diff options
author | Ronald G. Minnich <rminnich@gmail.com> | 2006-07-21 19:21:38 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2006-07-21 19:21:38 +0000 |
commit | da7ee9fa07b4eaebd6e16faa678d814d9ba03ef1 (patch) | |
tree | c86847785bdcd547d0121314f6021c4dc5482f26 /src | |
parent | 35befb75ead1b4bc34ef351bec2a411a3ee70519 (diff) | |
download | coreboot-da7ee9fa07b4eaebd6e16faa678d814d9ba03ef1.tar.xz |
These changes incorporate steve goodrich'es fixes, and one bug that is
disabled.
cs5536: add new entires for SB control etc.
cs5536.c: chip_enabled function moved to chip_init, so it only gets run
once.
IRQ setup improved
gx2def.h: new defines added
vr.h: new file, with new def's for virtual register control.
mainboard config.lb: new entries added for nb and sb control.
chipsetinit.c: new controls added -- I forget all the details :-)
grphinit.c: new function added
northbridge.c: new IRQ control added. FlashChipSetup added, controlled
by chip info setupflash struct member. Currently, if enabled, this hangs
OLPC in linux PCI scan.
chip.h: new struct members added for unwanted device enable, flash setup
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r-- | src/include/cpu/amd/gx2def.h | 30 | ||||
-rw-r--r-- | src/include/cpu/amd/vr.h | 486 | ||||
-rw-r--r-- | src/mainboard/olpc/rev_a/Config.lb | 6 | ||||
-rw-r--r-- | src/northbridge/amd/gx2/chip.h | 3 | ||||
-rw-r--r-- | src/northbridge/amd/gx2/chipsetinit.c | 90 | ||||
-rw-r--r-- | src/northbridge/amd/gx2/grphinit.c | 24 | ||||
-rw-r--r-- | src/northbridge/amd/gx2/northbridge.c | 65 | ||||
-rw-r--r-- | src/southbridge/amd/cs5536/chip.h | 4 | ||||
-rw-r--r-- | src/southbridge/amd/cs5536/cs5536.c | 67 |
9 files changed, 709 insertions, 66 deletions
diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h index fd466afe48..8e64659120 100644 --- a/src/include/cpu/amd/gx2def.h +++ b/src/include/cpu/amd/gx2def.h @@ -1097,4 +1097,34 @@ #define PM_AWKD ( PMLogic_BASE + 0x50) #define PM_SSC ( PMLogic_BASE + 0x54) + +/* FLASH device macros */ +#define FLASH_TYPE_NONE 0 /* No flash device installed */ +#define FLASH_TYPE_NAND 1 /* NAND device */ +#define FLASH_TYPE_NOR 2 /* NOR device */ + +#define FLASH_IF_MEM 1 /* Memory or memory-mapped I/O interface for Flash device */ +#define FLASH_IF_IO 2 /* I/O interface for Flash device */ + +/* Flash Memory Mask values */ +#define FLASH_MEM_DEFAULT 0x00000000 +#define FLASH_MEM_4K 0xFFFFF000 +#define FLASH_MEM_8K 0xFFFFE000 +#define FLASH_MEM_16K 0xFFFFC000 +#define FLASH_MEM_128K 0xFFFE0000 +#define FLASH_MEM_512K 0xFFFC0000 +#define FLASH_MEM_4M 0xFFC00000 +#define FLASH_MEM_8M 0xFF800000 +#define FLASH_MEM_16M 0xFF000000 + +/* Flash IO Mask values */ +#define FLASH_IO_DEFAULT 0x00000000 +#define FLASH_IO_16B 0x0000FFF0 +#define FLASH_IO_32B 0x0000FFE0 +#define FLASH_IO_64B 0x0000FFC0 +#define FLASH_IO_128B 0x0000FF80 +#define FLASH_IO_256B 0x0000FF00 + + + #endif /* CPU_AMD_GX2DEF_H */ diff --git a/src/include/cpu/amd/vr.h b/src/include/cpu/amd/vr.h new file mode 100644 index 0000000000..0626545336 --- /dev/null +++ b/src/include/cpu/amd/vr.h @@ -0,0 +1,486 @@ +/* <LIC_AMD_STD> + * Copyright (C) 2003-2005 Advanced Micro Devices, Inc. All Rights Reserved. + * </LIC_AMD_STD> */ +//<CTL_AMD_STD> +//$Id: //bios/main/vsa_ii/inc/vr.h#18 $ +//$Header: //bios/main/vsa_ii/inc/vr.h#18 $ +//$Date: 2005/09/29 $ +//$DateTime: 2005/09/29 11:07:14 $ +//$Change: 65425 $ +//$File: //bios/main/vsa_ii/inc/vr.h $ +//$Revision: #18 $ +//$Author: johnk $ +//</CTL_AMD_STD> +//<DOC_AMD_STD> +// Virtual Register USAGE: +// +// Index: AH = Class, AL = Parameter_ID +// Data: AX = data +//</DOC_AMD_STD> + +#define VRC_INDEX 0xAC1C // Index register +#define VRC_DATA 0xAC1E // Data register +#define VR_UNLOCK 0xFC53 // Virtual register unlock code +#define NO_VR -1 // No virtual registers + +#define VRC_MISCELLANEOUS 0x00 // Miscellaneous Class + #define VSA_VERSION_NUM 0x00 + #define HIGH_MEM_ACCESS 0x01 + #define GET_VSM_INFO 0x02 // Used by INFO + #define GET_BASICS 0x00 + #define GET_EVENT 0x01 + #define GET_STATISTICS 0x02 + #define GET_HISTORY 0x03 + #define GET_HARDWARE 0x04 + #define GET_ERROR 0x05 + #define SET_VSM_TYPE 0x06 + #define SIGNATURE 0x03 + #define VSA2_SIGNATURE 0x56534132 // 'VSA2' returned in EAX + + #define GET_HW_INFO 0x04 + #define VSM_VERSION 0x05 + #define CTRL_ALT_DEL 0x06 + #define MSR_ACCESS 0x07 + #define GET_DESCR_INFO 0x08 + #define PCI_INT_AB 0x09 // GPIO pins for INTA# and INTB# + #define PCI_INT_CD 0x0A // GPIO pins for INTC# and INTD# + #define WATCHDOG 0x0B // Watchdog timer + + #define MAX_MISC WATCHDOG + + +// NOTE: Do not change the order of the following registers: +#define VRC_AUDIO 0x01 // XpressAudio Class + #define AUDIO_VERSION 0x00 + #define PM_STATE 0x01 + #define SB_16_IO_BASE 0x02 + #define MIDI_BASE 0x03 + #define CPU_USAGE 0x04 + #define CODEC_TYPE 0x05 + #define STATE_INDEX 0x06 + #define STATE_DATA 0x07 + #define AUDIO_IRQ 0x08 // For use by native audio drivers + #define STATUS_PTR 0x09 // For use by native audio drivers + #define MAX_AUDIO STATUS_PTR + +#define VRC_VG 0x02 // SoftVG Class +#define VRC_VGA 0x02 // SoftVGA Class + #define VG_MEM_SIZE 0x00 // bits 7:0 - 512K unit size, bit 8 controller priority + #define VG_CONFIG 0x00 // Main configuration register + #define VG_CFG_BYPASS 0x0001 // DOTPLL bypass bit + #define VG_MEM_MASK 0x00FE // Memory size mask bits, 2MB increment + #define VG_CFG_DSMASK 0x0700 // Active display mask bits + #define VG_CFG_DSCRT 0x0000 // Active display is CRT + #define VG_CFG_DSPAN 0x0100 // Active display is panel + #define VG_CFG_DSTV 0x0200 // Active display is TV + #define VG_CFG_DSSIM 0x0400 // Simultaneous CRT + #define VG_CFG_PRIORITY 0x0800 // Controller priority bit + #define VG_CFG_MONO 0x1000 // External monochrome card support bit + #define VG_CFG_DRIVER 0x2000 // Driver active bit + #define VG_CRTC_DIAG 0x8000 // Enable CRTC emulation + + // Defined for GX3/GX3VG + #define VG_REFRESH 0x01 // Mode refresh, a mode switch without changing modes + #define VG_FRSH_REF_MASK 0xE000 // Refresh rate mask + #define VG_FRSH_REF_GO 0x1000 // Refresh rate GO bit + // Uses CFP_REF_xxx values from below + #define VG_FRSH_BPP_MASK 0x0E00 // Color depth mask + #define VG_FRSH_BPP_GO 0x0100 // Color depth GO bit + #define FRSH_BPP_8RGB 0x0200 // 8 bits per pixel, RGB + #define FRSH_BPP_16ARGB 0x0400 // 16BPP, ARGB (4:4:4:4) + #define FRSH_BPP_15RGB 0x0600 // 15BPP, RGB (1:5:5:5) + #define FRSH_BPP_16RGB 0x0800 // 16BPP, RGB (5:6:5) + #define FRSH_BPP_24RGB 0x0A00 // 24BPP, RGB (0:8:8:8) + #define FRSH_BPP_32ARGB 0x0C00 // 32BPP, ARGB (8:8:8:8) + #define VG_CFG_DPMS 0x00C0 // DPMS mask bits + #define VG_CFG_DPMS_H 0x0040 // HSYNC mask bit + #define VG_CFG_DPMS_V 0x0080 // VSYNC mask bit + #define VG_VESA_SV_RST 0x0020 // VESA Save/Restore state flag + #define VG_VESA_RST 0x0000 // VESA Restore state + #define VG_VESA_SV 0x0020 // VESA Save state + #define VG_FRSH_MODE 0x0002 // Mode refresh flag + #define VG_FRSH_TIMINGS 0x0001 // Timings only refresh flag + + // Defined for GX2/SoftVG + #define VG_PLL_REF 0x01 // PLL reference frequency selection register + #define PLL_14MHZ 0x0000 // 14.31818MHz PLL reference frequency (Default) + #define PLL_48MHZ 0x0100 // 48MHz PLL reference frequency + + // Defined for GX1/SoftVGA + #define VGA_MEM_SIZE 0x01 // bits 7:1 - 128K unit size, bit 0 controller enable + + #define VG_FP_TYPE 0x02 // Flat panel type data + // VG_FP_TYPE definitions for GX2/SoftVG + #define FP_TYPE_SSTN 0x0000 // SSTN panel type value + #define FP_TYPE_DSTN 0x0001 // DSTN panel type value + #define FP_TYPE_TFT 0x0002 // TFT panel type value + #define FP_TYPE_LVDS 0x0003 // LVDS panel type value + #define FP_RES_6X4 0x0000 // 640x480 resolution value + #define FP_RES_8X6 0x0008 // 800x600 resolution value + #define FP_RES_10X7 0x0010 // 1024x768 resolution value + #define FP_RES_11X8 0x0018 // 1152x864 resolution value + #define FP_RES_12X10 0x0020 // 1280x1024 resolution value + #define FP_RES_16X12 0x0028 // 1600x1200 resolution value + #define FP_WIDTH_8 0x0000 // 8 bit data bus width + #define FP_WIDTH_9 0x0040 // 9 bit data bus width + #define FP_WIDTH_12 0x0080 // 12 bit data bus width + #define FP_WIDTH_18 0x00C0 // 18 bit data bus width + #define FP_WIDTH_24 0x0100 // 24 bit data bus width + #define FP_WIDTH_16 0x0140 // 16 bit data bus width - 16 bit Mono DSTN only + #define FP_COLOR_COLOR 0x0000 // Color panel + #define FP_COLOR_MONO 0x0200 // Mono Panel + #define FP_PPC_1PPC 0x0000 // One pixel per clock + #define FP_PPC_2PPC 0x0400 // Two pixels per clock + #define FP_H_POL_LGH 0x0000 // HSync at panel, normally low, active high + #define FP_H_POL_HGL 0x0800 // HSync at panel, normally high, active low + #define FP_V_POL_LGH 0x0000 // VSync at panel, normally low, active high + #define FP_V_POL_HGL 0x1000 // VSync at panel, normally high, active low + #define FP_REF_60 0x0000 // 60Hz refresh rate + #define FP_REF_65 0x2000 // 65Hz refresh rate + #define FP_REF_70 0x4000 // 70Hz refresh rate + #define FP_REF_72 0x6000 // 72Hz refresh rate + #define FP_REF_75 0x8000 // 75Hz refresh rate + #define FP_REF_85 0xA000 // 85Hz refresh rate + + // VG_FP_TYPE definitions for GX3/GX3VG + #define FP_TYPE_TYPE 0x0003 // Flat panel type bits mask + #define CFP_TYPE_TFT 0x0000 // TFT panel type value + #define CFP_TYPE_LVDS 0x0001 // LVDS panel type value + #define FP_TYPE_RES 0x0038 // Panel resolution bits mask + #define CFP_RES_3X2 0x0000 // 320x240 resolution value + #define CFP_RES_6X4 0x0008 // 640x480 resolution value + #define CFP_RES_8X6 0x0010 // 800x600 resolution value + #define CFP_RES_10X7 0x0018 // 1024x768 resolution value + #define CFP_RES_11X8 0x0020 // 1152x864 resolution value + #define CFP_RES_12X10 0x0028 // 1280x1024 resolution value + #define CFP_RES_16X12 0x0030 // 1600x1200 resolution value + #define FP_TYPE_BUS 0x00C0 // Data bus width and pixels/clock mask + #define CFP_BUS_1PPC 0x0040 // 9, 12, 18 or 24 bit data bus, 1 pixel per clock + #define CFP_BUS_2PPC 0x0080 // 18 or 24 bit data bus, 2 pixels per clock + #define FP_TYPE_HPOL 0x0800 // HSYNC polarity into the panel + #define CFP_HPOL_HGL 0x0000 // HSync at panel, normally high, active low + #define CFP_HPOL_LGH 0x0800 // HSync at panel, normally low, active high + #define FP_TYPE_VPOL 0x1000 // VSYNC polarity into the panel + #define CFP_VPOL_HGL 0x0000 // VSync at panel, normally high, active low + #define CFP_VPOL_LGH 0x1000 // VSync at panel, normally low, active high + #define FP_TYPE_REF 0xE000 // Panel refresh rate + #define CFP_REF_60 0x0000 // 60Hz refresh rate + #define CFP_REF_70 0x2000 // 70Hz refresh rate + #define CFP_REF_75 0x4000 // 75Hz refresh rate + #define CFP_REF_85 0x6000 // 85Hz refresh rate + #define CFP_REF_100 0x8000 // 100Hz refresh rate + + #define VG_FP_OPTION 0x03 // Flat panel option data + #define FP_OPT_SCLK_NORMAL 0x0000 // SHFTClk not inverted to panel + #define FP_OPT_SCLK_INVERTED 0x0010 // SHFTClk inverted to panel + #define FP_OPT_SCLK_ACT_ACTIVE 0x0000 // SHFTClk active during "active" only + #define FP_OPT_SCLK_ACT_FREE 0x0020 // SHFTClk free-running + #define FP_OPT_LP_ACT_FREE 0x0000 // LP free-running + #define FP_OPT_LP_ACT_ACTIVE 0x0040 // LP active during "active" only + #define FP_OPT_LDE_POL_LGH 0x0000 // LDE/MOD, normally low, active high + #define FP_OPT_LDE_POL_HGL 0x0080 // LDE/MOD, normally high, active low + #define FP_OPT_PWR_DLY_32MS 0x0000 // 32MS delay for each step of pwr seq. + #define FP_OPT_PWR_DLY_128MS 0x0100 // 128MS delay for each step of pwr seq. + + #define VG_TV_CONFIG 0x04 // TV configuration register + #define VG_TV_ENC 0x000F // TV encoder select mask + #define VG_TV_ADV7171 0x0000 // ADV7171 Encoder + #define VG_TV_SAA7127 0x0001 // ADV7171 Encoder + #define VG_TV_ADV7300 0x0002 // ADV7300 Encoder + #define VG_TV_FS454 0x0003 // FS454 Encoder + #define VG_TV_FMT 0x0070 // TV encoder output format mask + #define VG_TV_FMT_SHIFT 0x0004 // Right shift value + #define VG_TV_NTSC 0x0000 // NTSC output format + #define VG_TV_PAL 0x0010 // PAL output format + #define VG_TV_HDTV 0x0020 // HDTV output format + + // The meaning of the VG_TV_RES field is dependent on the selected + // encoder and output format. The translations are: + // ADV7171 - Not Used + // SAA7127 - Not Used + // ADV7300 - HDTV resolutions only + // LO -> 720x480p + // MED -> 1280x720p + // HI -> 1920x1080i + // FS454 - Both SD and HD resolutions + // SD Resolutions - NTSC and PAL + // LO -> 640x480 + // MED -> 800x600 + // HI -> 1024x768 + // HD Resolutions + // LO -> 720x480p + // MED -> 1280x720p + // HI -> 1920x1080i + #define VG_TV_RES 0x0780 // TV resolution select mask + #define VG_TV_RES_SHIFT 0x0007 // Right shift value + #define VG_TV_RES_LO 0x0000 // Low resolution + #define VG_TV_RES_MED 0x0080 // Medium resolution + #define VG_TV_RES_HI 0x0100 // High resolution + #define VG_TV_PASSTHRU 0x0800 // TV passthru mode + + #define VG_TV_SCALE_ADJ 0x05 // Modifies scaling factors for TV resolutions + #define VG_TV_HACT_ADJ 0x00FF // Horizontal active scale adjust value mask + #define VG_TV_VACT_ADJ 0xFF00 // Vertical active scale adjust value mask + + #define VG_DEBUG 0x0F // A debug register + + #define VG_FT_HTOT 0x10 // Fixed timings, horizontal total + #define VG_FT_HACT 0x11 // Fixed timings, horizontal active + #define VG_FT_HBST 0x12 // Fixed timings, horizontal blank start + #define VG_FT_HBND 0x13 // Fixed timings, horizontal blank end + #define VG_FT_HSST 0x14 // Fixed timings, horizontal sync start + #define VG_FT_HSND 0x15 // Fixed timings, horizontal sync end + + #define VG_FT_VTOT 0x16 // Fixed timings, vertical total + #define VG_FT_VACT 0x17 // Fixed timings, vertical active + #define VG_FT_VBST 0x18 // Fixed timings, vertical blank start + #define VG_FT_VBND 0x19 // Fixed timings, vertical blank end + #define VG_FT_VSST 0x1A // Fixed timings, vertical sync start + #define VG_FT_VSND 0x1B // Fixed timings, vertical sync end + + #define VG_START_OFFS_LO 0x20 // Framebuffer start offset bits 15:0 + #define VG_START_OFFS_HI 0x21 // Framebuffer start offset bits 27:16 + + #define VG_FT_VEACT 0x28 // Fixed timings, vertical active + #define VG_FT_VETOT 0x29 // Fixed timings, vertical total + #define VG_FT_VEBST 0x2A // Fixed timings, vertical blank start + #define VG_FT_VEBND 0x2B // Fixed timings, vertical blank end + #define VG_FT_VESST 0x2C // Fixed timings, vertical sync start + #define VG_FT_VESND 0x2D // Fixed timings, vertical sync end + + #define MAX_VGA VGA_MEM_SIZE +// #define MAX_VG VG_FP_OPTION +// #define MAX_VG VG_START_OFFS_HI + #define MAX_VG VG_FT_VESND + +#define VRC_APM 0x03 + #define REPORT_EVENT 0x00 + #define CAPABILITIES 0x01 + #define APM_PRESENT 0x02 + #define MAX_APM APM_PRESENT + + +#define VRC_PM 0x04 // Legacy PM Class + #define POWER_MODE 0x00 + #define POWER_STATE 0x01 + #define DOZE_TIMEOUT 0x02 + #define STANDBY_TIMEOUT 0x03 + #define SUSPEND_TIMEOUT 0x04 + #define PS2_TIMEOUT 0x05 + #define RESUME_ON_RING 0x06 + #define VIDEO_TIMEOUT 0x07 + #define DISK_TIMEOUT 0x08 + #define FLOPPY_TIMEOUT 0x09 + #define SERIAL_TIMEOUT 0x0A + #define PARALLEL_TIMEOUT 0x0B + #define IRQ_WAKEUP_MASK 0x0C +// #define SUSPEND_MODULATION 0x0D + #define SLEEP_PIN 0x0E + #define SLEEP_PIN_ATTR 0x0F +// #define SMI_WAKEUP_MASK 0x10 + #define INACTIVITY_CONTROL 0x11 + #define PM_S1_CLOCKS 0x12 + #define S1_CLOCKS_ON 0x00 + #define S1_CLOCKS_OFF 0x01 +// #define PM_S2_CLOCKS 0x13 +// #define PM_S3_CLOCKS 0x14 +// #define PM_S4_CLOCKS 0x15 +// #define PM_S5_CLOCKS 0x16 + #define PM_S0_LED 0x17 + #define PM_S1_LED 0x18 + #define PM_S2_LED 0x19 + #define PM_S3_LED 0x1A + #define PM_S4_LED 0x1B + #define PM_S5_LED 0x1C + #define PM_LED_GPIO 0x1D + #define PM_IMM_LED 0x1E + #define PM_PWR_LEDS 0x1F + #define MB_LED0 0x01 + #define MB_LED1 0x02 + #define MB_LED2 0x04 + #define MB_LED3 0x08 + #define SIO_LED0 0x10 + #define SIO_LED1 0x20 + #define SIO_LED2 0x40 + #define SIO_LED3 0x80 + #define PM_PME_MASK 0x20 + #define MAX_PM PM_PME_MASK + + +#define VRC_INFRARED 0x05 + #define MAX_INFRARED NO_VR + +#define VRC_TV 0x06 // TV Encoder Class + #define TV_ENCODER_TYPE 0x00 + #define TV_CALLBACK_MASK 0x01 + #define TV_MODE 0x02 + #define TV_POSITION 0x03 + #define TV_BRIGHTNESS 0x04 + #define TV_CONTRAST 0x05 + #define TV_OUTPUT 0x06 + #define TV_TIMING 0x10 // 0x10...0x1D are all timings + #define MAX_TV TV_TIMING + + + +#define VRC_EXTERNAL_AMP 0x07 + #define EAPD_VERSION 0x00 + #define AMP_POWER 0x01 + #define AMP_OFF 0x00 + #define AMP_ON 0x01 + #define AMP_TYPE 0x02 + #define MAX_EXTERNAL_AMP AMP_TYPE + + +#define VRC_ACPI 0x08 + #define ENABLE_ACPI 0x00 // Enable ACPI Mode + #define SCI_IRQ 0x01 // Set the IRQ the SCI is mapped to, sysbios use. + #define ACPINVS_LO 0x02 // new calls to send 32bit physAddress of + #define ACPINVS_HI 0x03 // ACPI NVS region to VSA + #define GLOBAL_LOCK 0x04 // read requests semaphore, write clears + #define ACPI_UNUSED1 0x05 + #define RW_PIRQ 0x06 // read/write PCI IRQ router regs in SB Func0 cfg space + #define SLPB_CLEAR 0x07 // clear sleep button GPIO status's + #define PIRQ_ROUTING 0x08 // read the PCI IRQ routing based on BIOS setup + #define ACPI_UNUSED2 0x09 + #define ACPI_UNUSED3 0x0A + #define PIC_INTERRUPT 0x0B + #define ACPI_PRESENT 0x0C + #define ACPI_GEN_COMMAND 0x0D + #define ACPI_GEN_PARAM1 0x0E + #define ACPI_GEN_PARAM2 0x0F + #define ACPI_GEN_PARAM3 0x10 + #define ACPI_GEN_RETVAL 0x11 + #define MAX_ACPI ACPI_GEN_RETVAL + +#define VRC_ACPI_OEM 0x09 + #define MAX_ACPI_OEM NO_VR + +#define VRC_POWER 0x0A + #define BATTERY_UNITS 0x00 // No. battery units + #define BATTERY_SELECT 0x01 + #define AC_STATUS 0x02 + #define BATTERY_STATUS 0x03 + #define BATTERY_FLAG 0x04 + #define BATTERY_PERCENTAGE 0x05 + #define BATTERY_TIME 0x06 + #define MAX_POWER BATTERY_TIME + + + +#define VRC_OHCI 0x0B // OHCI Class + #define SET_LED 0x00 + #define INIT_OHCI 0x01 + #define MAX_OHCI INIT_OHCI + +#define VRC_KEYBOARD 0x0C // Kbd Controller Class + #define KEYBOARD_PRESENT 0x00 + #define SCANCODE 0x01 + #define MOUSE_PRESENT 0x02 + #define MOUSE_BUTTONS 0x03 + #define MOUSE_XY 0x04 + #define MAX_KEYBOARD MOUSE_XY + + +#define VRC_DDC 0x0D // Video DDC Class + #define VRC_DDC_ENABLE 0x00 // Enable/disable register + #define DDC_DISABLE 0x00 + #define DDC_ENABLE 0x01 + #define VRC_DDC_IO 0x01 // A non-zero value for safety + #define MAX_DDC VRC_DDC_IO + +#define VRC_DEBUGGER 0x0E + #define MAX_DEBUGGER NO_VR + + +#define VRC_STR 0x0F // Virtual Register class + #define RESTORE_ADDR 0x00 // Physical address of MSR restore table + + +#define VRC_COP8 0x10 // Virtual Register class + #define VRC_HIB_ENABLE 0x00 // HIB enable/disable index + #define HIB_ENABLE 0x00 // HIB enable command + #define HIB_DISABLE 0x01 // HIB disable command + #define VRC_HIB_SEND 0x01 // Send packet to COP8 + #define VRC_HIB_READUART 0x02 // Read byte from COP8 UART + #define VRC_HIB_VERSION 0x03 // Read COP8 version + #define VRC_HIB_SERIAL 0x04 // Read 8 byte serial number + #define VRC_HIB_USRBTN 0x05 // Read POST button pressed status + #define MAX_COP8 NO_VR + +#define VRC_OWL 0x11 // Virtual Register class + #define VRC_OWL_DAC 0x00 // DAC (Backlight) Control + #define VRC_OWL_GPIO 0x01 // GPIO Control + #define MAX_OWL VRC_OWL_GPIO + +#define VRC_SYSINFO 0x12 // Virtual Register class + #define VRC_SI_VERSION 0x00 // Sysinfo VSM version + #define VRC_SI_CPU_MHZ 0x01 // CPU speed in MHZ + #define VRC_SI_CHIPSET_BASE_LOW 0x02 + #define VRC_SI_CHIPSET_BASE_HI 0x03 + #define VRC_SI_CHIPSET_ID 0x04 + #define VRC_SI_CHIPSET_REV 0x05 + #define VRC_SI_CPU_ID 0x06 + #define VRC_SI_CPU_REV 0x07 + #define MAX_SYSINFO VRC_SI_CPU_REV + +#define VRC_SUPERIO 0x13 + #define VRC_SIO_CHIPID 0x00 + #define VRC_SIO_NUMLD 0x01 + #define VRC_SIO_FDCEN 0x02 + #define VRC_SIO_FDCIO 0x03 + #define VRC_SIO_FDCIRQ 0x04 + #define VRC_SIO_FDCDMA 0x05 + #define VRC_SIO_FDCCFG1 0x06 + #define VRC_SIO_FDCCFG2 0x07 + #define VRC_SIO_PP1EN 0x08 + #define VRC_SIO_PP1IO 0x09 + #define VRC_SIO_PP1IRQ 0x0A + #define VRC_SIO_PP1DMA 0x0B + #define VRC_SIO_PP1CFG1 0x0C + #define VRC_SIO_SP1EN 0x0D + #define VRC_SIO_SP1IO 0x0E + #define VRC_SIO_SP1IRQ 0x0F + #define VRC_SIO_SP1CFG1 0x10 + #define VRC_SIO_SP2EN 0x11 + #define VRC_SIO_SP2IO 0x12 + #define VRC_SIO_SP2IRQ 0x13 + #define VRC_SIO_SP2CFG1 0x14 + #define VRC_SIO_KBEN 0x15 + #define VRC_SIO_KBIO1 0x16 + #define VRC_SIO_KBIO2 0x17 + #define VRC_SIO_KBIRQ 0x18 + #define VRC_SIO_KBCFG1 0x19 + #define VRC_SIO_MSEN 0x1A + #define VRC_SIO_MSIO 0x1B + #define VRC_SIO_MSIRQ 0x1C + #define VRC_SIO_RTCEN 0x1D + #define VRC_SIO_RTCIO1 0x1E + #define VRC_SIO_RTCIO2 0x1F + #define VRC_SIO_RTCIRQ 0x20 + #define VRC_SIO_RTCCFG1 0x21 + #define VRC_SIO_RTCCFG2 0x22 + #define VRC_SIO_RTCCFG3 0x23 + #define VRC_SIO_RTCCFG4 0x24 + #define MAX_SUPERIO VRC_SIO_RTCCFG4 + +#define VRC_CHIPSET 0x14 + #define VRC_CS_PWRBTN 0x00 + #define VRC_CS_UART1 0x01 + #define VRC_CS_UART2 0x02 + #define MAX_CHIPSET VRC_CS_UART2 + +#define VRC_THERMAL 0x15 + #define VRC_THERMAL_CURR_RTEMP 0x00 // read only + #define VRC_THERMAL_CURR_LTEMP 0x01 // read only + #define VRC_THERMAL_FAN 0x02 + #define VRC_THERMAL_LOW_THRESHOLD 0x03 + #define VRC_THERMAL_HIGH_THRESHOLD 0x04 + #define VRC_THERMAL_INDEX 0x05 + #define VRC_THERMAL_DATA 0x06 + #define VRC_THERMAL_SMB_ADDRESS 0x07 + #define VRC_THERMAL_SMB_INDEX 0x08 + #define VRC_THERMAL_SMB_DATA 0x09 + #define MAX_THERMAL VRC_THERMAL_SMB_DATA + +#define MAX_VR_CLASS VRC_THERMAL diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb index db80ccd02a..0ab8e1e3ac 100644 --- a/src/mainboard/olpc/rev_a/Config.lb +++ b/src/mainboard/olpc/rev_a/Config.lb @@ -125,6 +125,7 @@ config chip.h chip northbridge/amd/gx2 register "irqmap" = "0xaa5b" + register "setupflash" = "0" device apic_cluster 0 on chip cpu/amd/model_gx2 device apic 0 on end @@ -147,7 +148,10 @@ chip northbridge/amd/gx2 device pci f.2 on end # IDE Controller device pci f.3 on end # Audio device pci f.4 on end # OHCI - device pci f.5 on end # UHCI + device pci f.5 on end # EHCI + register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC + register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG + register "unwanted_vpci[2]" = "0" # End of list has a zero end end end diff --git a/src/northbridge/amd/gx2/chip.h b/src/northbridge/amd/gx2/chip.h index 46e6ae87be..556c0e1de0 100644 --- a/src/northbridge/amd/gx2/chip.h +++ b/src/northbridge/amd/gx2/chip.h @@ -1,6 +1,7 @@ struct northbridge_amd_gx2_config { - uint16_t irqmap; + uint16_t irqmap; + int setupflash; }; extern struct chip_operations northbridge_amd_gx2_ops; diff --git a/src/northbridge/amd/gx2/chipsetinit.c b/src/northbridge/amd/gx2/chipsetinit.c index a149d626ef..3bd73f7c9c 100644 --- a/src/northbridge/amd/gx2/chipsetinit.c +++ b/src/northbridge/amd/gx2/chipsetinit.c @@ -163,7 +163,90 @@ pmChipsetInit(void) { } +struct FLASH_DEVICE { + unsigned char fType; /* Flash type: NOR or NAND */ + unsigned char fInterface; /* Flash interface: I/O or Memory */ + unsigned long fMask; /* Flash size/mask */ +}; + +struct FLASH_DEVICE FlashInitTable[] = { + { FLASH_TYPE_NAND, FLASH_IF_MEM, FLASH_MEM_4K }, /* CS0, or Flash Device 0 */ + { FLASH_TYPE_NONE, 0, 0 }, /* CS1, or Flash Device 1 */ + { FLASH_TYPE_NONE, 0, 0 }, /* CS2, or Flash Device 2 */ + { FLASH_TYPE_NONE, 0, 0 }, /* CS3, or Flash Device 3 */ +}; + +#define FlashInitTableLen (sizeof(FlashInitTable)/sizeof(FlashInitTable[0])) + +uint32_t FlashPort[] = { + MDD_LBAR_FLSH0, + MDD_LBAR_FLSH1, + MDD_LBAR_FLSH2, + MDD_LBAR_FLSH3 + }; + +/*************************************************************************** + * + * ChipsetFlashSetup + * + * Flash LBARs need to be setup before VSA init so the PCI BARs have + * correct size info. Call this routine only if flash needs to be + * configured (don't call it if you want IDE). + * + * Entry: + * Exit: + * Destroys: + * + **************************************************************************/ +static void ChipsetFlashSetup(void) +{ + msr_t msr; + int i; + int numEnabled = 0; + + printk_debug("ChipsetFlashSetup++\n"); + for (i = 0; i < FlashInitTableLen; i++) { + if (FlashInitTable[i].fType != FLASH_TYPE_NONE) { + printk_debug("Enable CS%d\n", i); + /* we need to configure the memory/IO mask */ + msr = rdmsr(FlashPort[i]); + msr.hi = 0; /* start with the "enabled" bit clear */ + if (FlashInitTable[i].fType == FLASH_TYPE_NAND) + msr.hi |= 0x00000002; + else + msr.hi &= ~0x00000002; + if (FlashInitTable[i].fInterface == FLASH_IF_MEM) + msr.hi |= 0x00000004; + else + msr.hi &= ~0x00000004; + msr.hi |= FlashInitTable[i].fMask; + printk_debug("WRMSR(0x%08X, %08X_%08X)\n", FlashPort[i], msr.hi, msr.lo); + wrmsr(FlashPort[i], msr); + + /* now write-enable the device */ + msr = rdmsr(MDD_NORF_CNTRL); + msr.lo |= (1 << i); + printk_debug("WRMSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, msr.hi, msr.lo); + wrmsr(MDD_NORF_CNTRL, msr); + + /* update the number enabled */ + numEnabled++; + } + } + + /* enable the flash */ + if (0 != numEnabled) { + msr = rdmsr(MDD_PIN_OPT); + msr.lo &= ~1; /* PIN_OPT_IDE */ + printk_debug("WRMSR(0x%08X, %08X_%08X)\n", MDD_PIN_OPT, msr.hi, msr.lo); + wrmsr(MDD_PIN_OPT, msr); + } + printk_debug("ChipsetFlashSetup--\n"); + +} + + /* ***************************************************************************/ /* **/ /* * ChipsetGeodeLinkInit*/ @@ -202,7 +285,7 @@ ChipsetGeodeLinkInit(void){ } void -chipsetinit (void){ +chipsetinit (struct northbridge_amd_gx2_config *nb){ msr_t msr; struct msrinit *csi; int i; @@ -275,8 +358,9 @@ chipsetinit (void){ /* Flash Setup*/ - printk_err("NOT DOING ChipsetFlashSetup()!!!!!!!!!!!!!!!!!!\n"); -// ChipsetFlashSetup(); + printk_err("%sDOING ChipsetFlashSetup()!!!!!!!!!!!!!!!!!!\n", nb->setupflash? "NOT " : ""); + if (nb->setupflash) + ChipsetFlashSetup(); diff --git a/src/northbridge/amd/gx2/grphinit.c b/src/northbridge/amd/gx2/grphinit.c index 1d115c8c76..4e0da1789d 100644 --- a/src/northbridge/amd/gx2/grphinit.c +++ b/src/northbridge/amd/gx2/grphinit.c @@ -1,26 +1,32 @@ #include <arch/io.h> #include <stdint.h> - +#include <cpu/amd/vr.h> + #define VIDEO_MB 8 // MB of video memory -#define VRC_INDEX 0xAC1C // Index register -#define VRC_DATA 0xAC1E // Data register -#define VR_UNLOCK 0xFC53 // Virtual register unlock code -#define VRC_VG 0x02 // SoftVG Class -#define VG_MEM_SIZE 0x00 // bits 7:0 - 512K unit size, bit 8 controller priority - - /* * Write to a Virtual Register * AX = Class/Index * CX = data to write */ -static void vrWrite(uint16_t wClassIndex, uint16_t wData) +void vrWrite(uint16_t wClassIndex, uint16_t wData) { outl(((uint32_t) VR_UNLOCK << 16) | wClassIndex, VRC_INDEX); outw(wData, VRC_DATA); } + /* + * Read from a Virtual Register + * AX = Class/Index + * Returns a 16-bit word of data + */ +uint16_t vrRead(uint16_t wClassIndex) +{ + uint16_t wData; + outl(((uint32_t) VR_UNLOCK << 16) | wClassIndex, VRC_INDEX); + wData = inw(VRC_DATA); + return wData; +} /* * This function mirrors the Graphics_Init routine in GeodeROM. diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c index 6ef9d55596..a0ad84669f 100644 --- a/src/northbridge/amd/gx2/northbridge.c +++ b/src/northbridge/amd/gx2/northbridge.c @@ -12,7 +12,7 @@ #include <cpu/amd/gx2def.h> #include <cpu/x86/msr.h> #include <cpu/x86/cache.h> - +#include <cpu/amd/vr.h> #define VIDEO_MB 8 extern void graphics_init(void); @@ -120,6 +120,28 @@ struct msr_defaults { {0} }; +/* note that dev is NOT used -- yet */ +static void irq_init_steering(struct device *dev, uint16_t irq_map) { + /* Set up IRQ steering */ + uint32_t pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; + + printk_debug("%s(%08X [%08X], %04X)\n", __FUNCTION__, dev, pciAddr, irq_map); + + /* The IRQ steering values (in hex) are effectively dcba, where: + * <a> represents the IRQ for INTA, + * <b> represents the IRQ for INTB, + * <c> represents the IRQ for INTC, and + * <d> represents the IRQ for INTD. + * Thus, a value of irq_map = 0xAA5B translates to: + * INTA = IRQB (IRQ 11) + * INTB = IRQ5 (IRQ 5) + * INTC = IRQA (IRQ 10) + * INTD = IRQA (IRQ 10) + */ + outl(pciAddr & ~3, 0xCF8); + outl(irq_map, 0xCFC); +} + /* * setup_gx2_cache @@ -198,11 +220,12 @@ setup_gx2(void) msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20); wrmsr(0x40000029, msr); #endif +#if 0 msr = rdmsr(0x10000028); printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo); msr = rdmsr(0x40000029); printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo); - +#endif #if 1 /* fixme: SMM MSR 0x10000026 and 0x400000023 */ /* calculate the OFFSET field */ @@ -253,9 +276,11 @@ static void enable_shadow(device_t dev) static void northbridge_init(device_t dev) { + struct northbridge_amd_gx2_config *nb = (struct northbridge_amd_gx2_config *)dev->chip_info; printk_debug("northbridge: %s()\n", __FUNCTION__); enable_shadow(dev); + irq_init_steering(dev, nb->irqmap); } static struct device_operations northbridge_operations = { @@ -318,6 +343,7 @@ static void tolm_test(void *gp, struct device *dev, struct resource *new) *best_p = best; } +#if 0 static uint32_t find_pci_tolm(struct bus *bus) { struct resource *min; @@ -330,7 +356,7 @@ static uint32_t find_pci_tolm(struct bus *bus) } return tolm; } - +#endif #define FRAMEBUFFERK 4096 static void pci_domain_set_resources(device_t dev) @@ -380,8 +406,8 @@ static void pci_domain_set_resources(device_t dev) idx = 10; ram_resource(dev, idx++, 0, tolmk); } - assign_resources(&dev->link[0]); #endif + assign_resources(&dev->link[0]); } static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) @@ -417,33 +443,13 @@ static struct device_operations cpu_bus_ops = { void chipsetInit (void); -/* note that dev is NOT used -- yet */ -static void irq_init(struct device *dev, uint16_t irq_map) { - - /* Set up IRQ steering */ - uint32_t pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; - - printk_debug("OLPC REVA ENTER %s\n", __FUNCTION__); - - /* The IRQ steering values (in hex) are effectively dcba, where: - * <a> represents the IRQ for INTA, - * <b> represents the IRQ for INTB, - * <c> represents the IRQ for INTC, and - * <d> represents the IRQ for INTD. - * Thus, a value of irq_map = 0xAA5B translates to: - * INTA = IRQB (IRQ 11) - * INTB = IRQ5 (IRQ 5) - * INTC = IRQA (IRQ 10) - * INTD = IRQA (IRQ 10) - */ - outl(pciAddr & ~3, 0xCF8); - outl(irq_map, 0xCFC); -} - - static void enable_dev(struct device *dev) { printk_debug("gx2 north: enable_dev\n"); + void northbridgeinit(void); + void chipsetinit(struct northbridge_amd_gx2_config *nb); + void setup_realmode_idt(void); + void do_vsmbios(void); /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { struct northbridge_amd_gx2_config *nb = (struct northbridge_amd_gx2_config *)dev->chip_info; @@ -452,12 +458,11 @@ static void enable_dev(struct device *dev) /* cpubug MUST be called before setup_gx2(), so we force the issue here */ northbridgeinit(); cpubug(); - chipsetinit(); + chipsetinit(nb); setup_gx2(); /* do this here for now -- this chip really breaks our device model */ setup_realmode_idt(); do_vsmbios(); - irq_init(dev, nb->irqmap); graphics_init(); dev->ops = &pci_domain_ops; pci_set_method(dev); diff --git a/src/southbridge/amd/cs5536/chip.h b/src/southbridge/amd/cs5536/chip.h index c186ff31d7..1edb349ac7 100644 --- a/src/southbridge/amd/cs5536/chip.h +++ b/src/southbridge/amd/cs5536/chip.h @@ -1,6 +1,8 @@ #ifndef _SOUTHBRIDGE_AMD_CS5536 #define _SOUTHBRIDGE_AMD_CS5536 +#define MAX_UNWANTED_VPCI 10 /* increase if needed */ + extern struct chip_operations southbridge_amd_cs5536_ops; struct southbridge_amd_cs5536_config { @@ -18,6 +20,8 @@ struct southbridge_amd_cs5536_config { int usbf5_irq; /* f.5 */ int usbf6_irq; /* f.6 */ int usbf7_irq; /* f.7 */ + /* the following allow you to disable unwanted virtualized PCI devices */ + unsigned long unwanted_vpci[MAX_UNWANTED_VPCI]; }; #endif /* _SOUTHBRIDGE_AMD_CS5536 */ diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c index d5d0ae8255..9dcffd6fbc 100644 --- a/src/southbridge/amd/cs5536/cs5536.c +++ b/src/southbridge/amd/cs5536/cs5536.c @@ -9,22 +9,19 @@ #include <cpu/x86/msr.h> #include "chip.h" -static void southbridge_init(struct device *dev) -{ - printk_err("cs5536: %s\n", __FUNCTION__); - setup_i8259(); -} - #define PIN_OPT_IDE (1ULL<<0) /* 0 for flash, 1 for IDE */ /* Intended value for LBAR_FLSH0: 4KiB, enabled, MMIO, NAND, @0x20000000 */ +/* NOTE: no longer used, prune at some point */ msr_t flsh0 = { .hi=0xFFFFF007, .lo=0x20000000}; static void enable_ide_nand_flash(){ msr_t msr; printk_err("cs5536: %s\n", __FUNCTION__); +#if 0 + /* steve took this one out ... not sure if needed or not */ msr = rdmsr(MDD_LBAR_FLSH0); if ( ((msr.hi) & 7) != 7) { @@ -33,7 +30,7 @@ enable_ide_nand_flash(){ } msr = rdmsr(MDD_LBAR_FLSH0); printk_err("MDD_LBAR_FLSH0 is 0x%08x%08x\n", msr.hi,msr.lo); - +#endif msr = rdmsr(MDD_PIN_OPT); if (msr.lo & PIN_OPT_IDE) { printk_err("MDD_PIN_OPT was 0x%08x%08x\n", msr.hi,msr.lo); @@ -41,7 +38,7 @@ enable_ide_nand_flash(){ wrmsr(MDD_PIN_OPT, msr); } msr = rdmsr(MDD_PIN_OPT); - printk_err("MDD_LBAR_FLSH0 is 0x%08x%08x\n", msr.hi,msr.lo); + printk_err("MDD_PIN_OPT is 0x%08x%08x\n", msr.hi,msr.lo); msr = rdmsr(MDD_NANDF_DATA); if (msr.lo != 0x00100010) { @@ -63,6 +60,7 @@ enable_ide_nand_flash(){ printk_err("cs5536: EXIT %s\n", __FUNCTION__); } +#if 0 /* note: this is a candidate for inclusion in src/devices/pci_device.c */ void setup_irq(unsigned irq, char *name, unsigned level, unsigned bus, unsigned device, unsigned fn){ @@ -78,17 +76,23 @@ setup_irq(unsigned irq, char *name, unsigned level, unsigned bus, unsigned devic printk_err("%s: Can't find %s at 0x%x\n", __FUNCTION__, name, devfn); } } +#endif -static void southbridge_enable(struct device *dev) +static void southbridge_init(struct device *dev) { struct southbridge_amd_cs5536_config *sb = (struct southbridge_amd_cs5536_config *)dev->chip_info; - msr_t msr; + const unsigned char slots_cpu[4] = {11, 0, 0, 0}; + const unsigned char slots_sb[4] = {11, 5, 10, 10}; + msr_t msr; + int i; /* * struct device *gpiodev; * unsigned short gpiobase = MDD_GPIO; */ - printk_err("%s: dev is %p\n", __FUNCTION__, dev); + printk_err("cs5536: %s\n", __FUNCTION__); + setup_i8259(); + if (sb->lpc_serirq_enable) { msr.lo = sb->lpc_serirq_enable; msr.hi = 0; @@ -114,30 +118,49 @@ static void southbridge_enable(struct device *dev) } if (sb->enable_uarta){ - printk_err("%s: enable uarta, msr MDD_IRQM_YHIGH(%x) \n", + printk_err("cs5536: %s: enable uarta, msr MDD_IRQM_YHIGH(%x) \n", __FUNCTION__, MDD_IRQM_YHIGH); msr = rdmsr(MDD_IRQM_YHIGH); msr.lo |= 0x04000000; wrmsr(MDD_IRQM_YHIGH, msr); } - printk_err("%s: enable_ide_nand_flash is %d\n", __FUNCTION__, sb->enable_ide_nand_flash); + printk_err("cs5536: %s: enable_ide_nand_flash is %d\n", __FUNCTION__, sb->enable_ide_nand_flash); if (sb->enable_ide_nand_flash) { enable_ide_nand_flash(); } - /* irq handling */ - setup_irq(sb->audio_irq, "audio", 1, 0, 0xf, 2); - setup_irq(sb->usbf4_irq, "usb f4", 1, 0, 0xf, 4); - setup_irq(sb->usbf5_irq, "usb f5", 1, 0, 0xf, 5); - setup_irq(sb->usbf6_irq, "usb f6", 1, 0, 0xf, 6); - setup_irq(sb->usbf7_irq, "usb f7", 1, 0, 0xf, 7); - +#if 0 + /* irq handling */ + setup_irq(sb->audio_irq, "audio", 1, 0, 0xf, 2); + setup_irq(sb->usbf4_irq, "usb f4", 1, 0, 0xf, 4); + setup_irq(sb->usbf5_irq, "usb f5", 1, 0, 0xf, 5); + setup_irq(sb->usbf6_irq, "usb f6", 1, 0, 0xf, 6); + setup_irq(sb->usbf7_irq, "usb f7", 1, 0, 0xf, 7); +#else + /* CPU (80000800 = 00.01.00) */ + pci_assign_irqs(0, 0x01, slots_cpu); /* bus=0, device=0x01, slots={11,0,0,0} */ + + /* Southbridge (80007800 = 00.0F.00) */ + pci_assign_irqs(0, 0x0F, slots_sb); /* bus=0, device=0x0F, slots={11,5,10,10} */ +#endif + /* disable unwanted virtual PCI devices */ + for (i = 0; (i < MAX_UNWANTED_VPCI) && (0 != sb->unwanted_vpci[i]); i++) { + printk_debug("Disabling VPCI device: 0x%08X\n", sb->unwanted_vpci[i]); + outl(sb->unwanted_vpci[i] + 0x7C, 0xCF8); + outl(0xDEADBEEF, 0xCFC); + } } + +static void southbridge_enable(struct device *dev) +{ + printk_err("cs5536: %s: dev is %p\n", __FUNCTION__, dev); + } + static void cs5536_pci_dev_enable_resources(device_t dev) { - printk_err("cs5536.c: %s()\n", __FUNCTION__); + printk_err("cs5536: %s()\n", __FUNCTION__); pci_dev_enable_resources(dev); enable_childrens_resources(dev); } @@ -147,7 +170,7 @@ static struct device_operations southbridge_ops = { .set_resources = pci_dev_set_resources, .enable_resources = cs5536_pci_dev_enable_resources, .init = southbridge_init, - .enable = southbridge_enable, +// .enable = southbridge_enable, .scan_bus = scan_static_bus, }; |