mb: Fix typos in comments in AGESA boards

Change-Id: I4821c48ccac92f412126cea0f22cca5fd8bf8647
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>

7 files changed, 61 insertions, 61 deletions

diff --git a/src/mainboard/amd/olivehill/BiosCallOuts.c b/src/mainboard/amd/olivehill/BiosCallOuts.c
index 4f780b35c1..6e29d84179 100644
--- a/src/mainboard/amd/olivehill/BiosCallOuts.c
+++ b/src/mainboard/amd/olivehill/BiosCallOuts.c
@@ -95,13 +95,13 @@ static const CODEC_TBL_LIST OlivehillCodecTableList[] =
 
 /* Olivehill Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommand */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/amd/parmer/BiosCallOuts.c b/src/mainboard/amd/parmer/BiosCallOuts.c
index 59d6bf6f0b..322b22019a 100644
--- a/src/mainboard/amd/parmer/BiosCallOuts.c
+++ b/src/mainboard/amd/parmer/BiosCallOuts.c
@@ -95,13 +95,13 @@ static const CODEC_TBL_LIST CodecTableList[] =
 
 /* Parmer Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommand */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/amd/thatcher/BiosCallOuts.c b/src/mainboard/amd/thatcher/BiosCallOuts.c
index f8b7539ed8..01dc5ab777 100644
--- a/src/mainboard/amd/thatcher/BiosCallOuts.c
+++ b/src/mainboard/amd/thatcher/BiosCallOuts.c
@@ -93,15 +93,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
 #define FREQ_14HZ			0xFE
 #define FREQ_11HZ			0xFF
 
-/* Parmer Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommand */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
index 9ebef559a5..27d1dcaa9a 100644
--- a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
+++ b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
@@ -97,15 +97,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
 #define FREQ_14HZ			0xFE
 #define FREQ_11HZ			0xFF
 
-/*  Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -160,12 +160,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommand */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/biostar/a68n_5200/BiosCallOuts.c b/src/mainboard/biostar/a68n_5200/BiosCallOuts.c
index 0caa71899d..fe4fab5a12 100644
--- a/src/mainboard/biostar/a68n_5200/BiosCallOuts.c
+++ b/src/mainboard/biostar/a68n_5200/BiosCallOuts.c
@@ -93,15 +93,15 @@ static const CODEC_TBL_LIST OlivehillCodecTableList[] =
 #define FREQ_14HZ			0xFE
 #define FREQ_11HZ			0xFF
 
-/* Olivehill Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommand */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
index a3fbb25c79..8fa8ab5bf3 100644
--- a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
+++ b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
@@ -93,15 +93,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
 #define FREQ_14HZ			0xFE
 #define FREQ_11HZ			0xFF
 
-/*  Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommand way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommand */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/lenovo/g505s/BiosCallOuts.c b/src/mainboard/lenovo/g505s/BiosCallOuts.c
index 876b524a78..dfe53eaad9 100644
--- a/src/mainboard/lenovo/g505s/BiosCallOuts.c
+++ b/src/mainboard/lenovo/g505s/BiosCallOuts.c
@@ -92,15 +92,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
 #define FREQ_14HZ			0xFE
 #define FREQ_11HZ			0xFF
 
-/* Parmer Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
  * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
+ *  HWM failed to read the input temperature via I2C,
+ *  if other software switches the I2C switch by mistake or intention.
+ *  We recommend using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
-	/* Enable IMC fan control. the recommend way */
+	/* Enable IMC fan control, the recommended way */
 	if (CONFIG(HUDSON_IMC_FWM)) {
 		imc_reg_init();
 
@@ -155,12 +155,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
 
 		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwrite it.
-		 * so we remove it from AGESA code. Please See FchInitLateHwm.
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+		 * So we remove it from AGESA code. Please See FchInitLateHwm.
 		 */
 	} else {
-		/* HWM fan control, the way not recommend */
+		/* HWM fan control, the way not recommended */
 		FchParams->Imc.ImcEnable = FALSE;
 		FchParams->Hwm.HwMonitorEnable = TRUE;
 		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */