summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorAlexandru Gagniuc <mr.nuke.me@gmail.com>2013-12-31 00:57:30 -0500
committerAlexandru Gagniuc <mr.nuke.me@gmail.com>2014-01-09 01:12:56 +0100
commit5d8b0a9fb31ff5d595aab08165ce686dd1a65dfc (patch)
tree4ffabd476b127f396b68866469bf52427f2f15d0 /src
parent391622ae30d36ff6a666892d2da7eba67120a400 (diff)
downloadcoreboot-5d8b0a9fb31ff5d595aab08165ce686dd1a65dfc.tar.xz
cubieboard: Initialize memory in bootblock
Even though the Allwinner A10 is limited to a 24KiB bootblock, the memory initialization takes only about 3KiB and leaves enough room for an MMC or NAND driver, so init the memory early on. The advantage is that we can eliminate complicated logistics of where to cache CBFS and where to load the ramstage in SRAM. Change-Id: Id549552ed509434e831db60deaef28e04d62417f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4630 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
Diffstat (limited to 'src')
-rw-r--r--src/cpu/allwinner/a10/Makefile.inc2
-rw-r--r--src/mainboard/cubietech/cubieboard/bootblock.c42
2 files changed, 44 insertions, 0 deletions
diff --git a/src/cpu/allwinner/a10/Makefile.inc b/src/cpu/allwinner/a10/Makefile.inc
index 8e743a2d42..3e7b5355aa 100644
--- a/src/cpu/allwinner/a10/Makefile.inc
+++ b/src/cpu/allwinner/a10/Makefile.inc
@@ -1,6 +1,8 @@
bootblock-y += clock.c
+bootblock-y += raminit.c
bootblock-y += gpio.c
bootblock-y += pinmux.c
+bootblock-y += timer.c
bootblock-y += bootblock_media.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart_console.c
diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c
index 8899160d45..2e5929c019 100644
--- a/src/mainboard/cubietech/cubieboard/bootblock.c
+++ b/src/mainboard/cubietech/cubieboard/bootblock.c
@@ -9,8 +9,10 @@
#include <arch/io.h>
#include <uart.h>
#include <console/console.h>
+#include <delay.h>
#include <cpu/allwinner/a10/gpio.h>
#include <cpu/allwinner/a10/clock.h>
+#include <cpu/allwinner/a10/dramc.h>
#define CPU_AHB_APB0_DEFAULT \
CPU_CLK_SRC_OSC24M \
@@ -76,10 +78,50 @@ static void cubieboard_enable_uart(void)
a1x_periph_clock_enable(A1X_CLKEN_UART0);
}
+static void cubieboard_raminit(void)
+{
+ struct dram_para dram_para = {
+ .clock = 480,
+ .type = 3,
+ .rank_num = 1,
+ .density = 4096,
+ .io_width = 16,
+ .bus_width = 32,
+ .cas = 6,
+ .zq = 123,
+ .odt_en = 0,
+ .size = 1024,
+ .tpr0 = 0x30926692,
+ .tpr1 = 0x1090,
+ .tpr2 = 0x1a0c8,
+ .tpr3 = 0,
+ .tpr4 = 0,
+ .tpr5 = 0,
+ .emr1 = 0,
+ .emr2 = 0,
+ .emr3 = 0,
+ };
+
+ dramc_init(&dram_para);
+
+ /* FIXME: ram_check does not compile for ARM,
+ * and we didn't init console yet
+ */
+ ////void *const test_base = (void *)A1X_DRAM_BASE;
+ ////ram_check((u32)test_base, (u32)test_base + 0x1000);
+}
+
void bootblock_mainboard_init(void);
void bootblock_mainboard_init(void)
{
+ /* A10 Timer init uses the 24MHz clock, not PLLs, so we can init it very
+ * early on to get udelay, which is used almost everywhere else.
+ */
+ init_timer();
+
cubieboard_setup_clocks();
cubieboard_setup_gpios();
cubieboard_enable_uart();
+
+ cubieboard_raminit();
}