summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorElyes HAOUAS <ehaouas@noos.fr>2016-09-17 18:57:12 +0200
committerPatrick Georgi <pgeorgi@google.com>2016-09-20 21:28:51 +0200
commit374c39e3cfbb51927860756d32a77d0afd3752a6 (patch)
treea0883ac958a24b7e9341d6860a3fa0b7b5cdf1da /src
parent22710a66ac8f01fc4556bb1eaaa50c30352881df (diff)
downloadcoreboot-374c39e3cfbb51927860756d32a77d0afd3752a6.tar.xz
northbridge/via: Add space around operators
Change-Id: I87f8978b8ec6ddc11dd66a77cbb630e057f9831b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16623 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
Diffstat (limited to 'src')
-rw-r--r--src/northbridge/via/cn700/raminit.c8
-rw-r--r--src/northbridge/via/cn700/vga.c22
-rw-r--r--src/northbridge/via/cx700/early_smbus.c2
-rw-r--r--src/northbridge/via/cx700/lpc.c2
-rw-r--r--src/northbridge/via/cx700/raminit.c8
-rw-r--r--src/northbridge/via/cx700/vga.c10
-rw-r--r--src/northbridge/via/vx800/dev_init.c144
-rw-r--r--src/northbridge/via/vx800/dram_init.h2
-rw-r--r--src/northbridge/via/vx800/drdy_bl.c32
-rw-r--r--src/northbridge/via/vx800/freq_setting.c14
-rw-r--r--src/northbridge/via/vx800/lpc.c20
-rw-r--r--src/northbridge/via/vx800/uma_ram_setting.c8
-rw-r--r--src/northbridge/via/vx800/vga.c18
13 files changed, 145 insertions, 145 deletions
diff --git a/src/northbridge/via/cn700/raminit.c b/src/northbridge/via/cn700/raminit.c
index f85f68e619..e4384ce697 100644
--- a/src/northbridge/via/cn700/raminit.c
+++ b/src/northbridge/via/cn700/raminit.c
@@ -258,9 +258,9 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
{
u8 reg;
- /* Set WR=5 */
+ /* Set WR = 5 */
pci_write_config8(ctrl->d0f3, 0x61, 0xe0);
- /* Set CAS=4 */
+ /* Set CAS = 4 */
pci_write_config8(ctrl->d0f3, 0x62, 0xfa);
/* DRAM timing-3 */
pci_write_config8(ctrl->d0f3, 0x63, 0xca);
@@ -283,7 +283,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
pci_write_config8(ctrl->d0f3, 0x52, 0x33);
pci_write_config8(ctrl->d0f3, 0x53, 0x3f);
- /* Set to DDR2 SDRAM, BL=8 (0xc8, 0xc0 for bl=4) */
+ /* Set to DDR2 SDRAM, BL = 8 (0xc8, 0xc0 for bl = 4) */
pci_write_config8(ctrl->d0f3, 0x6c, 0xc8);
/* DRAM Bus Turn-Around Setting */
@@ -426,7 +426,7 @@ static void sdram_enable(device_t dev, u8 *rank_address)
/* 6. Mode register set. */
PRINT_DEBUG_MEM("RAM Enable 6: Mode register set\n");
- /* Safe value for now, BL=8, WR=5, CAS=4 */
+ /* Safe value for now, BL = 8, WR = 5, CAS = 4 */
/*
* (E)MRS values are from the BPG. No direct explanation is given, but
* they should somehow conform to the JEDEC DDR2 SDRAM Specification
diff --git a/src/northbridge/via/cn700/vga.c b/src/northbridge/via/cn700/vga.c
index 10b7f65a5d..4925f2b44e 100644
--- a/src/northbridge/via/cn700/vga.c
+++ b/src/northbridge/via/cn700/vga.c
@@ -35,16 +35,16 @@
static int via_cn700_int15_handler(void)
{
- int res=0;
+ int res = 0;
printk(BIOS_DEBUG, "via_cn700_int15_handler\n");
switch(X86_EAX & 0xffff) {
case 0x5f19:
break;
case 0x5f18:
- X86_EAX=0x5f;
- X86_EBX=0x545; // MCLK = 133, 32M frame buffer, 256 M main memory
- X86_ECX=0x060;
- res=1;
+ X86_EAX = 0x5f;
+ X86_EBX = 0x545; // MCLK = 133, 32M frame buffer, 256 M main memory
+ X86_ECX = 0x060;
+ res = 1;
break;
case 0x5f00:
X86_EAX = 0x8600;
@@ -55,14 +55,14 @@ static int via_cn700_int15_handler(void)
res = 1;
break;
case 0x5f02:
- X86_EAX=0x5f;
- X86_EBX= (X86_EBX & 0xffff0000) | 2;
- X86_ECX= (X86_ECX & 0xffff0000) | 0x401; // PAL + crt only
- X86_EDX= (X86_EDX & 0xffff0000) | 0; // TV Layout - default
- res=1;
+ X86_EAX = 0x5f;
+ X86_EBX = (X86_EBX & 0xffff0000) | 2;
+ X86_ECX = (X86_ECX & 0xffff0000) | 0x401; // PAL + crt only
+ X86_EDX = (X86_EDX & 0xffff0000) | 0; // TV Layout - default
+ res = 1;
break;
case 0x5f0f:
- X86_EAX=0x860f;
+ X86_EAX = 0x860f;
break;
default:
printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
diff --git a/src/northbridge/via/cx700/early_smbus.c b/src/northbridge/via/cx700/early_smbus.c
index 6109ea02c0..44aa743f88 100644
--- a/src/northbridge/via/cx700/early_smbus.c
+++ b/src/northbridge/via/cx700/early_smbus.c
@@ -142,7 +142,7 @@ static void set_ics_data(unsigned char dev, int data, char len)
outb(0xff, SMBBLKDAT);
}
- //for (i=0; i < len; i++)
+ //for (i = 0; i < len; i++)
// outb(data[i],SMBBLKDAT);
outb(dev, SMBXMITADD);
diff --git a/src/northbridge/via/cx700/lpc.c b/src/northbridge/via/cx700/lpc.c
index 2d7431628f..e9e4d98e33 100644
--- a/src/northbridge/via/cx700/lpc.c
+++ b/src/northbridge/via/cx700/lpc.c
@@ -87,7 +87,7 @@ static void setup_pm(device_t dev)
/* set ACPI irq to 9 */
pci_write_config8(dev, 0x82, 0x49);
- /* Primary interupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */
+ /* Primary interupt channel, define wake events 0 = IRQ0 15 = IRQ15 1 = en. */
pci_write_config16(dev, 0x84, 0x609a);
/* SMI output level to low, 7.5us throttle clock */
diff --git a/src/northbridge/via/cx700/raminit.c b/src/northbridge/via/cx700/raminit.c
index 7d3fcbeb0b..14a17d4771 100644
--- a/src/northbridge/via/cx700/raminit.c
+++ b/src/northbridge/via/cx700/raminit.c
@@ -90,7 +90,7 @@
#define REGISTERPRESET(bus,dev,fun,bdfspec) \
{ u8 j, reg; \
- for (j=0; j<(sizeof((bdfspec))/sizeof(struct regmask)); j++) { \
+ for (j = 0; j < (sizeof((bdfspec))/sizeof(struct regmask)); j++) { \
printk(BIOS_DEBUG, "Writing bus " #bus " dev " #dev " fun " #fun " register "); \
printk(BIOS_DEBUG, "%02x", (bdfspec)[j].reg); \
printk(BIOS_DEBUG, "\n"); \
@@ -303,8 +303,8 @@ static const u8 Init_Rank_Reg_Table[] = {
static const u16 DDR2_MRS_table[] = {
/* CL: 2, 3, 4, 5 */
- 0x150, 0x1d0, 0x250, 0x2d0, /* BL=4 ;Use 1X-bandwidth MA table to init DRAM */
- 0x158, 0x1d8, 0x258, 0x2d8, /* BL=8 ;Use 1X-bandwidth MA table to init DRAM */
+ 0x150, 0x1d0, 0x250, 0x2d0, /* BL = 4 ;Use 1X-bandwidth MA table to init DRAM */
+ 0x158, 0x1d8, 0x258, 0x2d8, /* BL = 8 ;Use 1X-bandwidth MA table to init DRAM */
};
#define MRS_DDR2_TWR2 ((0 << 15) | (0 << 20) | (1 << 12))
@@ -1050,7 +1050,7 @@ static void step_2_19(const struct mem_controller *ctrl)
/* Step 17. Mode register set. Wait 200us. */
printk(BIOS_SPEW, "\nRAM Enable 4: Mode register set\n");
- //safe value for now, BL=8, WR=4, CAS=4
+ //safe value for now, BL = 8, WR = 4, CAS = 4
do_ram_command(ctrl, RAM_COMMAND_MRS);
udelay(200);
diff --git a/src/northbridge/via/cx700/vga.c b/src/northbridge/via/cx700/vga.c
index 16f0ea0061..7cb84d2d7e 100644
--- a/src/northbridge/via/cx700/vga.c
+++ b/src/northbridge/via/cx700/vga.c
@@ -42,7 +42,7 @@
static int via_cx700_int15_handler(void)
{
- int res=0;
+ int res = 0;
u8 mem_speed;
#define MEMORY_SPEED_66MHZ (0 << 4)
@@ -83,7 +83,7 @@ static int via_cx700_int15_handler(void)
X86_ECX = 0x00000000; // 0 -> default
// TV Layout - default
X86_EDX = (X86_EDX & 0xffffff00) | 0;
- res=1;
+ res = 1;
break;
case 0x5f0b: /* Get Expansion Setting */
@@ -91,12 +91,12 @@ static int via_cx700_int15_handler(void)
X86_ECX = X86_ECX & 0xffffff00; // non-expansion
// regs->ecx = regs->ecx & 0xffffff00 | 1; // expansion
- res=1;
+ res = 1;
break;
case 0x5f0f: /* VGA Post Completion */
X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f;
- res=1;
+ res = 1;
break;
case 0x5f18:
@@ -113,7 +113,7 @@ static int via_cx700_int15_handler(void)
X86_EBX |= memory_mapping[mem_speed];
- res=1;
+ res = 1;
break;
default:
diff --git a/src/northbridge/via/vx800/dev_init.c b/src/northbridge/via/vx800/dev_init.c
index 819605018e..7cd557a02c 100644
--- a/src/northbridge/via/vx800/dev_init.c
+++ b/src/northbridge/via/vx800/dev_init.c
@@ -38,13 +38,13 @@ static const u8 DramRegTbl[][3] = {
/* Reg AND OR */
{0x50, 0x11, 0xEE}, // DDR default MA7 for DRAM init
{0x51, 0x11, 0x60}, // DDR default MA3 for CHB init
- {0x52, 0x00, 0x33}, // DDR use BA0=M17, BA1=M18,
- {0x53, 0x00, 0x3F}, // DDR BA2=M19
+ {0x52, 0x00, 0x33}, // DDR use BA0 = M17, BA1 = M18,
+ {0x53, 0x00, 0x3F}, // DDR BA2 = M19
- {0x54, 0x00, 0x00}, // default PR0=VR0; PR1=VR1
- {0x55, 0x00, 0x00}, // default PR2=VR2; PR3=VR3
- {0x56, 0x00, 0x00}, // default PR4=VR4; PR5=VR5
- {0x57, 0x00, 0x00}, // default PR4=VR4; PR5=VR5
+ {0x54, 0x00, 0x00}, // default PR0 = VR0; PR1 = VR1
+ {0x55, 0x00, 0x00}, // default PR2 = VR2; PR3 = VR3
+ {0x56, 0x00, 0x00}, // default PR4 = VR4; PR5 = VR5
+ {0x57, 0x00, 0x00}, // default PR4 = VR4; PR5 = VR5
{0x60, 0x00, 0x00}, // disable fast turn-around
{0x65, 0x00, 0xD9}, // AGP timer = 0XD; Host timer = 8;
@@ -317,15 +317,15 @@ Purpose : Initialize DDR2 by standard sequence
===================================================================*/
// DLL: Enable Reset
-static const u32 CHA_MRS_DLL_150[2] = { 0x00020200, 0x00000800 }; // with 150 ohm (A17=1, A9=1), (A11=1)(cpu address)
-static const u32 CHA_MRS_DLL_75[2] = { 0x00020020, 0x00000800 }; // with 75 ohm (A17=1, A5=1), (A11=1)(cpu address)
+static const u32 CHA_MRS_DLL_150[2] = { 0x00020200, 0x00000800 }; // with 150 ohm (A17 = 1, A9 = 1), (A11 = 1)(cpu address)
+static const u32 CHA_MRS_DLL_75[2] = { 0x00020020, 0x00000800 }; // with 75 ohm (A17 = 1, A5 = 1), (A11 = 1)(cpu address)
// CPU(DRAM)
// { DLL: Enable. A17(BA0)=1 and A3(MA0)=0 }
// { DLL: reset. A11(MA8)=1 }
//
-// DDR2 CL=2 CL=3 CL=4 CL=5 CL=6(Burst type=interleave)(WR fine tune in code)
-static const u16 CHA_DDR2_MRS_table[5] = { 0x0150, 0x01D0, 0x0250, 0x02D0, 0x350 }; // BL=4 ;Use 1X-bandwidth MA table to init DRAM
+// DDR2 CL = 2 CL = 3 CL = 4 CL = 5 CL = 6(Burst type = interleave)(WR fine tune in code)
+static const u16 CHA_DDR2_MRS_table[5] = { 0x0150, 0x01D0, 0x0250, 0x02D0, 0x350 }; // BL = 4 ;Use 1X-bandwidth MA table to init DRAM
// MA11 MA10(AP) MA9
#define CHA_MRS_DDR2_TWR2 (0 << 13) + (0 << 20) + (1 << 12) // Value = 001000h
@@ -334,20 +334,20 @@ static const u16 CHA_DDR2_MRS_table[5] = { 0x0150, 0x01D0, 0x0250, 0x02D0, 0x350
#define CHA_MRS_DDR2_TWR5 (1 << 13) + (0 << 20) + (0 << 12) // Value = 002000h
#define CHA_MRS_DDR2_TWR6 (1 << 13) + (0 << 20) + (1 << 12) // Value = 003000h
-// DDR2 Twr=2 Twr=3 Twr=4 Twr=5
+// DDR2 Twr = 2 Twr = 3 Twr = 4 Twr = 5
static const u32 CHA_DDR2_Twr_table[5] = {
CHA_MRS_DDR2_TWR2, CHA_MRS_DDR2_TWR3, CHA_MRS_DDR2_TWR4,
CHA_MRS_DDR2_TWR5, CHA_MRS_DDR2_TWR6
};
-#define CHA_OCD_Exit_150ohm 0x20200 // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=1,MA2=0 (DRAM bus address)
-// A17=1, A12=A11=A10=0,A9=1 ,A5=0 (CPU address)
-#define CHA_OCD_Default_150ohm 0x21E00 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=1,MA2=0 (DRAM bus address)
-// A17=1, A12=A11=A10=1,A9=1 ,A5=0 (CPU address)
-#define CHA_OCD_Exit_75ohm 0x20020 // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=0,MA2=1 (DRAM bus address)
-// A17=1, A12=A11=A10=0,A9=0 ,A5=1 (CPU address)
-#define CHA_OCD_Default_75ohm 0x21C20 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=0,MA2=1 (DRAM bus address)
-// A17=1, A12=A11=A10=1,A9=0 ,A5=1 (CPU address)
+#define CHA_OCD_Exit_150ohm 0x20200 // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 0,MA6 = 1,MA2 = 0 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 0,A9 = 1 ,A5 = 0 (CPU address)
+#define CHA_OCD_Default_150ohm 0x21E00 // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 1,MA6 = 1,MA2 = 0 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 1,A9 = 1 ,A5 = 0 (CPU address)
+#define CHA_OCD_Exit_75ohm 0x20020 // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 0,MA6 = 0,MA2 = 1 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 0,A9 = 0 ,A5 = 1 (CPU address)
+#define CHA_OCD_Default_75ohm 0x21C20 // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 1,MA6 = 0,MA2 = 1 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 1,A9 = 0 ,A5 = 1 (CPU address)
void InitDDR2CHA(DRAM_SYS_ATTR *DramAttr)
{
@@ -527,14 +527,14 @@ Purpose : Initialize DDR2 of CHB by standard sequence
Reference :
===================================================================*/
/*// DLL: Enable Reset
-static const u32 CHB_MRS_DLL_150[2] = { 0x00020200 | (1 << 20), 0x00000800 }; // with 150 ohm (A17=1, A9=1), (A11=1)(cpu address)
-//u32 CHB_MRS_DLL_75[2] = { 0x00020020 | (1 << 20), 0x00000800 }; // with 75 ohm (A17=1, A5=1), (A11=1)(cpu address)
+static const u32 CHB_MRS_DLL_150[2] = { 0x00020200 | (1 << 20), 0x00000800 }; // with 150 ohm (A17 = 1, A9 = 1), (A11 = 1)(cpu address)
+//u32 CHB_MRS_DLL_75[2] = { 0x00020020 | (1 << 20), 0x00000800 }; // with 75 ohm (A17 = 1, A5 = 1), (A11 = 1)(cpu address)
// CPU(DRAM)
// { DLL: Enable. A17(BA0)=1 and A3(MA0)=0 }
// { DLL: reset. A11(MA8)=1 }
//
-// DDR2 CL=2 CL=3 CL=4 CL=5 (Burst type=interleave)(WR fine tune in code)
-static const u16 CHB_DDR2_MRS_table[4] ={ 0x0150, 0x01D0, 0x0250, 0x02D0 }; // BL=4 ;Use 1X-bandwidth MA table to init DRAM
+// DDR2 CL = 2 CL = 3 CL = 4 CL = 5 (Burst type = interleave)(WR fine tune in code)
+static const u16 CHB_DDR2_MRS_table[4] ={ 0x0150, 0x01D0, 0x0250, 0x02D0 }; // BL = 4 ;Use 1X-bandwidth MA table to init DRAM
// MA11 MA10(AP) MA9
#define CHB_MRS_DDR2_TWR2 (0 << 13) + (0 << 20) + (1 << 12) // Value = 001000h
@@ -543,17 +543,17 @@ static const u16 CHB_DDR2_MRS_table[4] ={ 0x0150, 0x01D0, 0x0250, 0x02D0 }; //
#define CHB_MRS_DDR2_TWR5 (1 << 13) + (0 << 20) + (0 << 12) // Value = 002000h
#define CHB_MRS_DDR2_TWR6 (1 << 13) + (0 << 20) + (1 << 12) // Value = 003000h
-// DDR2 Twr=2 Twr=3 Twr=4 Twr=5
+// DDR2 Twr = 2 Twr = 3 Twr = 4 Twr = 5
static const u32 CHB_DDR2_Twr_table[5] = { CHB_MRS_DDR2_TWR2, CHB_MRS_DDR2_TWR3, CHB_MRS_DDR2_TWR4, CHB_MRS_DDR2_TWR5, CHB_MRS_DDR2_TWR6 };
-#define CHB_OCD_Exit_150ohm 0x20200 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=1,MA2=0 (DRAM bus address)
-// A17=1, A12=A11=A10=0,A9=1 ,A5=0 (CPU address)
-#define CHB_OCD_Default_150ohm 0x21E00 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=1,MA2=0 (DRAM bus address)
-// A17=1, A12=A11=A10=1,A9=1 ,A5=0 (CPU address)
-//#define CHB_OCD_Exit_75ohm 0x20020 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=0,MA2=1 (DRAM bus address)
-// A17=1, A12=A11=A10=0,A9=0 ,A5=1 (CPU address)
-//#define CHB_OCD_Default_75ohm 0x21C20 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=0,MA2=1 (DRAM bus address)
-// A17=1, A12=A11=A10=1,A9=0 ,A5=1 (CPU address)
+#define CHB_OCD_Exit_150ohm 0x20200 | (1 << 20) // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 0,MA6 = 1,MA2 = 0 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 0,A9 = 1 ,A5 = 0 (CPU address)
+#define CHB_OCD_Default_150ohm 0x21E00 | (1 << 20) // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 1,MA6 = 1,MA2 = 0 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 1,A9 = 1 ,A5 = 0 (CPU address)
+//#define CHB_OCD_Exit_75ohm 0x20020 | (1 << 20) // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 0,MA6 = 0,MA2 = 1 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 0,A9 = 0 ,A5 = 1 (CPU address)
+//#define CHB_OCD_Default_75ohm 0x21C20 | (1 << 20) // EMRS(1), BA0 = 1, MA9 = MA8 = MA7 = 1,MA6 = 0,MA2 = 1 (DRAM bus address)
+// A17 = 1, A12 = A11 = A10 = 1,A9 = 0 ,A5 = 1 (CPU address)
void InitDDR2CHB(
DRAM_SYS_ATTR *DramAttr
)
@@ -568,27 +568,27 @@ void InitDDR2CHB(
// step3.
//disable bank paging and multi page
- Data=pci_read_config8(MEMCTRL, 0x69);
+ Data = pci_read_config8(MEMCTRL, 0x69);
Data &= ~0x03;
pci_write_config8(MEMCTRL, 0x69, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step 4. Initialize CHB begin
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data |= 0x40;
pci_write_config8(MEMCTRL, 0xd3, Data);
//Step 5. NOP command enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x08;
pci_write_config8(MEMCTRL, 0xd7, Data);
//Step 6. issue a nop cycle,RegD3[7] 0 -> 1
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
@@ -603,25 +603,25 @@ void InitDDR2CHB(
// Step 8.
// all banks precharge command enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x10;
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 9. issue a precharge all cycle,RegD3[7] 0 -> 1
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step10. EMRS enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x18;
pci_write_config8(MEMCTRL, 0xd7, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xC7;
Data |= 0x08;
pci_write_config8(MEMCTRL, 0xd3, Data);
@@ -634,25 +634,25 @@ void InitDDR2CHB(
Data = (u8)((AccessAddr & 0xff00) >> 8);
pci_write_config8(MEMCTRL, 0xda, Data);
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xF9;
Data |= (u8)((AccessAddr & 0x30000) >> 15);
pci_write_config8(MEMCTRL, 0xd7, Data);
//step12. issue EMRS cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step13. MSR enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x18;
pci_write_config8(MEMCTRL, 0xd7, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xC7;
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xd3, Data);
@@ -665,13 +665,13 @@ void InitDDR2CHB(
Data = (u8)((AccessAddr & 0xff00) >> 8);
pci_write_config8(MEMCTRL, 0xda, Data);
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xF9;
Data |= (u8)((AccessAddr & 0x30000) >> 15);
pci_write_config8(MEMCTRL, 0xd7, Data);
//step15. issue MRS cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
@@ -682,21 +682,21 @@ void InitDDR2CHB(
pci_write_config8(MEMCTRL, 0xda, Data);
//step16. all banks precharge command enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x10;
pci_write_config8(MEMCTRL, 0xd7, Data);
// step17. issue precharge all cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step18. CBR cycle enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x20;
pci_write_config8(MEMCTRL, 0xd7, Data);
@@ -706,7 +706,7 @@ void InitDDR2CHB(
for (Idx = 0; Idx < 8; Idx++)
{
// issue CBR cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
@@ -716,12 +716,12 @@ void InitDDR2CHB(
}
//step22. MSR enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x18;
pci_write_config8(MEMCTRL, 0xd7, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xC7;
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xd3, Data);
@@ -730,11 +730,11 @@ void InitDDR2CHB(
//the SDRAM parameters.(Burst Length, CAS# Latency , Write recovery etc.)
//-------------------------------------------------------------
//Burst Length : really offset Rx6c[1]
- Data=pci_read_config8(MEMCTRL, 0x6C);
+ Data = pci_read_config8(MEMCTRL, 0x6C);
BL = (Data & 0x02) >> 1;
// CL = really offset RX62[2:0]
- Data=pci_read_config8(MEMCTRL, 0x62);
+ Data = pci_read_config8(MEMCTRL, 0x62);
CL = Data & 0x03;
AccessAddr = (u32)(CHB_DDR2_MRS_table[CL]);
@@ -744,7 +744,7 @@ void InitDDR2CHB(
}
//Write recovery : really offset Rx63[7:5]
- Data=pci_read_config8(MEMCTRL, 0x63);
+ Data = pci_read_config8(MEMCTRL, 0x63);
Twr = (Data & 0xE0) >> 5;
AccessAddr += CHB_DDR2_Twr_table[Twr];
@@ -758,25 +758,25 @@ void InitDDR2CHB(
Data = (u8)((AccessAddr & 0xFF00) >> 8);
pci_write_config8(MEMCTRL, 0xda, Data);
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xF9;
Data |= (u8)(((AccessAddr & 0x30000)>>16) << 1);
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 24. issue MRS cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step 25. EMRS enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x18;
pci_write_config8(MEMCTRL, 0xd7, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xC7;
Data |= 0x08;
pci_write_config8(MEMCTRL, 0xd3, Data);
@@ -790,25 +790,25 @@ void InitDDR2CHB(
Data = (u8)((AccessAddr & 0xff00) >> 8);
pci_write_config8(MEMCTRL, 0xda, Data);
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xF9;
Data |= (u8)((AccessAddr & 0x30000) >> 15);
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 27. issue EMRS cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step 25. EMRS enable
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x18;
pci_write_config8(MEMCTRL, 0xd7, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xC7;
Data |= 0x08;
pci_write_config8(MEMCTRL, 0xd3, Data);
@@ -821,13 +821,13 @@ void InitDDR2CHB(
Data = (u8)((AccessAddr & 0xff00) >> 8);
pci_write_config8(MEMCTRL, 0xda, Data);
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xF9;
Data |= (u8)((AccessAddr & 0x30000) >> 15);
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 29. issue EMRS cycle
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
pci_write_config8(MEMCTRL, 0xd3, Data);
Data |= 0x80;
@@ -840,29 +840,29 @@ void InitDDR2CHB(
Data = 0x00;
pci_write_config8(MEMCTRL, 0xda, Data);
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xF9;
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 30. normal SDRAM Mode
- Data=pci_read_config8(MEMCTRL, 0xd7);
+ Data = pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xd7, Data);
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xC7;
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step 31. exit the initialization mode
- Data=pci_read_config8(MEMCTRL, 0xd3);
+ Data = pci_read_config8(MEMCTRL, 0xd3);
Data &= 0xBF;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step 32. Enable bank paging and multi page
- Data=pci_read_config8(MEMCTRL, 0x69);
+ Data = pci_read_config8(MEMCTRL, 0x69);
Data |= 0x03;
pci_write_config8(MEMCTRL, 0x69, Data);
}
@@ -878,7 +878,7 @@ Output : Void
Purpose : Initialize DDR2 of CHC by standard sequence
Reference :
===================================================================*/
-// DDR2 CL=2 CL=3 CL=4 CL=5 (Burst type=interleave)(WR fine tune in code)
+// DDR2 CL = 2 CL = 3 CL = 4 CL = 5 (Burst type = interleave)(WR fine tune in code)
static const u16 CHC_MRS_table[4] = { 0x22B, 0x23B, 0x24B, 0x25B }; // Use 1X-bandwidth MA table to init DRAM
void InitDDR2CHC(DRAM_SYS_ATTR *DramAttr)
diff --git a/src/northbridge/via/vx800/dram_init.h b/src/northbridge/via/vx800/dram_init.h
index 6fa18779d4..e4e143aa0c 100644
--- a/src/northbridge/via/vx800/dram_init.h
+++ b/src/northbridge/via/vx800/dram_init.h
@@ -75,7 +75,7 @@
#define SPD_SDRAM_COL_ADDR 4 /*Number of column addresses on this assembly */
#define SPD_SDRAM_DIMM_RANKS 5 /*Number of RANKS on this assembly */
#define SPD_SDRAM_MOD_DATA_WIDTH 6 /*Data width of this assembly */
-#define SPD_SDRAM_TCLK_X 9 /*Cycle time at Maximum supported CAS latency (CL=X) */
+#define SPD_SDRAM_TCLK_X 9 /*Cycle time at Maximum supported CAS latency (CL = X) */
#define SPD_SDRAM_TAC_X 10 /*Access time for highest CL */
#define SPD_SDRAM_CONFIG_TYPE 11 /*Non-parity , Parity or ECC */
#define SPD_SDRAM_REFRESH 12 /*Refresh rate/type */
diff --git a/src/northbridge/via/vx800/drdy_bl.c b/src/northbridge/via/vx800/drdy_bl.c
index 634b8a8830..b9466b9813 100644
--- a/src/northbridge/via/vx800/drdy_bl.c
+++ b/src/northbridge/via/vx800/drdy_bl.c
@@ -42,14 +42,14 @@
// a.RDRPH(MD input internal timing control)
// b.CAS Latency
// RDELAYMD(1bit) = bit0 of (CL + RDRPH)
-// for example: RDRPH=10b, CL3 -> F3_Rx56[5:4]=11b, 10b + 11b = 101b, RDELAYMD=1 (bit0)
-// RDRPH=00b, CL2.5 -> F3_Rx56[5:4]=10b, 00b + 10b = 010b, RDELAYMD=0 (bit0)
+// for example: RDRPH = 10b, CL3 -> F3_Rx56[5:4]=11b, 10b + 11b = 101b, RDELAYMD = 1 (bit0)
+// RDRPH = 00b, CL2.5 -> F3_Rx56[5:4]=10b, 00b + 10b = 010b, RDELAYMD = 0 (bit0)
// 2. CPU Frequency
// 3. DRAM Frequency
//
// According to above conditions, we create different tables:
-// 1. RDELAYMD=0 : for integer CAS latency(ex. CL=3)
-// 2. RDELAYMD=1 : for non-integer CAS latency(ex. CL=2.5)
+// 1. RDELAYMD = 0 : for integer CAS latency(ex. CL = 3)
+// 2. RDELAYMD = 1 : for non-integer CAS latency(ex. CL = 2.5)
// 3. Normal performance
// 4. Top performance :
// Using phase0 to a case has better performance.
@@ -439,7 +439,7 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
Data |= 0x08;
pci_write_config8(PCI_DEV(0, 0, 2), 0x54, Data);
- //Data=pci_read_config8(PCI_DEV(0,0,2), 0x55);
+ //Data = pci_read_config8(PCI_DEV(0,0,2), 0x55);
//Data = Data & (~0x20);
//pci_write_config8(PCI_DEV(0,0,2), 0x55, Data);
@@ -538,17 +538,17 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
/*This routine process the ability for North Bridge side burst functionality
There are 3 variances that are valid:
- 1. DIMM BL=8, chipset BL=8
- 2. DIMM BL=4, chipset BL=4
- 3. DIMM BL=4, chipset BL=8 (only happened on Dual channel)
+ 1. DIMM BL = 8, chipset BL = 8
+ 2. DIMM BL = 4, chipset BL = 4
+ 3. DIMM BL = 4, chipset BL = 8 (only happened on Dual channel)
Device 0 function 2 HOST:REG54[4] must be 1 when 128-bit mode.
Since DIMM will be initialized in each rank individually,
- 1.If all DIMM BL=4, DIMM will initialize BL=4 first,
+ 1.If all DIMM BL = 4, DIMM will initialize BL = 4 first,
then check dual_channel flag to enable VIA_NB2HOST_REG54[4].
- 2.If all DIMM BL=8, DIMM will initialize BL=8 first,
- then check dual_channel flag for re-initialize DIMM BL=4.
+ 2.If all DIMM BL = 8, DIMM will initialize BL = 8 first,
+ then check dual_channel flag for re-initialize DIMM BL = 4.
also VIA_NB2HOST_REG54[4] need to be enabled.
-Chipset_BL8==>chipset side can set burst length=8
+Chipset_BL8==>chipset side can set burst length = 8
two register need to set
1. Device 0 function 2 HOST:REG54[4]
2. Device 0 function 3 DRAM:REG6C[3]
@@ -557,7 +557,7 @@ void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr)
{
u8 Data, BL;
u8 Sockets;
- /*SPD byte16 bit3,2 describes the burst length supported. bit3=1 support BL=8 bit2=1 support BL=4 */
+ /*SPD byte16 bit3,2 describes the burst length supported. bit3 = 1 support BL = 8 bit2 = 1 support BL = 4 */
BL = 0x0c;
for (Sockets = 0; Sockets < 2; Sockets++) {
if (DramAttr->DimmInfo[Sockets].bPresence) {
@@ -568,9 +568,9 @@ void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr)
}
}
- /*D0F3Rx6c bit3 CHA SDRAM effective burst length, for 64bit mode ranks =0 BL=4 ; =1 BL=8 */
+ /*D0F3Rx6c bit3 CHA SDRAM effective burst length, for 64bit mode ranks =0 BL = 4 ; =1 BL = 8 */
- if (BL & 0x08) /*All Assembly support BL=8 */
+ if (BL & 0x08) /*All Assembly support BL = 8 */
BL = 0x8; /*set bit3 */
else
BL = 0x00; /*clear bit3 */
@@ -582,7 +582,7 @@ void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr)
if (DramAttr->RankNumChB > 0) {
BL = DramAttr->DimmInfo[2].SPDDataBuf[SPD_SDRAM_BURSTLENGTH];
//Rx6c[1], CHB burst length
- if (BL & 0x08) /*CHB support BL=8 */
+ if (BL & 0x08) /*CHB support BL = 8 */
BL = 0x2; /*set bit1 */
else
BL = 0x00; /*clear bit1 */
diff --git a/src/northbridge/via/vx800/freq_setting.c b/src/northbridge/via/vx800/freq_setting.c
index dc2e1bd62a..6e11704e28 100644
--- a/src/northbridge/via/vx800/freq_setting.c
+++ b/src/northbridge/via/vx800/freq_setting.c
@@ -196,13 +196,13 @@ void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr)
}
/* cycle time value
- 0x25-->2.5ns Freq=400 DDR800
- 0x30-->3.0ns Freq=333 DDR667
- 0x3D-->3.75ns Freq=266 DDR533
- 0x50-->5.0ns Freq=200 DDR400
- 0x60-->6.0ns Freq=166 DDR333
- 0x75-->7.5ns Freq=133 DDR266
- 0xA0-->10.0ns Freq=100 DDR200
+ 0x25-->2.5ns Freq = 400 DDR800
+ 0x30-->3.0ns Freq = 333 DDR667
+ 0x3D-->3.75ns Freq = 266 DDR533
+ 0x50-->5.0ns Freq = 200 DDR400
+ 0x60-->6.0ns Freq = 166 DDR333
+ 0x75-->7.5ns Freq = 133 DDR266
+ 0xA0-->10.0ns Freq = 100 DDR200
*/
if (CycTime <= 0x25) {
DramAttr->DramFreq = DIMMFREQ_800;
diff --git a/src/northbridge/via/vx800/lpc.c b/src/northbridge/via/vx800/lpc.c
index 00c199971c..427979646c 100644
--- a/src/northbridge/via/vx800/lpc.c
+++ b/src/northbridge/via/vx800/lpc.c
@@ -87,7 +87,7 @@ static void pci_routing_fixup(struct device *dev)
/* Standard usb components */
printk(BIOS_INFO, "setting usb1-2\n");
-// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins));
+// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins));
/* sound hardware */
printk(BIOS_INFO, "setting hdac audio\n");
@@ -108,8 +108,8 @@ static void setup_pm(device_t dev)
/* set ACPI irq to 9 */
pci_write_config8(dev, 0x82, 0x49);
- /* Primary interupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */
-// pci_write_config16(dev, 0x84, 0x30f2);
+ /* Primary interupt channel, define wake events 0 = IRQ0 15 = IRQ15 1 = en. */
+// pci_write_config16(dev, 0x84, 0x30f2);
pci_write_config16(dev, 0x84, 0x609a); // 0x609a??
/* SMI output level to low, 7.5us throttle clock */
@@ -234,7 +234,7 @@ static void vx800_sb_init(struct device *dev)
pci_write_config8(dev, 0x6C, enables);
// Map 4MB of FLASH into the address space
-// pci_write_config8(dev, 0x41, 0x7f);
+// pci_write_config8(dev, 0x41, 0x7f);
// Set bit 6 of 0x40, because Award does it (IO recovery time)
// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
@@ -337,13 +337,13 @@ static void southbridge_init(struct device *dev)
fadt->pm2_cnt_len = 1;//to support cpu-c3
#2
ssdt? ->every CPU has a P_BLK address. set it to 0x10 (so that "Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state"---VIA vx800 P SPEC )
- #3 write 0x17 in to PMIO=VX800_ACPI_IO_BASE + 0x26, following the describtion in the P-spec.
- 1 enable SLP# asserts in C3 state PMIORx26<1> =1
- 2 enable CPUSTP# asserts in C3 state; PMIORx26<2> =1
- 3 CLKRUN# is always asserted PMIORx26<3> =0
- 4 Disable PCISTP# When CLKRUN# is asserted
+ #3 write 0x17 in to PMIO = VX800_ACPI_IO_BASE + 0x26, following the describtion in the P-spec.
+ 1 enable SLP# asserts in C3 state PMIORx26<1> = 1
+ 2 enable CPUSTP# asserts in C3 state; PMIORx26<2> = 1
+ 3 CLKRUN# is always asserted PMIORx26<3> = 0
+ 4 Disable PCISTP# When CLKRUN# is asserted
1: PCISTP# will not assert When CLKRUN# is asserted
- PMIORx26<4> =1
+ PMIORx26<4> = 1
5 This bit controls whether the CPU voltage is lowered when in C3/S1 state.
VRDSLP will be active in either this bit set in C3 or LVL4 register read
PMIORx26<0> =0
diff --git a/src/northbridge/via/vx800/uma_ram_setting.c b/src/northbridge/via/vx800/uma_ram_setting.c
index 6cfb1b9eaf..bf5909316a 100644
--- a/src/northbridge/via/vx800/uma_ram_setting.c
+++ b/src/northbridge/via/vx800/uma_ram_setting.c
@@ -141,7 +141,7 @@ void SetUMARam(void)
pci_write_config8(vga_dev, 0xb2, ByteVal);
//set M1 size
- //ByteVal=pci_read_config8(MEMCTRL, 0xa3);
+ //ByteVal = pci_read_config8(MEMCTRL, 0xa3);
//ByteVal = 0x02;
//pci_write_config8(MEMCTRL, 0xa3, ByteVal);
@@ -216,7 +216,7 @@ void SetUMARam(void)
ByteVal = inb(0x03CC);
ByteVal |= 0x03;
outb(ByteVal, 0x03C2);
- // ByteVal=inb(0x03C2);
+ // ByteVal = inb(0x03C2);
// ByteVal |= 0x01;
// outb(ByteVal,0x03C2);
@@ -318,7 +318,7 @@ void SetUMARam(void)
outb(0x22, 0x03c5);
//start : For enable snapshot mode control
- // program 3C5 for SNAPSHOT Mode control, set RxF3h=1Ah
+ // program 3C5 for SNAPSHOT Mode control, set RxF3h = 1Ah
outb(0xf3, 0x03c4);
ByteVal = inb(0x03c5);
ByteVal = (ByteVal & 0xE5) | 0x1A;
@@ -393,7 +393,7 @@ void SetUMARam(void)
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
};
- //for (i=0;i<0xc0;i++)
+ //for (i = 0;i < 0xc0;i++)
for (i = 0; i < 0x40; i++)
{
outb(table3c0space[i], 0x03c0 + i);
diff --git a/src/northbridge/via/vx800/vga.c b/src/northbridge/via/vx800/vga.c
index 61d4563dab..664e91583a 100644
--- a/src/northbridge/via/vx800/vga.c
+++ b/src/northbridge/via/vx800/vga.c
@@ -48,13 +48,13 @@
static int via_vx800_int15_handler(void)
{
- int res=0;
+ int res = 0;
printk(BIOS_DEBUG, "via_vx800_int15_handler\n");
switch(X86_EAX & 0xffff) {
case 0x5f19:
- X86_EAX=0x5f;
- X86_ECX=0x03;
- res=1;
+ X86_EAX = 0x5f;
+ X86_ECX = 0x03;
+ res = 1;
break;
case 0x5f18:
{
@@ -104,11 +104,11 @@ static int via_vx800_int15_handler(void)
res = 1;
break;
case 0x5f02:
- X86_EAX=0x5f;
- X86_EBX= (X86_EBX & 0xffff0000) | 2;
- X86_ECX= (X86_ECX & 0xffff0000) | 0x401; // PAL + crt only
- X86_EDX= (X86_EDX & 0xffff0000) | 0; // TV Layout - default
- res=1;
+ X86_EAX = 0x5f;
+ X86_EBX = (X86_EBX & 0xffff0000) | 2;
+ X86_ECX = (X86_ECX & 0xffff0000) | 0x401; // PAL + crt only
+ X86_EDX = (X86_EDX & 0xffff0000) | 0; // TV Layout - default
+ res = 1;
break;
case 0x5f0f:
X86_EAX = 0x005f;