summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorFurquan Shaikh <furquan@chromium.org>2016-10-04 10:53:32 -0700
committerMartin Roth <martinroth@google.com>2016-10-07 18:05:30 +0200
commit028200f75f6d8d0f947d68f41ca10fbfe05f9283 (patch)
treec56f256737b61702dbab15e0ba53a6c0766c8342 /src
parent35c01bc4e0bc72d4ba8bafc922b47f9aa47ca02d (diff)
downloadcoreboot-028200f75f6d8d0f947d68f41ca10fbfe05f9283.tar.xz
x86/acpi_device: Add support for GPIO output polarity
Instead of hard-coding the polarity of the GPIO to active high/low, accept it as a parameter in devicetree. This polarity can then be used while calling into acpi_dp_add_gpio to determine the active low status correctly. BUG=chrome-os-partner:55988 BRANCH=None TEST=Verified that correct polarity is set for reset-gpio on reef. Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
Diffstat (limited to 'src')
-rw-r--r--src/arch/x86/include/arch/acpi_device.h17
-rw-r--r--src/drivers/generic/max98357a/max98357a.c3
-rw-r--r--src/mainboard/google/lars/devicetree.cb2
-rw-r--r--src/mainboard/google/reef/variants/baseboard/devicetree.cb2
-rw-r--r--src/mainboard/intel/kunimitsu/devicetree.cb2
5 files changed, 21 insertions, 5 deletions
diff --git a/src/arch/x86/include/arch/acpi_device.h b/src/arch/x86/include/arch/acpi_device.h
index 4b3a469199..b0285d2c23 100644
--- a/src/arch/x86/include/arch/acpi_device.h
+++ b/src/arch/x86/include/arch/acpi_device.h
@@ -110,6 +110,11 @@ enum acpi_gpio_io_restrict {
ACPI_GPIO_IO_RESTRICT_PRESERVE
};
+enum acpi_gpio_polarity {
+ ACPI_GPIO_ACTIVE_HIGH = 0,
+ ACPI_GPIO_ACTIVE_LOW = 1,
+};
+
#define ACPI_GPIO_REVISION_ID 1
#define ACPI_GPIO_MAX_PINS 8
@@ -129,13 +134,23 @@ struct acpi_gpio {
uint16_t output_drive_strength; /* 1/100 mA */
int io_shared;
enum acpi_gpio_io_restrict io_restrict;
+ enum acpi_gpio_polarity polarity;
};
/* Basic output GPIO with default pull settings */
-#define ACPI_GPIO_OUTPUT(gpio) { \
+#define ACPI_GPIO_OUTPUT_ACTIVE_HIGH(gpio) { \
+ .type = ACPI_GPIO_TYPE_IO, \
+ .pull = ACPI_GPIO_PULL_DEFAULT, \
+ .io_restrict = ACPI_GPIO_IO_RESTRICT_OUTPUT, \
+ .polarity = ACPI_GPIO_ACTIVE_HIGH, \
+ .pin_count = 1, \
+ .pins = { (gpio) } }
+
+#define ACPI_GPIO_OUTPUT_ACTIVE_LOW(gpio) { \
.type = ACPI_GPIO_TYPE_IO, \
.pull = ACPI_GPIO_PULL_DEFAULT, \
.io_restrict = ACPI_GPIO_IO_RESTRICT_OUTPUT, \
+ .polarity = ACPI_GPIO_ACTIVE_LOW, \
.pin_count = 1, \
.pins = { (gpio) } }
diff --git a/src/drivers/generic/max98357a/max98357a.c b/src/drivers/generic/max98357a/max98357a.c
index 25e5104129..4a057b51d5 100644
--- a/src/drivers/generic/max98357a/max98357a.c
+++ b/src/drivers/generic/max98357a/max98357a.c
@@ -55,7 +55,8 @@ static void max98357a_fill_ssdt(struct device *dev)
/* This points to the first pin in the first gpio entry in _CRS */
path = acpi_device_path(dev);
dp = acpi_dp_new_table("_DSD");
- acpi_dp_add_gpio(dp, "sdmode-gpio", path, 0, 0, 0);
+ acpi_dp_add_gpio(dp, "sdmode-gpio", path, 0, 0,
+ config->sdmode_gpio.polarity);
acpi_dp_add_integer(dp, "sdmode-delay", config->sdmode_delay);
acpi_dp_write(dp);
diff --git a/src/mainboard/google/lars/devicetree.cb b/src/mainboard/google/lars/devicetree.cb
index e1e926be00..25bd19d9d6 100644
--- a/src/mainboard/google/lars/devicetree.cb
+++ b/src/mainboard/google/lars/devicetree.cb
@@ -279,7 +279,7 @@ chip soc/intel/skylake
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on
chip drivers/generic/max98357a
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_B2)"
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
device generic 0 on end
end
end # Intel HDA
diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
index 087f85845e..43ec2ed054 100644
--- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
@@ -84,7 +84,7 @@ chip soc/intel/apollolake
device pci 0d.3 on end # - Shared SRAM
device pci 0e.0 on # - Audio
chip drivers/generic/max98357a
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPIO_76)"
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
device generic 0 on end
end
end
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb
index a5789b0bcd..8dded98470 100644
--- a/src/mainboard/intel/kunimitsu/devicetree.cb
+++ b/src/mainboard/intel/kunimitsu/devicetree.cb
@@ -303,7 +303,7 @@ chip soc/intel/skylake
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on
chip drivers/generic/max98357a
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_E3)"
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "device_present_gpio" = "GPP_E3"
register "device_present_gpio_invert" = "1"
device generic 0 on end