summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorShelley Chen <shchen@chromium.org>2017-06-09 12:56:08 -0700
committerMartin Roth <martinroth@google.com>2017-06-20 03:16:34 +0200
commitdb287aad2547d6bc4a710c8a511448b5ff5ebead (patch)
tree48719a2e3479be1e70f86aa1cbe7cb39c60a068d /src
parent1b5eda02332db0182b282a2afc960d6899c0b31a (diff)
downloadcoreboot-db287aad2547d6bc4a710c8a511448b5ff5ebead.tar.xz
google/fizz: Enable cr50 over i2c
BUG=b:62456589, b:35775024 BRANCH=None TEST=Reboot and ensure verstage doesn't have any TPM errors CQ-DEPEND=CL:530185 Change-Id: Icfde0f62bd058d960fcb0c6fc67f9d8f6b9462f5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20133 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/google/fizz/Kconfig22
-rw-r--r--src/mainboard/google/fizz/devicetree.cb14
-rw-r--r--src/mainboard/google/fizz/gpio.h21
-rw-r--r--src/mainboard/google/fizz/mainboard.c10
4 files changed, 60 insertions, 7 deletions
diff --git a/src/mainboard/google/fizz/Kconfig b/src/mainboard/google/fizz/Kconfig
index 2d2e6b78c0..da6e67465b 100644
--- a/src/mainboard/google/fizz/Kconfig
+++ b/src/mainboard/google/fizz/Kconfig
@@ -13,12 +13,21 @@ config BOARD_SPECIFIC_OPTIONS
select MAINBOARD_USES_FSP2_0
select NO_FADT_8042
select SOC_INTEL_KABYLAKE
+ select FIZZ_USE_I2C_TPM
select GENERIC_SPD_BIN
config VBOOT
select EC_GOOGLE_CHROMEEC_SWITCHES
select GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC
+config DRIVER_TPM_I2C_BUS
+ depends on FIZZ_USE_I2C_TPM
+ default 0x1
+
+config DRIVER_TPM_I2C_ADDR
+ depends on FIZZ_USE_I2C_TPM
+ default 0x50
+
config GBB_HWID
string
depends on CHROMEOS
@@ -47,4 +56,17 @@ config DIMM_MAX
config DIMM_SPD_SIZE
int
default 512
+
+# Select this option to enable use of cr50 I2C TPM on fizz.
+config FIZZ_USE_I2C_TPM
+ bool
+ default n
+ select I2C_TPM
+ select MAINBOARD_HAS_I2C_TPM_CR50
+ select TPM2
+
+config TPM_TIS_ACPI_INTERRUPT
+ int
+ default 64 # GPE0_DW2_00 (GPP_E0)
+
endif
diff --git a/src/mainboard/google/fizz/devicetree.cb b/src/mainboard/google/fizz/devicetree.cb
index ff2ec7f86d..abd5452f21 100644
--- a/src/mainboard/google/fizz/devicetree.cb
+++ b/src/mainboard/google/fizz/devicetree.cb
@@ -181,6 +181,12 @@ chip soc/intel/skylake
register "i2c_voltage[2]" = "I2C_VOLTAGE_3V3" # Debug
register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" # Audio
+ # Configure I2C1 for cr50 TPM. Early init is required to set up a BAR
+ # for TPM communication before memory is up.
+ register "i2c[1]" = "{
+ .early_init = 1,
+ }"
+
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
@@ -214,7 +220,13 @@ chip soc/intel/skylake
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
end # I2C #0
- device pci 15.1 on end # I2C #1
+ device pci 15.1 on
+ chip drivers/i2c/tpm
+ register "hid" = ""GOOG0005""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
+ device i2c 50 on end
+ end
+ end # I2C #1
device pci 15.2 on end # I2C #2
device pci 15.3 off
end # I2C #3
diff --git a/src/mainboard/google/fizz/gpio.h b/src/mainboard/google/fizz/gpio.h
index ced33e97b0..9f7da49ed4 100644
--- a/src/mainboard/google/fizz/gpio.h
+++ b/src/mainboard/google/fizz/gpio.h
@@ -108,8 +108,15 @@ static const struct pad_config gpio_table[] = {
/* UART1_CTS# */ PAD_CFG_GPI(GPP_C15, NONE, DEEP), /* SKU_ID3 */
/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
-/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
-/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
+#if IS_ENABLED(CONFIG_FIZZ_USE_I2C_TPM)
+/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP,
+ NF1), /* PCH_I2C1_H1_3V3_SDA */
+/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP,
+ NF1), /* PCH_I2C1_H1_3V3_SCL */
+#else
+/* I2C1_SDA */ PAD_CFG_NC(GPP_C18),
+/* I2C1_SCL */ PAD_CFG_NC(GPP_C19),
+#endif
/* UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* SERVO */
/* UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* SERVO */
/* UART2_RTS# */ PAD_CFG_NC(GPP_C22), /* TP309 */
@@ -231,10 +238,12 @@ static const struct pad_config gpio_table[] = {
/* Early pad configuration in bootblock */
static const struct pad_config early_gpio_table[] = {
-/* I2C2_SDA */ PAD_CFG_NF(GPP_F4, NONE, DEEP,
- NF1), /* PCH_I2C2_H1_3V3_SDA */
-/* I2C2_SCL */ PAD_CFG_NF(GPP_F5, NONE, DEEP,
- NF1), /* PCH_I2C2_H1_3V3_SCL */
+#if IS_ENABLED(CONFIG_FIZZ_USE_I2C_TPM)
+/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP,
+ NF1), /* PCH_I2C1_H1_3V3_SDA */
+/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP,
+ NF1), /* PCH_I2C1_H1_3V3_SCL */
+#endif
/* SATAXPCI0 */ PAD_CFG_GPI_APIC_INVERT(GPP_E0, NONE,
PLTRST), /* H1_PCH_INT_ODL */
/* Ensure UART pins are in native mode for H1. */
diff --git a/src/mainboard/google/fizz/mainboard.c b/src/mainboard/google/fizz/mainboard.c
index d515d29c43..5346276d35 100644
--- a/src/mainboard/google/fizz/mainboard.c
+++ b/src/mainboard/google/fizz/mainboard.c
@@ -17,6 +17,7 @@
#include <console/console.h>
#include <device/device.h>
#include <ec/ec.h>
+#include <soc/pci_devs.h>
#include <vendorcode/google/chromeos/chromeos.h>
static void mainboard_init(device_t dev)
@@ -26,8 +27,17 @@ static void mainboard_init(device_t dev)
static void mainboard_enable(device_t dev)
{
+ device_t tpm;
+
dev->ops->init = mainboard_init;
dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator;
+
+ /* Disable unused interface for TPM. */
+ if (!IS_ENABLED(CONFIG_FIZZ_USE_I2C_TPM)) {
+ tpm = PCH_DEV_I2C1;
+ if (tpm)
+ tpm->enabled = 0;
+ }
}
struct chip_operations mainboard_ops = {