soc/intel/common/block/pcr: Add function for executing PCH SBI message

This function performs SBI communication

Input:
 * PID: Port ID of the SBI message
 * Offset: Register offset of the SBI message
 * Opcode: Opcode
 * Posted: Posted message
 * Fast_Byte_Enable: First Byte Enable
 * BAR: base address
 * FID: Function ID
 * Data: Read/Write Data
 * Response: Response

Output:
 * 0: SBI message is successfully completed
 * -1: SBI message failure

Change-Id: I4e49311564e20cedbfabaaceaf5f72c480e5ea26
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/23809
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

2 files changed, 250 insertions, 0 deletions

diff --git a/src/soc/intel/common/block/include/intelblocks/pcr.h b/src/soc/intel/common/block/include/intelblocks/pcr.h
index cfe0015f70..c3af2fddc3 100644
--- a/src/soc/intel/common/block/include/intelblocks/pcr.h
+++ b/src/soc/intel/common/block/include/intelblocks/pcr.h
@@ -38,6 +38,47 @@ void pcr_or32(uint8_t pid, uint16_t offset, uint32_t ordata);
 void pcr_or16(uint8_t pid, uint16_t offset, uint16_t ordata);
 void pcr_or8(uint8_t pid, uint16_t offset, uint8_t ordata);
 
+/* SBI command */
+enum {
+	MEM_READ = 0,
+	MEM_WRITE = 1,
+	PCI_CONFIG_READ = 4,
+	PCI_CONFIG_WRITE = 5,
+	PCR_READ = 6,
+	PCR_WRITE = 7,
+	GPIO_LOCK_UNLOCK = 13,
+};
+
+struct pcr_sbi_msg {
+	uint8_t pid; /* 0x00 - Port ID of the SBI message */
+	uint32_t offset; /* 0x01 - Register offset of the SBI message */
+	uint8_t opcode; /* 0x05 - Opcode */
+	bool is_posted; /* 0x06 - Posted message */
+	uint16_t fast_byte_enable; /* 0x07 - First Byte Enable */
+	uint16_t bar; /* 0x09 - base address */
+	uint16_t fid; /* 0x0B - Function ID */
+};
+
+
+/*
+ * API to perform sideband communication
+ *
+ * Input:
+ * struct pcr_sbi_msg
+ * data - read/write for sbi message
+ * response -
+ * 0 - successful
+ * 1 - unsuccessful
+ * 2 - powered down
+ * 3 - multi-cast mixed
+ *
+ * Output:
+ * 0: SBI message is successfully completed
+ * -1: SBI message failure
+ */
+int pcr_execute_sideband_msg(struct pcr_sbi_msg *msg, uint32_t *data,
+		uint8_t *response);
+
 /* Get the starting address of the port's registers. */
 void *pcr_reg_address(uint8_t pid, uint16_t offset);
 #endif /* if !defined(__ACPI__) */
diff --git a/src/soc/intel/common/block/pcr/pcr.c b/src/soc/intel/common/block/pcr/pcr.c
index e106c4193f..cf487c5589 100644
--- a/src/soc/intel/common/block/pcr/pcr.c
+++ b/src/soc/intel/common/block/pcr/pcr.c
@@ -15,13 +15,53 @@
 
 #include <arch/io.h>
 #include <assert.h>
+#include <console/console.h>
 #include <intelblocks/pcr.h>
+#include <soc/pci_devs.h>
 #include <soc/pcr_ids.h>
+#include <timer.h>
 
 #if !defined(CONFIG_PCR_BASE_ADDRESS) || (CONFIG_PCR_BASE_ADDRESS == 0)
 #error "PCR_BASE_ADDRESS need to be non-zero!"
 #endif
 
+#if !IS_ENABLED(CONFIG_PCR_COMMON_IOSF_1_0)
+
+#define PCR_SBI_CMD_TIMEOUT	10 /* 10ms */
+
+/* P2SB PCI configuration register */
+#define P2SB_CR_SBI_ADDR	0xd0
+#define  P2SB_CR_SBI_DESTID	24
+#define P2SB_CR_SBI_DATA	0xd4
+#define P2SB_CR_SBI_STATUS	0xd8
+/* Bit 15:8 */
+#define  P2SB_CR_SBI_OPCODE	8
+#define  P2SB_CR_SBI_OPCODE_MASK	0xFF00
+/* Bit 7 */
+#define  P2SB_CR_SBI_POSTED	7
+#define  P2SB_CR_SBI_POSTED_MASK	0x0080
+/* Bit 2-1 */
+#define  P2SB_CR_SBI_STATUS_MASK	0x0006
+#define  P2SB_CR_SBI_STATUS_SUCCESS	0
+#define  P2SB_CR_SBI_STATUS_NOT_SUPPORTED	1
+#define  P2SB_CR_SBI_STATUS_POWERED_DOWN	2
+#define  P2SB_CR_SBI_STATUS_MULTI_CAST_MIXED	3
+/* Bit 0 */
+#define  P2SB_CR_SBI_STATUS_READY	0
+#define  P2SB_CR_SBI_STATUS_BUSY	1
+#define P2SB_CR_SBI_ROUTE_IDEN	0xda
+/* Bit 15-12 */
+#define  P2SB_CR_SBI_FBE	12
+#define  P2SB_CR_SBI_FBE_MASK	0xF
+/* Bit 10-8 */
+#define  P2SB_CR_SBI_BAR	8
+#define  P2SB_CR_SBI_MASK	0x7
+/* Bit 7-0 */
+#define  P2SB_CR_SBI_FID	0
+#define  P2SB_CR_SBI_FID_MASK	0xFF
+#define P2SB_CR_SBI_EXT_ADDR	0xdc
+#endif
+
 static void *__pcr_reg_address(uint8_t pid, uint16_t offset)
 {
 	uintptr_t reg_addr;
@@ -178,3 +218,172 @@ void pcr_or8(uint8_t pid, uint16_t offset, uint8_t ordata)
 	data8 |= ordata;
 	pcr_write8(pid, offset, data8);
 }
+
+#if !IS_ENABLED(CONFIG_PCR_COMMON_IOSF_1_0)
+
+static int pcr_wait_for_completion(device_t dev)
+{
+	struct stopwatch sw;
+
+	stopwatch_init_msecs_expire(&sw, PCR_SBI_CMD_TIMEOUT);
+	do {
+		if ((pci_read_config16(dev, P2SB_CR_SBI_STATUS) &
+			P2SB_CR_SBI_STATUS_BUSY) == 0)
+			return 0;
+	} while (!stopwatch_expired(&sw));
+
+	return -1;
+}
+
+/*
+ * API to perform sideband communication
+ *
+ * Input:
+ * struct pcr_sbi_msg
+ * data - read/write for sbi message
+ * response -
+ * 0 - successful
+ * 1 - unsuccessful
+ * 2 - powered down
+ * 3 - multi-cast mixed
+ *
+ * Output:
+ * 0: SBI message is successfully completed
+ * -1: SBI message failure
+ */
+int pcr_execute_sideband_msg(struct pcr_sbi_msg *msg, uint32_t *data,
+		uint8_t *response)
+{
+	device_t dev = PCH_DEV_P2SB;
+	uint32_t sbi_data;
+	uint16_t sbi_status;
+	uint16_t sbi_rid;
+
+	assert(msg && data && response);
+
+	switch (msg->opcode) {
+		case MEM_READ:
+		case MEM_WRITE:
+		case PCI_CONFIG_READ:
+		case PCI_CONFIG_WRITE:
+		case PCR_READ:
+		case PCR_WRITE:
+		case GPIO_LOCK_UNLOCK:
+			break;
+		default:
+			printk(BIOS_ERR, "SBI Failure: Wrong Input!\n");
+			return -1;
+			break;
+	}
+
+	if (pci_read_config16(dev, PCI_VENDOR_ID) == 0xffff) {
+		printk(BIOS_ERR, "SBI Failure: P2SB device Hidden!\n");
+		return -1;
+	}
+
+	/*
+	 * BWG Section 2.2.1
+	 * 1. Poll P2SB PCI offset D8h[0] = 0b
+	 * Make sure the previous operation is completed.
+	 */
+	if (pcr_wait_for_completion(dev)) {
+		printk(BIOS_ERR, "SBI Failure: Time Out!\n");
+		return -1;
+	}
+
+	/* Initial Response status */
+	*response = P2SB_CR_SBI_STATUS_NOT_SUPPORTED;
+
+	/*
+	 * 2. Write P2SB PCI offset D0h[31:0] with Address
+	 * and Destination Port ID
+	 */
+	pci_write_config32(dev, P2SB_CR_SBI_ADDR,
+		(msg->pid << P2SB_CR_SBI_DESTID) | msg->offset);
+
+	/*
+	 * 3. Write P2SB PCI offset DCh[31:0] with extended address,
+	 * which is expected to be 0
+	 */
+	pci_write_config32(dev, P2SB_CR_SBI_EXT_ADDR, msg->offset >> 16);
+
+	/*
+	 * 4. Set P2SB PCI offset D8h[15:8] = 00000110b for read
+	 *    Set P2SB PCI offset D8h[15:8] = 00000111b for write
+	 *
+	 * Set SBISTAT[15:8] to the opcode passed in
+	 * Set SBISTAT[7] to the posted passed in
+	 */
+	sbi_status = pci_read_config16(dev, P2SB_CR_SBI_STATUS);
+	sbi_status &= ~(P2SB_CR_SBI_OPCODE_MASK | P2SB_CR_SBI_POSTED_MASK);
+	sbi_status |= (msg->opcode << P2SB_CR_SBI_OPCODE) |
+				(msg->is_posted << P2SB_CR_SBI_POSTED);
+	pci_write_config16(dev, P2SB_CR_SBI_STATUS, sbi_status);
+
+	/*
+	 * 5. Write P2SB PCI offset DAh[15:0] = F000h
+	 *
+	 * Set RID[15:0] = Fbe << 12 | Bar << 8 | Fid
+	 */
+	sbi_rid = ((msg->fast_byte_enable & P2SB_CR_SBI_FBE_MASK)
+					<< P2SB_CR_SBI_FBE) |
+			((msg->bar & P2SB_CR_SBI_MASK) << P2SB_CR_SBI_BAR) |
+			(msg->fid & P2SB_CR_SBI_FID_MASK);
+	pci_write_config16(dev, P2SB_CR_SBI_ROUTE_IDEN, sbi_rid);
+
+	switch (msg->opcode) {
+		case MEM_WRITE:
+		case PCI_CONFIG_WRITE:
+		case PCR_WRITE:
+			/*
+			 * 6. Write P2SB PCI offset D4h[31:0] with the
+			 * intended data accordingly
+			 */
+			sbi_data = *data;
+			pci_write_config32(dev, P2SB_CR_SBI_DATA, sbi_data);
+			break;
+		default:
+			/* 6. Write P2SB PCI offset D4h[31:0] with dummy data */
+			pci_write_config32(dev, P2SB_CR_SBI_DATA, 0);
+			break;
+	}
+
+	/*
+	 * 7. Set P2SB PCI offset D8h[0] = 1b, Poll P2SB PCI offset D8h[0] = 0b
+	 *
+	 * Set SBISTAT[0] = 1b, trigger the SBI operation
+	 */
+	sbi_status = pci_read_config16(dev, P2SB_CR_SBI_STATUS);
+	sbi_status |= P2SB_CR_SBI_STATUS_BUSY;
+	pci_write_config16(dev, P2SB_CR_SBI_STATUS, sbi_status);
+
+	/* Poll SBISTAT[0] = 0b, Polling for Busy bit */
+	if (pcr_wait_for_completion(dev)) {
+		printk(BIOS_ERR, "SBI Failure: Time Out!\n");
+		return -1;
+	}
+
+	/*
+	 * 8. Check if P2SB PCI offset D8h[2:1] = 00b for
+	 * successful transaction
+	 */
+	*response = (sbi_status & P2SB_CR_SBI_STATUS_MASK) >> 1;
+	if (*response == P2SB_CR_SBI_STATUS_SUCCESS) {
+		switch (msg->opcode) {
+		case MEM_READ:
+		case PCI_CONFIG_READ:
+		case PCR_READ:
+			sbi_data = pci_read_config32(dev, P2SB_CR_SBI_DATA);
+			*data = sbi_data;
+			break;
+		default:
+			break;
+		}
+		return 0;
+	} else {
+		printk(BIOS_ERR, "SBI Failure: Transaction Status = %x\n",
+				*response);
+		return -1;
+	}
+}
+#endif