];
+ UINT8 SdCardPowerEnableActiveHigh;
+
+/** Offset 0x0148 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PchUsb2PhySusPgEnable;
/** Offset 0x0149 - PCH USB OverCurrent mapping enable
1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
@@ -483,7 +492,7 @@ typedef struct {
/** Offset 0x014A
**/
- UINT8 UnusedUpdSpace4;
+ UINT8 UnusedUpdSpace3;
/** Offset 0x014B - CNVi MfUart1 Type
This option configures Uart type which connects to MfUart1
@@ -506,7 +515,7 @@ typedef struct {
/** Offset 0x014E
**/
- UINT8 UnusedUpdSpace5;
+ UINT8 UnusedUpdSpace4;
/** Offset 0x014F - PCHHOT# pin
Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
@@ -594,9 +603,27 @@ typedef struct {
**/
UINT16 WatchDogTimerBios;
-/** Offset 0x015F
+/** Offset 0x015F - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx
+ $EN_DIS
**/
- UINT8 UnusedUpdSpace6[4];
+ UINT8 RemoteAssistance;
+
+/** Offset 0x0160 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x0161 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x0162
+**/
+ UINT8 UnusedUpdSpace5[1];
/** Offset 0x0163 - PCH PCIe root port connection type
0: built-in device, 1:slot
@@ -604,7 +631,8 @@ typedef struct {
UINT8 PcieRpSlotImplemented[24];
/** Offset 0x017B - Usage type for ClkSrc
- 0-23: PCH rootport, 0x40: LAN, 0x80: unspecified but in use, 0xFF: not used
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
**/
UINT8 PcieClkSrcUsage[16];
@@ -631,9 +659,22 @@ typedef struct {
**/
UINT16 PcieRpDetectTimeoutMs[24];
-/** Offset 0x01FB
+/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
**/
- UINT8 UnusedUpdSpace7[5];
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x01FC - SlpS0WithGbeSupport
+ Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SlpS0WithGbeSupport;
+
+/** Offset 0x01FD
+**/
+ UINT8 UnusedUpdSpace6[3];
/** Offset 0x0200 - Enable/Disable SA CRID
Enable: SA CRID, Disable (Default): SA CRID
@@ -642,8 +683,8 @@ typedef struct {
UINT8 CridEnable;
/** Offset 0x0201 - DMI ASPM
- 0=Disable, 3(Default)=L0sL1
- 0:Disable, 3:L0sL1
+ 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1
+ 0:Disable, 1:L0s, 2:L1, 3:L0sL1
**/
UINT8 DmiAspm;
@@ -689,7 +730,7 @@ typedef struct {
/** Offset 0x0219
**/
- UINT8 UnusedUpdSpace8;
+ UINT8 UnusedUpdSpace7;
/** Offset 0x021A - Enable or disable GNA device
0=Disable, 1(Default)=Enable
@@ -698,7 +739,7 @@ typedef struct {
UINT8 GnaEnable;
/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table
- 0=Disable/Clear, 1(Default)=Enable/Set
+ 0=Disable/Clear, 1=Enable/Set
$EN_DIS
**/
UINT8 X2ApicOptOut;
@@ -762,11 +803,36 @@ typedef struct {
**/
UINT8 DdiPortFDdc;
-/** Offset 0x0231 - SaPostMemProductionRsvd
+/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock in S3 resume due to GOP absent
+ $EN_DIS
+**/
+ UINT8 SkipS3CdClockInit;
+
+/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms
+ Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate
+ T12 Delay to max 500ms
+ 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay
+**/
+ UINT16 DeltaT12PowerCycleDelay;
+
+/** Offset 0x0234 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x0238 - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
+
+/** Offset 0x023C - SaPostMemProductionRsvd
Reserved for SA Post-Mem Production
$EN_DIS
**/
- UINT8 SaPostMemProductionRsvd[46];
+ UINT8 SaPostMemProductionRsvd[35];
/** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable
PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for
@@ -888,7 +954,7 @@ typedef struct {
/** Offset 0x02BB
**/
- UINT8 UnusedUpdSpace9[10];
+ UINT8 UnusedUpdSpace8[10];
/** Offset 0x02C5 - DcLoadline
PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
@@ -956,7 +1022,7 @@ typedef struct {
/** Offset 0x0306
**/
- UINT8 UnusedUpdSpace10[6];
+ UINT8 UnusedUpdSpace9[6];
/** Offset 0x030C - Skip Multi-Processor Initialization
When this is skipped, boot loader must initialize processors before SilicionInit
@@ -1021,18 +1087,24 @@ typedef struct {
**/
UINT8 IslVrCmd;
-/** Offset 0x031A - ReservedCpuPostMemProduction
+/** Offset 0x031A - Imon slope1 correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope1[5];
+
+/** Offset 0x0324 - ReservedCpuPostMemProduction
Reserved for CPU Post-Mem Production
$EN_DIS
**/
- UINT8 ReservedCpuPostMemProduction[17];
+ UINT8 ReservedCpuPostMemProduction[1];
-/** Offset 0x032B
+/** Offset 0x0325
**/
- UINT8 UnusedUpdSpace11[27];
+ UINT8 UnusedUpdSpace10[33];
/** Offset 0x0346 - Enable DMI ASPM
- ASPM on PCH side of the DMI Link.
+ Deprecated.
$EN_DIS
**/
UINT8 PchDmiAspm;
@@ -1072,7 +1144,7 @@ typedef struct {
/** Offset 0x0367
**/
- UINT8 UnusedUpdSpace12;
+ UINT8 UnusedUpdSpace11;
/** Offset 0x0368 - VC Type
Virtual Channel Type Select: 0: VC0, 1: VC1.
@@ -1113,7 +1185,7 @@ typedef struct {
/** Offset 0x036E
**/
- UINT8 UnusedUpdSpace13[15];
+ UINT8 UnusedUpdSpace12[15];
/** Offset 0x037D - Enable PCH Io Apic Entry 24-119
0: Disable; 1: Enable.
@@ -1128,7 +1200,7 @@ typedef struct {
/** Offset 0x037F
**/
- UINT8 UnusedUpdSpace14;
+ UINT8 UnusedUpdSpace13;
/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned
0: Disable; 1: Enable.
@@ -1228,7 +1300,7 @@ typedef struct {
/** Offset 0x0390
**/
- UINT8 UnusedUpdSpace15[3];
+ UINT8 UnusedUpdSpace14[3];
/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK
Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
@@ -1320,10 +1392,9 @@ typedef struct {
**/
UINT8 PcieRpMaxPayload[24];
-/** Offset 0x04E6 - PCIE RP Device Reset Pad Active High
- Indicated whether PERST# is active 0: Low; 1: High, See: DeviceResetPad.
+/** Offset 0x04E6
**/
- UINT8 PcieRpDeviceResetPadActiveHigh[24];
+ UINT8 UnusedUpdSpace15[24];
/** Offset 0x04FE - PCIE RP Pcie Speed
Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
@@ -1332,8 +1403,8 @@ typedef struct {
UINT8 PcieRpPcieSpeed[24];
/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method
- PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: Default; 2: Software Search;
- 4: Fixed Coeficients.
+ PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
**/
UINT8 PcieRpGen3EqPh3Method[24];
@@ -1347,15 +1418,9 @@ typedef struct {
**/
UINT8 PcieRpCompletionTimeout[24];
-/** Offset 0x055E - PCIE RP Device Reset Pad
- The PCH pin assigned to device PERST# signal if available, zero otherwise. See
- also DeviceResetPadActiveHigh.
+/** Offset 0x055E
**/
- UINT32 PcieRpDeviceResetPad[24];
-
-/** Offset 0x05BE
-**/
- UINT8 UnusedUpdSpace16[10];
+ UINT8 UnusedUpdSpace16[106];
/** Offset 0x05C8 - PCIE RP Aspm
The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
@@ -1550,6 +1615,7 @@ typedef struct {
/** Offset 0x0680 - PCH Pm Lpc Clock Run
This member describes whether or not the LPC ClockRun feature of PCH should be enabled.
+ Default value is Disabled
$EN_DIS
**/
UINT8 PchPmLpcClockRun;
@@ -1771,7 +1837,7 @@ typedef struct {
UINT8 SataRstPcieDeviceResetDelay[3];
/** Offset 0x06F5 - Enable eMMC HS400 Training
- Determine if HS400 Training is required.
+ Deprecated.
$EN_DIS
**/
UINT8 PchScsEmmcHs400TuningRequired;
@@ -1793,7 +1859,7 @@ typedef struct {
UINT8 PchScsEmmcHs400TxDataDll;
/** Offset 0x06F9 - I/O Driver Strength
- I/O driver strength: 0 - 33 Ohm, 1 - 40 Ohm, 2 - 50 Ohm.
+ Deprecated.
0:33 Ohm, 1:40 Ohm, 2:50 Ohm
**/
UINT8 PchScsEmmcHs400DriverStrength;
@@ -2192,9 +2258,15 @@ typedef struct {
**/
UINT8 PmcCpuC10GatePinEnable;
-/** Offset 0x07AB
+/** Offset 0x07AB - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x07AC
**/
- UINT8 ReservedFspsUpd[2];
+ UINT8 ReservedFspsUpd[1];
} FSP_S_CONFIG;
/** Fsp S Test Configuration
@@ -2634,13 +2706,13 @@ typedef struct {
UINT8 C1e;
/** Offset 0x080D - Enable or Disable Package Cstate Demotion
- Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
+ Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable
$EN_DIS
**/
UINT8 PkgCStateDemotion;
/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion
- Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
+ Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable
$EN_DIS
**/
UINT8 PkgCStateUnDemotion;
@@ -3111,7 +3183,7 @@ typedef struct {
UINT8 UnusedUpdSpace26[17];
/** Offset 0x0A72 - Skip POSTBOOT SAI
- This skip the Post Boot Sai programming. 0: Set Post Boot Sai; 1: Skip Post Boot Sai.
+ Deprecated
$EN_DIS
**/
UINT8 SkipPostBootSai;