summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorStefan Reinauer <stefan.reinauer@coreboot.org>2011-04-22 01:45:11 +0000
committerStefan Reinauer <stepan@openbios.org>2011-04-22 01:45:11 +0000
commit6aca1e8b26e712d056816ba936fb4d5834a07467 (patch)
treeb2a1336d6d32358d88db8743070a6105b00feb53 /src
parent3e4fb9d1a12c6a4b69702badc7223fec3b6e8ddb (diff)
downloadcoreboot-6aca1e8b26e712d056816ba936fb4d5834a07467.tar.xz
The UART divider should be calculated based on the base frequency
and baudrate, not hardcoded in addition to that. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6538 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/console/uart8250_console.c8
-rw-r--r--src/include/uart8250.h4
-rw-r--r--src/lib/uart8250.c8
-rw-r--r--src/mainboard/iwave/iWRainbowG6/Kconfig6
4 files changed, 16 insertions, 10 deletions
diff --git a/src/console/uart8250_console.c b/src/console/uart8250_console.c
index 53ca3a762e..03db400319 100644
--- a/src/console/uart8250_console.c
+++ b/src/console/uart8250_console.c
@@ -25,7 +25,13 @@ static void ttyS0_init(void)
{
static const unsigned char div[8] = { 1, 2, 3, 6, 12, 24, 48, 96 };
int b_index = 0;
- unsigned int divisor = CONFIG_TTYS0_DIV;
+ /* TODO the divisor calculation is hard coded to standard UARTs. Some
+ * UARTs won't work with these values. This should be a property of the
+ * UART used, worst case a Kconfig variable. For now live with hard
+ * codes as the only devices that might be different are the iWave
+ * iRainbowG6 and the OXPCIe952 card (and the latter is memory mapped)
+ */
+ unsigned int divisor = 115200 / CONFIG_TTYS0_BAUD;
if (get_option(&b_index, "baud_rate") == 0) {
divisor = div[b_index];
diff --git a/src/include/uart8250.h b/src/include/uart8250.h
index 3918bf1333..217558a8d5 100644
--- a/src/include/uart8250.h
+++ b/src/include/uart8250.h
@@ -28,13 +28,9 @@
#ifndef CONFIG_TTYS0_BAUD
#define CONFIG_TTYS0_BAUD 115200
#endif
-
-#ifndef CONFIG_TTYS0_DIV
#if ((115200%CONFIG_TTYS0_BAUD) != 0)
#error Bad ttys0 baud rate
#endif
-#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD)
-#endif
/* Line Control Settings */
#ifndef CONFIG_TTYS0_LCS
diff --git a/src/lib/uart8250.c b/src/lib/uart8250.c
index 03d954ba2c..e7a75017a9 100644
--- a/src/lib/uart8250.c
+++ b/src/lib/uart8250.c
@@ -88,6 +88,12 @@ void uart8250_init(unsigned base_port, unsigned divisor)
#if defined(__PRE_RAM__) || defined(__SMM__)
void uart_init(void)
{
+ /* TODO the divisor calculation is hard coded to standard UARTs. Some
+ * UARTs won't work with these values. This should be a property of the
+ * UART used, worst case a Kconfig variable. For now live with hard
+ * codes as the only devices that might be different are the iWave
+ * iRainbowG6 and the OXPCIe952 card (and the latter is memory mapped)
+ */
#if CONFIG_USE_OPTION_TABLE && !defined(__SMM__)
static const unsigned char divisor[] = { 1, 2, 3, 6, 12, 24, 48, 96 };
unsigned ttys0_div, ttys0_index;
@@ -97,7 +103,7 @@ void uart_init(void)
uart8250_init(CONFIG_TTYS0_BASE, ttys0_div);
#else
- uart8250_init(CONFIG_TTYS0_BASE, CONFIG_TTYS0_DIV);
+ uart8250_init(CONFIG_TTYS0_BASE, (115200 / CONFIG_TTYS0_BAUD));
#endif
}
#endif
diff --git a/src/mainboard/iwave/iWRainbowG6/Kconfig b/src/mainboard/iwave/iWRainbowG6/Kconfig
index 7005bd365e..7ec8029579 100644
--- a/src/mainboard/iwave/iWRainbowG6/Kconfig
+++ b/src/mainboard/iwave/iWRainbowG6/Kconfig
@@ -37,9 +37,7 @@ config IRQ_SLOT_COUNT
int
default 10
-# WTF, is this 19200?
-config TTYS0_DIV
- int
- default 6
+# This mainboard might have a higher clocked UART or might not be able to run
+# serial output at 115200 baud
endif