vendorcode/google/chromeos: Introduce helper for CSE board reset

When CSE Lite jumps from RO to RW, certain boards need to request
Embedded Controller (EC) to trigger cold reset of SoC. This change
introduces a helper to override the default global reset.

BUG=None
TEST=Ensure that Drawcia board boots to OS. Ensure that global reset is
triggered when cr50 is running firmware versions newer than 0.0.22. On
cr50 versions 0.0.22 or older, EC triggers cold reset of AP.

Change-Id: I8078e2436d1d58a650bf7b0cf38b5bb89a474187
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>

3 files changed, 50 insertions, 0 deletions

diff --git a/src/vendorcode/google/chromeos/Kconfig b/src/vendorcode/google/chromeos/Kconfig
index f48069ff86..0528d00fea 100644
--- a/src/vendorcode/google/chromeos/Kconfig
+++ b/src/vendorcode/google/chromeos/Kconfig
@@ -92,5 +92,16 @@ config CHROMEOS_DSM_CALIB
 	  to ACPI DSD table in device driver. These parameters will be applied by kernel driver
 	  through device property at boot.
 
+config CHROMEOS_CSE_BOARD_RESET_OVERRIDE
+	bool
+	default n
+	depends on SOC_INTEL_CSE_LITE_SKU
+	help
+	  On some boards that run old firmware version in cr50, Embedded Controller (EC) needs
+	  to trigger the cold reset of Application Processor (AP) when CSE jumps from RO to RW
+	  so that cr50 resets the TPM state. This is required on boards where the cr50 firmware
+	  does not understand the new cr50 strap config (applicable only to boards using strap
+	  config 0xe). Enabling this config will help to override the default global reset.
+
 endif # CHROMEOS
 endmenu
diff --git a/src/vendorcode/google/chromeos/Makefile.inc b/src/vendorcode/google/chromeos/Makefile.inc
index a25700f8bb..b429d6b14a 100644
--- a/src/vendorcode/google/chromeos/Makefile.inc
+++ b/src/vendorcode/google/chromeos/Makefile.inc
@@ -10,6 +10,7 @@ ramstage-$(CONFIG_HAVE_REGULATORY_DOMAIN) += wrdd.c
 ramstage-$(CONFIG_USE_SAR) += sar.c
 ramstage-$(CONFIG_CHROMEOS_DSM_CALIB) += dsm_calib.c
 ramstage-$(CONFIG_TPM_CR50) += cr50_enable_update.c
+ramstage-$(CONFIG_CHROMEOS_CSE_BOARD_RESET_OVERRIDE) += cse_board_reset.c
 
 bootblock-y += watchdog.c
 verstage-y += watchdog.c
diff --git a/src/vendorcode/google/chromeos/cse_board_reset.c b/src/vendorcode/google/chromeos/cse_board_reset.c
new file mode 100644
index 0000000000..6034f0d14c
--- /dev/null
+++ b/src/vendorcode/google/chromeos/cse_board_reset.c
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <arch/cache.h>
+#include <arch/io.h>
+#include <cf9_reset.h>
+#include <console/console.h>
+#include <drivers/spi/tpm/tpm.h>
+#include <ec/google/chromeec/ec.h>
+#include <halt.h>
+#include <intelblocks/cse.h>
+#include <security/tpm/tss.h>
+
+void cse_board_reset(void)
+{
+	struct cr50_firmware_version version;
+
+	/* Initialize TPM and get the cr50 firmware version. */
+	tlcl_lib_init();
+	cr50_get_firmware_version(&version);
+	/*
+	 * Cr50 firmware versions 0.[3|4].20 or newer support strap config 0xe where PLTRST from
+	 * AP is connected to cr50's PLTRST# signal. So return immediately and trigger a
+	 * global reset.
+	 */
+	if (version.epoch != 0 || version.major > 4 ||
+			(version.major >= 3 && version.minor >= 20))
+		return;
+
+	printk(BIOS_INFO, "Initiating request to EC to trigger cold reset\n");
+	/*
+	 * Clean the data cache and set the full reset bit, so that when EC toggles
+	 * SYS_RESET# pin, AP makes a trip to S5 and then to S0.
+	 */
+	dcache_clean_all();
+	outb(FULL_RST, RST_CNT);
+	if (!google_chromeec_ap_reset())
+		halt();
+}