summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2013-07-30 16:05:55 -0700
committerPatrick Georgi <patrick@georgi-clan.de>2013-12-21 23:54:46 +0100
commit911cedff97c45f0794f014ceb16a83edafd028c0 (patch)
treedd23d3a01b0aec3d066ad34ae811b30d88bf6a32 /src
parent1f529083fca3e7a39d3cfacc0f6bb02c2d232362 (diff)
downloadcoreboot-911cedff97c45f0794f014ceb16a83edafd028c0.tar.xz
lynxpoint: Route all USB ports to XHCI in finalize step
This commit adds a new Kconfig option for the LynxPoint southbridge that will have coreboot route all of the USB ports to the XHCI controller in the finalize step (i.e. after the bootloader) and disable the EHCI controller(s). Additionally when doing this the XHCI USB3 ports need to be put into an expected state on resume in order to make the kernel state machine happy. Part of this could also be done in depthcharge but there are also some resume-time steps required so it makes sense to keep it all together in coreboot. This can theoretically save ~100mW at runtime. Verify that the EHCI controller is not found in Linux and that booting from USB still works. Change-Id: I3ddfecc0ab12a4302e6034ea8d13ccd8ea2a655d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63802 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4407 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src')
-rw-r--r--src/include/cpu/x86/smm.h1
-rw-r--r--src/southbridge/intel/lynxpoint/Kconfig7
-rw-r--r--src/southbridge/intel/lynxpoint/pch.h1
-rw-r--r--src/southbridge/intel/lynxpoint/smihandler.c7
-rw-r--r--src/southbridge/intel/lynxpoint/usb_xhci.c102
5 files changed, 108 insertions, 10 deletions
diff --git a/src/include/cpu/x86/smm.h b/src/include/cpu/x86/smm.h
index 607c0f0a0d..feb50ecb36 100644
--- a/src/include/cpu/x86/smm.h
+++ b/src/include/cpu/x86/smm.h
@@ -372,6 +372,7 @@ typedef struct {
#define APM_CNT_ACPI_ENABLE 0xe1
#define APM_CNT_MBI_UPDATE 0xeb
#define APM_CNT_GNVS_UPDATE 0xea
+#define APM_CNT_FINALIZE 0xcb
#define APM_STS 0xb3
/* SMI handler function prototypes */
diff --git a/src/southbridge/intel/lynxpoint/Kconfig b/src/southbridge/intel/lynxpoint/Kconfig
index 28ebdb6c2f..5ff00db1e6 100644
--- a/src/southbridge/intel/lynxpoint/Kconfig
+++ b/src/southbridge/intel/lynxpoint/Kconfig
@@ -76,4 +76,11 @@ config ME_MBP_CLEAR_LATE
finalize step. This can speed up boot time if the ME takes
a long time to indicate this status.
+config FINALIZE_USB_ROUTE_XHCI
+ bool "Route all ports to XHCI controller in finalize step"
+ default y
+ help
+ If you set this option to y, the USB ports will be routed
+ to the XHCI controller during the finalize SMM callback.
+
endif
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index c16c009038..6e1b10ca86 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -92,6 +92,7 @@ void intel_pch_finalize_smm(void);
void usb_ehci_sleep_prepare(device_t dev, u8 slp_typ);
void usb_ehci_disable(device_t dev);
void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ);
+void usb_xhci_route_all(void);
#endif
diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c
index e920cfe3e2..d1e9bbc7cd 100644
--- a/src/southbridge/intel/lynxpoint/smihandler.c
+++ b/src/southbridge/intel/lynxpoint/smihandler.c
@@ -135,8 +135,10 @@ static void southbridge_smi_sleep(void)
mainboard_smi_sleep(slp_typ-2);
/* USB sleep preparations */
+#if !CONFIG_FINALIZE_USB_ROUTE_XHCI
usb_ehci_sleep_prepare(PCH_EHCI1_DEV, slp_typ);
usb_ehci_sleep_prepare(PCH_EHCI2_DEV, slp_typ);
+#endif
usb_xhci_sleep_prepare(PCH_XHCI_DEV, slp_typ);
#if CONFIG_ELOG_GSMI
@@ -314,6 +316,11 @@ static void southbridge_smi_apmc(void)
printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
}
break;
+ case APM_CNT_FINALIZE:
+#if CONFIG_FINALIZE_USB_ROUTE_XHCI
+ usb_xhci_route_all();
+#endif
+ break;
#if CONFIG_ELOG_GSMI
case ELOG_GSMI_APM_CNT:
southbridge_smi_gsmi();
diff --git a/src/southbridge/intel/lynxpoint/usb_xhci.c b/src/southbridge/intel/lynxpoint/usb_xhci.c
index df264e31f4..dbf0f4095d 100644
--- a/src/southbridge/intel/lynxpoint/usb_xhci.c
+++ b/src/southbridge/intel/lynxpoint/usb_xhci.c
@@ -26,8 +26,6 @@
#include <arch/io.h>
#include "pch.h"
-#ifdef __SMM__
-
static u32 usb_xhci_mem_base(device_t dev)
{
u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
@@ -39,10 +37,6 @@ static u32 usb_xhci_mem_base(device_t dev)
return mem_base & ~0xf;
}
-#endif
-
-#if 0
-
static int usb_xhci_port_count_usb3(device_t dev)
{
if (pch_is_lp()) {
@@ -76,6 +70,8 @@ static void usb_xhci_reset_port_usb3(u32 mem_base, int port)
write32(portsc, read32(portsc) | XHCI_USB3_PORTSC_WPR);
}
+#ifdef __SMM__
+
#define XHCI_RESET_DELAY_US 1000 /* 1ms */
#define XHCI_RESET_TIMEOUT 100 /* 100ms */
@@ -155,10 +151,6 @@ static void usb_xhci_reset_usb3(device_t dev, int all)
usb_xhci_reset_status_usb3(mem_base, port);
}
-#endif
-
-#ifdef __SMM__
-
/* Handler for XHCI controller on entry to S3/S4/S5 */
void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ)
{
@@ -197,6 +189,47 @@ void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ)
pci_or_config16(dev, XHCI_PWR_CTL_STS, PWR_CTL_ENABLE_PME);
}
+/* Route all ports to XHCI controller */
+void usb_xhci_route_all(void)
+{
+ u32 port_mask, route;
+ u16 reg16;
+
+ /* Skip if EHCI is already disabled */
+ if (RCBA32(FD) & PCH_DISABLE_EHCI1)
+ return;
+
+ /* Set D0 state */
+ reg16 = pci_read_config16(PCH_XHCI_DEV, XHCI_PWR_CTL_STS);
+ reg16 &= ~PWR_CTL_SET_MASK;
+ reg16 |= PWR_CTL_SET_D0;
+ pci_write_config16(PCH_XHCI_DEV, XHCI_PWR_CTL_STS, reg16);
+
+ /* Set USB3 superspeed enable */
+ port_mask = pci_read_config32(PCH_XHCI_DEV, XHCI_USB3PRM);
+ route = pci_read_config32(PCH_XHCI_DEV, XHCI_USB3PR);
+ route &= ~XHCI_USB3PR_SSEN;
+ route |= XHCI_USB3PR_SSEN & port_mask;
+ pci_write_config32(PCH_XHCI_DEV, XHCI_USB3PR, route);
+
+ /* Route USB2 ports to XHCI controller */
+ port_mask = pci_read_config32(PCH_XHCI_DEV, XHCI_USB2PRM);
+ route = pci_read_config32(PCH_XHCI_DEV, XHCI_USB2PR);
+ route &= ~XHCI_USB2PR_HCSEL;
+ route |= XHCI_USB2PR_HCSEL & port_mask;
+ pci_write_config32(PCH_XHCI_DEV, XHCI_USB2PR, route);
+
+ /* Disable EHCI controller */
+ usb_ehci_disable(PCH_EHCI1_DEV);
+
+ /* LynxPoint-H has a second EHCI controller */
+ if (!pch_is_lp())
+ usb_ehci_disable(PCH_EHCI2_DEV);
+
+ /* Reset and clear port change status */
+ usb_xhci_reset_usb3(PCH_XHCI_DEV, 1);
+}
+
#else /* !__SMM__ */
static void usb_xhci_clock_gating(device_t dev)
@@ -245,6 +278,49 @@ static void usb_xhci_clock_gating(device_t dev)
pci_write_config32(dev, 0xa4, reg32);
}
+/* Re-enable ports that are disabled */
+static void usb_xhci_enable_ports_usb3(device_t dev)
+{
+#if CONFIG_FINALIZE_USB_ROUTE_XHCI
+ int port;
+ u32 portsc, status, disabled;
+ u32 mem_base = usb_xhci_mem_base(dev);
+ int port_count = usb_xhci_port_count_usb3(dev);
+
+ if (!mem_base || !port_count)
+ return;
+
+ /* Get port disable override map */
+ disabled = pci_read_config32(dev, XHCI_USB3PDO);
+
+ for (port = 0; port < port_count; port++) {
+ /* Skip overridden ports */
+ if (disabled & (1 << port))
+ continue;
+ portsc = mem_base + XHCI_USB3_PORTSC(port);
+ status = read32(portsc) & XHCI_USB3_PORTSC_PLS;
+
+ switch (status) {
+ case XHCI_PLSR_RXDETECT:
+ /* Clear change status */
+ printk(BIOS_DEBUG, "usb_xhci reset port %d\n", port);
+ usb_xhci_reset_status_usb3(mem_base, port);
+ break;
+ case XHCI_PLSR_DISABLED:
+ default:
+ /* Transition to enabled */
+ printk(BIOS_DEBUG, "usb_xhci enable port %d\n", port);
+ usb_xhci_reset_port_usb3(mem_base, port);
+ status = read32(portsc);
+ status &= ~XHCI_USB3_PORTSC_PLS;
+ status |= XHCI_PLSW_ENABLE | XHCI_USB3_PORTSC_LWS;
+ write32(portsc, status);
+ break;
+ }
+ }
+#endif
+}
+
static void usb_xhci_init(device_t dev)
{
struct resource *bar0 = find_resource(dev, PCI_BASE_ADDRESS_0);
@@ -313,6 +389,12 @@ static void usb_xhci_init(device_t dev)
reg32 &= ~(1 << 23); /* unsupported request */
reg32 |= (1 << 31);
pci_write_config32(dev, 0x40, reg32);
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* Enable ports that are disabled before returning to OS */
+ if (acpi_slp_type == 3)
+ usb_xhci_enable_ports_usb3(dev);
+#endif
}
static void usb_xhci_set_subsystem(device_t dev, unsigned vendor,