Remove MRC variables from 2065x CAR init.

2065x boards don't use MRC. And the space in question isn't used either.

Read number of variable range MTRRs from MSR rather than hardcoding it.

2ff is still zeroed out as unless you zero-out undocumented bits as well
boot fails.

Tested on Lenovo X201.

Change-Id: Ic574193094e7d27c2d6a4d7d3e387d989578532e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4080
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)

1 files changed, 22 insertions, 42 deletions

diff --git a/src/cpu/intel/model_2065x/cache_as_ram.inc b/src/cpu/intel/model_2065x/cache_as_ram.inc
index ec7335e50a..dce0e39dba 100644
--- a/src/cpu/intel/model_2065x/cache_as_ram.inc
+++ b/src/cpu/intel/model_2065x/cache_as_ram.inc
@@ -27,11 +27,6 @@
 #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
 #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
 
-/* Cache 4GB - MRC_SIZE_KB for MRC */
-#define CACHE_MRC_BYTES   ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1)
-#define CACHE_MRC_BASE    (0xFFFFFFFF - CACHE_MRC_BYTES)
-#define CACHE_MRC_MASK    (~CACHE_MRC_BYTES)
-
 #define CPU_PHYSMASK_HI  (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1)
 
 #define NoEvictMod_MSR 0x2e0
@@ -54,7 +49,14 @@ wait_for_sipi:
 	jc	wait_for_sipi
 
 	post_code(0x21)
-	/* Zero out all fixed range and variable range MTRRs. */
+	/* Clean-up MTRRdefType_MSR. */
+	movl	$MTRRdefType_MSR, %ecx
+	xorl	%eax, %eax
+	xorl	%edx, %edx
+	wrmsr
+
+	post_code(0x22)
+	/* Zero out all fixed range MTRRs. */
 	movl	$mtrr_table, %esi
 	movl	$((mtrr_table_end - mtrr_table) / 2), %edi
 	xorl	%eax, %eax
@@ -67,12 +69,20 @@ clear_mtrrs:
 	dec	%edi
 	jnz	clear_mtrrs
 
-	post_code(0x22)
-	/* Configure the default memory type to uncacheable. */
-	movl	$MTRRdefType_MSR, %ecx
+	/* Zero out all variable range MTRRs. */
+	movl	$MTRRcap_MSR, %ecx
 	rdmsr
-	andl	$(~0x00000cff), %eax
+	andl	$0xff, %eax
+	shl	$1, %eax
+	movl	%eax, %edi
+	movl	$0x200, %ecx
+	xorl	%eax, %eax
+	xorl	%edx, %edx
+clear_var_mtrrs:
 	wrmsr
+	add	$1, %ecx
+	dec	%edi
+	jnz	clear_var_mtrrs
 
 	post_code(0x23)
 	/* Set Cache-as-RAM base address. */
@@ -147,17 +157,6 @@ clear_mtrrs:
 	wrmsr
 
 	post_code(0x27)
-#if CONFIG_CACHE_MRC_BIN
-	/* Enable caching for ram init code to run faster */
-	movl	$MTRRphysBase_MSR(2), %ecx
-	movl	$(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax
-	xorl	%edx, %edx
-	wrmsr
-	movl	$MTRRphysMask_MSR(2), %ecx
-	movl	$(CACHE_MRC_MASK | MTRRphysMaskValid), %eax
-	movl	$CPU_PHYSMASK_HI, %edx
-	wrmsr
-#endif
 
 	post_code(0x28)
 	/* Enable cache. */
@@ -165,9 +164,8 @@ clear_mtrrs:
 	andl	$(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax
 	movl	%eax, %cr0
 
-	/* Set up the stack pointer below MRC variable space. */
-	movl	$(CACHE_AS_RAM_SIZE + CACHE_AS_RAM_BASE - \
-		  CONFIG_DCACHE_RAM_MRC_VAR_SIZE - 4 - 4096), %eax
+	/* Set up the stack pointer below the end of CAR. */
+	movl	$(CACHE_AS_RAM_SIZE + CACHE_AS_RAM_BASE - 4), %eax
 	movl	%eax, %esp
 
 	/* Restore the BIST result. */
@@ -212,16 +210,6 @@ before_romstage:
 	andl    $~1, %eax
 	wrmsr
 
-#if CONFIG_CACHE_MRC_BIN
-	/* Clear MTRR that was used to cache MRC */
-	xorl	%eax, %eax
-	xorl	%edx, %edx
-	movl	$MTRRphysBase_MSR(2), %ecx
-	wrmsr
-	movl	$MTRRphysMask_MSR(2), %ecx
-	wrmsr
-#endif
-
 	post_code(0x33)
 
 	/* Enable cache. */
@@ -321,18 +309,10 @@ __main:
 	jmp	.Lhlt
 
 mtrr_table:
-	.word 0x02FF
-
 	/* Fixed MTRRs */
 	.word 0x250, 0x258, 0x259
 	.word 0x268, 0x269, 0x26A
 	.word 0x26B, 0x26C, 0x26D
 	.word 0x26E, 0x26F
-
-	/* Variable MTRRs */
-	.word 0x200, 0x201, 0x202, 0x203
-	.word 0x204, 0x205, 0x206, 0x207
-	.word 0x208, 0x209, 0x20A, 0x20B
-	.word 0x20C, 0x20D, 0x20E, 0x20F
 mtrr_table_end: