summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorJonathan McDowell <noodles@earth.li>2005-09-14 16:18:30 +0000
committerJonathan McDowell <noodles@earth.li>2005-09-14 16:18:30 +0000
commit708743379ae6798a2c5c2087bb860d2d4b54b6b6 (patch)
tree6a294818c9a83047d2fe72e9f78aac703c103740 /src
parent85793c2b3fbf20e3a844b69c919783a79763de31 (diff)
downloadcoreboot-708743379ae6798a2c5c2087bb860d2d4b54b6b6.tar.xz
Clean up vt8235_early_smbus a bit.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2038 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/southbridge/via/vt8235/vt8235_early_smbus.c42
1 files changed, 12 insertions, 30 deletions
diff --git a/src/southbridge/via/vt8235/vt8235_early_smbus.c b/src/southbridge/via/vt8235/vt8235_early_smbus.c
index 26beea933b..8030f2f3df 100644
--- a/src/southbridge/via/vt8235/vt8235_early_smbus.c
+++ b/src/southbridge/via/vt8235/vt8235_early_smbus.c
@@ -30,31 +30,24 @@ static void enable_smbus(void)
device_t dev;
unsigned char c;
int i;
+
/* Power management controller */
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), 0);
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_8235), 0);
if (dev == PCI_DEV_INVALID) {
die("SMBUS controller not found\r\n");
}
- pci_write_config8(dev, 0xd2, (0x4 << 1 ));
// set IO base address to SMBUS_IO_BASE
- pci_write_config16(dev, 0xd0, SMBUS_IO_BASE);
+ pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1);
// Enable SMBus
- pci_write_config8(dev, 0xd2, (0x4 << 1)|1);
+ pci_write_config8(dev, 0xd2, (0x4 << 1) | 1);
- // Enable RTC
- pci_write_config8(dev,0x51,0x04);
-
/* make it work for I/O ...
*/
pci_write_config16(dev, 4, 1);
-
-
- /* tell the world we're alive - make power led flash during bios execution */
- pci_write_config8(dev,0x94,0xb2);
-
/* FIX for half baud rate problem */
/* let clocks and the like settle */
@@ -62,28 +55,17 @@ static void enable_smbus(void)
for(i = 0 ; i < 5000 ; i++)
outb(0x80,0x80);
- /* southbridge doesn't seem to like to do much untill after this delay, so set up
- * the flashing power LED again */
- pci_write_config8(dev,0x94,0xb2);
-
-/* The VT1211 serial port needs 48 mhz clock, on power up it is getting
- only 24 mhz, there is some mysterious device on the smbus that can
- fix this...this code below does it. */
+ /*
+ * The VT1211 serial port needs 48 mhz clock, on power up it is getting
+ * only 24 mhz, there is some mysterious device on the smbus that can
+ * fix this...this code below does it.
+ * */
outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
- outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
- outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
- outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
- for( ;;) {
- c = inb(SMBUS_IO_BASE+SMBHSTSTAT);
- if ((c & 1) == 0)
- break;
- }
outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0);
outb(0x83, SMBUS_IO_BASE+SMBHSTCMD);
- outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD);
- outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL);
+ outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD);
+ outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL);
-
for (;;) {
c = inb(SMBUS_IO_BASE+SMBHSTSTAT);
if ((c & 1) == 0)