diff options
author | Stefan Reinauer <reinauer@chromium.org> | 2013-12-03 12:13:26 -0800 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2013-12-05 20:13:08 +0100 |
commit | ab365af0a05e391d1e20e39e8bfb61c023b0a678 (patch) | |
tree | cf9400d95ea9ba7f8412751cdd398ca5d3ff1017 /src | |
parent | c0254e6b6fbe7268fa47b2d4bd0a203423b2eec2 (diff) | |
download | coreboot-ab365af0a05e391d1e20e39e8bfb61c023b0a678.tar.xz |
lynxpoint: implement additional programming steps
The BIOS spec for LynxPoint calls out additional
programming steps for the PCIe Root Ports. Implement those
steps from the BIOS spec. These steps are completed before
deeper PCIe probing. The "late" programming was removed as
that was applicable to Cougar/Panther point where this
code was originally copied, though there was some overlap.
Change-Id: I64f25e4451e035d98ca6b66b0335bd280b70b074
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59558
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4323
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src')
-rw-r--r-- | src/southbridge/intel/lynxpoint/pcie.c | 352 |
1 files changed, 201 insertions, 151 deletions
diff --git a/src/southbridge/intel/lynxpoint/pcie.c b/src/southbridge/intel/lynxpoint/pcie.c index 98dfe6170e..c4cde920ed 100644 --- a/src/southbridge/intel/lynxpoint/pcie.c +++ b/src/southbridge/intel/lynxpoint/pcie.c @@ -38,6 +38,9 @@ struct root_port_config { u32 strpfusecfg1; u32 strpfusecfg2; u32 strpfusecfg3; + u32 b0d28f0_32c; + u32 b0d28f4_32c; + u32 b0d28f5_32c; int coalesce; int gbe_port; int num_ports; @@ -132,11 +135,14 @@ static void root_port_init_config(device_t dev) switch (rp) { case 1: rpc.strpfusecfg1 = pci_read_config32(dev, 0xfc); + rpc.b0d28f0_32c = pci_read_config32(dev, 0x32c); break; case 5: rpc.strpfusecfg2 = pci_read_config32(dev, 0xfc); + rpc.b0d28f4_32c = pci_read_config32(dev, 0x32c); break; case 6: + rpc.b0d28f5_32c = pci_read_config32(dev, 0x32c); rpc.strpfusecfg3 = pci_read_config32(dev, 0xfc); break; default: @@ -365,161 +371,211 @@ static void root_port_check_disable(device_t dev) } } -static void pch_pcie_pm_early(struct device *dev) +static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or) { -/* RPC has been moved. It is in PCI config space now. */ -#if 0 - u16 link_width_p0, link_width_p4; - u8 slot_power_limit = 10; /* 10W for x1 */ - u32 reg32; u8 reg8; - reg32 = RCBA32(RPC); - - /* Port 0-3 link aggregation from PCIEPCS1[1:0] soft strap */ - switch (reg32 & 3) { - case 3: - link_width_p0 = 4; - break; - case 1: - case 2: - link_width_p0 = 2; - break; - case 0: - default: - link_width_p0 = 1; - } + reg8 = pci_read_config8(dev, reg); + reg8 &= mask; + reg8 |= or; + pci_write_config8(dev, reg, reg8); +} - /* Port 4-7 link aggregation from PCIEPCS2[1:0] soft strap */ - switch ((reg32 >> 2) & 3) { - case 3: - link_width_p4 = 4; - break; - case 1: - case 2: - link_width_p4 = 2; - break; - case 0: - default: - link_width_p4 = 1; - } +static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or) +{ + u32 reg32; - /* Enable dynamic clock gating where needed */ - reg8 = pci_read_config8(dev, 0xe1); - switch (PCI_FUNC(dev->path.pci.devfn)) { - case 0: /* Port 0 */ - if (link_width_p0 == 4) - slot_power_limit = 40; /* 40W for x4 */ - else if (link_width_p0 == 2) - slot_power_limit = 20; /* 20W for x2 */ - reg8 |= 0x3f; - break; - case 4: /* Port 4 */ - if (link_width_p4 == 4) - slot_power_limit = 40; /* 40W for x4 */ - else if (link_width_p4 == 2) - slot_power_limit = 20; /* 20W for x2 */ - reg8 |= 0x3f; - break; - case 1: /* Port 1 only if Port 0 is x1 */ - if (link_width_p0 == 1) - reg8 |= 0x3; - break; - case 2: /* Port 2 only if Port 0 is x1 or x2 */ - case 3: /* Port 3 only if Port 0 is x1 or x2 */ - if (link_width_p0 <= 2) - reg8 |= 0x3; - break; - case 5: /* Port 5 only if Port 4 is x1 */ - if (link_width_p4 == 1) - reg8 |= 0x3; - break; - case 6: /* Port 7 only if Port 4 is x1 or x2 */ - case 7: /* Port 7 only if Port 4 is x1 or x2 */ - if (link_width_p4 <= 2) - reg8 |= 0x3; - break; - } - pci_write_config8(dev, 0xe1, reg8); - - /* Set 0xE8[0] = 1 */ - reg32 = pci_read_config32(dev, 0xe8); - reg32 |= 1; - pci_write_config32(dev, 0xe8, reg32); - - /* Adjust Common Clock exit latency */ - reg32 = pci_read_config32(dev, 0xd8); - reg32 &= ~(1 << 17); - reg32 |= (1 << 16) | (1 << 15); - reg32 &= ~(1 << 31); /* Disable PME# SCI for native PME handling */ - pci_write_config32(dev, 0xd8, reg32); - - /* Adjust ASPM L1 exit latency */ - reg32 = pci_read_config32(dev, 0x4c); - reg32 &= ~((1 << 17) | (1 << 16) | (1 << 15)); - if (RCBA32(0x2320) & (1 << 16)) { - /* If RCBA+2320[15]=1 set ASPM L1 to 8-16us */ - reg32 |= (1 << 17); - } else { - /* Else set ASPM L1 to 2-4us */ - reg32 |= (1 << 16); - } - pci_write_config32(dev, 0x4c, reg32); - - /* Set slot power limit as configured above */ - reg32 = pci_read_config32(dev, 0x54); - reg32 &= ~((1 << 15) | (1 << 16)); /* 16:15 = Slot power scale */ - reg32 &= ~(0xff << 7); /* 14:7 = Slot power limit */ - reg32 |= (slot_power_limit << 7); - pci_write_config32(dev, 0x54, reg32); -#endif + reg32 = pci_read_config32(dev, reg); + reg32 &= mask; + reg32 |= or; + pci_write_config32(dev, reg, reg32); } -static void pch_pcie_pm_late(struct device *dev) +static void pcie_add_0x0202000_iobp(u32 reg) { - enum aspm_type apmc; u32 reg32; - /* Set 0x314 = 0x743a361b */ - pci_write_config32(dev, 0x314, 0x743a361b); - - /* Set 0x318[31:16] = 0x1414 */ - reg32 = pci_read_config32(dev, 0x318); - reg32 &= 0x0000ffff; - reg32 |= 0x14140000; - pci_write_config32(dev, 0x318, reg32); - - /* Set 0x324[5] = 1 */ - reg32 = pci_read_config32(dev, 0x324); - reg32 |= (1 << 5); - pci_write_config32(dev, 0x324, reg32); - - /* Set 0x330[7:0] = 0x40 */ - reg32 = pci_read_config32(dev, 0x330); - reg32 &= ~(0xff); - reg32 |= 0x40; - pci_write_config32(dev, 0x330, reg32); - - /* Set 0x33C[24:0] = 0x854c74 */ - reg32 = pci_read_config32(dev, 0x33c); - reg32 &= 0xff000000; - reg32 |= 0x00854c74; - pci_write_config32(dev, 0x33c, reg32); - - /* No IO-APIC, Disable EOI forwarding */ - reg32 = pci_read_config32(dev, 0xd4); - reg32 |= (1 << 1); - pci_write_config32(dev, 0xd4, reg32); - - /* Get configured ASPM state */ - apmc = pci_read_config32(dev, 0x50) & 3; - - /* If both L0s and L1 enabled then set root port 0xE8[1]=1 */ - if (apmc == PCIE_ASPM_BOTH) { - reg32 = pci_read_config32(dev, 0xe8); - reg32 |= (1 << 1); - pci_write_config32(dev, 0xe8, reg32); + reg32 = pch_iobp_read(reg); + reg32 += (0x2 << 16) | (0x2 << 8); + pch_iobp_write(reg, reg32); +} + +static void pch_pcie_early(struct device *dev) +{ + int rp; + int do_aspm; + int is_lp; + + rp = root_port_number(dev); + do_aspm = 0; + is_lp = pch_is_lp(); + + if (is_lp) { + switch (rp) { + case 1: + case 2: + case 3: + case 4: + /* Bits 31:28 of b0d28f0 0x32c register correspnd to + * Root Ports 4:1. */ + do_aspm = !!(rpc.b0d28f0_32c & (1 << (28 + rp - 1))); + break; + case 5: + /* Bit 28 of b0d28f4 0x32c register correspnd to + * Root Ports 4:1. */ + do_aspm = !!(rpc.b0d28f4_32c & (1 << 28)); + break; + case 6: + /* Bit 28 of b0d28f5 0x32c register correspnd to + * Root Ports 4:1. */ + do_aspm = !!(rpc.b0d28f5_32c & (1 << 28)); + break; + } + } else { + switch (rp) { + case 1: + case 2: + case 3: + case 4: + /* Bits 31:28 of b0d28f0 0x32c register correspnd to + * Root Ports 4:1. */ + do_aspm = !!(rpc.b0d28f0_32c & (1 << (28 + rp - 1))); + break; + case 5: + case 6: + case 7: + case 8: + /* Bit 31:28 of b0d28f4 0x32c register correspnd to + * Root Ports 8:5. */ + do_aspm = !!(rpc.b0d28f4_32c & (1 << (28 + rp - 5))); + break; + } } + + if (do_aspm) { + /* Set ASPM bits in MPC2 register. */ + pcie_update_cfg(dev, 0xd4, ~(0x3 << 2), (1 << 4) | (0x2 << 2)); + + /* Set unique clock exit latency in MPC register. */ + pcie_update_cfg(dev, 0xd8, ~(0x7 << 18), (0x7 << 18)); + + /* Set L1 exit latency in LCAP register. */ + pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x4 << 15)); + + if (is_lp) { + switch (rp) { + case 1: + pcie_add_0x0202000_iobp(0xe9002440); + break; + case 2: + pcie_add_0x0202000_iobp(0xe9002640); + break; + case 3: + pcie_add_0x0202000_iobp(0xe9000840); + break; + case 4: + pcie_add_0x0202000_iobp(0xe9000a40); + break; + case 5: + pcie_add_0x0202000_iobp(0xe9000c40); + pcie_add_0x0202000_iobp(0xe9000e40); + pcie_add_0x0202000_iobp(0xe9001040); + pcie_add_0x0202000_iobp(0xe9001240); + break; + case 6: + /* Update IOBP based on lane ownership. */ + if (rpc.pin_ownership & (1 << 4)) + pcie_add_0x0202000_iobp(0xea002040); + if (rpc.pin_ownership & (1 << 5)) + pcie_add_0x0202000_iobp(0xea002240); + if (rpc.pin_ownership & (1 << 6)) + pcie_add_0x0202000_iobp(0xea002440); + if (rpc.pin_ownership & (1 << 7)) + pcie_add_0x0202000_iobp(0xea002640); + break; + } + } else { + switch (rp) { + case 1: + if ((rpc.pin_ownership & 0x3) == 1) + pcie_add_0x0202000_iobp(0xe9002e40); + else + pcie_add_0x0202000_iobp(0xea002040); + break; + case 2: + if ((rpc.pin_ownership & 0xc) == 0x4) + pcie_add_0x0202000_iobp(0xe9002c40); + else + pcie_add_0x0202000_iobp(0xea002240); + break; + case 3: + pcie_add_0x0202000_iobp(0xe9002a40); + break; + case 4: + pcie_add_0x0202000_iobp(0xe9002840); + break; + case 5: + pcie_add_0x0202000_iobp(0xe9002640); + break; + case 6: + pcie_add_0x0202000_iobp(0xe9002440); + break; + case 7: + pcie_add_0x0202000_iobp(0xe9002240); + break; + case 8: + pcie_add_0x0202000_iobp(0xe9002040); + break; + } + } + + pcie_update_cfg(dev, 0x338, ~(1 << 26), 0); + } + + /* Enable LTR in Root Port. */ + pcie_update_cfg(dev, 0x64, ~(1 << 11), (1 << 11)); + pcie_update_cfg(dev, 0x68, ~(1 << 10), (1 << 10)); + + pcie_update_cfg(dev, 0x318, ~(0xffff << 16), (0x1414 << 16)); + + /* Set L1 exit latency in LCAP register. */ + if (!do_aspm && (pci_read_config8(dev, 0xf5) & 0x1)) + pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x4 << 15)); + else + pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x2 << 15)); + + pcie_update_cfg(dev, 0x314, 0x0, 0x743a361b); + + /* Set Common Clock Exit Latency in MPC register. */ + pcie_update_cfg(dev, 0xd8, ~(0x7 << 15), (0x3 << 15)); + + pcie_update_cfg(dev, 0x33c, ~0x00ffffff, 0x854c74); + + /* Set undocumented bits in MPC2 register. */ + pcie_update_cfg(dev, 0xd4, ~0, (1 << 12) | (1 << 6)); + + /* Set Invalid Recieve Range Check Enable in MPC register. */ + pcie_update_cfg(dev, 0xd8, ~0, (1 << 25)); + + pcie_update_cfg8(dev, 0xf5, 0x3f, 0); + + if (rp == 1 || rp == 5 || (is_lp && rp == 6)) + pcie_update_cfg8(dev, 0xf7, ~0xc, 0); + + /* Set EOI forwarding disable. */ + pcie_update_cfg(dev, 0xd4, ~0, (1 << 1)); + + /* Set something involving advanced error reporting. */ + pcie_update_cfg(dev, 0x100, ~((1 << 20) - 1), 0x10001); + + if (is_lp) + pcie_update_cfg(dev, 0x100, ~0, (1 << 29)); + + /* Read and write back write-once capability registers. */ + pcie_update_cfg(dev, 0x34, ~0, 0); + pcie_update_cfg(dev, 0x40, ~0, 0); + pcie_update_cfg(dev, 0x80, ~0, 0); + pcie_update_cfg(dev, 0x90, ~0, 0); } static void pci_init(struct device *dev) @@ -562,15 +618,9 @@ static void pci_init(struct device *dev) /* Clear errors in status registers */ reg16 = pci_read_config16(dev, 0x06); - //reg16 |= 0xf900; pci_write_config16(dev, 0x06, reg16); - reg16 = pci_read_config16(dev, 0x1e); - //reg16 |= 0xf900; pci_write_config16(dev, 0x1e, reg16); - - /* Power Management init after enumeration */ - pch_pcie_pm_late(dev); } static void pch_pcie_enable(device_t dev) @@ -583,7 +633,7 @@ static void pch_pcie_enable(device_t dev) /* Power Management init before enumeration */ if (dev->enabled) - pch_pcie_pm_early(dev); + pch_pcie_early(dev); /* * When processing the last PCIe root port we can now |